RMS Installation using Retail Templates from RA

Hi,
I have pre-installed RA 13.2.3, and now I need to install RMS 13.2.3 in the same server (64 bit environment). So, I'm thinking of installing RMS in a different database instance in the same Oracle Software. Can I use the same Retail Template from RA to create a database instance for RMS ? The template includes the following files:
•     Retail_DB_Template_13.2.3_Linux_x86_64_Release.ctl
•     Retail_DB_Template_13.2.3_Linux_x86_64_Release.dbc
•     Retail_DB_Template_13.2.3_Linux_x86_64_Release.dfb
•     Retail_DB_Template_13.2.3_Linux_x86_64_Release_variables.txt
I tried using the template files from RMS, but the database instance installation fails. It goes on fine with template from RA, but I face problems with required patches installation during RMS Schema Creation phase. Can I or can't I use Retail Database Creation Templates from RA to create RMS database instance ?

Thanks ErikYkema,
Yes, RA means Retail Analytics. Installation Guide says "if you have these files already present, then you can continue with those". It would suggest that for database installation of all Retail Family, the same template would work if they have the same file names. I wouldn't have risked using the same template, but using the template from RMS throws me error, while the one with RA runs smoothly. So, I wanted to confirm. Thanks for your reply :)

Similar Messages

Is there a way to use old templates from Pages '09 in Pages 5.0?

Another surprise in Pages 5.0: When I choose one of the (many) templates I used in Pages '09 (v4.3), I get a message saying that the template is old and has to be used in Pages '09. So it looks like I'll need to redo all my templates if I want to use them in Pages 5.0. Is there an easier way?

Thank you for your reply, Peggy. Sorry about the delay in this response.
I opened P09>P09 Menu>General Preferences>For New Documents>Show Template Chooser>My Templates>chose old document (in this case, an envelope)>File>Save>entered a new name. I closed P09. Opened P5>chose to open with Show Document Chooser>My Templates>the new Template was not there. I went to Finder>Library....My Templates> the new document (envelope) was there, but it showed as an envelope, not like the other Templates (which showed the p5 logo with a small blue ruler at the bottom).
I was able to open a lot of my previous (newer) templates with P5 if I opened P5 to Show Template Chooser. But...when I Open P5>File>there is no "New from Template Chooser" in that File menu. That menu starts with New, Open..., and Recent. There is no "New from Template Chooser". In P09, I could be working on a Pages document, and could go File>and "New From Template Chooser" would be there. As I said, it's not present in P5.
Concerning the re-saving of an old template, is there anything else I should be doing? Secondly, is there a solution to my missing File choice for "New from Template Chooser"?

FCS 2 on Mavericks installed but I cannot use master templates from effect in the viewer

I have successfully(?) installed FCS 2 onto my new iMac running Mavericks and I've run all of the installers from the other discs and installed all of those components, templates etc.
I have opened previous projects and been able to render everything except any of the Motion master templates. So I tried to open some of them into the Viewer and found that they would not play. I have been able to open the same templates in Motion and run their QT versions from the desktop.
Why then, will they not run in FCP?
Any ideas out there?

When FCP begins to act in unexpected ways, the usual first step is to trash you FCP preferences.
You can download Preference Manager (free) from Digital Rebellion and it will do it for you from this link.
Your preferences will be reset to default the next time you launch FCP.
You also may want to run Software update and see if there are any updates for the apps you installed.
MtD

Templates from Pages disappeared?

I created a newsletter last October using a template from Pages and it was awesome. Now I'm trying to create another one and there are only 4 templates for newsletter. What happened to the rest that I saw in October? Did I lose them after upgrading to OS Mavericks? Where do I find them again?

Your version of Pages '08/'09 was upgraded to Pages 5.
Apple has removed over 90 features from Pages 5. Because Pages 5 can not do much of what was in Pages '09, Apple removed 2/3rds of the templates in Pages 5 and simplified the rest.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
If you had Pages '09 before, it should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter

Template From Earlier Version

My website was created using Dreamweaver MX in 2004 by someone who is no longer with our company. I am attempting to revise the site. I have loaded DW CS4 and am operating on Windows XP. I have created new pages using a template from MX version. The pages show up in my design view and in the local file list. They appear on the remote file list but the size says 0 KB (they say 10 KB on the local list). When I sync them, it says it works. When I "put" them for the upload, they will not. Is there a problem with using the template from the older version? Note: changes I made to existing pages (also created by this same template) upload fine and appear on the website.

When it asked if you want to put dependent files, it is asking if you want to upload any linked/imported css files,
any graphic files that might be used on the page, etc.
I you insert an image into a page, you will have to upload that to the webserver (ftp). If you select yes to put dependent files, then that is done for you by DW, otherwise, you will have to do it manually (select the file in the "files" menu and "put".
If your pages are on the web server, then it sounds like DW is doing what it is supposed to.
Jim

My kerning is off in Elements after using a template I purchased, how do I fix it? I've tried asian tools to no avail.

I used a template from an online shop that I ALWAYS buy my templates from, it screwed up the kerning on ALL my fonts. There is almost a full space between the letters. I've tried adjusting the asian options but it did absolutely nothing. What can I do? I have uninstalled and re-installed!

TexasCutie
You can try doing a PRAM reset. To do this shutdown your MBP. With your lefthand hold down the option+command keys. Power on the MBP, and immediately with your righthand little finger hold down the P key and with your righthand index finger hold down the R key. So you have the option+command keys and the P&R keys held down. Wait until you hear the Apple chime twice, release the keys and let the MBP boot up. Try that and see if it helps. Follow up and let us know if that worked for you.
Joseph

Office 2013 not downloading templates from AD RMS

Hi,
Im am using AD RMS onsatlled on Windows Server 2008 R2 SP1 and users are using windows 7 enterprise, office 2007 and office 2010. They can see right policy template with downloaded to outlook 2007 and outlook 2010.
But now I have installed office 2013 pro. plus and added new admx files to new gpo for office 2013 also enabled this policy "Enter Permission Policy Default Server for Quick Access Toolbar" and writing in the policy
\\rmsservername\templates_path But I cant receiving ad rms templates from my outlook?
Is server 2008 r2 sp1 ad rms compatible with office 2013 or am I have to install server 2012 ad rms for office 2013?
How can I fix this problem?

Hi Ahmad,
I have also been with same problem. According the link below i have shared. it says, it might take 1 to 7 days to replicate the template.
http://blogs.technet.com/b/rms/archive/2013/06/06/office-2013-ad-rms-client-2-x-and-template-distribution.aspx
Hope this will help to solve your answer. :)

AD RMS 2.1 - API Server is not Syncing templates from server

Hello, I couldn't find any information on this before, apologies if this is a duplicate response.
We have a server running AD RMS 2.1, it's currently set up in production mode. We have an API that runs on IIS in that box which protects documents, among other things. IIS is running using the ADRMSSVC user, our AD RMS install is running with the ADRMSAdmin
user.
We have created 4 templates that we wish for the API to make use of when protecting documents, however those templates do not appear to be available to the application. In doing a SafeNativeMethods.IpcGetTemplateList call, we're only actually seeing one
of them. The ADRMSAdmin user, while running powershell Get-RMSTemplates only sees the same template.
I have turned off every caching option I can find, but it appears that neither of these users "knows" about the templates that we have created through the server. I have even renamed the template which is showing up, and that name change is not
being reflected through the API or powershell. If I displace the %allusersprofile%/Microsoft/MSIPC/Server/Templates directory, I get an error through both those means that "The operation being requested was not performed because the user has not
been authenticated."
The machine is running in AWS - is it possible that resizing the machine has somehow voided the Machine Certificate, and therefore the machine cannot connect to ADRMS to get the new templates?
If it helps at all, I have exported the templates to a shared directory, and all 4 XML files that we have created show up there just fine.
Any help would be much appreciated.

i've been having this kind of problem as well. after so many troubleshooting, the problem is in the actual ADRMS webservices (/_wmcs/*).
microsoft's ADRMS werbservices is maintaining an internal cache instead of querying for the list of templates from its SQL database. This cache doesn't get sync'd with its ADRMS database even when we change CacheMonitorTimeInterval and other cache related
policies in DRMS_ClusterPolicies!
I've also changed all the web.config of /_wmcs/ webservices so that cache is disabled but this doesn't work as well.
The only way to make the sync happen is to perform an IISRESET. Only then will the new and updated templates are returned by ADRMS webservices. now, that's just really retarded! Should I write a piece of functionality to recycle the app pool after every
request from client applications including Excel.exe? wow!

Error when using the template installer MI post installation process

Hi all,
I am busy to configure the Netweaver Administrator in order to create setup packages for mobile devices. This is a WAS 6.40 ABAP JAVA instance with mobile infrastructure.
I have installed the netweaver SR1 and upgraded abap and java to SPS18 afterwards.
Afterwards I used the template installer, I executed: MI post installation process.
But when I did this an error message occured on the following node:
step ID 8 registering RFC connection.
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Here after I followed manual: MI25 SPS18 inst newtech.pdf for configuring the NWA.
I checked the complete manual, but still the error message occurs, when I am using the template installer.
There is one more thing.
When I go to the NWA, to the Mobile Infrastructure node, allmost all subnodes give me the following error:
(For instance on hierarchy grouping:)
Failed to get hierarchy group elements from middleware. Reason: Could not connect to middleware.
Does this error message relate to the other error message?
Please give me advise/hints/directions to solve this problem....
Your help will be appreciated!
Best regards,
Jacco Raymakers

I got error during use of template installer in NWA. It is MI post installation in N/w2004s SP09
Error message:
Element
'SAPConfigLib.<SID>.Unclassified.set_Server_Service':!BrokerImport.import_of_element_failed!!BrokerImport.Fehler!com.sap.tc.lm.ctc.cul.cpi.exceptions.CPIBaseException:
<--Localization failed:
ResourceBundle='com.sap.tc.lm.ctc.cul.cpi.CPIResourceBundle',
ID='com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION', Arguments:
[]--> : Can't find resource for bundle java.util.PropertyResourceBundle, key
com.sap.tc.lm.ctc.cul.cpi.BaseException_BASE_EXCEPTION:com.sap.tc.lm.ctc.provider.javaServiceProvider.JavaServiceWriter.writeElement!BrokerImport.LINE!179-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.86
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.broker.BrokerImport.importElement.128
-:com.sap.tc.lm.ctc.cul.serviceimpl.importservice.CULConfigurationImport.importConfiguration.89
-:com.sap.tc.lm.ctc.ccl.templateinstaller.StepExecuter.run.41 Element 'SAPConfigLib.<SID>.Unclassified.set_Server_Service':Error during executing Java Reflection:JCO.Client not connected in repository call
Please help me the resolve this.

How do you use templates from external hdd? (without copying them over)

When I installed DVD Studio Pro 4, I had to install the Templates, Styles, Transitions, etc... into an external for lack of space in my MBP. Now comes the time when I need to use those templates, so how do I access them without having to reimport them? Importing them copies the template files over from the external to the internal and I can't afford the space.

How did you install them onto an external? If you did it via the FCS installer, then DVDSP should automatically link to them. If you just copied them over, it would probably be easiest to jus reinstall from the original discs, this time telling it to put the additional content on your external.

My hard drive crashed and I am using a different machine. How do I retrieve my personalized Pages 5.2 templates from my backup drive? I have searched at length and can't seem to find them.

My hard drive crashed and I am using a different machine. How do I retrieve my personalized Pages 5.2 templates from my backup drive? I have searched at length and can't seem to find them.

login_directory = /Users/yourname
If the Library folder is not shown in your login directory, then open a Finder window, and press command+J. This will open a Finder View Options panel. On it, there is a selectable entry to Show Library Folder. Once this is selected, the Library folder will appear. Now, follow the instructions in my May 6 post. You will have to right-click on com.apple.iWork.Pages and choose Show Package Contents, before continuing.
Correction: login_directory/Library/Containers/com.apple.iWork.Pages/Data/Library/Applicatio n Support/User Templates/
The host software persists in changing the correct Application Support text above to Applicatio n Support, which does not exist.

Custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list

I am looking for custom sendemail in sharepoint 2013 designer workflow using dictionary object with email template from list
MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

Hi Greetings.
pls check if it helps you.
http://msdn.microsoft.com/en-us/library/office/jj554504(v=office.15).aspx
Please remember to click 'Mark as Answer' on the answer if it helps you

Hello, I installed LR5 on my Desktop PC (MAC) one year ago by upgrading from LR4 using a Download from the adobe store. Now I want to install LR5 on my laptop. Fir?st I used the LR4-Installation-CD. What´s next

Hello, I installed LR5 on my Desktop PC (MAC) one year ago by upgrading from LR4 using a Download from the adobe store. Now I want to install LR5 on my laptop. First I used the LR4-Installation-CD. What´s next? How can I upgrade to LR5?

Installing CleanMyMac was just about the worst thing you could do. Get rid of it: Re: cleanmymac2

Security violation from using underscores template

When using the template-function of the well-known underscore.js library I get an error:
Adobe AIR runtime security violation for JavaScript code in the application security sandbox (Function constructor).
In the browser this works fine. I don't see any security problems from using templates !?

I made some more tests: This code
var compiled = _.template("hello: <%= name %>");
air.trace(compiled({name : 'moe'}));
works when executed in $(document).ready (jQuery), but
it fails in the air.InvokeEvent.INVOKE-eventlistener, which
is always triggered after document-ready.
Seems that everything is fine until the AIR-part of the app
is up.

How to make a template from an existing document on my ipad Air 2 using word

I want to know if it's possible to make make a template from an existing document on my ipad Air 2 using the free microsoft word app.
Thank you

RAW import is not yet supported. Just guessing that this is what you were trying . - Guido

RMS Installation using Retail Templates from RA

Similar Messages

Maybe you are looking for