RN 10G-10G B2B Interface Error

Hi ,
We triggered a 3A4 Request from 10G Host to a 10G Remote TP . TP sent an Ack Back .
In Reports on the TP side we can see the message in “Process Ack” state and Acknowledgement in “Collab Wait” State .
On the host side we can see the 3A4 message in Wait Ack State .
When we saw the logs on Host side we can see the below error :
2013.03.12 at 06:40:49:193: Thread-10: B2B - (ERROR) Error -: AIP-51503: General Create Message Error
at oracle.tip.adapter.b2b.exchange.rnif11.RNExchangePlugin.updateRetryMessage(RNExchangePlugin.java:1984)
at oracle.tip.adapter.b2b.msgproc.Request.requestRetry(Request.java:2925)
at oracle.tip.adapter.b2b.engine.Engine.messageRetry(Engine.java:2816)
at oracle.tip.adapter.b2b.engine.Engine.handleTimeoutEvent(Engine.java:2690)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2445)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
Could anyone please help ?
Regards,
Rohith

We can see below errors as well :
2013.03.12 at 06:57:52:488: Thread-10: B2B - (ERROR) java.lang.NullPointerException
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.publishEventToWF(B2BWFEventManager.java:267)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.raiseWFEvent(CollaborationManager.java:759)
at oracle.tip.adapter.b2b.msgproc.Request.requestRetry(Request.java:3131)
at oracle.tip.adapter.b2b.engine.Engine.messageRetry(Engine.java:2816)
at oracle.tip.adapter.b2b.engine.Engine.handleTimeoutEvent(Engine.java:2690)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2445)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2013.03.12 at 06:57:52:490: Thread-10: B2B - (ERROR) Error -: AIP-50014: General Error: java.lang.NullPointerException
at oracle.tip.adapter.b2b.engine.Engine.messageRetry(Engine.java:2853)
at oracle.tip.adapter.b2b.engine.Engine.handleTimeoutEvent(Engine.java:2690)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2445)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.publishEventToWF(B2BWFEventManager.java:267)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.raiseWFEvent(CollaborationManager.java:759)
at oracle.tip.adapter.b2b.msgproc.Request.requestRetry(Request.java:3131)
at oracle.tip.adapter.b2b.engine.Engine.messageRetry(Engine.java:2816)
... 5 more
2013.03.12 at 07:03:53:095: Thread-10: B2B - (ERROR) Error -: AIP-50014: General Error
at oracle.tip.adapter.b2b.engine.Engine.messageRetry(Engine.java:2853)
at oracle.tip.adapter.b2b.engine.Engine.handleTimeoutEvent(Engine.java:2690)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2445)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
Regards,
Rohith

Similar Messages

ORACLE 10g : Datapump-Import : Error: unknown parameter name 'REMAP_TABLE'

Hi,
I am working on Oracle 10g. When executed import datapump script in the UNIX box with option “RMAP_TABLE” I received the error “unknown parameter name 'REMAP_TABLE' “Can you please give me solution for it?
Scripts :-
impdp eimsexp/xyz TABLES=EIMDBO.DIVISION DIRECTORY=DATAMART_DATA_PUMP_DIR DUMPFILE=expdp_DATAMART_tables_%u_$BATCH_ID.dmp LOGFILE=impdp_DATAMART_tables.log REMAP_TABLE=EIMDBO.DIVISION:EIM2DBO:YR2009_DIM_DIVISION
Note :- The YR2009_DIM_DIVISION table is available in the target database. It is without partition table. The EIMDBO.DIVISION is partition table.
Thanks,

See your post here
ORACLE 10g : Datapump-Import : Error: unknown parameter name 'REMAP_TABLE'
Srini

Invoking 10g B2B from SOA 11g

Hi,
Greetings to B2B Gurus!!!
We have a requirement to invoke 10g B2B (10.1.2) from SOA 11g.Is it possible to invoke 10g B2B from SOA 11g? If so, what all are necessary patches which needs to applied in order make it compatible?
Any Input on this is highly appreciated.
Thanks,
Saravana

Hi Saravana,
You cannot configure 2 different hosts in B2B 11g as well however B2B 11g has out-of-box support for hub mode integration. You may like to refer -
https://blogs.oracle.com/oracleb2bgurus/entry/implementing_oracle_b2b_11g_as
Regards,
Anuj

B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParseException: Start of root element expected.

Dear All,
I am a beginner to Oracle B2B.
I have created an agreement to Recieve 852, Product Activity data(POS) from one of the Trading partner. This is an inbound process.
A SOA composite application is created to Recieve the data and insert into perticular columns of the database table using database adapter.
I have tested the Interface with some couple of file and it went perfect without any error. Now I have to test the interface with some other files.
This time also I am not getting any error in Business Message, Wire message and Application message but the composite application is not picked.
The log file shows : B2B-50029: B2B runtime error: oracle.xml.parser.v2.XMLParserException: Start of root element expected.
Please let me know if anyone has faced this issue. it will be of great help.
Thanks,
Abhas Kushwaha

Hello,
Just a thought, When I had the similar problem, it appeared to be a BOM (Byte order mark - Wikipedia, the free encyclopedia) in the xml file, which is the very first character in the xml file, so the file was not identified to be a valid xml file. Removing the BOM from the xml file fixed my problem, however, I did not spend much time in fixing using B2B, the vendor (sender of the file) fixed the file and started sending without BOM. So my work was easier.
The character is not visible in all XML editors, however, it was visible in JDeveloper. I used a tool to identify and remove during testing until the vendor fixed the file, the tool is called file bom detector,http://www.bryntyounce.com/filebomdetector.htm
Hope this helps,
Thanks,
Venkatesh

Interface errors (crc, in/output, collisions etc.) via snmp

Hi,
I'm trying to understand how to get interface errors via SNMP. I do get stats via SNMP for ifInErrors / ifOutErrors etc, but I'm trying to get output via SNMP for the errors visible via the 'sh int x' command - CRC errors, input / output errors, collisions, runts. giants etc.).
1) The SNMP ifInError / ifOutError seems to give an overall counter of all errors from the time the device has started - Am I correct about this?
2) Is there any way I can get the interface-specific errors noted above via SNMP?
Thanks,
Mario

Depends on the device and version of code, but most likely you will get what you want from the CISCO-IF-EXTENSION-MIB. Look at objects like cieIfInRuntsErrs, cieIfInGiantsErrs, and cieIfInFramingErrs. You will also get some ethernet-specific errors from the ETHERLIKE-MIB.

Interface errors

Is there an script that can monitor interface errors (input and output errors) and send an email out when it reaches threshold?
Thanks
Sent from Cisco Technical Support iPhone App

Sure. Here's an example:
event manager applet error_monitor_GigabitEthernet0/1
event interface name GigabitEthernet0/1 parameter input_errors entry-op ge entry-val 5 entry-type increment poll-interval 10
action 2.0 cli command "enable"
action 3.0 cli command "show int GigabitEthernet0/1 | inc error"
action 4.0 mail server 10.1.1.1 from [email protected] to [email protected] subject "Errors on interface GigabitEthernet0/1" body "
Interface GigabitEthernet0/1 has seen $_interface_delta_value input errors in the past 10 seconds: $_cli_result"

Open DeviceNet interface error when TestStand call VIs of NI PCI-8532

Hello,
We use NI PCI-8532 was used as DeviceNet master to do functionality test with a slave (AC Drive).
But when open DeviceNet interface, it happen the error.
We can't find the solution and hope to find help from you.
The basic sequence in TestStand is:
1). Call "Open DeviceNet Interface.vi" to open interface and creat interface object.
Interface(master) setting: interface name=dnet0, MAC ID=0, baudrate=125000bps
2). Call "Open DeviceNet IO.vi" to creat DeviceNet IO object.
Device(slave) setting: MAC ID=63
3). Call "Operate DeviceNet Interface.vi" and operation code=start
4). Call "Wait For State.vi"
5). Call "Read DeviceNet IO.vi" to read data from IO object
6). Call "Close Object.vi" to close IO object handle
7). Call "Close Object.vi" to close interface object handle
Remark, these DeviceNet VIs locates at "C:\Program Files\National Instruments\LabVIEW 2012\vi.lib\DeviceNet\VIAPI".
First time to run sequece in TestStand, it can pass to run step 1) to open DeviceNet interface.
But once there is some error with these steps, and it will happen "Open DeviceNet Interface" error (error code=0xBFF62006) when run these steps again.
Then even use LabVIEW DeviceNet example to test, and it happen the same error except restart computer.
The DeviceNet example locates at "C:\Program Files\National Instruments\LabVIEW 2012\examples\NI-Industrial Communications for DeviceNet\Basic Examples\PXI & PCI\MixedCommunication.vi".
Some information more:
PC operate system: Windows XP SP3
LabVIEW version: 2012 SP1
TestStand version: 2012 SP1
PCI 8532 driver version: 2.3.0
Other installed PCI board: PCI 8531 CANOpen

The following errors may be resolved by resetting the CAN, DeviceNET or LIN device:
Error -1074388986 occurred at ...
NI-CAN: (Hex 0xBFF62006) The object is already open in another application. Solutions: Ensure that only one application at a time uses an object , and that you close all objects prior to exiting your application (don't use LabVIEW toolbar's Abort button).
Error -1074388969 occurred at ...
NI-CAN: (Hex 0xBFF62017) This attribute's value must be provided prior to the Open. Solutions: Set the attribute using the Config function before the Open, and do not set the attribute at any later time; Do not configure multiple CAN Objects for the same ID.
SO,you should reset the DeviceNet.
And another similar issue can explain some points of your problem http://digital.ni.com/public.nsf/allkb/7D9383E9BEAD0B21862571640002F687?OpenDocument

B2B-50029: B2B runtime error

Hello All,
In Order to better understand the channal concept in 11g , I tried creating a simple OutBound case wherein a file will be picked up from c:\temp2 folder and will be written to c:\temp1 folder.
1. Created One Generic File 1.0 Listening Channal and selected 'Internal' checkbox. Folder name = c:\temp2
2. Defined Custom--->1.0---->PurchaseOrder----->PurchaseOrderDef
And in the PurchaseOrder (Document Type) tab, in the ebMS Section, I have filled the following values...
Action Name : PurchaseOrder
Service Name : PurchaseOrder
From Role : OracleServices
To Role: MarketInc
And in the definition tab, i have given the following values...
xsd : po.xsd
Identification xpath expression : /*[local-name()='PurchaseOrder']
3. For Trading Partner 'MarketInc' i have created a channel with Generic File 1.0 protocol. Folder name= c:\temp1
4. Created an agreement for MarketInc, selected the File channel for MarketInc , selected the document definition and deployed the code. Sender is OracleServices and Receiver is MarketInc.
When I kept a file OracleServices_1234.txt in c:\temp2, it is getting picked up but B2B report is not showing anything, neither this file has been written to c:\temp1. I also could not see any message in IP_OUT_QUEUE. I also tried with MarketInc_1234.txt withot luck.
In 'Application Messgae' TAB of report section , I see record with Direction 'OUTBOUND' and State as 'MSG_COMPLETE'.
I am seeign below error message in command prompt
<Feb 13, 2012 6:40:04 PM IST> <Error> <oracle.soa.b2b.engine> <BEA-000000> <Erro
r -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:365)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:
198)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1
415)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:800)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3785)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3127)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecu
tor.java:619)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:
220)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Error -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:365)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:
198)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1
415)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:800)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3785)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:3127)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecu
tor.java:619)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:
220)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run
(WorkManagerExecutor.java:120)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManag
er.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
>
Transaction rollback 094FB17613576D33C9A0000020C70000
Please help me to fix and understand this.
Thanks a lot in advance...
Naveen

When I kept a file OracleServices_1234.txt in c:\temp2, it is getting picked up but B2B report is not showing anything, neither this file has been written to c:\temp1. I also could not see any message in IP_OUT_QUEUE. I also tried with MarketInc_1234.txt withot luck.Filename is incorrect. By default Oracle B2B expects, filename in below format for outbound case -
<RemoteTPname>_<DocType>_<DocTypeRevision>_<MsgType>_<MsgID>.<AnyFileExtn>
So in your case, filename should be -
MarketInc_PurchaseOrder_1.0_1_12345.xml
You may refer -
http://www.oracle.com/technetwork/middleware/b2b-integrations/learnmore/tnb2b11g002-326857.pdf
Regards,
Anuj

Can't burn CD's - "Interface error 5"

Hello, I haven't used my old firewire LaCie CD burner (LaCie 1394, blue front with the slide out tray) in a while but recently I needed to put some graphics files on a CD. The sw I'm using is Toast 6. No matter what I tyry to do I get the following message: "Interface Error: 5 The connection is not stable"
I tried different CD brands, no effect.
This is the setup.
Machine Name: Power Mac G4 Cube
Machine Model: PowerMac5,1
CPU Type: PowerPC 60? (1.1)
CPU Speed: 1.3 GHz
L2 Cache (per CPU): 512 KB
L3 Cache (per CPU): 2 MB
Memory: 1.25 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.1.9f1
System Version: Mac OS X 10.4.2 (8C46)
Kernel Version: Darwin 8.2.0
Looking for answers I found an (unanswered) message on a macosx.com forum. I'm reposting it because it provides more info about the same problem:
[quote]
"Burning the disc failed because communication to the disc drive failed. (Error code 0x80020022)" -- Is the error code when I attempt to burn any disc using the Finder or Disk Utility.
"Interface Error: 5 The connection is not stable.
The drive reported an error:
Sense Key = Illegal Request
Sense Code = 0x210x02
BUFFER UNDERRUN" --
Are the errors when I attempt to use Toast Titanium v6.x and v7.x.
I'm using an iMac G5 running 10.4.2. I have two burners, both of which give me the errors and will no longer burn to CD's or DVD's (cheap or expensive media, I've tried many different types). The burners i have are an internal superdrive that came with the mac (MATSHITA DVD-R UJ-825) and an external LaCie Firewire DL drive (_NEC DVD_RW ND-3500AG). Both drives started giving this error at the same time and I can't think of anything that I installed that could effect these. I don't have any speed tools installed.
I have tried all that Apple suggests in the articles http://docs.info.apple.com/article.html?artnum=25750.
I've experienced the same errors twice before, though not both drives at the same time. What fixed it the first time was simply upgrading the firmware on the burner. Second time, there were problems on the hard drive that I was burning from (directory issues if i remember) and running a combination of Tech Tool and Disk Utilitity fixed that.
But this time, I'm at my wits end and can't find anything helpful online. I'm hoping to find an answer before I end up trying a complete system reinstall.
Any info would be greatly appreciated.
[/quote]
Yes, any info ...
TIA
Cube, 2 ibooks Mac OS X (10.4.2)

I'm having the same problem using Toast 7 to burn a Video TS movie I made. I'm using an external Lacie 16X DVD-R DL drive and an iMac G5 2.0, and Mac OS 10.4.3
After several failures with Interface Error 5, I tried copying a DVD movie I made from another DVD. This was created with the same Lacie drive using Mac OS 10.3 and my old iMac FP 15 inch. I got the same failure message.
I then switched my Lacie Drive to the USB port and everything is working fine. I switched it back to FireWire and I get the same error message again.
I can play DVD's on the Lacie with either the USB or FireWire port without any problem, I just can't record using the FireWire port. The FireWire ports on the computer work fine with all my other FireWire devices.
It must be a combination of 10.4.3, Toast 7 and Lacie FireWire. I'm going to recheck Lacie's site to make sure I have all of the updates.
iMac G5 Mac OS X (10.4.2) Mac OS 10.4.3

EEM interface errors not matching

I have the event applet configured below. I test by changing the controller time-slots to 1-15 instead of 1-24 in order to generate errors on my Serial0/1/0:0 interface. Errors are generated, but the eem applet does not match even though the errors are incrementing. I've turned on all suggested eem debugging and it shows 0 matches while I can see that the interface is incrementing the errors that should be triggering the actions from the eem.
configuration:
event manager applet multiple_if
event tag if_1 interface name Serial0/1/0:0 parameter input_errors_crc entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_2 interface name Serial0/1/0:0 parameter input_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_3 interface name Serial0/1/0:0 parameter input_errors_frame entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_4 interface name Serial0/1/0:0 parameter input_errors_overrun entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_5 interface name Serial0/1/0:0 parameter output_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_6 interface name Serial0/1/0:0 parameter output_errors_underrun entry-op ge entry-val 2 entry-type increment poll-interval 60
trigger
action 100 cli command "enable"
action 200 cli command "config t"
action 300 cli command "int Serial0/1/0:0"
action 400 cli command "description script worked!"
action 500 syslog msg "CRC failure leased line $_interface_name"
action 600 mail server "$_mail_smtp" to "$_mail_rcpt" from "$_info_routername@$_mail_domain" subject "ALERT: Serial Interface $id shutdown due to excessive interface error rate" body "\n$_syslog_msg"
action 999 end
debug ouput:
Jun 20 14:20:48 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:20:48 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:21:00 EDT: fh_fd_timer_process_async
Jun 20 14:21:00 EDT: cron_tick: num_matches 0
Jun 20 14:21:22 EDT: %HSRP-5-STATECHANGE: FastEthernet0/0.4 Grp 4 state Standby -> Active
Jun 20 14:21:22 EDT: fh_fd_syslog_event_match: num_matches = 0
Jun 20 14:21:22 EDT: fh_fd_data_syslog: num_matches = 0
Jun 20 14:22:00 EDT: fh_fd_timer_process_async
Jun 20 14:22:00 EDT: cron_tick: num_matches 0
Jun 20 14:23:00 EDT: fh_fd_timer_process_async
Jun 20 14:23:00 EDT: cron_tick: num_matches 0
Jun 20 14:24:00 EDT: fh_fd_timer_process_async
Jun 20 14:24:00 EDT: cron_tick: num_matches 0
output showing interface errors:
csc-lab01#sh int s0/1/0:0
Serial0/1/0:0 is up, line protocol is up
Hardware is GT96K Serial
Internet address is x.x.x.x/30
MTU 1500 bytes, BW 1536 Kbit/sec, DLY 20000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
Encapsulation PPP, LCP Open
Listen: CDPCP
Open: IPCP, loopback not set
Keepalive set (10 sec)
CRC checking enabled
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 02:44:23
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: Class-based queueing
Output queue: 0/1000/0 (size/max total/drops)
30 second input rate 2000 bits/sec, 3 packets/sec
30 second output rate 2000 bits/sec, 2 packets/sec
     9139 packets input, 1049231 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     224 input errors, 224 CRC, 117 frame, 95 overrun, 0 ignored, 81 abort
     10737 packets output, 1511507 bytes, 0 underruns
     0 output errors, 0 collisions, 15 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions
Timeslot(s) Used:1-24, SCC: 0, Transmitter delay is 0 flags

A few other things I noticed. Try this:
event manager applet multiple_if
event tag if_1 interface name Serial0/1/0:0 parameter input_errors_crc entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_2 interface name Serial0/1/0:0 parameter input_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_3 interface name Serial0/1/0:0 parameter input_errors_frame entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_4 interface name Serial0/1/0:0 parameter input_errors_overrun entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_5 interface name Serial0/1/0:0 parameter output_errors entry-op ge entry-val 2 entry-type increment poll-interval 60
event tag if_6 interface name Serial0/1/0:0 parameter output_errors_underrun entry-op ge entry-val 2 entry-type increment poll-interval 60
trigger occurs 1
correlate event if_1 or event if_2 or event if_3 or event if_4 or event if_4 or event if_5 or event if_6
action 100 cli command "enable"
action 200 cli command "config t"
action 300 cli command "int Serial0/1/0:0"
action 400 cli command "description script worked!"
action 401 set syslog_msg "CRC failure leased line $_interface_name"
action 500 syslog msg "$syslog_msg"
action 501 info type routername
action 600 mail server "$_mail_smtp" to "$_mail_rcpt" from "$_info_routername@$_mail_domain" subject "ALERT: Serial Interface $_interface_name shutdown due to excessive interface error rate" body "\n$syslog_msg"

Can we set the Option "Show add-in user interface errors" with VBA?

Does anyone know if the advanced Option "Show add-in user interface errors" can be set with VBA in Project Pro 2013?
\Spiro Theopoulos, Montreal, QC (Canada)

Spiro,
Sorry but as far as I know that option is not available through VBA.
John

B2B-51507 Error : Incomplete Internal-Properties structure.

Hi,
I send 997 AS2 by manual. And get below error.
B2B-51507 Error : Incomplete Internal-Properties structure.
ERROR_LEVEL_COLLABORATION
ERROR Error Brief : XEngine error.
below is 997 xml .
<?xml version="1.0" encoding="UTF-8"?><Transaction-997 xmlns="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49 guideline.xsd" XDataVersion="1.0" Standard="X12" Version="V5010" CreatedDate="2012-08-05T04:41:46" CreatedBy="XEngine_4016" GUID="{29D665AA-E4A3-41B5-A60A-8CE56C349249}"><Internal-Properties><Data-Structure Name="Interchange"><Lookup Name="InterchangeControlVersion">00501</Lookup><Lookup Name="InterchangeReceiverID">6111470100 </Lookup><Lookup Name="InterchangeReceiverQual">08</Lookup><Lookup Name="InterchangeSenderID">Sinotrans </Lookup><Lookup Name="InterchangeSenderQual">02</Lookup><Lookup Name="InterchangeUsageIndicator">I</Lookup><Lookup Name="Standard">X12</Lookup><Property Name="ElementDelimiter">0x2a</Property><Property Name="InterchangeAckRequested">0</Property><Property Name="InterchangeAuthorizationInfo">0000000000</Property><Property Name="InterchangeAuthorizationInfoQual">00</Property><Property Name="InterchangeChildCount">1</Property><Property Name="InterchangeComponentElementSep">0x5c</Property><Property Name="InterchangeControlNumber">000000001</Property><Property Name="InterchangeControlStandard_RepeatingSeparator">^</Property><Property Name="InterchangeControlVersion">00501</Property><Property Name="InterchangeDate">120804</Property><Property Name="InterchangeReceiverID">6111470100 </Property><Property Name="InterchangeReceiverQual">08</Property><Property Name="InterchangeSecurityInfo">0000000000</Property><Property Name="InterchangeSecurityInfoQual">00</Property><Property Name="InterchangeSenderID">Sinotrans </Property><Property Name="InterchangeSenderQual">02</Property><Property Name="InterchangeTime">2259</Property><Property Name="InterchangeTrailerControlNumber">000000001</Property><Property Name="InterchangeUsageIndicator">I</Property><Property Name="RepeatingSeparator">0x5e</Property><Property Name="SegmentDelimiter">0x0d0x0a</Property><Property Name="Standard">X12</Property><Property Name="SubelementDelimiter">0x5c</Property></Data-Structure></Internal-Properties><Segment-ISA><Element-I01>00</Element-I01><Element-I02>0000000000</Element-I02><Element-I03>00</Element-I03><Element-I04>0000000000</Element-I04><Element-I05>02</Element-I05><Element-I06>Sinotrans </Element-I06><Element-I05_1>08</Element-I05_1><Element-I07>6111470100 </Element-I07><Element-I08>120804</Element-I08><Element-I09>2259</Element-I09><Element-I65>^</Element-I65><Element-I11>00501</Element-I11><Element-I12>000000001</Element-I12><Element-I13>0</Element-I13><Element-I14>I</Element-I14><Element-I15>\</Element-I15></Segment-ISA><Segment-GS><Element-479>FA</Element-479><Element-142>Sinotrans</Element-142><Element-124>6111470100</Element-124><Element-373>20120805</Element-373><Element-337>0437</Element-337><Element-28>1</Element-28><Element-455>T</Element-455><Element-480>005010</Element-480></Segment-GS><Segment-ST><Element-143>997</Element-143><Element-329>0001</Element-329><Element-1705>001</Element-1705></Segment-ST><Segment-AK1><Element-479_1>AA</Element-479_1><Element-28_1>98463053</Element-28_1><Element-480_1>001000</Element-480_1></Segment-AK1><Loop-AK2><Segment-AK2><Element-143>100</Element-143><Element-329>Transacti</Element-329><Element-1705>001</Element-1705></Segment-AK2><Loop-AK3><Segment-AK3><Element-721>SEG</Element-721><Element-719>59981514</Element-719><Element-447>Loop</Element-447><Element-720>1</Element-720></Segment-AK3><Segment-AK4><Composite-C030><Element-722>16</Element-722><Element-1528>9</Element-1528><Element-1686>21</Element-1686></Composite-C030><Element-725>16</Element-725><Element-723>1</Element-723><Element-724>Copy of Bad Data Element</Element-724></Segment-AK4></Loop-AK3><Segment-AK5><Element-717>A</Element-717><Element-718>1</Element-718><Element-718_1>1</Element-718_1><Element-718_2>1</Element-718_2><Element-718_3>1</Element-718_3><Element-718_4>1</Element-718_4></Segment-AK5></Loop-AK2><Segment-AK9><Element-715>A</Element-715><Element-97>208</Element-97><Element-123>52742</Element-123><Element-2>6</Element-2><Element-716>1</Element-716><Element-716_1>1</Element-716_1><Element-716_2>1</Element-716_2><Element-716_3>1</Element-716_3><Element-716_4>1</Element-716_4></Segment-AK9><Segment-SE><Element-96>8</Element-96><Element-329>0001</Element-329></Segment-SE><Segment-GE><Element-97_1>1</Element-97_1><Element-28>1</Element-28></Segment-GE><Segment-IEA><Element-I16>1</Element-I16><Element-I12>000000001</Element-I12></Segment-IEA></Transaction-997>
Thank you very much!
wanggang

Please try without internal properties.
<?xml version="1.0" encoding="UTF-8"?><Transaction-997 xmlns="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="urn:oracle:integration:b2b:178CDEA78FDA4DF38610F2D26CA63B49 guideline.xsd" XDataVersion="1.0" Standard="X12" Version="V5010" CreatedDate="2012-08-05T04:41:46" CreatedBy="XEngine_4016" GUID="{29D665AA-E4A3-41B5-A60A-8CE56C349249}"><Segment-ISA><Element-I01>00</Element-I01><Element-I02>0000000000</Element-I02><Element-I03>00</Element-I03><Element-I04>0000000000</Element-I04><Element-I05>02</Element-I05><Element-I06>Sinotrans </Element-I06><Element-I05_1>08</Element-I05_1><Element-I07>6111470100 </Element-I07><Element-I08>120804</Element-I08><Element-I09>2259</Element-I09><Element-I65>^</Element-I65><Element-I11>00501</Element-I11><Element-I12>000000001</Element-I12><Element-I13>0</Element-I13><Element-I14>I</Element-I14><Element-I15>\</Element-I15></Segment-ISA><Segment-GS><Element-479>FA</Element-479><Element-142>Sinotrans</Element-142><Element-124>6111470100</Element-124><Element-373>20120805</Element-373><Element-337>0437</Element-337><Element-28>1</Element-28><Element-455>T</Element-455><Element-480>005010</Element-480></Segment-GS><Segment-ST><Element-143>997</Element-143><Element-329>0001</Element-329><Element-1705>001</Element-1705></Segment-ST><Segment-AK1><Element-479_1>AA</Element-479_1><Element-28_1>98463053</Element-28_1><Element-480_1>001000</Element-480_1></Segment-AK1><Loop-AK2><Segment-AK2><Element-143>100</Element-143><Element-329>Transacti</Element-329><Element-1705>001</Element-1705></Segment-AK2><Loop-AK3><Segment-AK3><Element-721>SEG</Element-721><Element-719>59981514</Element-719><Element-447>Loop</Element-447><Element-720>1</Element-720></Segment-AK3><Segment-AK4><Composite-C030><Element-722>16</Element-722><Element-1528>9</Element-1528><Element-1686>21</Element-1686></Composite-C030><Element-725>16</Element-725><Element-723>1</Element-723><Element-724>Copy of Bad Data Element</Element-724></Segment-AK4></Loop-AK3><Segment-AK5><Element-717>A</Element-717><Element-718>1</Element-718><Element-718_1>1</Element-718_1><Element-718_2>1</Element-718_2><Element-718_3>1</Element-718_3><Element-718_4>1</Element-718_4></Segment-AK5></Loop-AK2><Segment-AK9><Element-715>A</Element-715><Element-97>208</Element-97><Element-123>52742</Element-123><Element-2>6</Element-2><Element-716>1</Element-716><Element-716_1>1</Element-716_1><Element-716_2>1</Element-716_2><Element-716_3>1</Element-716_3><Element-716_4>1</Element-716_4></Segment-AK9><Segment-SE><Element-96>8</Element-96><Element-329>0001</Element-329></Segment-SE><Segment-GE><Element-97_1>1</Element-97_1><Element-28>1</Element-28></Segment-GE><Segment-IEA><Element-I16>1</Element-I16><Element-I12>000000001</Element-I12></Segment-IEA></Transaction-997>
Regards,
Anuj

Help: Net.lib interface error

Hi!
I'm using the Palm Emulator to make a HTTP connection to my servlet. The same MIDlet works on my Palm, but when I run it on the emulator (in order to some screen captures), I get error mesg that says "Net.lib interface error: 0x0000120C", followed by java.io.IOException.
I've already set my proxy IP ...
Can someone pls help? TIA!
Rgds

Hi ....
Is anyone have any ideas to solved if this problem occur on the real palm m505 machine ??
Please advice and kindly reply
Thank
SL

B2B Inbound Error : Need Clarification

Hi All,
I would like to illustrate a particular use case for B2B Inbound Errors and if there is any workaround available to get over the problem. We are using B2B version 10.1.2
Use Case Details</strong1. Consider the scenario wherein we have a Inbound EDI File which has 100 transactions in it. B2B reads the file and automatically debatches into individual transactions and processes them separately.
2. Out of the 100 transactions in the input file, if say 5 transactions are error transactions, we have observed that all the 100 transactions error out in B2B.
3. The 95 correct transactions fail with the error "General Validation Error" and the 5 error transactions have the exact error details in the B2B Message Reports.
4. Ideally, B2B should error out only the 5 error transactions and process rest of the 95 transactions without allowing them to fail with "General Validation Error".
I am sure that most of us must have faced this error. Could someone please let me know the folllowing:
1. Is there any setting in B2B by which we can enable it to error out only the transactions which have valid errors in a single file
2. Is there any other workaround that we can take to avoid this issue.
The reason we need to have a solution for this is because in our Production B2B environment we receive inbound files from Trading Partners which have hundreds of transactions in each file.
If, even a single transaction has error, then the whole file errors out and it is quite cumbersome to browse through the B2B Message Reports to get the exact error transaction because all the correct transactions would failed with error "General Validation Error".
Please let me know the inputs.
Thanks,
Dibya

Hi Ramesh,
Thanks for the clarification and information. We have already set the parameter OneErrorAllError = true and my understanding was that if we set this parameter to TRUE, it means that if one transaction in the OUTBOUND batch errors out then the whole batch will error out.
I was not aware that it also holds true for INBOUND. Is there any other way that we can set this parameter based on direction (INBOUND or OUTBOUND).
We would like to have this parameter set for OUTBOUND and disabled for INBOUND Transactions.
Please let me know. Thanks Again.
Regards,
Dibya

What types of Interface Errors lead to Input/Output Drops/Discards?

Hi All,
I was wondering if anyone knows if all of the following errors would lead to packet drops/discards.
Runts
Giants
Framing Errors
Overrun Errors
Abort Errors
Also, are there any types of interface errors that don't lead to packet drops/discards?
So if all interface errors lead to packet drops/discards, I may not have to poll for multiple OIDs for these errors, but instead just poll for packet drops/discards.
Any insight would be appreciated.
Thanks,
David

ifInDrops do not related to errors. In fact, ifInDiscards specifically count packets that were discarded without an associated error. This could be due to a lack of buffer space (e.g. no queue slot), or there was no listener for a TCP connection. The same is true for ifOutDiscards.
For a consolidated error count, look at ifInErrors and ifOutErrors. It will depend on the interface/encapsulation type as to what exactly will be counted as an error, but anything that would be an encap-specific error should appear in one of the interface error counters.

RN 10G-10G B2B Interface Error

Similar Messages

Maybe you are looking for