RNIF Service Header data

Hi experts,
Can somebody help me in finding how to get the RNIF Service Header data in XI, when i get a message from a RNIF compliant system?
Regards,
Ravi

Hi Ravi,
Please see these..
Delivery and Service Header Fields in RNIF Receiver Adapter for Rosettanet.
Accessing Message Header fields from envelope
cheers,
prashanth

Similar Messages

RNIF Service Header

Hello,
I'm using a CIDX message wrapped by RNIF preamble & service header. In case of inbound scenarios, how does the preamble & the service header structures get populated?
Is it done by the CIDX receiver adapter? If yes, then how can those structures be configured
Regards,
SAP Consultant

Hi XI Experts,
I am also looking for this information. Can anybody throw some light on this?
Regards,
Suraj Kumar

Delivery and Service Header Fields in RNIF Receiver Adapter for Rosettanet.

Hello all,
I need to populate the Delivery and Service header fields in Rosattenet MIME message in the receiver side.
For the sender side RNIF adapter, we can very well use the Adapter Specific message to get those fields from Rosattenet MIME message. But in my scenario, I need to use RNIF as the receiver, which will pick messages from other system and post it to RNIF.
Also, I have checked the receiver RNIF adapter, there I dont find any adapter specific messages to use.
Regards,
UP

Prasad
You have not mentioned which RNIF Adapter you are using whether 1.1 or 2.0. I will assume that you are using 2.0.
If you are using Single action responder the parameters you should configure is given here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/70/d89d40c1252a54e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/fa/6b98403de08368e10000000a1550b0/content.htm
If you are using Two action responder the parameters you should configure is given here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/6f/dc9d40759c2b54e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/7198403de08368e10000000a1550b0/content.htm
---Satish

Service Header Fields in RNIF Receiver Adapter.

Hi experts,
Can somebody help me in how to get the pipInstanceId in Service Header of receiver message should be same as pipInstanceId in the Service Header of sender message.
How to overwrite the PIPInstanceIdentifier in the Service Header of RNIF adapter in receiver side.
Thanks&Regards
SudhaG.

Hi,
Better try for Header Mapping concepts.
Fro more clarification:
http://help.sap.com/saphelp_nw04/helpdata/EN/5d/112d20f6ce6c46ba66afb98d278fbd/content.htm
Thanks,
Boopathi

ECC - Service Header and Item data

We need to extract service order data from ECC. One definite candidate data source we have found is:
2LIS_18_I3HDR
Other possible candidates are:
2LIS_18_I3OPER and
0CS_OM_OPA_1
Is there anyone who has extracted service order data in their project.
1.     Can you please list down the standard extractors that you used.
Thanks in advance
Ahmed pasha

Hi,
You are wright as mentioned above you can extract Customer Service data following extractor
Master Data: 0CS_ORDER_ATTR
Transaction Data:
0CS_OM_OPA_1                      Service Orders: Costs and Allocations
2LIS_18_I3HDR                     Service Orders(Header Data)
2LIS_18_I3OPER                    Service order operation(Detailed Operation Data)

Which datasource for CRM Service controlling Header Data

Dear Friends,
Could someone tell me Which data source can be used to extract data for infosources 0CRM_SERVICE_CONTROLLING_H and 0CRM_SERVICE_CONTROLLING_I (Service Controlling Header Data and Service Controlling Item Data)
Your points are assured.
Regards
Prasad.

Hi Prasad,
The infosources facilitates the dataload to the ODS 0CRM_COH and 0CRM_COI respectively.
0CRM_COI is designed for delta update AIMD (After images with deletion flag via delta queue) with the DataSource CRM Service Order Items: Actual Costs Using Delta Extraction (0CRM_SRV_C_ITEM).
0CRM_COH is designed for delta update AIMD (After images with deletion flag via delta queue) with the DataSource CRM Service Orders: Actual Costs Using Delta Extraction(0CRM_SERVICE_COSTS).
Check these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/18/f0203b8ae5630ee10000000a114084/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/34/73203b11e5bb0ee10000000a114084/content.htm
Hope this helps.
Bye
Dinesh

SSRS 2008 R2 - Dynamic header data stays the same when exporting

Background:
I have a SSRS 2008 R2 report with a single Tablix.
The data is grouped by InvoiceID, with each appearing on a separate page.
I'm displaying some of the detail data in the group header row using Expressions similar to the following:
="Invoice # " & ReportItems!InvoiceID.Value"
The data referred to by my ReportItems statements are all hidden in the detail row (Advanced Mode, the Hidden Value for the Static Row Group is set to false).
Problem:
When I Preview the report in Visual Studio, everything looks as it should - the dynamic header data changes correctly with each group.
However, whenever I export the results (I've tried all the formats), the header data is the same for every group - its taking the values from the first group and using it in all the groups.
I've copied the same expressions into my Totals row, and the data is correct when exported; its only happening in my header rows.
Any help in resolving this is greatly appreciated, thank you.

Hi Alex,
According to your description, you have a header with expression contains ReportItems. Now you find it shows incorrect result when exporting to a file. Right?
In Reporting Services, it has reported some similar issue that the ReportItem returns unexpected result when exporting. In this scenario, since you just want to show the group name in each page as a header for detail rows. So you can make the
detail rows group on the Group. Then delete the Group column but still keep the group. After that add a row above detail row (Out side of group) and put in "=Fields!InvoiceID.Value". Now it will show the corresponding Group name
when you set page break between each group instance. We have tested this case in our local environment. Here are screenshots for your reference:
Reference:
SSRS
field expressions using ReportItem refrences have unexpected results when exporting
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

How to add value in service header

Hi,
Following is the portion of service header which I am sending to my Trading Partner-
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeaderPartMessageGuideline.dtd">
<ServiceHeader>
<ProcessControl>
<ProcessIdentity>
<GlobalProcessCode></GlobalProcessCode>
<GlobalProcessIndicatorCode>3A4</GlobalProcessIndicatorCode>
<initiatingPartner>
I want to add value "Request Purchase Order" in tag "GlobalProcessCode". So this portion of service header should be like this-
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ServiceHeader SYSTEM "ServiceHeaderPartMessageGuideline.dtd">
<ServiceHeader>
<ProcessControl>
<ProcessIdentity>
<GlobalProcessCode>Request Purchase Order</GlobalProcessCode>
<GlobalProcessIndicatorCode>3A4</GlobalProcessIndicatorCode>
<initiatingPartner>
Can anyone tell that where exactly I should add "Request Purchase Order" value in my B2B configuration so that I get the required service header value?
Thanks & Regards,
Anuj Dwivedi

Hi Anuj,
Guess you are using RNIF 1.1.
Please ensure to provide the collaboration code while creating collaboration.
Regards,
Dheeraj

Repeat Header Data in Siebel BI Publisher Report

Halo All,
I'm very newbie in siebel, and i facing this problem:
I have fields named type, brand and marketing plan.
each type have many brand
each brand have many marketing plan
- the problem is the marketing plan data was loop without brand header data
like : Brand A
Plan 1
Plan 2
i want like : Brand A
Plan 1
-------page break
Brand A
Plan 2
Hope u could help me with this?
Thank you in advance
Edited by: user958190 on Mar 22, 2011 8:36 PM

I am facing a similar issue. I have defined a report with a web service as a data source. I can generate a report (pdf file) from the template in the report, both in the web interface and by calling the BI Publisher WSDL method runReportInSession. Unfortunately the report does not show any data from the data source.
I am defining the RTF templates with the latest version of the Template Builder for MS-Word (version 10.1.3.4.1 build 130), downloaded last week. My MS-Word version is MS-Word 2002 SP3 on a Windows 2003 server (32 bit). The BI Publisher Server runs on the same machine under Tomcat 6.
Two versions of the Template Builder seem to exist. The first version is contained within the BI Publisher server download and the second one is a separate download, both downloaded from the same oracle download page. The sizes of the two installation files are different, the latter file is slightly bigger. Nevertheless the help shows that they both have exactly the same version and build number !
Edited by: ruerd on Apr 27, 2010 2:56 PM

Passing Header Data in BAPI_CONTRACT_CREATE from BODS

Hi all,
I am new to BODS.
I am trying to create contract using BAPI_Contract_Create from BO-Data Services XI 3.2 to ECC 6.0.
In the New Function Call, while defining the "Input Parameters" for Header (and HeaderX), I can only select single column. Actually I should be able to pass multiple values for header data. For example fields like company code, document type, vendor etc. are mandatory entries.
Please let me know how to pass multiple values in the header data provided as varchar (10) in BODS.
Thanks,
Pradeep Kumar

Thanks for the reply.
Following are the steps that I have performed:
1) I have created tables with required contract data.
2) Then data flow is created with contract table as input to the query.
3) In the query, I have added the new function call and selected BAPI_CONTRACT_CREATE as function name.
4) I am stuck at the next screen "Define Input Parameter(s)": I don't see any individual fields like company code, doc tyep etc. I just see single field as "Header".
5) To check the field details under "Header", I used the path SAP_Repo->Functions-> BAPI_CONTRACT_CREATE. On the schema screen under Input Parameters, 'Header' has type varchar (10) whereas 'Item' is a table with various columns.
Please let me know how to pass data in 'Input Parameters' for header contract data.
Regards,
Pradeep Kumar

Idoc Receiver - Header Data does not update

Hi there
I have an Idoc receiver in a scenario where I send a Idoc from a file to the R/3 system. My config is all fine but the Idoc status in we19 shows red. My Header data for the idoc is incorrect. The idoc is WALREQ01. In my Message Mapping Im setting the SDNPOR, SDNPRT, SDNPRN, RCVPOR, RCVPRN to the correct values and the I activate the scenario but in we19 it still shows the incorrect idoc header. It does however change the idoc segment data, just not the header. Is there maybe some other place I have to set the Idoc header data?
Thanx,
Jan

Hi Jan,
From help.sap:
Apply Control Record Values from Payload
If you set the indicator, the conversion of communication parties to the IDoc partner is only possible for systems that are not logical systems.
If you do not set the indicator, all combinations of communication parties and services are handled as services without party.
If the IDoc XML structure contains a control record during outbound processing on the Integration Server, it is rejected and created again by the IDoc adapter. If you want to include additional values in the control record, set the indicator and provide an appropriate mapping for the values. See also: Fields of the IDoc Control Record
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/content.htm
Carlos

How to change order header data before SAVE in CRM 2007

Hi,
I want to modify service order header value before saving it, to achieve this :
1) Implemented BADI ORDER_SAVE
2) in the method CHECK_BEFORE_SAVE, read order details by using FM CRM_ORDER_READ and done all validations.
3) Now i want modify one field value. how to do that ?
i came to know that by using FM CRM_ORDER_MAINTAIN or CRM_ORDERADM_H_MAINTAIN_OW data can be update/modify.
Is this right ? what are the parameters i need to pass and exactly in which method i have use this FM.
I want to pass the value in CRMT_ORDERADM_H_WRK(ET_ORDERADM_H) structure i.e. only for one filed.
Please let me know how it can be done.
Thanks
Bhanu

Hi,
I am using following code, please correct if it is wrong.
DATA : IS_ORDERADM_H_COM TYPE CRMT_ORDERADM_H_COM,
           CT_ORDERADM_H TYPE CRMT_ORDERADM_H_COMT,
           IT_INPUT_FIELDS    TYPE CRMT_INPUT_FIELD_TAB,
           WA_INPUT_FIELDS    TYPE CRMT_INPUT_FIELD,
           IT_FIELD_NAMES     TYPE CRMT_INPUT_FIELD_NAMES_TAB,
           WA_FIELD_NAMES     TYPE CRMT_INPUT_FIELD_NAMES,
           IT_SERVICE_H       TYPE CRMT_SERVICE_H_COMT,
           WA_SERVICE_H       TYPE CRMT_SERVICE_H_COM.
After reading order header data from "'CRM_ORDER_READ", pass header data to below structure
    MOVE-CORRESPONDING EW_ORDERADM_H TO IS_ORDERADM_H_COM.
   IS_ORDERADM_H_COM-ZZFLD00000Y = '123456'. <== want to save value in this field created on service header screen by using AET
    APPEND IS_ORDERADM_H_COM TO CT_ORDERADM_H.
    WA_SERVICE_H-REF_KIND = 'A'.
    WA_SERVICE_H-REF_GUID = EW_ORDERADM_H-GUID.
    WA_SERVICE_H-MODE     = 'B'.
    APPEND WA_SERVICE_H TO IT_SERVICE_H.
    WA_INPUT_FIELDS-REF_GUID = EW_ORDERADM_H-GUID.
    WA_INPUT_FIELDS-REF_KIND    = 'A'.
    WA_INPUT_FIELDS-OBJECTNAME = 'ORDERADM_H'. <= Is this right ?
   WA_INPUT_FIELDS-LOGICAL_KEY = ? what is nothing but logical key
    WA_FIELD_NAMES-FIELDNAME = 'ZZFLD00000Y'.
    WA_FIELD_NAMES-CHANGEABLE = 'X'.
    APPEND WA_FIELD_NAMES TO IT_FIELD_NAMES.
    WA_INPUT_FIELDS-FIELD_NAMES = IT_FIELD_NAMES.
    APPEND WA_INPUT_FIELDS TO IT_INPUT_FIELDS.
CALL FUNCTION 'CRM_ORDER_MAINTAIN'
    EXPORTING
   IT_SERVICE_H                  = IT_SERVICE_H <= is this required ?
    CHANGING
       CT_ORDERADM_H              = CT_ORDERADM_H
      CT_INPUT_FIELDS                = IT_FIELD_NAMES
     EXCEPTIONS
       ERROR_OCCURRED                = 1
       DOCUMENT_LOCKED               = 2
       NO_CHANGE_ALLOWED             = 3
       NO_AUTHORITY                  = 4
       OTHERS                        = 5.
    IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
awaiting for your replies
Thanks
Bhanu
Edited by: Bhanupracash on Apr 6, 2011 2:14 PM

Relation Between Service Rendered date and Pricing

Hi All,
I have a sale order for both sevice item and product.and it is order related billing.I have already billed the service line item.Now when i change the service rendered date in the sale order header,the net price for that service item becomes zero.
Can any one pl help me out in this.

Hi
The service rendered date is the date the system uses to calculate the price for the item.
if u change the date subsequently , if the price is zero , you may check the codnition records validty end
if the validity of the condition record has expired
thanks
akasha

Infopath 2013/REST Web Service - XML Data format

I've created an Infopath 2013 form and connected it to an existing REST Web Service. The form connects successfully, but I can't get to the nodes that contain the actual data. The REST results look like this:
<wddxPacket version='1.0'>
<header/>
<data>
<struct>
<var name='MIDDLENAME'><string>S</string></var>
<var name='FIRSTNAME'><string>John</string></var>
<var name='UID'><string>jdoe</string></var>
<var name='EMAIL'><string>[email protected]</string></var>
<var name='DEPARTMENT'><string>IT ADMINISTRATION</string></var>
<var name='TITLE'><string>Director</string></var>
<var name='LASTNAME'><string>Doe</string></var>
</struct>
</data>
</wddxPacket>
When I connect to the web service in InfoPath, here is what I see:
Notice that when we expand the tree, it only shows the "struct" node. How do I get down to the actual data fields?
Thanks in advance.
cflbasser

Hi cflbasser ,
According to your description, my understanding is that you want to query data using rest web service in InfoPath 2013.
For achieving your demand, please refer to the blog:
http://johnliu.net/blog/2012/4/26/infopath-2010-query-using-the-rest-interface.html
http://sharepointlessons.blogspot.com/2013/09/infopath-and-sharepoint-web-services.html
Best Regards,
Eric
Eric Tao
TechNet Community Support

Configure Service Rendered Date to be equal to Billing Date

Hi Gurus,
Is there a way in the config to make the Service Rendered Date equal to the Biling Date in the Sales Order Header?
Thanks and regards,
JayGutz

I dont think there is anything in configuration to set the service rendered date. You only have to use an user exit.
Without any customisation, the system will take the pricing date as Service rendered date.
You can try USEREXIT_MOVE_FIELD_TO_VBAK to move the billing date field also to VBAK-FBUDA.

RNIF Service Header data

Similar Messages

Maybe you are looking for