Road Permit at the time of GR
Hello All,
I want to know,whether in std SAP "the details of Road Permit can be given at the time of GR"..?
Plz revert me back..
Give it as a cdn type in PO , so that u can post the road permit at time of GR.
regards
Similar Messages
-
Is it possible to change the read/write permissions on a time machine back-up of iTunes? I'm needing to restore it as my phone deleted half our playlists during sync & am not seeing a way to unlock the permissions. I have the current version unlocked, but can't seem to get the backed-up version. When I click on restore I get a pop-up that says iTunes can't be deleted as it is part of the OS. I'm not even trying to delete, just restore the old version. Any suggestions?
Hmmm, ok I'll give it a shot. I've always had the iTunes sync w/ my phone set up to only load selected playlists to the phone b/c there's a lot more in iTunes than I have room or desire for on my phone. A few months back I started having trouble w/ trying to sync everything & subsequently adding more to the phone than it could hold. The quickest thing at the time was to unclick the sync music option in iTunes so I could still backup the phone to the computer & not have a problem.
When I asked about it during one-to-one session shortly after, they advised me to delete the music off my phone & then re-sync it to the computer, run a backup of the phone & redownload the music to the phone. When I tried this it ended up deleting all my playlists (but not my husband's) from iTunes. Irritating, but I've been rebuilding the playlists since. I had also unclicked sync music again & an Apple person told me the most likely best fix was to delete & reload iTunes completely.
A few days ago I realized I hadn't backed up the phone to the computer in over a month so after deleting & reinstalling iTunes, & w/o changing anything (sync music was STILL unchecked) I ran a backup & my phone went from having 4 GB free space to being 2 GB over capacity due to iTunes trying to download the entire music library to the phone. I made a one-to-one appt again & it was suggested AGAIN that I delete all the music off my phone & then resync it to the computer & redownload the music. We did this (though a few random songs that had previously been purchased somehow remained on the phone), I got home, connected the phone & instead of the music that shows as 'on my device' disappearing from iTunes it just sat there, so, as the guy had told me I MIGHT have to do, I threw all those songs showing in iTunes as being on my phone, in the trash so that it was completely clear.
At this point I checked sync music, made sure the options were 'selected playlists only', checked the ones from my own list that I wanted (I usually have one playlist of comedians from my husband's folder that I also have on the phone, but didn't check it at this point). It uploaded all my stuff just fine, but for whatever reason when it saw that I wasn't uploading that comedy playlist any longer, it not only didn't upload it but proceeded to delete my husband's entire folder of playlists from iTunes. -_- I got on the phone w/ an Apple support person right away but he wasn't able to tell me anything .. basically said we'll have to rebuild everything. I asked about the possibility of using time machine, he said he's not qualified to answer that, so that's when I started looking around online & found, among others, the link I referenced a couple replies ago.
I hope this all makes sense. It's been a long-term issue so I'm trying to go from memory as I figured to begin w/ that I had just made a mistake somewhere, so didn't try to document anything. Now w/ it having happened a 2nd time, I'm not sure if it was 'user error' or something else....... -
Recently had to restore system 10.5.8 Leopard startup volume using Time machine. After many hours of migrating additional important databases that were recovered from failing startup drive, everything seemed to be back up and running smoothly on a new WD 1tb Black drive. Right before I run timemachine again to backup the new revised seemingly stable startup volume, I choose to repair disk permissions using disk utility. Repair permissions failed with this error, The underlying task reported faliure on exit. I tried using the OS X DVD to repair permissions, Diskwarrior, Onyx, none are able to reapair the disk permissions. Although everything seems perfect I would imagine that the system will fail eventually. It's strange that I had no problems repairing disk permissions in the past on this particular system that was the most recent backup. What should I do ?
Repair permissions always reports a bunch of stuff. Ignore it if it says it completed successfully.
Also note that is it usually a waste of time (except maybe after a system upgrade). -
Hi,
After I Repair The Permissions On My Mac Pro, Then I Verify The Permissions And They Have To Be Repaired Again And Again.
Why Does This Happen All The Time.
Please Reply,
JamesAs long as the report ends up with 'Permissions repair complete' then, as far as permissions go, you are fine. You can ignore the various statements in the report:
Permissions you can ignore on 10.5 onwards:
http://support.apple.com/kb/TS1448
Using 'should be -rw-r--r-- , they are lrw-r--r--' as an example, you will see the that the permissions are not changed, but the | indicates a different location. This is because an update to Leopard onwards changed the location of a number of system components.
Poster rccharles has provided this description of what it all means:
drwxrwxrwx
d = directory
r = read
w = write
x = executeable program
drwxrwxrwx
| | |
| | all other users not in first two types
| |
| group
|
owner -
Does the Adobe Reader installer modify folder permissions at install time?
From the behavior I have observed, it does; however I would like to confirm this with someone. If so, is there a specific reason this is being done and what proccess is being used, for example does the installer remove all permissions from the folder then add permissions or does it remove only the users that are not needed then add new ones? Also there are two custom actions in the MSI that I am curious about, LockFilePermissions and LockRegPermissions. It appears these are the actions that are removing the default permissions. Can anyone provide any insight as to why this is needed?
Anyone?
-
How do I copy the Time Machine backup folder to another folder? (Mac 10.7.5)
Short version: I like to make an initial backup of my Mac OS before I start installing stuff...just in case I need to get back to square one down the road. I travel as a freelancer for work, so every couple of months, I'm on a new rented system. But I need to move that initial backup folder to a sub-folder so that I can continue to run TM without ever deleting anything from that initial backup. When I go to move or copy it to another folder or drive, it tells me I don't have permission. How do I get permission to move it?
I've tried changing the permissions on the folder itself... It won't let me select any other users, and admins are not on the "write" list. No dice.
Any ideas?
I'm on a Mac Pro 8-core
MacPro3,1
OS 10.7.5
Thanks!Yeah, sorry...but there doesn't seem to be a "Time Machine" forum anywhere, this was the closest I could find. I could have posted in OS 10.7 forum...but I was worried the traffic would be much lighter there. If I should move my question there, I will.
Ok, so my Time Machine has backed up to my external drive which I have split into two separate partitions. I do not have automatic backups on. I just ran it once to get the "footprint" before I start to alter things to my needs. I'd like to compress and put away the backup on that first partition as sort of a general "back to square one" backup. I chose to use Time Machine because I can literally restore it back to all the original settings, etc. This is just a fire plan, but I really want to lock it off.
Then, I want to set my second partition on that same drive as my incremental Time Machine backup. That way, once I run out of space and it begins deleting the old stuff (and I will run out of space...I export several hundred gigs of video files per day), I can always retain that initial backup.
The problem is, when I go to move that backup....AFTER I've pointed Time Machine to the new partition...or any other drive for that matter... It tells me that either the folder doesn't have "ownership rights" or it simply "cannot do that." (I'll snag you a screen grab next time I'm by it if you want.)
So, how do I get it to move where I want it so that I can make a new one? -
LOTS of spinning wheels in Mountain Lion--multiple applications, ALL the time
Sep 6, 2012 1:55 AM (in response to teacher24_70)
Having the exact same issue. Also, on right click, many apps freeze/beachball and must force close. Additionally, uTorrent and Transmission are not operating correctly-uTorrent constantly beachballing and unresponsive. Right-click freezes with everything from Word to iMovie. Takes way too much time to do anything, and lots of cursor freezing, here is a sys log excerpt:
Sep 6 01:20:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer pluginFactory for factory 053918F4-2869-11D7-A671-000A27E2DB90 in CFBundle/CFPlugIn 0x808d2800 </Users/happymatt/Library/Contextual Menu Items/ToastIt.plugin> (not loaded)
Sep 6 01:20:43 Matthews-MacBook-Pro-4.local Google Chrome[271]: Cannot find function pointer AntiCMPlugInFactory for factory E7083DE8-B37D-11D9-9B46-000D935563B0 in CFBundle/CFPlugIn 0x808d05b0 </Library/Contextual Menu Items/Antidote - MC.plugin> (not loaded)
Sep 6 01:20:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:20:54 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:20:59 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 6.13 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:21:02 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:32 --- last message repeated 2 times ---
Sep 6 01:21:32 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:40 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:21:42 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:21:47 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.50 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:21:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:23 --- last message repeated 2 times ---
Sep 6 01:22:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:29 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:22:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:22:37 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.81 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:22:43 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:13 --- last message repeated 2 times ---
Sep 6 01:23:13 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:19 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:23:22 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 3.61 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:23:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:53 --- last message repeated 2 times ---
Sep 6 01:23:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:23:56 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:24:02 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.20 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:24:03 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:24:24 --- last message repeated 2 times ---
Sep 6 01:24:24 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:24:27 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "Safari" after 4.25 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:24:33 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:24:59 --- last message repeated 2 times ---
Sep 6 01:24:59 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:25:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:25:07 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.59 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:25:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:25:44 --- last message repeated 2 times ---
Sep 6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:25:44 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 1.24 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:25:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:26:14 --- last message repeated 2 times ---
Sep 6 01:26:14 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:26:36 --- last message repeated 2 times ---
Sep 6 01:26:36 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:26:42 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:26:44 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:27:06 --- last message repeated 2 times ---
Sep 6 01:27:06 Matthews-MacBook-Pro-4.local purge[1528]: <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
Sep 6 01:27:20 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:27:21 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 4 seconds
Sep 6 01:27:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 5.71 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:27:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:27:53 --- last message repeated 2 times ---
Sep 6 01:27:53 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:27:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:00 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 7.22 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:28:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:25 --- last message repeated 1 time ---
Sep 6 01:28:25 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:28:25 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:28:33 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 8.65 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:28:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:05 --- last message repeated 2 times ---
Sep 6 01:29:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:08 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:29:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:22 Matthews-MacBook-Pro-4.local WindowServer[86]: disable_update_likely_unbalanced: UI updates still disabled by application "µTorrent" after 15.00 seconds (server forcibly re-enabled them after 1.00 seconds). Likely an unbalanced disableUpdate call.
Sep 6 01:29:24 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 17.09 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:29:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:29:56 --- last message repeated 2 times ---
Sep 6 01:29:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:03 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDisableUpdate: UI updates were forcibly disabled by application "µTorrent" for over 1.00 seconds. Server has re-enabled them.
Sep 6 01:30:06 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:12 Matthews-MacBook-Pro-4.local WindowServer[86]: reenable_update_for_connection: UI updates were finally reenabled by application "µTorrent" after 9.74 seconds (server forcibly re-enabled them after 1.00 seconds)
Sep 6 01:30:16 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:26 --- last message repeated 1 time ---
Sep 6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x59059].com.apple.DiskUtility[769]): Exited: Killed: 9
Sep 6 01:30:26 Matthews-MacBook-Pro-4 com.apple.launchd.peruser.501[179] ([0x0-0x1d01d].com.bittorrent.uTorrent[281]): Exited: Killed: 9
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXDeferSurfaces : Invalid source window 231
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] Received XPC_ERROR_CONNECTION_INVALID
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit-XPC] connectionWithClientInterrupted
Sep 6 01:30:33 Matthews-MacBook-Pro-4.local com.apple.ShareKitHelper[1266]: --warning: [ShareKit] Cancel UI for running services with Client PID: 1235
Sep 6 01:30:36 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:43 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Sep 6 01:30:44 Matthews-MacBook-Pro-4.local launchctl[1590]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 6 01:30:45 Matthews-MacBook-Pro-4.local CVMServer[103]: Check-in to the service com.apple.cvmsCompAgent_x86_64 failed. This is likely because you have either unloaded the job or the MachService has the ResetAtClose attribute specified in the launchd.plist. If present, this attribute should be removed.
Sep 6 01:30:46 Matthews-MacBook-Pro-4 kernel[0]: Sandbox: sandboxd(1596) deny mach-lookup com.apple.coresymbolicationd
Sep 6 01:30:46 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:30:47 Matthews-MacBook-Pro-4.local com.apple.quicklook.satellite[1591]: CFBundle 0x7f8ac3c87370 </Library/Audio/Plug-Ins/Components/Flip4Mac WMA Import.component> (bundle, not loaded): bundle is not loadable: The bundle “Flip4Mac WMV Import” couldn’t be loaded because it is damaged or missing necessary resources.
Sep 6 01:30:56 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:31:26 --- last message repeated 2 times ---
Sep 6 01:31:26 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:31:57 --- last message repeated 2 times ---
Sep 6 01:31:57 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:32:12 --- last message repeated 1 time ---
Sep 6 01:32:12 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.apple.coremedia.videodecoder[1602]): Exit timeout elapsed (20 seconds). Killing
Sep 6 01:32:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:32:47 --- last message repeated 2 times ---
Sep 6 01:32:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:33:17 --- last message repeated 2 times ---
Sep 6 01:33:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:33:47 --- last message repeated 2 times ---
Sep 6 01:33:47 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:34:17 --- last message repeated 2 times ---
Sep 6 01:34:17 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:34:48 --- last message repeated 2 times ---
Sep 6 01:34:48 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:14 --- last message repeated 2 times ---
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [5057D5F949924084807D7C8DDB02E833]
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Incorrect password, failed to verify key [EF0ED6A834EA4FE8AE6CE569E06DEBDA]
Sep 6 01:35:14 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Not enough encryption keys found in [file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1Password%202.agi lekeychain/data/default/1password.keys]: 0. The master password entered incorrectly.
Sep 6 01:35:15 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:19 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Failed to return databaseID, encryption key is not loaded
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:26 Matthews-MacBook-Pro-4.local Safari[1472]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:35:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:33 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6e3050a0 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e3116f0 [0x7fff7579c190]>{type = immutable dict, count = 10,
entries =>
0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e311770 [0x7fff7579c190]>{contents = "nosniff"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e311740 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Server = <CFString 0x7fdf6e319f70 [0x7fff7579c190]>{contents = "GSE"}
3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
6 : Case Insensitive Key: Date = <CFString 0x7fdf6e317fe0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e318070 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e319f50 [0x7fff7579c190]>{contents = "1; mode=block"}
9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e31d190 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e318040 [0x7fff7579c190]>{contents = "private, max-age=0"}
12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e318010 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:34:55 GMT"}
Sep 6 01:35:38 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:35:54 --- last message repeated 1 time ---
Sep 6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:35:54 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.016+0.000 (294 objects)
Sep 6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:35:56 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.019+0.000 (294 objects)
Sep 6 01:35:58 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:18 --- last message repeated 1 time ---
Sep 6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: reloadAllObjects
Sep 6 01:36:18 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:18 Matthews-MacBook-Pro-4.local 1PasswordAgent[241]: Database (AGHtmlDatabase:file://localhost/Users/happymatt/Desktop/SECURITY:ENCRYPTION/1P assword%202.agilekeychain/) load time [Cache]: 0.015+0.000 (294 objects)
Sep 6 01:36:28 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:36:59 --- last message repeated 2 times ---
Sep 6 01:36:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:37:29 --- last message repeated 2 times ---
Sep 6 01:37:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:37:59 --- last message repeated 2 times ---
Sep 6 01:37:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:38:29 --- last message repeated 2 times ---
Sep 6 01:38:29 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:38:59 --- last message repeated 2 times ---
Sep 6 01:38:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:39:30 --- last message repeated 2 times ---
Sep 6 01:39:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:00 --- last message repeated 2 times ---
Sep 6 01:40:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:30 --- last message repeated 2 times ---
Sep 6 01:40:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:48 --- last message repeated 1 time ---
Sep 6 01:40:48 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1771[GoogleSoftwareUp] clearing CS_VALID
Sep 6 01:40:50 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x253390
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x253740 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:06
>
Using server: <KSOmahaServer:0x2583a0
engine=<KSDaemonUpdateEngine:0x2044530>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 08:40:51 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 07:42:15 +0000;
"com.google.GoogleDrive" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-08-31 00:45:54 +0000;
LastActivePingDate = 2012-08-31 07:00:30 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-08-22 07:00:12 +0000;
LastActiveDate = 2012-08-22 02:55:20 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.1_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x259c40
server=<KSOmahaServer:0x2583a0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=1
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
Sep 6 01:40:51 Matthews-MacBook-Pro-4.local launchctl[1776]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x45437b0
server=<KSOmahaServer:0x2583a0>
url="https://tools.google.com/service/update2"
status=200
tickets=1
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="6017"></daystart>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine updateAllProducts] KSUpdateEngine updating all installed products.
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSCheckAction performAction] KSCheckAction checking 2 ticket(s).
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(
<KSTicket:0x2643870
productID=com.google.talkplugin
version=3.5.1.8982
xc=<KSPathExistenceChecker:0x2643740 path=/Library/Application Support/Google/GoogleTalkPlugin.app>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:07
>,
<KSTicket:0x2643480
productID=com.google.Keystone
version=1.1.0.3659
xc=<KSPathExistenceChecker:0x2642ec0 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>
serverType=Omaha
url=https://tools.google.com/service/update2
creationDate=2012-08-18 11:28:06
>
Using server: <KSOmahaServer:0x204c0e0
engine=<KSDaemonUpdateEngine:0x2044530>
params={
EngineVersion = "1.1.0.3659";
ActivesInfo = {
"com.google.Keystone" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 08:40:51 +0000;
"com.google.Chrome" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-09-06 07:42:15 +0000;
"com.google.GoogleDrive" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActiveDate = 2012-08-31 00:45:54 +0000;
LastActivePingDate = 2012-08-31 07:00:30 +0000;
"com.google.talkplugin" = {
LastRollCallPingDate = 2012-09-06 07:00:38 +0000;
LastActivePingDate = 2012-08-22 07:00:12 +0000;
LastActiveDate = 2012-08-22 02:55:20 +0000;
UserInitiated = 0;
IsSystem = 1;
OmahaOSVersion = "10.8.1_i486";
Identity = KeystoneDaemon;
AllowedSubdomains = (
".omaha.sandbox.google.com",
".tools.google.com",
".www.google.com",
".corp.google.com"
>
Sep 6 01:40:54 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x2047910
server=<KSOmahaServer:0x204c0e0>
url="https://tools.google.com/service/update2"
runningFetchers=0
tickets=2
activeTickets=0
rollCallTickets=0
body=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">
<o:os platform="mac" version="MacOSX" sp="10.8.1_i486"></o:os>
<o:app appid="com.google.talkplugin" version="3.5.1.8982" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
<o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="18" brand="GGLG">
<o:updatecheck></o:updatecheck>
</o:app>
</o:gupdate>
>
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(KSServerUpdateRequestDelegate) serverRequest:fetchedWithResponse:] KSUpdateCheckAction received KSServerUpdateResponse: <KSOmahaServerUpdateResponse:0x257570
server=<KSOmahaServer:0x204c0e0>
url="https://tools.google.com/service/update2"
status=200
tickets=2
activeTickets=0
rollCallTickets=0
data=
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<gupdate xmlns="http://www.google.com/update2/response" protocol="2.0" server="prod">
<daystart elapsed_seconds="6018"></daystart>
<app appid="com.google.talkplugin" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
<app appid="com.google.Keystone" status="ok">
<updatecheck status="noupdate"></updatecheck>
</app>
</gupdate>
>
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Sep 6 01:40:56 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Sep 6 01:40:59 Matthews-MacBook-Pro-4.local KernelEventAgent[57]: tid 00000000 received event(s) VQ_LOWDISK, VQ_VERYLOWDISK (516)
Sep 6 01:40:59 Matthews-MacBook-Pro-4 kernel[0]: HFS: Vol: Google Chrome 21.0.1180.82-21.0.1180.89 Update Very Low Disk: freeblks: 0, dangerlimit: 12
Sep 6 01:40:59 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 1 seconds
Sep 6 01:41:00 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1804[ksadmin] clearing CS_VALID
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1807[ksadmin] clearing CS_VALID
Sep 6 01:41:01 Matthews-MacBook-Pro-4 kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=1809[ksadmin] clearing CS_VALID
Sep 6 01:41:02 Matthews-MacBook-Pro-4.local defaults[1813]:
The domain/default pair of (/Applications/Google Chrome.app/Contents/Info, KSBrandID) does not exist
Sep 6 01:41:10 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:11 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:
com.google.Keystone.Daemon.UpdateEngine: 1 connection(s)
com.google.Keystone.Daemon.Administration: 0 connection(s)
Sep 6 01:41:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:41:21 Matthews-MacBook-Pro-4.local GoogleSoftwareUpdateDaemon[1773]: -[KeystoneDaemon main] GoogleSoftwareUpdateDaemon inactive, shutdown.
Sep 6 01:41:30 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:01 --- last message repeated 2 times ---
Sep 6 01:42:01 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:05 Matthews-MacBook-Pro-4.local purge[2045]: <CPPathUtils.c:526> The device-file for this operating system, 'osx-12.1.0.xml', was not found. An attempt to revert to a previous revision of the OS device-file: 'osx-12.0.0.xml' has been made. Please file a Radar report with Apple, on the 'CoreProfile' component, version 'X'.
Sep 6 01:42:20 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 2 seconds
Sep 6 01:42:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:42:52 --- last message repeated 2 times ---
Sep 6 01:42:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:43:22 --- last message repeated 2 times ---
Sep 6 01:43:22 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:43:52 --- last message repeated 2 times ---
Sep 6 01:43:52 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:44:23 --- last message repeated 2 times ---
Sep 6 01:44:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:44:53 --- last message repeated 2 times ---
Sep 6 01:44:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:45:23 --- last message repeated 2 times ---
Sep 6 01:45:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:45:53 --- last message repeated 2 times ---
Sep 6 01:45:53 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:46:23 --- last message repeated 2 times ---
Sep 6 01:46:23 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:46:54 --- last message repeated 2 times ---
Sep 6 01:46:54 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage dissolveToPoint:fromRect:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:00 Matthews-MacBook-Pro-4.local WebProcess[1474]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:47:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:47:34 --- last message repeated 2 times ---
Sep 6 01:47:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:48:04 --- last message repeated 2 times ---
Sep 6 01:48:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:48:34 --- last message repeated 2 times ---
Sep 6 01:48:34 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:04 --- last message repeated 2 times ---
Sep 6 01:49:04 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:30 --- last message repeated 2 times ---
Sep 6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: Unable to open IOHIDSystem (e00002bd)
Sep 6 01:49:30 Matthews-MacBook-Pro-4 kernel[0]: virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
Sep 6 01:49:30 Matthews-MacBook-Pro-4.local Dock[197]: CGSSetWindowTransformAtPlacement: Singular matrix [inf 0.000 0.000 inf]
Sep 6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Cannot find originating application to launch for event action. file://localhost/Applications/Postbox.app/ is not the same app as the one that sent the original notification.
Sep 6 01:49:31 Matthews-MacBook-Pro-4.local usernoted[220]: Error finding application com.postbox-inc.postbox.
Sep 6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:49:34 Matthews-MacBook-Pro-4.local DashboardClient[2154]: *** WARNING: -[NSImage compositeToPoint:fromRect:operation:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
Sep 6 01:49:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:49:46 --- last message repeated 1 time ---
Sep 6 01:49:46 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: Unsure about the internals of CFAllocator but going to patch them anyway. If there is a crash inside of CFAllocatorAllocate, please report it at http://crbug.com/117476 . If there is a crash and it is NOT inside of CFAllocatorAllocate, it is NOT RELATED. DO NOT REPORT IT THERE but rather FILE A NEW BUG.
Sep 6 01:49:48 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x17 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:49:49 Matthews-MacBook-Pro-4.local Google Chrome Helper[2162]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1100)
Sep 6 01:49:55 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:50:10 --- last message repeated 1 time ---
Sep 6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x13 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:50:10 Matthews-MacBook-Pro-4.local WindowServer[86]: CGXSetWindowListTags: Modification of (unknown tag) (45) on a window 0x15 requiring rights kCGSWindowRightOwner by caller Dashboard
Sep 6 01:50:15 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:50:32 --- last message repeated 1 time ---
Sep 6 01:50:32 Matthews-MacBook-Pro-4.local CalendarAgent[997]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fdf6981ad60 {AccountName=Google, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fdf6e807840 [0x7fff7579c190]>{type = immutable dict, count = 10,
entries =>
0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fdf6e806420 [0x7fff7579c190]>{contents = "nosniff"}
1 : Case Insensitive Key: Content-Type = <CFString 0x7fdf6e807780 [0x7fff7579c190]>{contents = "text/html; charset=UTF-8"}
2 : Case Insensitive Key: Server = <CFString 0x7fdf6e801460 [0x7fff7579c190]>{contents = "GSE"}
3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff74a546b8 [0x7fff7579c190]>{contents = "Identity"}
6 : Case Insensitive Key: Date = <CFString 0x7fdf6e8077b0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fdf6e801320 [0x7fff7579c190]>{contents = "SAMEORIGIN"}
8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fdf6e801440 [0x7fff7579c190]>{contents = "1; mode=block"}
9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fdf6e807750 [0x7fff7579c190]>{contents = "BASIC realm="Google CalDAV""}
11 : Case Insensitive Key: Cache-Control = <CFString 0x7fdf6e807810 [0x7fff7579c190]>{contents = "private, max-age=0"}
12 : Case Insensitive Key: Expires = <CFString 0x7fdf6e8077e0 [0x7fff7579c190]>{contents = "Thu, 06 Sep 2012 08:49:54 GMT"}
Sep 6 01:50:35 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Sep 6 01:51:05 --- last message repeated 2 times ---
Sep 6 01:51:05 Matthews-MacBook-Pro-4 com.apple.launchd[1] (com.daz3d.content_management_service): Throttling respawn: Will start in 10 seconds
Below is the EtreSoft Analysis:
Hardware Information:
MacBook Pro - model: MacBookPro8,3
1 2.4 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Startup Items:
Cocktail - Path: /Library/StartupItems/Cocktail
EyeConnect - Path: /Library/StartupItems/EyeConnect
System Software:
OS X 10.8.1 (12B19) - Uptime: 0 days 0:50
Disk Information:
TOSHIBA MK7559GSXF disk0 : (750.16 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
disk0s2 (disk0s2) <not mounted>: 749.16 GB
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
PNY Technologies USB 2.0 FD 32.08 GB
disk2s1 (disk2s1) <not mounted>: 209.7 MBI'm having the same issue - started a few months ago and had to forcibly shut down the Mac. That killed the hard drive, so I got a new hard drive and had the Apple Store install Lion on it, then used Migration Assistant to bring files over. Since then I've upgraded to Mountain Lion and have been experiencing lots of beach balls, freezes, etc. They're so bad that I've had to forcibly shut down 3 times, and each time can't restart. Each time I've erased and done a clean install of Mountain Lion from a USB, then used migration assistant and time machine to bring files back. Just did this last night and am still getting tons of beach balls and freezes. Help please! Here's what Etresoft says.
Hardware Information:
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2 cores
4 GB RAM
Video Information:
Intel HD Graphics 3000 - VRAM: 384 MB
Startup Items:
CiscoVPN - Path: /System/Library/StartupItems/CiscoVPN
Parallels - Path: /Library/StartupItems/Parallels
System Software:
OS X 10.8.3 (12D78) - Uptime: 0 days 1:25
Disk Information:
WDC WD5000BPVT-00HXZT3 disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
V (disk0s2) /: 499.25 GB (294.67 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-8A8
USB Information:
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
[failed] com.apple.accountsd.plist
[failed] com.apple.mrt.uiagent.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.backblaze.bzserv.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.google.keystone.agent.plist
[loaded] com.puredigitaltechnologies.FlipShare.AutoRun.plist
[loaded] jp.co.canon.CUPSCMFP.BG.plist
[failed] jp.co.canon.CUPSPS2.BG.plist
[loaded] jp.co.canon.UFR2.BG.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[failed] com.apple.CSConfigDotMacCert-paul.graham...plist
[loaded] com.backblaze.bzbmenu.plist
[failed] com.facebook.videochat.paulburke.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Microsoft Database Daemon
iTunesHelper
Dropbox
3rd Party Preference Panes:
Backblaze Backup
Flash Player
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flip4Mac WMV Plugin.plugin
DivXBrowserPlugin.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
iPhotoPhotocast.plugin
JavaAppletPlugin.plugin
npg.plugin
npgtpo3dautoplugin.plugin
o1dbrowserplugin.plugin
OfficeLiveBrowserPlugin.plugin
QuickTime Plugin.plugin
RealPlayer Plugin.plugin
SharePointBrowserPlugin.plugin
Silverlight.plugin
User Internet Plug-ins:
WebEx64.plugin
Bad Fonts:
None
Top Processes by CPU:
27% mds
3% WindowServer
2% EtreCheck
2% Skype
2% hidd
1% bztransmit
1% fontd
1% WebProcess
0% Console
0% mtmfs
Top Processes by Memory:
496 MB Mail
283 MB WebProcess
229 MB bztransmit
202 MB mds
164 MB Safari
139 MB Skype
66 MB SyncServicesAgent
57 MB WindowServer
53 MB Finder
41 MB PluginProcess -
The time actually ran up to 27hours remaining before I force quit it (it was installing for at least an hour already) I have tried this on iMacs running various versions of OSX including Maverick and Yosemite and they both have this issue. This is CC for Enterprise. The package included Photoshop, Bridge, Illustrator, InDesign, Muse, and After Effects. Here is the installer log:
Nov 24 15:24:09 Henrys-iMac Installer[384]: @(#)PROGRAM:Install PROJECT:Install-690
Nov 24 15:24:09 Henrys-iMac Installer[384]: @(#)PROGRAM:Installer PROJECT:Installer-538
Nov 24 15:24:09 Henrys-iMac Installer[384]: Hardware: iMac12,2 @ 2.70 GHz (x 4), 8192 MB RAM
Nov 24 15:24:09 Henrys-iMac Installer[384]: Running OS Build: Mac OS X 10.7.5 (11G63)
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: PATH=/usr/bin:/bin:/usr/sbin:/sbin
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: TMPDIR=/var/folders/_d/c6_827z92njfbx5jpb7hzsyh0000gn/T/
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: SHELL=/bin/bash
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: HOME=/Users/henryfrick
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: USER=henryfrick
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: LOGNAME=henryfrick
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: DISPLAY=/tmp/launch-AhtzCs/org.x:0
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: SSH_AUTH_SOCK=/tmp/launch-qGnbkA/Listeners
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: Apple_Ubiquity_Message=/tmp/launch-XxdyXy/Apple_Ubiquity_Message
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: Apple_PubSub_Socket_Render=/tmp/launch-dEGRJ6/Render
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: COMMAND_MODE=unix2003
Nov 24 15:24:09 Henrys-iMac Installer[384]: Env: __CF_USER_TEXT_ENCODING=0x1F5:0:0
Nov 24 15:24:09 Henrys-iMac Installer[384]: CCPLuciano Installation Log
Nov 24 15:24:09 Henrys-iMac Installer[384]: Opened from: /Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg
Nov 24 15:24:09 Henrys-iMac Installer[384]: Luciano Installation Log
Nov 24 15:24:09 Henrys-iMac Installer[384]: Opened from: /Volumes/GHOSTDRIVE2/Luciano/Build/Luciano_Install.pkg
Nov 24 15:24:09 Henrys-iMac Installer[384]: fileURLForURL = x-disc://GHOSTDRIVE2/Luciano/Build/Luciano_Install.pkg
Nov 24 15:24:09 Henrys-iMac Installer[384]: fileURLForURL = file://localhost/Volumes/GHOSTDRIVE2/Luciano/Build/Luciano_Install.pkg
Nov 24 15:24:14 Henrys-iMac Installer[384]: InstallerStatusNotifications plugin loaded
Nov 24 15:24:21 Henrys-iMac runner[403]: Administrator authorization granted.
Nov 24 15:24:21 Henrys-iMac Installer[384]: ================================================================================
Nov 24 15:24:21 Henrys-iMac Installer[384]: User picked Standard Install
Nov 24 15:24:21 Henrys-iMac Installer[384]: Choices selected for installation:
Nov 24 15:24:21 Henrys-iMac Installer[384]: Upgrade: "CCPLuciano"
Nov 24 15:24:21 Henrys-iMac Installer[384]: CCPLuciano_Install.pkg : com.adobe.Enterprise.install.F71180A0-A393-42DF-9B13-156B44D066BA : 1.0.0.1.0
Nov 24 15:24:21 Henrys-iMac Installer[384]: ================================================================================
Nov 24 15:24:21 Henrys-iMac Installer[384]: It took 0.00 seconds to summarize the package selections.
Nov 24 15:24:21 Henrys-iMac Installer[384]: -[IFPKGDerivedDocument sortedPackageLocations]: result = (
"file://localhost"
Nov 24 15:24:21 Henrys-iMac Installer[384]: -[IFDInstallController(Private) _buildInstallPlan]: location = file://localhost
Nov 24 15:24:21 Henrys-iMac Installer[384]: -[IFDInstallController(Private) _buildInstallPlan]: file://localhost/Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg
Nov 24 15:24:21 Henrys-iMac Installer[384]: Set authorization level to root for session
Nov 24 15:24:21 Henrys-iMac Installer[384]: Will use PK session
Nov 24 15:24:21 Henrys-iMac Installer[384]: Starting installation:
Nov 24 15:24:21 Henrys-iMac Installer[384]: Configuring volume "Macintosh HD"
Nov 24 15:24:21 Henrys-iMac Installer[384]: Preparing disk for local booted install.
Nov 24 15:24:21 Henrys-iMac Installer[384]: Free space on "Macintosh HD": 729.28 GB (729277222912 bytes).
Nov 24 15:24:21 Henrys-iMac Installer[384]: Create temporary directory "/var/folders/_d/c6_827z92njfbx5jpb7hzsyh0000gn/T//Install.384aB0g1m"
Nov 24 15:24:21 Henrys-iMac Installer[384]: IFPKInstallElement (1 packages)
Nov 24 15:24:21 Henrys-iMac Installer[384]: Using authorization level of root for IFPKInstallElement
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: ----- Begin install -----
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: packages=(
"PKJaguarPackage <file://localhost/Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg>"
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: Will do receipt-based obsoleting for package identifier com.adobe.Enterprise.install.F71180A0-A393-42DF-9B13-156B44D066BA (prefix path=)
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: Extracting file://localhost/Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
Nov 24 15:24:22 Henrys-iMac installd[406]: PackageKit: Executing script "./preupgrade" in /Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg/Contents/Resources
Nov 24 15:24:22 Henrys-iMac installd[406]: ./preupgrade: AAMEE Installer : preupgrade launched...
Nov 24 15:24:22 Henrys-iMac installd[406]: ./preupgrade: AAMEE Installer : Working directory is /Users/henryfrick/Desktop/CCPLuciano/Build/CCPLuciano_Install.pkg/Contents/Resources
Nov 24 15:24:22 Henrys-iMac installd[406]: ./preupgrade: AAMEE Installer : Launching AdobeDeploymentManager...Set the permissions for Everyone in the folder in which CCPackager created, to "Read/Write" enabled. This is strange since there is only an administrator account on the Mac (and that account already has read/write), but it seems to resolve the issue.
-
Little circle turns/ page doesn't load/ problem triangle comes up almost all the time
The little connecting circle comes on and turns no matter what -- whether it's from a bookmark, an email, a typed in address. It turns and turns, then either times out or says problem loading page ALMOST all the time (I can't figure our why or why not). I just downloaded the latest versions of both Firefox & Thunderbird. I check my AVG and Firefox has a clear pass.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
I Shut down my Mac by holding in the power button after my iMac froze and now when I try to turn it back it on all I get is the grey screen with Apple loge and the timer and doesn't get any further. I have tried the diagnostic test but nothing was found.
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
Trying to save file, but get one of two errors 50% of the time
Here's a breakdown of my issue.
I'm a 3d artist working on some texture files for my models. I'm constantly saving the file to make quick changes and fixes, doing so quite rapidly. So much so I now have actions recorded to cut down on having to go to the directory to save over the older file. Now for the issue. I'll try saving over the file, but then I'll either be giving an error message saying "Could not save a copy as ________ because the file name was not valid" or "Could not save a copy as _________ because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the Properties command in the Windows Explorer to unlock the file".
This is my personal pc so I do have the permissions enabled. If I open up the directory where the file is saved after I get these errors the file is then gone. These errors go away if I wait about 6 seconds in between getting the error to save then it has a better chance of working. That's not all of the time though. Sometimes I have to go in and just save manually, which is a real pain when I have actions recorded. It's almost like the relay between Photoshop and my directory isn't fast enough or something's just internally wrong. I've been dealing with this for a year. 11 months and 29 days too long. Help please!!!BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
A screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
Macbook Pro is slow, freezing all the time and has Wi-Fi problems
Hello!
My Macbook Pro started acting kinda strange a couple of weeks ago. It's slow, freezing all the time and constantly connecting and reconnecting to the Wi-Fi network after around half a minute of usage.
Here is the story, as far as I know:
In the start of 2014, pup-up boxes started popping up on my Macbook Pro. They said that I had to enter a password for the Keychain to gain access to a service or something. The odd thing about it was that I had never set up my iCloud Keychain. It just started appearing without me knowing why. Unfortunately, I didn't know the password for this due to the fact that I never set it up. I tried every password combination that could possibly work, but I didn't get through it. I tried different solutions, but nothing worked out. I solved it by simply making a new user account on my Mac. I used this for like 1 month before the whole Mac with all its user started messing itself up.
It might be worth to notice that this secondary-user didn't require a password to log in, so when I closed my Macbook and re-opened it, it would continue where it was left off. This might have been the reason for the Mac sometimes to get really warm while being in my backpack, which might also have caused the problem. I am not sure though.
After using the secondary user for a while, the Mac started acting strange again. This time it was something different. One day, my girlfriend started up my Macbook Pro and noticed that it was extremely slow. I assumed it was just in the need of a restart, but that wasn't it. The computer started freezing all the time at first. It froze when I clicked something in an application, and I had to wait like 10 seconds for it to go back to normal. If I was typing anything on Facebook, it would freeze, but I could still use any other tab of the browser without any problems. However, they would freeze to if I did anything special on other websites. Every other program would also freeze for reasons like typing or clicking on anything.
After a short while, it started being really slow during startup and use. A few days ago, my Macbook Pro also started disconnecting from Wi-Fi networks while trying to load pages. It doesn't disconnect every time, but it does sometimes. It tries to reconnect after that, and if it succeed's, everything is back to normal for a while.
Additionaly, the battery have been draining faster, and when it reached 0%, the computer turned off and closed all the open programs. Normally it has entered Sleep Mode, but not anymore.
Do any of you have any clue what the issue might be?
I have done the following:
- Reset PRAM
- Restore to system defaults
- Installed AVG Antivirus and scanned it
- Repaired and verified disk in Disk Utility.
- Uninstalled Adobe Flash Player.
I hope anyone can help me! I really need my computer for educational use!1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/U.+\/Shared\//b'$'\n''s/(\/Users\/)[^/]+/\1USER/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '1d;/:$/{s/ *:$//;x;s/\n//g;s/\).*/)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^\(.+\) //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+\)$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA\(|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My sons just bought me an ipad mini especially so that I could check a certain website on which I sign up for jobs throughout the day. The website is updated constantly throughout the day with new jobs and the status of the jobs I already have accepted and worked on. (It shows the percentage of the job that has been done.) It worked fine only the first time I logged on with the mini. Since then (yesterday,) when I check the website, it lets me log in, but I only see the same exact information that was there the first time I went to the website using the mini. It seems to be 'frozen' on that particular first look. It doesn't update at all.
I know it is not updating because I have also been checking with my notebook computer and with the notebook, the website is up to date.
Maybe its Safari?
I had the same problem when I used a friend's iPad.
I wonder if there is a setting or something that I could change to allow the website to update to the time I check it.
If not, then the ipad mini is a terrible disappointment and I would like to return it.
If you can help me, I would be extremely grateful.
Thanks in advance...This issue can be caused by corrupted cookies or cookies that are blocked.
*check the permissions on the about:permissions page and in "Tools > Page Info > Permissions"
Clear the cache and remove cookies only from websites that cause problems.
"Clear the Cache":
*Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
My Macbook Pro will not boot up. How can I get to the time machine back up?
When I turn on my Macbook Pro, it gets to the gray screen with the Apple logo and the spinning beach ball and stays there. I use Time Machine with a Seagate external harddrive to back up my files. I at first thought recovery meant using Seagates's Replica software, so I followed the instructions, inserting the recovery CD and booting up to the C drive. The Seagate tecnical support person informed me that I was in error and that because I was using Time Machine, the Replica recovery CD would not be useful to me. Now I have two problems. I can't boot up, and I can't get the Replica CD out of the C drive. So I have several questions. How do I remove the CD? There doesn't appear to be a place to use the old paper clip method. Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.
historyrocks wrote:
How do I remove the CD?
Restart, hold the mouse button down as it boots, it should be ejected.
historyrocks wrote:
Once I've removed the CD, how do I reinstall the OS? I don't seem to have a hard copy of Mavericks that should have come with this laptop.
Lets take this step by step…
Once the disk is ejected see if 10.9 can boot normally.
If that fails let us know what happened.
Power off & disconnect your Time Machine disk and any other external disks just for now (so we know it is safe & not causing this issue).
Reboot & hold alt - it will take you into the 'boot picker' it will list all available boot disks. Make a note of how many disks appear and what the names are - let us know here.
You could try picking the 'recovery partition' if available. That should eventually show you a screen where you can select Disk Utility in the list of options…
In Disk Utility select the 'boot disk' – this is usually the item above 'Macintosh HD' (or whatever your boot disk is called).
Select the 'First Aid' tab
Repair any disk damage that is reported via 'verify'. Then select the 'Macintosh HD' & repair the permissions too.
Recovery mode explained…
http://support.apple.com/kb/HT4718
If you have no recovery partition you can use 'Internet recovery mode' (Command+Option+R at startup) - this downloads enough to repair & install 10.9. Try to use an ethernet connection for the internet - it can be many times faster & more stable than wifi.
Once that completes reboot, hold alt & select your main boot disk (maybe Macintosh HD) if it is available.
The recovery partition can also be used to download & install 10.9.3. However you should probably see what state the Mac's boot disk is in. It's possible that erasing & reinstalling is the only option. If you go down this route you can restore the Time Machine backup, but it's better to see if it can be fixed first.
Maybe you are looking for
-
All of a suddent all fonts are very choppy in firefox 36.0 on Windows 6.0. How can I fix this?
Everything in Firefox is very difficult to read, including this sentence. Fine on other computers.
-
How do I stop auto-complete of URl's?
When I type a URL I get at autcomplete of suggested URL's I have typed in the past and a drop down list of URL's I have typed in the past. How to I turn this off or at least clear it? I have already tried clearing my history and auto complete and I a
-
Mackeeper icon won't let me drag to trash
I am trying to uninstall mac keeper from my mac book pro. When I drag the icon to trash, it reappears in my app file. I have gone into my library and sent all the files with zoebit to trash. Also, I had to go in and remove all the cachdb files. I jus
-
Generating JavaHelp (online help) in Arabic Language
Dear Friends, I would like to know from you that I want to generate JavaHelp (online help) in Arabic Language. Could you please suggest me which tool will generate Javahelp in Arabic? Thanks & Regards, T. BALAJI Sr. Tech. Writer
-
CRM_MKTTG_TG_OP_CUST not called
Hello, In the Segment Builder I want to adjust the Target Group to specific customer demands (e.g. 1 BP - 1 IO). A Business Partner in a target group may or may not have no, one or multiple Individual Objects (1 BP : n IO). I found the BADI CRM_MKTTG