Roadmap Step Size

Hi all,
does anybody know if it is possible to change the size of every single step in a roadmap?
I think it do not look that good if every step has an individual length...so I'm trying to find out if
there is any possibility to change the size of each step.
Of course it would be perfect if I could set a parameter to the roadmap itself to define the length of every step...
Any idea????
Kind regards
Jens

hi,
no u cannot change the size as such. it will vary according to the size of the text you have for each step.
this is what i know. if you find any such property, then let me know.
regards,
ritwik

Similar Messages

Error during the PREP_INPUT/KX_CPYORG in the EXTRACTION roadmap step

Dear Gurus,
We are on SUSELinux 10 SP2
Oracle 10.4 and
I am in the process of applying EhP4 on top of my ECC 6.0 SR3 server and i m in the Extraction roadmap step and at a phase PREP_INPUT/KX_CPYORG which gives me the following error
Severe error(s) occured in phase PREP_INPUT/KX_CPYORG! on my SAPEhPGUi screen and no log gives a clear explaination of this error, i have checked the log KX_CPYORG.LOG and it is as below
======================================================================================================
2 ETQ399 Reading list file '/usr/sap/KDV/SYS/exe/run/dbatoolsora.lst'
3 ETQ399 Copying file 'dbatoolsora.lst'.
3 ETQ399 Copying file 'brarchive'.
3 ETQ399 Copying file 'brbackup'.
3 ETQ399 Copying file 'brconnect'.
3 ETQ399 Copying file 'brrecover'.
3 ETQ399 Copying file 'brrestore'.
3 ETQ399 Copying file 'brspace'.
3 ETQ399 Copying file 'brtools'.
3 ETQ399 Copying file 'initSID.sap'.
3 ETQ399 Copying file 'sapconn_role.sql'.
3 ETQ399 Copying file 'sapdba_role.sql'.
3 ETQ399 Copying file 'libsbt.so'.
1 ETQ399 Copied 784 files.
1 ETQ399 Failed to copy 1 files.
But doesnt say which file..
======================================================================================================
Apart from that i have also checked the log file SAPehpichk.log, which is as below
CURRENTPHASE PREP_INPUT/KX_CPYORG
...started at 20091004010834
Using phase log file 'KX_CPYORG.LOG'.
Kernel is replicated from /usr/sap/KDV/SYS/exe/run.
...begin dialogue at 20091004010846
======================================================================================================
i have also checked the files and the size of the /usr/sap/KDV/SYS/exe and /ehp4/EhPInstaller/EHPI/abap/exe folders and they look alike and no size difference among them.
Can anyone please help me come out of this situation.
I have re-run the Phase (repeated) many a times with no luck.
Awaiting any inputs on the same,
Million thanks in advance,
Baso

Dear All,
The issue is resolved and i did the following
1) Cancelled the Ehp4 installation
2) Deleted EHPI directory
3) Downloaded latest EhPI (which is released on 1 Oct)
4) Restarted the EhP4 installation
5) Changed the icmbnd file permissions in the source directory to 777 and owner to SIDadm
6) Copied it manually with the same permissions into the target exe directory (ehp4/EHPI/abap/exe)
7) After the phase reset the file permissions back to original in the source directory (/usr/sap/SID/SYS/exe/run)
Only one good suggestion is download the latest EhP installer
Hope this helps
Thanks to all
Regards
Hunky

Error in Preprocessing Roadmap step JOB_RSUPDTEC_SHD aborted

Dear All,
We are upgrading our server from R3 4.7 to ECC 6 EhP4. Our OS is AIX and database is DB2 9.5.
during Preprocessing Roadmap step JOB_RSUPDTEC_SHD aborted. This job run in phase JOB_RSUPDTEC_SHD on shadow system. We are getting the dump in shadow system
Runtime Errors         DATA_LENGTH_0
Exception              CX_SY_RANGE_OUT_OF_BOUNDS
                                                                                |
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
caught in
procedure "MODIFY_TABSPACE_DB6" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
In the executed program "RSUPDTEC", the system attempted to access the field
"DATA_TBSP_NAME" using the length 0.
However, a partial field access with the length specification 0 is not
|    allowed.
We have upgraded our kernel, dp_wp, R3trans, tp of 620 and 701 to latest avaliable. But still the problem cannot shortout.
ON seeing SAPUP log file PSUPDTECSHD.LOG we got this information
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ010 Date & Time: 20101018143359
4 ETQ260 Starting batchjob "RSUPDTEC"
4 ETQ230 Starting RFC Login to: System = "PRD", GwHost = "haeccsbx", GwService = "sapgw01"
4 ETQ233 Calling function module "SUBST_START_BATCHJOB" by RFC
4 ETQ233 Calling function module "subst_start_batchjob" by RFC
4 ETQ399 JOBNAME='RSUPDTEC', REPNAME='RSUPDTEC', VARNAME='', BATCHHOST='haeccsbx', IV_SCHEDEVER=' '
4 ETQ234 Call of function module "SUBST_START_BATCHJOB" by RFC succeeded
4 ETQ233 Calling function module "SUBST_CHECK_BATCHJOB" by RFC
4 ETQ010 Date & Time: 20101018143409
4 ETQ234 Call of function module "SUBST_CHECK_BATCHJOB" by RFC succeeded
4 ETQ239 Logging off from SAP system
1EETQ242 Error code "-1" during analysis of logfiles matching "RSUPDTEC\.PRD"
2EETQ262 Batchjob "RSUPDTEC" aborted
4 ETQ359 RFC Login to: System="PRD", Nr="01", GwHost="haeccsbx", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
2WETQ360 RFC of "subst_list_sys_logs" failed:
2WETQ361 code/exception : DUMP_ERROR
4 ETQ359 RFC Login to: System="PRD", Nr="01", GwHost="haeccsbx", GwService="sapgw01"
4 ETQ232 RFC Login succeeded
By analysis its seem that this is data length error but not able to understand how to solve this as we are using standared sap method of upgrade.

Hi Pritpal,
Please check note 1474361
Also you can update the system with latest database library dbdb6slib.The library has to be updated
for the SHADOW system in directory <upgdir>/abap/exe (and
<upgdir>/abap/exe_new as well) .Put the 7.01 version of library.
Regards
Ashok Dalai

How to change the Step Size to a specified value in a Chart?

Hi All,
I've built a report and include a chart to it to compute the average time of coming for employees among a month
Now I've changed the Maximum and Minimum values for labels of Data Axis at the graphics builder to 10:00 and 08:00, and checked the (auto) for Step Size
also I've checked custom value for the format witch is HH:MI
but when the report executes the chart no bars appeared for the apeared employees in the X-Axis!
Why? and How to solve this problem Plz?
Note: I'm using Oracle DB 10g and Reports 6i
Thank you

Thank you

Select_step problem in a dynamic Multiple RoadMap Step

Hi everybody,
I am working with a roadmap that dynamically assigns the number of steps from a data source assign to the multiple roadmap step. When I selected a step I am not being able to change the focus and yellow color to it. I already know which step the user selected by reading the context element assign to the multiple roadmap step, but what do I need to do in order to change the focus and color of it?.
I read other post that describe the same issue, and the answer was to change the lead selection of the roadmap, but when I tried to do it I receive a dump saying that I cannot change the lead selection.
This answered post [Re: Multipleroadmapstep Problem|] describes perfectly my problem and I already post the same question on it, but I think nobody reads it because the status of the post is answered..
Regards,
Eric
Edited by: Eric Hernandez Pardo on Aug 14, 2009 6:41 PM
Edited by: Eric Hernandez Pardo on Aug 17, 2009 12:36 PM

Hi Arpan,
I'm getting the dump exactly at this point " lo_nd_roadmap->set_lead_selection_index( vl_index )". I maded a few test based on your comment, with and without the '-index value' and also changing the context node bind to the selected_step, when I use the context_node "mrs" (this context is bound to the multiple roadmap step) like the code above I get no errors at all, but the step is not getting mark, neither changes its color. In this case I get the dump if I added the '-2'.
If I bind another context to the selected_step of the roadmap and do the same procedure (replacing the wdctx_mrs for the new context) I get a dump at " lo_nd_roadmap->set_lead_selection_index( vl_index )" with the '2' or '-2' values.
Any sugestions?
DATA: lo_nd_roadmap     TYPE REF TO if_wd_context_node,
        lo_el_roadmap     TYPE REF TO if_wd_context_element.
* navigate from <CONTEXT> to <MAIN> via lead selection
lo_nd_roadmap = wd_context->get_child_node( name = wd_this->wdctx_mrs ).
* get element via lead selection
lo_el_roadmap = lo_nd_roadmap->get_element( ).
data: vl_element Type Ref To IF_WD_CONTEXT_ELEMENT,
      vl_index type sy-tabix.
CALL METHOD lo_nd_roadmap->get_lead_selection_index
receiving
    index = vl_index.
vl_index = sl_roadmap-step_id.
lo_nd_roadmap->set_lead_selection_index( vl_index ).
Regards,
Eric

Roadmap steps are not visible after patching

Hi ,
After upgrading or patching ,roadmap steps are not visible in my application.
i have used several road maps in my application?
what is the reason for this?
Regards,
Lakshmi.

I have faced the same issue.
These are browser compatibility issues.
Different browsers behave in different manner.
There is a permanent solution for it to upgrade tools version to 8.52.03.
This update has been provided by oracle for resolution of browser compatibility issues.
Hope it helps !!

What's the FPGA step size and how to calculate it?

Hi there,
I inherited an vi with problem in it. It's basically reading the binary file then display it. So the vi reads the binary file by using Read From Binary File, the output data from this function then sends to FPGA after multiply a number (32767/10). But unfortunately I got a wrong output. The final output value for some reasons looks got attenuated. People told me maybe it's related to the FPGA step size, so I want to know what is the FPGA step size and how to calculate it. Can someone answer my questions here?
Thanks in advanced!!!

Hi Weny,
It sounds like you are trying to find out the output resolution of your FPGA module. It would be helpful if you provided what FPGA module you are using in your tests so we know what information to provide. For instance, the R Series Manual provides information on how to calculate the required DAC output code to generate the desired output voltage. You should also try to keep the accuracy of your device in mind. The analog output signal you are generating will be subject to gain, offset, and noise errors. You can use the specifications sheet (such as the R Series Specifications) of your device to determine what accuracy your board will have. The specs also provide information on the resolution of the board. You can search ni.com for the manual and specifications for your particular device if you are not using R Series.
Regards,
Browning G
FlexRIO R&D

How to implement Multiple Roadmap step with in a roadMap

Hi,
I am trying to implement Multiple roadmap step with in a roadMap.Can any one help me on this how to do it.
As of now i have added Multiple roadmap step element with in my Road map navigation and assign a data source which contains single attribute steps. I am stuck here open question like
1) How i map the view accordingly with the steps that are dynamically created
2) Weather i have to create dynamic plugs? to handle it
Can any one help me out or if you have any sample implementation please guide me through that link.
Thanks in advance.
Regards,
Karthikeyan R

Hi,
1. In the View add a RoadMapUI element.
2. Right click->Insert Steps (as many as required)
3. Set the design property of the Roadmap step as standard / selected (Highlighted if set to "Selected")
This is for a static approach i.e if there are 3 views, then in all the three views u repeat the procedure above and set the property as Selected for the required step.
For dynamic selection of roadmap, bind the design property to context attribute of type WDRoadMapDesign and set the property thru code.
Hope this helps you.
Regards,
Poojith MV

Maximum Step Size

Hi BlueOne,
we a have baseless rumor here at our department that says the maximum step size is 6000.
I have just done a 2PowerX Copy paste with the statment type.
I have stopped pasting after 8192 steps inside the sequnce
and let it run. Works - perfekt as assumed!
So just to clarify. Is the there a maxium step size?
Regards
Juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
Solved!
Go to Solution.

Juergen,
i have not found any information confirming or contradicting this officially. Fact is, that (as your quick test proves as well) i am not aware of a limit of "number of steps per sequence" in any TestStand version.
Granted, maybe there has been a limit in the past, but i doubt that.
I think the rumor originates by memory issues when loading tons of code modules for different steps on start of an execution.....
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Adding a new Custom Roadmap step

I was wondering if a new road map can added to the FPM Application. Suppose say, a ESS application has a road map steps of Overview, EDIT, Review/Confirm and Save. One more roadmap step has to be added at the end. In this step, user should be able to print an interactive form.
In the standard ESS application, this step is not available. Instead it is provided as a link in the "SAVE" step. This link opens up a Adobe Interactive Form. How to add a new ROAD MAP step so that once the user saves, next print should be automatically followed.
your help will be greatly appreciated.
Thanks!
Message was edited by:

Hi,
You can add any no. of Road Map steps at the end or in the middle...
Open the WebDynpro Component with prefix Cc (config component) go to Interface controller, in this check for the method <i>getROPState</i>....here u will find the Road Map steps defined...
Suppose u'r code looks like below:(with 4steps)
     ROPStep step1 = new ROPStep("1", "Overview",null);
           ROPStep step2 = new ROPStep("2", "Edit",null);
           ROPStep step3 = new ROPStep("3", "Review",null);
           ROPStep step4 = new ROPStep("4", "Save",null);
Add 5th step and include this new step in ROPStep as shown below:
(ROPStep is the one which is shown at the top with all the steps)
            ROPStep step5 = new ROPStep("5", "Print",null);
ROPStep[] rop = new ROPStep[] {step1, step2, step3, step4,step5};
Based on the perspective highlight the Step.

Setting the step size of the scale in a graph

I have a bar graph with floating point/decimal values. OBI automatically set the scale numbers/ticks on the y axis has to : 0.0%, 9.9%, 19.8, 29.7%, 39.6%, 49.5% and 59.4%.
I would like to have nice and even steps of 0.5%, but it seems like I cannot influence this anywhere.
The Axis Limits are set to Dynamic because I do not know in advance what the minimal and maximal values will be.
The only way to be sure of a constant step size is by defining the min and max axis limits and then setting the major and minor ticks. But since I don't know the min and max in advance, this is not an option.
Anybody any ideas on how to set a step size of the scale?

Anybody any clue?

Convolution and Step Size

I'm pretty sure it's my misunderstanding of how a convolution works or just a general misunderstanding of the LabVIEW program in general, but I seem to be running into a strange issue with the convolution function.
Attached is the VI for two functions that are supposed to be convoluted. The resulting function LOOKS correct, but I'm more curious about what happens when I change the step size of the two initial functions. As the step size decreases, the convoluted function seems to grow.
Can anyone tell me if this SHOULD be happening? And if so, WHY is it happening?
Or am I just doing everything wrong?
Thanks
Attachments:
Convolution example.vi ‏27 KB

I'm still somwhat unclear as to why the sum increases. I think it sems from my misunderstanding of what a convolution is. Reading those definitions didn't help all that much; much of the information went way above my head.
Even if I did increase the number of points defining the function, the point values adjust accordingly, meaning that smaller changes in the x result in smaller changes in the y. Therefore, the resulting sum shouldn't increase for each change in time point because the function itself is stillt he same. Unless, of course, the convolution is not being calculted according to what the function looks like but instead using the actual values themselves.
That brings me to my second point: How is the convolution being calculated without time values? By my meager understanding, a convolution is literally the sum of the overlapping area of two functions as the second inverted function is transposed across the first. Does the convolution VI assume that the bounds of the functions are the same to make this calculation, or does it assume that each point in the array is something like f(x), f(x+1), etc.?
Speaking of normalization, how would I calculate something like that? I sort of understand WHAT a normalization is, but I'm unsure how to even approach it.
Thanks.

JSpinner would not spin after step size change

Hi,
I am trying to figure out why my spinner does not work after I change the spinner properties.
The first spinner works fine, but the second spinner will not spin. I think it has to do with the step size, 0.1.
Does anyone know how to remedy this problem?
I have attached a part of my code. This code is later added to a BorderLayout South.
Thanks.
static Component createNorth() {
          JPanel N = new JPanel(new GridLayout(0,2,30,20));
          N.setBorder(BorderFactory.createTitledBorder("Foward Level"));
          final JSpinner FwdLevelSpin = new JSpinner(new SpinnerNumberModel(127,0,127,1));
          final JSpinner FwdTrimSpin = new JSpinner(new SpinnerNumberModel(0,-0.9,0.9,0.1));
ChangeListener l = new ChangeListener(){
          public void stateChanged(ChangeEvent evt) {
JSpinner newspin = (JSpinner)evt.getSource();
Object value = newspin.getValue();
String newValue = value.toString();
int IntValue = Integer.parseInt(newValue);
String Hex = Integer.toHexString(IntValue);
Hex = Hex.toUpperCase();
String Checksum ="00";
          if (evt.getSource()==FwdLevelSpin){
          System.out.println("FwdLevelSpin"+" "+ Hex);
SerialWrite Serial = new SerialWrite();
Serial.WriteToSerial("[024100" + Hex + Checksum + "]");
          else if(evt.getSource()==FwdTrimSpin){
          System.out.println("FwdTrimSpin"+" "+Hex);
SerialWrite Serial = new SerialWrite();
Serial.WriteToSerial("[022301" + Hex + Checksum + "]");
FwdLevelSpin.addChangeListener(l);
          FwdTrimSpin.addChangeListener(l);
JLabel FwdLevelLabel = new JLabel(" Foward Level ");
JLabel FwdTrimLabel = new JLabel(" Trim(Unfinished) ");
N.add(FwdLevelLabel);
          N.add(FwdLevelSpin);
N.add(FwdTrimLabel);
N.add(FwdTrimSpin);
return N; }

Hi there
I'm not 100% sure on my understanding of this with Captivate 5. I know the developers rebuilt it from the ground up with shiny new code, and I'm also aware that the text in the captions is rendered in a different way. But what I'm unsure of, is whether the Captions are still cached in the project.
Assuming Captivate 5 continues with the way the older versions worked, once a Caption was actually used in a project, all five types were cached in the .CP file. This means if you have a caption set named BlueBanner that has a bright blue banner at the top and you have used any of the different types or styles of that caption, that you cannot swap out the images so that perhaps you now see a bright red banner at the top. I mean sure, you can swap the images out all day long. But until you create a new project and use the caption for the first time in a new project, the captions are stuck at blue.
From what you have described, Captivate 5 seems to be continuing this behavior. Assuming it is, I would urge you to file a Bug Report to make the dev team aware that a change may be needed to the way these work. (link for that is in my sig)
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Develop Module use of + and minus keys to make adjustments, can the default step size be altered?

In the Develop Module you are able to click on the name of the slider and then use the + and - keys to adjust each element eg Exposure, Contrast etc etc. The adjustment steps are too large and I would like to be able to change the increments. Has anyone worked out if this is possible?

Hi Ian,
You are the last person I ever want to correct around here, but.... it's the . (period) / , (comma) keys for cycling through the Basic adjustments. This is very handy; thanks for pointing it out.
As for adjustment size, pressing Shift does make the increments larger, but pressing Alt (on PC) is for Resetting the Tone and Presence sliders. Using the +/- keys work as expected, but the Up and Down arrows don't always move the sliders.
John

Personalization of Roadmap steps in Roadmap UI element

Hi All,
I want to know of if it is possible to hide/unhide the Raodmap steps in the Roadmap UI element at runtime. When I do ctrl + right click, the entire roadmap is hidden.
Thanks,
Pooja

HI Pooja,
for personalizing i hope this would help u better :
Changing the position and visibility of UI elements for example, for fields and tables.
· Adding or changing additional interface information for example changing the button text or adding quick infos.
· Role-specific changing of interface labels.
· UI element roadmap: Removing individual, unneeded process steps.
· Statically changing individual field attributes.
· Changing the alignment of individual UI elements for example, line starting point, align right, centered alignment.
· Wider selection of fonts and colors for the interface layout
Hope this might help u.
For further ref check on to this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/11/01754276e4c153e10000000a1550b0/frameset.htm
Regards,
Nagarajan.

Roadmap Step Size

Similar Messages

Maybe you are looking for