Roadmap structure not visible - Urgent help pls...

Hello All,
I tried creating a custom roadmap with my own folder structure. I created it as all subfolders.
Once I am done with creation, I tried with RMMAIN transaction to view the same. But unfortunately I am not able to see the structure created by me.
I am sure that I am missing something with the 'Entry Screen' button of the RMAUTH transaction. But not able to figure out what it is. When I press the 'Entry Screeen' button, I am able to see all the folders I created for my Roadmap structure.
But the same is not visible in RMMAIN. Can anybody help me figuring out what I am missing and where I am missing?
Any input in this regard will be greatly appreciated. Thanks a lot in advance.
best regds,
Alagammai.

Without having to go into a lot of details on this - there are ample details on how to use these objects together to create a custom road-map. There can be a number of things wrong that are not being satisfied by the work you have done so far. You can access the guide in the http://service.sap.com/solutionmanager -> media library -> documentation -> 4.0 SP12 File. Goto the section on Creating RoadMaps - it can explain all the nuances better than I can. Personally I think that there is an issue with the flavor and how you have assigned your components such that when you created your project - there was nothing to display but go through the guide anyhow and see what might be the issue.
Remeber that you can always copy a RoadMap and then remove a bunch of stuff that you don't like - this is the typical method of doing business that I have seen that works pretty well. Making these from scratch can be a bit of a pain.

Similar Messages

Folder Structure Not Visible under Content Administration

Hi all,
We have EP 6.0 SP13.The Folder structure(Both Business objects and Portal Content) under Content Administration and Folder structure under System Administration is not visible.I have logged in as Administrator and the roles assigned were:
com.sap.pct.crm.crm_default_services
Administrator
ContentManager
eu_role
super_admin_role
When i'm trying to access the portal content,Loading...is dispalyed in Content Area for a while and a message 'error occured' is displayed in the status bar instead of 'Done'.
I'm also having a problem in Detailed Navigation.Nothing is visible under Detailed Navigation.
Any Inputs on the above issues would be of great Help.
Thanks and regards,
Vijaya Sai.V

Hi,
There could be only 2 problems when PCD objects are not being shown.
1) You don't have the permission to view it. But since you are an administrator, you don't have to worry about it.
2) The browser is unable to show the PCD objects.
Now lets look at the solution:
I had faced the same issues where when I tried to access the portal using IP address, PCD objects will not show. So the solution is to access the portal through its "name" rather than the IP address.
I guess you would have tried to access the portal by its name, then you had faced an error in browser and so you are trying to access the portal by IP address.
if this is true, make an entry in the hosts file in your local machine, mapping the IP address to the domain name.
If you dont know how to do it, please follow the following:
Goto the following folder in windows
C:\WINDOWS\system32\drivers\etc\
You will find a file named hosts. Open it in notepad and give the IP address & domain name of the portal in the format specified there. Save the file. Now if you access the portal using its domain name, you should be able to see the PCD. If you are still not getting it, restart the machine and try once more. It should work.
If you are using a Linux system, the file can be found under the \etc under the root folder.
Regards,
Vijai.
Message was edited by:
Vijai Mohan

I moved from an old macbook to a new one. I copied all my files onto a hard drive. On trying to setup my mail, i went into documents, microsoft user identities, office 2011 and it shows the database but wont let me select it. Urgent help pls

I moved from an old macbook to a new one. I have installed Office for Mac 2011. I copied all my files from my old notebook onto a hard drive. On trying to setup my mail, i went into my hard drive and accessed microsoft user identities, office 2011 and it shows the database but wont let me select it. Its almost as if the file is there but not accessable. I desperately need to access my old mail. How do I do this? I am fairly confident that I copied all files off my old notebook. Is there a way for me to search for the Database file? Maybe I copied it to a different location? Urgent help please.

Hello mafrerichs and welcome to Apple Support Communities,
Simplest way is to use Target Disk mode:
How to use and troubleshoot FireWire target disk mode - Apple Support
and hook to another Mac and use CCC or SuperDuper and clone your HD to another drive.
You could also pull the drive out of your MBP and use an external USB case or SATA - USB dongle to hook it to another Mac.
"MacBook Pro (15-inch Late 2011),... have a 15" 2012 Macbook pro with 2gb of ram, i7 processor"
That's a little confusing?

Appraisal template not visible-urgent!!

Hi All,
We have implemented Appraisals (MBO) module, we have created an appraisal template for same.
The data is now being transferred to production server, hence the problem is that the Appraisal template what we created is not visible in front end.
Hence can some help what may be the reason for this. I have check plan version & user paramters.
What are the other areas where we can lookin for this problem??
Thanks in adv,
nithi

Hi Maurice,
We have created the App template. Tough we have done all settings in SPRO in prod server, when checking it in Easy Acess it is saying that "Template does not existes" (i.e tcode APPCREATE)
We checked in Dev & Quality, there it is running properly. We even checked all parameters required for Per devp module.
Hence could you help me regarding this??

FOI Layer not Visible - Urgent

Hi All,
I have created a base map and able to view the map in HTML client. I have created one geometry theme for which I want to add as a themebasedFOI on the client side.
I have gone through the mapviewer examples and coded accordingly. In the mapviewer server , I can see output statements which states that features found for FOI theme , but still not visible on client side on the basemap.
and more query is regarding cache invalidation -- I created a tilelayer cache derived from the base map. What config should be done so that if any change in data , mapviewwer should invalidate the current tile cache image and generate new image based on the modified data. I have currently set the life time and interval time in mapviewer_Config.xml , but no change in tile cache if any data is changed.
Can anyone help on this?
Suresh

your problem seems to be that you didn't purge the cache of the map
you can purge chached metadata of the data source from
localhost:7001/mapviewer/faces/admin/admin_ds.jspx
if u changed some themes you can purge theme @ this page
http://localhost:7001/mapviewer/faces/admin/admin_memcache.jspx
about Map Tile layer
you can search about action of the two buttons "Bring Online" and "Take offline" of your tile layer from Manage Map Tile layers pages
http://localhost:7001/mapviewer/faces/admin/mcs_admin.jspx
Regards,
Abacy

Error in Installation of SAP R/3 4.7 - Urgent Help Pls !!!

Hi All,
I have a problem while installing SAP R/3 4.7. The Central instance has been successfully installed. Error occurred while installing the database instance. I am using SAPDB as the database. The error I get is the following:
**INFO 2008-03-01 14:15:57**
**Processing of host operation t_HostInfo_SHARED succeeded.**
**INFO 2008-03-01 14:16:07**
**The 'saploc' share exists at directory 'E:\usr\sap'. Choosing drive E: as SAP System drive.**
**INFO[E] 2008-03-01 14:16:56**
**Account group="ORA_GOK_DBA" does not exist. <#1>**
**INFO[E] 2008-03-01 14:17:05**
**Account group="ORA_GOK_OPER" does not exist. <#1>**
**INFO[E] 2008-03-01 14:17:23**
**Account group="SAPSRV\dbgokctl" does not exist. <#1>**
**INFO 2008-03-01 14:19:23**
**Copying file C:/SAP Dumps/Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML to: DBSIZE.XML.**
**INFO 2008-03-01 14:19:23**
**Creating file C:\SAPinst SAPDB SAPINST\DBSIZE.XML.**
**INFO 2008-03-01 14:19:23**
**Copying file system node C:\SAP Dumps\Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML with type NODE to DBSIZE.XML succeeded.**
**INFO 2008-03-01 14:19:23**
**Processing of all file system node operations of table tADA_Files succeeded.**
**WARNING 2008-03-01 14:19:24**
**Error 2 (The system cannot find the file specified.) in execution of a 'RegOpenKeyEx' function, line (274), with parameter (SOFTWARE\SAP\SAP DBTech).**
**ERROR 2008-03-01 14:19:24**
**MDB-07003 Exception occurred during Actor Call (Action READ_PROFILE_INFO).**
**ERROR 2008-03-01 14:19:24**
**MDB-07000 Execute Action READ_PROFILE_INFO failed.**
**ERROR 2008-03-01 14:20:47**
**MSC-01003 ESyException: ESAPinstException: error text undefined**
**ERROR 2008-03-01 14:20:47**
**FJS-00012 Error when executing script.**
**ERROR 2008-03-01 14:20:47**
**FCO-00011 The step fillR3loadPackageTable with step key SAPSYSTEM|ind|ind|ind|ind|ind|0|SAPComponent|ind|ind|ind|ind|ind|0|DatabaseLoad|ind|ind|ind|ind|ind|0|fillR3loadPackageTable executed with status ERROR.**
**ERROR 2008-03-01 14:20:47**
**FSL-02015 Node C:\SAP\DATA does not exist.**
Kindly let me know the solution to correct the error. Its urgent pls !!!
Regards,
Rose.

Hello,
The problem is caused due to the spaces in your directories
C:\SAP Dumps\Core Release SR1 Export_CD1_51019634/DB/ADA/DBSIZE.XML
Replace the spaces with underscores and restart the installation from from scratch.
Cheers
Bert

Firewire Port not working, URGENT help please¡¡¡

Hello People, i´ve just got a new Mac Mini last week, and i´ve been trying to get my Alesis MasterControl audio interface, and is just a complete mess.
This happened right after i´ve upgraded to 10.8.3 so i don´t know, the weird thing is that if i connect my old iBook to the Mac Mini the FW800 port works, but everytime i connect the audio interface, nothing happens, also the drivers from alesis, are up to date. i first thought about the port of the Mixer went bad, but it has 2 and non of them works, also thought about the cable but the same cable works when i connect my iBook, and the mixer is not bus powered, it has it´s own power supply.
Needless to say i´ve already done the usual reset PRAM, turn of the Mac unplugged for 30 hour to reset the bus. etc.
This is the usual firewire only system log that i get:
31/03/13 08:01:20.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 08:01:30.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 11:33:23.529 system_profiler[528]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:35:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:38:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:42:08.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:44:39.124 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.146 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:39.148 CleanMyMacHelperTool[583]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671"
31/03/13 11:44:39.149 CleanMyMacHelperTool[583]: Wont clean /Volumes/AlesisFirewire-3.5.3.8671 because disk image
31/03/13 11:44:52.727 coreservicesd[62]: Application App:"AlesisFirewireUninstaller" [ 0x0/0x7f07f] @ 0x0x7fb5c8c30050 tried to be brought forward, but isn't in fPermittedFrontASNs ( ( ASN:0x0-0x80080:) ), so denying.
31/03/13 11:44:52.727 WindowServer[85]: [cps/setfront] Failed setting the front application to AlesisFirewireUninstaller, psn 0x0-0x7f07f, securitySessionID=0x186a5, err=-13066
31/03/13 11:47:28.533 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:47:28.544 CleanMyMacHelperTool[656]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.3.8671",
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:49:26.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:52:39.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 11:57:22.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 11:57:34.000 kernel[0]: Alesis Firewire - 3.5.3.8671 preliminary - x86_64 CJ - May 3 2010 02:43:28
31/03/13 11:58:36.982 com.apple.launchd.peruser.501[155]: ([0x0-0x1d01d].tc.tctechnologies.AlesisFirewire.controlpanel[238]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:37.252 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[238] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115837_Mac-mini-de-Miguel.crash
31/03/13 11:58:39.831 system_profiler[267]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:58:50.676 com.apple.launchd.peruser.501[155]: ([0x0-0x23023].tc.tctechnologies.AlesisFirewire.controlpanel[274]) Job appears to have crashed: Abort trap: 6
31/03/13 11:58:50.837 ReportCrash[242]: Saved crash report for AlesisFirewire Control Panel[274] version 3.5.3 (3.5.3.8671) to /Users/m1kygarcia/Library/Logs/DiagnosticReports/AlesisFirewire Control Panel_2013-03-31-115850_Mac-mini-de-Miguel.crash
31/03/13 11:58:53.638 system_profiler[277]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 11:59:09.747 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.905 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 11:59:09.906 CleanMyMacHelperTool[300]: Mounted devices (
    "/Volumes/AlesisFirewire-3.5.6.11675"
31/03/13 11:59:09.907 CleanMyMacHelperTool[300]: Wont clean /Volumes/AlesisFirewire-3.5.6.11675 because disk image
31/03/13 12:00:47.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:00:59.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:01:56.720 system_profiler[269]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:05:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:08:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -_continuousScroll is deprecated for NSScrollWheel. Please use -hasPreciseScrollingDeltas.
31/03/13 12:12:42.277 AlesisFirewire Control Panel[245]: -deviceDeltaX is deprecated for NSScrollWheel. Please use -scrollingDeltaX.
31/03/13 12:12:42.278 AlesisFirewire Control Panel[245]: -deviceDeltaY is deprecated for NSScrollWheel. Please use -scrollingDeltaY.
31/03/13 12:13:53.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:25:29.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:25:38.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:28:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:28:33.906 system_profiler[273]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:31:41.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 12:35:16.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:35:26.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:37:53.513 system_profiler[266]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 12:39:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 12:39:49.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 12:42:55.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 53 bus resets in last 3 minutes.
31/03/13 12:46:50.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 68 bus resets in last 3 minutes.
31/03/13 13:01:30.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:01:41.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:05:27.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 79 bus resets in last 3 minutes.
31/03/13 13:06:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:09:43.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:13:31.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:13:45.006 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:13:45.008 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:13:54.818 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:54.823 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:13:56.372 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:13:56.375 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:15:40.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:18:46.763 com.apple.kextd[11]: Can't load /System/Library/Extensions/IOFireWireIP.kext - ineligible during safe boot.
31/03/13 13:18:46.768 com.apple.kextd[11]: Load com.apple.iokit.IOFireWireIP failed; removing personalities from kernel.
31/03/13 13:18:46.797 com.apple.kextd[11]: Can't load /System/Library/Extensions/AlesisFirewire.kext - ineligible during safe boot.
31/03/13 13:18:46.800 com.apple.kextd[11]: Load tc.tctechnologies.driver.AlesisFirewire failed; removing personalities from kernel.
31/03/13 13:18:50.775 system_profiler[221]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:18:52.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:21:03.488 system_profiler[235]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:22:37.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:24:07.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID 003ee1fffe88dc6a; max speed s800.
31/03/13 13:24:19.000 kernel[0]: Alesis Firewire - 3.5.6.11675 (x86_64) Aug 16 2011 01:20:23
31/03/13 13:31:00.926 system_profiler[316]: SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
31/03/13 13:33:03.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: 134 bus resets in last 3 minutes.
31/03/13 13:35:11.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:38:24.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:41:36.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:44:48.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 13:58:13.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
31/03/13 14:01:25.000 kernel[0]: FireWire (OHCI) TI ID 823f built-in: no valid selfIDs for more than 3 minutes after bus reset.
Can somebody help, please i´d gladly appreciate it.

I have this
System Profiler[170]
SPFWR ERROR: FireWire bus may be unstable. Other FireWire devices may be present.
& this
kernel FireWire (OHCI) Lucent ID 5901 built-in: no valid selfIDs for more than 3 minutes after bus reset.
Pls, help!!

Hard Disk Not Exist! help pls!

Hi techies,
I was using my hp compaq when I froze. I did powered it off and restarted only to be confronted with "hard disk not exist". I tried to run diagnostics on the hard disk as directed by the functions buttons and it kept say stuff, "install operating system for hard disk". I've met a guy who knows stuff about such n he says my hd is fried and I'll have to get a new one. I'm kind of surprised as the laptop is barely a year old. He took out the hard drive and put in an external drive enclosure and on connecting to another computer, he couldn't get a read on the hard drive.
My questions are;
- is it possible for me to retrieve all my files from my hard disk? It'll be like going back to the stone age to try to start afresh. If it is, how? If not all, what kind of files can I retrieve and how?
- what is the cause of this damage to my hard drive because my system gave me no warning.
Pls, reply asap.
Thanks guys.

Your friend did the pretty much standard procedure to see if any files can be read and retrieved from the failed hdd. There are data recovery companies out there but they aren't cheap. It is always advisable to have an external usb hdd for backup.
All hdds fail after time ,though laptop hdds seem to have a higher/faster failure rate due to the confined case and extra heat. SATA hdds seem to die much faster than the older Ide type drives in laptops and desktops from what I have seen.
Not uncommon to see posts about a laptop hdd dying after 1-1 1/2 years,though I have been fortunate with mine which is 3 yrs old. I do use a laptop cooling pad under mine which may contribute to it's longer life.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

IMessage and FaceTime not working, Urgent Help please!!!

Hi guys,
Need help urgently, my iMessage and FaceTime are both not working on my Macbook Pro.
The iMessage gives giving this message "Could not sign in. Please check your network connection and try again.", while FaceTime just simply cannot login.
Please help!!!

This could be a complicated problem to solve, as there are many possible causes for it. Test after taking each of the following steps that you haven't already tried. Back up all data before making any changes.
Before proceeding, test on another network, if possible. That could be a public Wi-Fi hotspot, if your computer is portable, or a cellular network if you have a mobile device that can share its Internet connection. If you find that iMessage works on the other network, the problem is in your network or at your ISP, not in your computer.
Step 1
Check the status of the service. If the service is down, wait tor it to come back up. There may be a localized outage, even if the status indicator is green.
Step 2
Sign out of iMessage and FaceTime on all your Apple devices. Log out and log back in. Try again to sign in.
Step 3
Restart your router and your broadband device, if they're separate. You may have to skip this step if you don't control those devices.
Step 4
From the menu bar, select
           ▹ About This Mac
Below the "OS X" legend in the window that opens, the OS version appears. Click the version line twice to display the serial number. If the number is missing or invalid according to this web form, take the machine to an Apple Store or other authorized service center to have the problem corrected.
Step 5
Take the steps suggested in this support article. If you don't understand some of the steps or can't carry them out, ask for guidance.
Step 6
From the menu bar, select
           ▹ System Preferences... ▹ Network
If the preference pane is locked, click the lock icon in the lower left corner and enter your password to unlock it. Then click the Advanced button and select the Proxies tab. If the box marked SOCKS Proxy is checked, uncheck it. You don’t need to change any other settings in the window. Click OK and then Apply. Test.
The result may be that you can't connect to the Internet at all. Revert the change if that happens, or if iMessage still doesn't work. Remember that you must Apply any changes you make in the preference pane before they take effect.
Step 7
Select from the menu bar
           ▹ System Preferences… ▹ Flash Player ▹ Storage
and click
          Block all sites from storing information on this computer
Close the preference pane.
Step 8
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to find and delete all items with "iMessage" or "com.apple.idms" in the name. Log out and log back in.
Step 9
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
If iMessage worked in the guest account, stop here and post your results.
Step 10
Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you start up, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start and run than normal, with limited graphics performance, and some things won’t work at all, including sound outputand Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. After testing, restart as usual (i.e., not in safe mode) and test again.
If iMessage worked in safe mode, but still doesn't work when you restart in "normal" mode, stop here and post your results.
Step 11
Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/com.apple.apsd.plist
Right-click or control-click the highlighted line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 12
Reset the NVRAM.
Step 13
Reset the System Management Controller (SMC).
Step 14
Reinstall OS X.
Step 15
If none of the above steps resolves the issue, make a "Genius" appointment at an Apple Store, or contact Apple Support. When you set up a support call, select "Apple ID" as the product you need help with, not the hardware model. That way, if you're not under AppleCare, you may be able to talk your way out of being charged for the call.

Send Invoices/Billing Doc by Email not displaying:Urgent help

Dear SD Guru's
I have a problem where I am trying to send my billing documents by email. When I use the output type Mail and Medium 7, Program:RSNASTSO, Form Routine:SAPOFFICE_AUFRUF_VX and I assigned a form which was designed by one of our abaper's. The result is the when I sent the billing document, its is sent to the mailbox but the billing document which will now be a PDF file does not open. What could be the problem??
On the other hane if we use medium 5 External Send, the mail it is not sent, it remains in status WAITING, and remains in transit in SCOT.
I urgently need to your help, as this functionality is now overdue.

Hie Vee
I have checked T-code NACE and taken a look at the table you said I should check, I actually noticed that the table is updated by the fields you input into NACE fields.
I am so stuck, but maybe you could just check for for your output type, the Medium, Program and Form routine you are using unless thay are all non standard. But the norm is you add Z to the standard so maybe the letters after the Z could give me a hint.
Plizzzzzzzzz!!!

Hi urgent help pls

pls i need help my blackberry keys has stopped working for 1 week now, took off the battery but it didnt help. cant do anything on the phone not even recieve calls, message or mail.pls what can i do without that it to a blakberry office

When you removed your battery, did you do it while your phone was turned on?
Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Payload structure not visible in Moni

Hello All,
One of the interface where we are calling RESTful webservice thru java code, when we calling java code from standalone the webservice working fine based on input parameters webservice sending response back, but the same one when I import in as Import Archive in PI, and test this scenario. I see success in moni, but I do not see request-target structure payload. I see only request sender-payload structure in moni.
At this point I only testing request map for call the webservice , where I am getting this error.
Any idea what is the cause of this? Network issue? but this java code working fine in same Network.
Trace showing following information:
<Trace level="1" type="T">Reading sender agreement</Trace>
<Trace level="1" type="T">Inbound validation by adapter does not take place</Trace>
<Trace level="1" type="T">Inbound validation by Integration Engine does not take place</Trace>
Other question was , since this class file we imported into PI, how do I send the input parameters to this class file. As original sender was file, from CSV file we'll take input parameters and send those to this java code and pass it to webservice.
Right now for testing purpose i have hardcoded input values in Java code and trying to call this webservice, and I am using sender side HTTP adapter to invoke this PI interface.
One more questions was, since we are calling this webservice thru java mapping, what adapter should I use in receiver?
Thanks,
Gayatri.

Hi Gayatri,
Any idea what is the cause of this? Network issue? but this java code working fine in same Network.
ans) Please include trace statements within java code to find out target xml created by the code.
here are few articles/blogs on the issue . A very useful blog
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/18/tracing-in-sap-pi-731-single-stack
by Kapila Epasinghe
**************** - Handling and Tracing Runtime Exceptions in Java Mapping (SAP PI/XI)
By Prasanna Krishna Mynam
Other question was , since this class file we imported into PI, how do I send the input parameters to this class file.
ans) The input source XML should contain necessary values. In case you need to pass fixed values to the mapping you can look into this article parametrized java mapping
http://help.sap.com/saphelp_nwpi71/helpdata/en/43/bc2fd4da1e1bbce10000000a1553f7/content.htm
One more questions was, since we are calling this webservice thru java mapping, what adapter should I use in receiver?
ans) try to execute the java mapping code from your local system. In this case you do not require any adapter to communicate with web service right?. Apply the same principle for java mapping within PI server. Here also you do not need any receiver adapter. In fact the whole idea of using a java mapping was to avoid using a receiver adapter.
Regards
Anupam

URGENT Help Pls - Absence type to be considered as Attendance in Time Eval

Hello Experts,
There is one specific absence type which has to be reported as absence in IT2001.
This abs type is something an EE works outside of office and need to be tracked as absence. And when the EE has scheduled to go out for work on this absence, there is an absence request form and approval process. Everything is in place.
But, since the EE is performing work on this absence, this absence type needs to be considered as attendance in Time Eval so that number of hrs work in a day gets added up. Plus, we have specific OT rules, it EE works more than 8 hrs and less than 10hrs in a day, he get 1.5 time rate in OT. And if he works more than 10hrs, he gets double OT. But if he works less than or equal to 40 hrs in the same week, he does not get OT.
Due to this complex OT calculation, the above absence type needs to be added or considered as regular working hrs so that the EE get OT accordingly.
Please reply me VERY URGENTLY. Somenone with helpful answer and/or suggession will be awarded points.
Thanks in advance

Hi Subodh,
Would you please send me those PCR's, i have a similar situation but with time, if he starts before 6am gets double time and after 6am he gets 1.5 times for overtime.
E-mail address:[email protected]
Thanks in advance
Prakash

Roadmaps are not visible

Hi Folks ,
I have created a project and i have assigned the roadmap but in the Transaction RMMAIN - im unable to see the Graphical presentation , Would like to know - How to view the Graphical presentation Icons - Do the needful. Thanks in Advance.
Amrita

Hi,
In RMMAIN Txn, once you uncheck ENTRY VIA STRUCTURE under SETTINGS-> USER SPECIFIC, you will be able to navigate thru' Graphical Entry Screen. After Unchecking, re-enter to RMMAIN. You can see the Graphical Entry Screen; Clicking on any item, it will take you to the respective node in the structure.
Also, you might have set some filters for the Structure. Check the FILTER STRUCTURE.
Does all the nodes are in Scope? Chk the Scope settings under EDIT->CHANGE SCOPE.
RMAUTH is used to edit the Roadmap. If you want to edit the Structure or the Graphical Entry Screen, you can edit it there.
Pls let me know if any queries.
Thnx,
Waseem.

Open Orders...Urgent Help Pls

How can we retrieve open and non cancelled only sales order documents for a particular material...Pls Help me out

Hi mavreck,
From table VAPMA (Sales Index: Order Items by Material) check VBUK (Sales Document: Header Status and Administrative Data) and VBUP (Sales Document: Item Status)
Regards,
Clemens

Roadmap structure not visible - Urgent help pls...

Similar Messages

Maybe you are looking for