Roaming configuration question with help needed!

I am installing multiple AEBS (4 to be exact) and I want to support a roaming network throughout my house. I have run through all the setups and have them all up running but it appears as I do not have the roaming part quite right. I have followed all the manuals , (setting bridge mode, SSID, WPA2, etc...) my question, that I cannot seem to find the answer to in any white paper - is at the wireless setup part -
I guess I should tell the quick layout. I have a router in my electric room so I just want the AEBS's to act as bridges with no DHCP - I understand that and have them configured that way, all with their own manual IP address.
Back to the question - I currently have 1 of the AEBS set on "create a wireless network" with the allow extend checkbox marked. The others set as extensions - when I do this - I lose my SSID completely and cannot connect wirelessly. Am I mixing WDS up with roaming a little? Should they all be set at "create wireless" or none -
Any help is very much appreciated!!
Thanks
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)
MacBook Mac OS X (10.4.8)

I guess I didn't explain it good enough?
All of my base stations (AEBS) are hardwired throughout the house - I do not want to use WDS (performance is to poor) I want them bridged. This is a fairly simple process using a product such as a Linksys Access Point - you just create a wireless network and choose a different channel for each WAP - maybe I just answered my own question?? The AEBS wireless setup asks (Do you want to create, do you want to participate in WDS, or do you want to extend a wireless network) I have been choosing create for 1 and extending for the others - not working. Should I be choosing create for them all and changing the channels is basically my question??
Thanks for the reply though!

Similar Messages

Changing DataSource Configuration using ConfigTool - Help Needed.

Hello Everyones,
I have an EP 7 which I have installed on a WAS ABAP + JAVA. The Data Soruce configuraion is in dataSourceConfiguration_abap.xml because of this I cannot create any new users in the Portal, can someone tell me how I can change this Config file using the ConfigTool and what procedure is to be used.
Thanks for your help,
John.
Message was edited by: John Bray

See Changing DataSource Configuration using ConfigTool - Help Needed.

Disk configuration and workflow help needed for lab video workstation

Hi All,
Setting up a video editing workstation for a research lab that will use Premeire to edit AVCHD Progressive clips (sometimes with 2 streams side-by-side, but usually single-camera) and export them to .mp4 for later viewing by video coders. We won't be using AfterEffects or adding anything to the videos other than some text (titles, maybe sub-titles).
The other purpose of this workstation is to act as a file server and backup system for other machines in the lab. Coders will be viewing the exported videos via other networked machines and working with Microsoft Office files that will be stored on the workstation's other HDDs. I'll have a physical backup drive and cloud backup via CrashPlan.
I've built a machine that is probably overkill, but the client (my wife) wanted it to be "fast," and the purpose of the machine might change in the future:
i7-4770K (overclocked a bit)
16GB RAM
Asus Z87-Pro
GeForce GTX 660
I have the OS (W7) and programs on a 256 GB Samsung 840 Pro SSD and currently have two 1TB Velociraptors to use for the Premiere workflow. I'm trying to figure out how to proceed with the purchase of the rest of the drives, and I want to keep the Premiere drives separate from the large storage drives from the lab that are networked and synced to cloud backup.
Following the recommendations for a three-disc configuration I've picked up on these forums, I could set it up like this:
C: (256GB SSD) (OS, programs, pagefile)
D: (1TB HDD) (media, projects)
E: (1TB HDD) (previews, media cache, exports)
F: (4TB HDD) (backups of media, projects, and exports and storage of other research files)*THIS DRIVE WOULD BE SHARED ON THE NETWORK
G: (4TB external HDD) (backup of F & drive that backs up to CrashPlan)
but it seems that would be a waste of the speed of the second 10k velociraptor. If I added another SSD and RAIDed the Velociraptors it would be:
C: (256GB SSD) (OS, programs)
D: (Two 1TB Velociraptors in RAID 0) (media, projects)
E: (256GB SSD) (media cache, pagefile)
but would I then need to add another dedicated HDD for previews and exports, or could I store those on the networked F: from above (which would be previews, exports, backups of media and projects, and storage of other research files) without taking a speed hit?
It seems overkill to have a dedicated drive for exports and previews (let's make that the new F:), then have them copy to the first 4TB drive (now G:), then back that up to the second 4TB drive (now H:), then back that up to CrashPlan. However, people might be accessing that network drive at any time, and I don't want that to slow any part of the video process down.
I appreciate any advice ya'll can give me!

Hi Jim,
Thanks for the encouraging response. I'm leaning toward the non-SSD option at this point.
To make sure I understand, are you suggesting I try using the Velociraptor Raid 0 in the 2 disk configuration suggested by Harm's Guidelines for Disk Usage chart? Like this:
C: (256 GB SSD) (OS, Programs, Pagefile, Media Cache)
D: (1TB x2 in RAID 0) (Media, Projects, Previews, Exports)?
Where I'm still confused there, and in looking at Harm's array suggestions for 5 or more drives, is how performance is affected by having simultaneous read/write operations happening on the same drive, which is what I understood was the reason for spreading out the files on multiple drives. Maybe I don't understand how Premiere's file operations work in practice, or maybe I don't understand RAID 0 well enough.
In the type of editing we'll be doing (minimal) aren't there still times when Premiere will be trying to read and write from the D: drive at the same time, for example during export? Wouldn't the increased speed benefits of RAID 0 for either read or write alone be defeated by asking the array to do both simultaneously?
Maybe the reason the Media Cache is on the SSD in the above configuration is because that is what will be read while writing to something like Exports? But that wouldn't make sense given Harm's chart, which has the Media Cache also located on the array....
Another question is, given that the final home of the exported videos will be on the big internal drive (4TB) anyway, could I set it up like this:
C: (SSD) (OS, Programs, Pagefile, Media Cache)
D: (2TB RAID 0) (Media, Projects, Previews)
E: (network shared 4TB HDD) (Exports + a bunch of other shared non-video files)
so I don't end up having to copy the exported videos over to the 4TB drive? Do you think it would render significantly faster to the RAID than it would to the 7200 rpm 4TB drive? I'd like to cut out the step of copying exported videos from D: to E: all the time if it wasn't necessary.
Thanks again.

Iphone questions:Please Help Need Opinions Too

I am currently overseas in Germany. I am looking to buy an Iphone, because it can play music, movies, internet, ect and big it's a phone. Is there a way to use the Iphone like a gsm prepaid or a way to work with it being a phone without going threw att and getting long distance charges. i will be here for the next 2.5 years. Also, is there anything else that would be helpful to know about the iphone.

the carrier for the iPhone in Germany is tmobile - not att - if you are going to be in Germany for 2.5 years you probably should buy a german iPhone - i dont know what tmobile has for plans if you go outside Germany or make international calls - in the US ATT has an international roaming plan that you can buy that redues the rate when using the phone in another country on a carrier ATT has roaming agreements with to 99 US cents a minute - dont know if tmobile has a similar plan in Germany - or what it costs if you call another country from Germany - you probably need to check into that
for awhile in the US if you didnt put in your social security number during activation ATT let it work as a prpaid - but i think tthey closed that loophile - maybe tmobile has some prepaid plan for the IPhone in Germany - i would talk to them - the rate plans are determined by the carriers not Apple
in 2.5 years the current iPhone will probably be superceeded by several nwer versions so i would worry about waht to do when you leave Germanyjust my opinion

Apple ID for children / unknown security question answers / help needed

Good morning:
I have a question about my son's Apple ID that's been lingering for a bit.
Two years ago I set him up with a new Apple ID to purchase games and the like using gift cards that he occasionally gets for his birthday or Christmas. He is currently only 12, so I had to set him up with a false birthdate. However, despite my best efforts I appear to have lost the answers to the security questions; I thought I answered them with correct facts from my own life, but I've tried many permutations and none seem to work.
In addition, I didn't set up the account with a backup email address, so I can't reset the security questions.
The problem manifests itself in purchasing apps on a new iPhone (he gets our handmedowns). Because it's a new device, he's not allowed to purchase anything from ther store until he verifies his identify by answering his security quesitons. Unforutnately, he can't. He still can download apps on iTunes on a computer, but that's not a great substitute. In addition, we worry that avenue will be cut off someday. It's particularly annoying since I understand the security considerations, but he's never had a credit card linked to his acccount, only store credit, so the risk with a hijacking is minimal.
So, what I need to do is to be able to reset the security questions. Any suggestion as to how I sould do that? I was giong to just call Apple and explain things, but one thing that concerns me is if I identify myself that may lock the account. Perhaps I should wait until he turns 13 in a few months and so could legally have his own account? One workaround would be to start a new account, but if his old one is locked than I assume his old purchases could not be retrieved in the future.
Thanks very much, and happy holidays.
- geoff

All downloads from the store are tied to the account that downloaded them, so if you do create a new account all of his existing downloads will remain tied to his old account.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then you will need to contact iTunes Support / Apple to get the questions reset (whether the 13 years old will matter if you contact them I don't know).
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312

Solution Design questions/suggestions/help needed

Hi,
I would appreciate any inputs regarding this.
I am thinking of designing Solutions in Solman for our landscape which consists of ECC 6 and PI 7.1; each having a 3 system landscape D-Q-P. Is there an issue if I create Solutions Dev, QA and Prod vs Solutions ECC and PI ? I am more in favor of the former because it allows me easier management of the landscape when I implement System Monitoring, EWA, System Administration to see everything for the critical Prod systems together. Do any of you see any downsides to this approach ? Or any advantages of creating Solution ECC and Solution PI ?
Also, from what I read from the documentation, I would need to create logical component for each system (ZECCDEV,ZECCQA etc) for the systems to show up in the solution landscape ? This is because in the definition of logical components, there is only one field to add the Dev or QA or Prod systems ? I still have to start working on this, so I could be wrong. Please feel free to correct me.
Any inputs would be appreciated since I am fairly new to this.
Thanks,
Shreya

Hello,
I am not really sure what you are asking.
Systems are usually defined (SID) in SMSY, then they are added to a logical component.
Logicals need to be in the customer name space, so they are copied from SAP References to a unique name prefixed by a "Z".
Multiple systems of any system type (PRD, DEV, QAS, TEST, SANDBOX...etc) can be added to a logical component.
One or more logical can then be added to a Solution.
This is basically how the Solution is built. There are some limitations you need to consider when naming systems.
For certain functions, like EWA reports they need to have a unique Installation # + SID, and in the case of a long_sid, it would be the Installation # + (1st 3 chars of the)Long_SID.
So if you want to know if you can have a PI system called DEV, QAS and PRD and a ECC system called DEV, QAS and PRD, you can. But if you name them ECC_DEV, ECC_QAS, and ECC_PRD, then you will have problems.
A logical name must be unique. But they show up in the system landscape as soon as they have been defined.
When the logical is added to the Solution, only system Types of Production are automatically set to "Put in Solution"
Even though you can see the systems of other types in the logical and in the solution. And any system that is not in status "Put in Solution" will not be visible when you try to use it, as an example create an EWA , you would select the solution and not see any other type but production systems to select. This is because system types that are not production need to be manually set to "Put in Solution". This is done in the solution, in Change/Edit mode, and right clicking on the system you want to put in the solution and selecting that option, then saving.
From your questions am and not exactly sure what you were getting at, but I do hope this general info helps.
Regards,
Paul

HT201363 security question reset help needed

how can i reset my security questions if i can't remember the answers to the original ones? i am trying to purchase a song, have money in my account, but can't answer the security questions. help

Alternatives for Help Resetting Security Questions and Rescue Mail
     1. Apple ID- All about Apple ID security questions.
     2. Rescue email address and how to reset Apple ID security questions
     3. Apple ID- Contacting Apple for help with Apple ID account security.
     4. Fill out and submit this form. Select the topic, Account Security.
     5. Call Apple Customer Service: Contacting Apple for support in your
          country and ask to speak to Account Security.
How to Manage your Apple ID: Manage My Apple ID

Syncing question Urgent Help Needed!

Hey guys.
I'm going to be getting a new iTouch tomorrow cuz mine is broken (I LOVE APPLE! Much better customer support and help than PC!)
I've emailed all my notes and screen cap pics to myself, and synced the iTouch.
Will this save my bookmarks in safari?
is there anything else I should make sure i have a copy of?
Thanks so much guys!!!

When you connect your new iPod to iTunes, it will offer to restore from the backup of your old one. When you do that and let it sync, it will be a clone of your original iPod. See these for info:
Backup: http://support.apple.com/kb/HT1766
Restore: http://support.apple.com/kb/HT1414

Simple question, Urgent help needed.(Session Related)

I am new in Java and i want help in the following query:
When there is no session already defined and no values assigned to the session and i run the
String session_loginName = (String) session.getAttribute("username");
command in a doGet method
What is the result to the string?
null? or something else?
My intensions are:
To have restricted areas in my web app and when a user clicks on a link which includes restricted content, to first call a servlet which will test if there is a session already and if not it will redirect to the Login page.
I am thinking to use the following code.
Will this work ok?
package mypackage;
import javax.servlet.*;
import java.io.*;
import java.sql.*;
import javax.servlet.http.*;
public class EntGroupRegistration extends HttpServlet{
private String url = "jdbc:odbc:test";
* Standard Post Method for Processing the HTML Variables
protected void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException,IOException
String session_loginName;
* Obtain username from session object
session_loginName = (String) session.getAttribute("username");
if (session_loginName.equals(null)) {
response.sendRedirect(
"http://localhost/se/Resources/changepassS.htm"); }else{
response.sendRedirect(
"http://localhost/se/Activities/GroupRegistration.htm");
Any suggestions upon the code?
Thank you for your time.

if session_loginName is null then how can you call equals method on it???? Always give it a little thought first before typing code...
try something like
if(session_loginName != null)
// you code as before
}

I pod touch question..help needed pls.

I have an I pod touch approx 3 yearws old. I have plugged it into my laptop and it says it it updated to the latest version.
When I try to download an app it tells me that I need to update it. Then I go into itunes and it tells me that there are no updates.
It is running 4.2.1 (8C148)
Any advice pls?

You have an iPod Touch 2nd gen which can only go up to iOS 4.2.1 so you have the latest version for your iPod.
If you are trying to download Apps that require iOS 4.3 or later you will not be able to do so.

Position Class...- Simple question - urgent help needed

I am only having problems with Position parameters....what the hell does a Position refer
to? A number? Do you supply a number for Position parameter to find a node in a
doubly linked list? It seems that it goes by that way, but how the heck do you located it
with a Position parameter p (Postion p)? Doubly /singly linked lists have no reference this
with numbers....I am only confused when you have instances like:
public Object remove (Position p) {.....}
How do you instantenously locate the appropriate node in a Linked list via Position p
parameter?
Everything else I understand!!!! It's just that Positioning is bugging the hell out of me...Do
I supply number 3 for a third node in a linked list? or what?

i can not see a Object remove(Position p) in LinkedList , and the only Position class I can think of is in javax.swing.text - which is to do with marking positions in text documents. ?
can you explain your problem better ?

User Creation in EP 7 - Help Needed.

Hi Guys,
We have installed an EP 7, I would like create users in EP 7 Database. My Data Source configuration file dataSourceConfiguration_abap.xml. I have installed a WAS 6.40 JAVA + ABAP
This means I have to create the user in ABAP, I would like to know how I can create a User in EP 7 Only and not in ABAP System, I have seen other posts where they mention that you have to create the User in ABAP First, is there a way where I can create users in EP 7 so that they remain in the EP System only.
Please do let me know.
Thanks,
John.
Message was edited by: John Bray

Hi John,
See my last answer in this thread: Changing DataSource Configuration using ConfigTool - Help Needed.
The xml I have referred to probably doesn't exist on EP7 any more?! Anyhow, the change from your to another xml isn't supported in general. Check out the corresponding notes.
Hope it helps
Detlev

Help needed in tibco Configuration with OAS 10.1.3

Hi,
I am trying to using OAS 10.1.3 and with Tibco JMS Provider. I have deployed the MDB that gets messages from Tibco JMS Provider. Now here is the issue I am getting the following errors any ideas on what might be wrong:
WARNING: Code-source C:\Oracle_Software\AS10g\1013\oc4j_extended_101320_sa\j2ee\
home\lib\tibco\jms.jar (from <library> in /C:/Oracle_Software/AS10g/1013/oc4j_ex
tended_101320_sa/j2ee/home/config/application.xml) has the same filename but is
not identical to /C:/Oracle_Software/AS10g/1013/oc4j_extended_101320_sa/j2ee/hom
e/lib/jms.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.
xml in C:\Oracle_Software\AS10g\1013\oc4j_extended_101320_sa\j2ee\home\oc4j.jar)
. If it contains different versions of the same classes, it will be masked as th
e latter is already visible in the search path of loader default.root:0.0.0.
2007-05-07 22:36:01.055 WARNING J2EE JNDI-00002 Resource reference jms/myQueueCo
nnectionFactory not found. Allowing J2EEContext creation to continue anyway.
2007-05-07 22:36:01.087 WARNING J2EE JNDI-00004 No javax.jms.QueueConnectionFact
ory found at java:comp/resource/TibcoJMSReference/QueueConnectionFactories/myQCF
07/05/07 22:36:05 Oracle Containers for J2EE 10g (10.1.3.2.0) initialized
2007-05-07 22:36:06.055 WARNING J2EE EJB-02009 [ejb1:ejb1:EnableMdb] Unexpected
exception by JMS provider: javax.jms.InvalidDestinationException: Destination "Q
ueue[enableQueue]" has invalid type "class com.tibco.tibjms.naming.TibjmsFederat
edQueue" and cannot be used with OC4J JMS..
2007-05-07 22:36:06.055 WARNING J2EE EJB-02009 [ejb1:ejb1:EnableMdb] Unexpected
exception by JMS provider: javax.jms.InvalidDestinationException: Destination "Q
ueue[enableQueue]" has invalid type "class com.tibco.tibjms.naming.TibjmsFederat
edQueue" and cannot be used with OC4J JMS..
2007-05-07 22:36:06.055 WARNING J2EE EJB-02009 [ejb1:ejb1:EnableMdb] Unexpected
exception by JMS provider: javax.jms.InvalidDestinationException: Destination "Q
ueue[enableQueue]" has invalid type "class com.tibco.tibjms.naming.TibjmsFederat
edQueue" and cannot be used with OC4J JMS..
2007-05-07 22:36:06.055 WARNING J2EE EJB-02009 [ejb1:ejb1:EnableMdb] Unexpected
exception by JMS provider: javax.jms.InvalidDestinationException: Destination "Q
ueue[enableQueue]" has invalid type "class com.tibco.tibjms.naming.TibjmsFederat
edQueue" and cannot be used with OC4J JMS..
2007-05-07 22:36:06.055 WARNING J2EE EJB-02009 [ejb1:ejb1:EnableMdb] Unexpected
exception by JMS provider: javax.jms.InvalidDestinationException: Destination "Q
ueue[enableQueue]" has invalid type "class com.tibco.tibjms.naming.TibjmsFederat
edQueue" and cannot be used with OC4J JMS..
2007-05-07 22:36:06.071 WARNING J2EE EJB-02014 [ejb1:ejb1:EnableMdb] All message
consumer threads have terminated due to provider errors, stopping MDB.
Any help is appreciated. Can someone please provide me the steps to configure OC4J with Tibco incase I am doing something wrong I know there is a document out there http://www.oracle.com/technology/tech/java/oc4j/1013/how_to/how-to-connect-to-tibco/doc/how-to-connect-to-tibco.html but somehow I tried following exactly what is listed in the document but it doesn't seems to work for me. Specially the following
deploying the resource adapter module (e.g., using admin.jar's "-deployconnector" command),
placing the <connector> element in the %ORACLE_HOME%/j2ee/home/config/oc4j-connectors.xml.xml file, and
pointing to the %ORACLE_HOME%/j2ee/home/config/oc4j-connectors.xml.xml file by placing a <connectors> element in the %ORACLE_HOME%/j2ee/home/config/application.xml file
Where do I make the changes in the sample for my needs if I have the following on Tibco side:
Initial context factory:
com.test.TestTibcoInitialContext
Provider url
ldap://someserver:389/ou=msg,dc=corp,dc=com
Destination(Queue):
testClientDestUD=D.TEST
Connection Factory
testClientUD=S.VV
Thanks for any help as I am bit confused going thru the doc.

Hi Alastair,
Thank you so much for this really very very helpful document but still I am facing some issues:
1.     The pdf file is specific to Linux environment while I have windows environment for:
Oracle Application Server 10.1.3.x
OBIEE Server 10.1.3.4
2.     We are using MS Active Directory for the domain login authentication process. I have configured the OBIEE with that Active directory to allow users to use their domain credentials to login to OBIEE. I need to provide the SSO in this environment. But the document provides very good and elaborated information about SSO using OID. Is there any way we can do SSO using MS AD or we have to import the users in OID?
3.     We are using a db table for the authorization process for users after authentication is passed in which we are storing the USER NAME and GROUP information. The Authorization block of rpd select the corresponding GROUP from this table using SQL query and authorizes the users for their access scope. I was trying to execute the function AD_Authorization using the sql supplied after creating it in db but it is showing the below error: (Oracle11gR2 DB Server)
SELECT getldapgroups('domainname\username') FROM dual;
ORA-31202: DBMS_LDAP: LDAP client/server error: Invalid DN syntax. 0000208F: LdapErr: DSID-0C090654, comment: Error processing name, data 0, vece
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.DBMS_LDAP", line 1487
ORA-06512: at "SYS.DBMS_LDAP", line 234
ORA-06512: at "SCHEMA.GETLDAPGROUPS", line 45
4.     Can we install OIM on Windows machine having the Oracle DB server installed already on it?
Your valuable response will be much awaited.
Thanks,

Need help in configuring CHARM with R/3 System landscape with seven systems

Hi All,
we are planning to configure CHARM for our R/3 landscape.our current STMS includes seven systems.in the current STMS the transports flow as below.
D20->C20->C21->C22->C23->T20->P20
we require the transports to move in the same way as stated above even after CHARM is configured
1.please let me know if we can configure CHARM with seven systems.
2.if yes, how would the import happen( ie Action for import appears for all systems?).
Regards,
Anand Reddy

HI andy,
the transports will move in the following order.
D20(DEV)->C20(Consolidation)->C21(integ)->C22(reg)->C23(unit)->T20(final test)->P20(production)
transport will start in D20,then imported C20 followed by C21,C22,C23,T20 imports and finally reach P20
the systems are not in parallel they are one behind the other
Anand Reddy

Help needed with CVI real time

Hi,
I am new to CVI real time and need help related to this. I will explain my scenario:
1. I have few configuration files (INI). Need to validate the files (range checking..etc) during start of the application.
2. When user clicks "START" in the user interface on the host machine, I need to generate outputs (analogs/discretes...) based on the settings in the config file and read some inputs from other instruments. ( I/O tasks like generating outputs/reading inputs i am planning to perform in RT side)
3. From the user interface, user can also change the config files. if user changes the files, again file validation needs to be performed. After changing the files, if user clicks START, need to take the newly enetered config files to perfom I/O tasks.
4. I am NOT using reflective memory for my application.
I am confused in the following area:
1. File validation during startup , do i have to perform on both host and RT side?????
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
Please guide me. Any help would be highly appreciated.
Regards,
haari
Solved!
Go to Solution.

Hey haari,
1. File validation during startup , do I have to perform on both host and RT side?????
This depends on the full range of responsibility for the INI files. If they are all needed simply to change what the I/O tasks are for, then you would technically only need to validate the INI file contents on the RT side. You could, however, validate on both sides if you wanted to. However, I would probably set it up such that I send a validation command to the target, have the target run a component of the code that validates the INI contents based on how I instructed it, and then return a message that says whether or not it met the requirements I specified. However, if you are concerned with offloading that process to the user desktop (instead weighing down the RT controller performance), you could FTP the file off of the controller and perform the validation process on the host side.
2. if configuration files are changed in the host side by the user, how i have to send this latest file names to RT??? I think i should not send file names, i need to read from the file and its contents i need to pass to RT....Pls correct me , I am not sure about this....
You can send them to the target over FTP. This can be done programmatically, through MAX, command window, or a Web browser.
3. If I have to send file contents to the RT, how I have to do that....means i have to use structures,..???
This is basically addressed in answer to question two. You would not need another structure in your RT code to handle the FTP receive component as this is handled by the FTP Client/Server communication. However, in the event that you successfully FTP a file to the target, you should likely send a message from the host to the target so that the target can respond accordingly and reload the file, reestablish the I/O values, run an idle procedure, or do whatever you like.
Hope this helps. Have a great day!
Tim A.
National Instruments

Roaming configuration question with help needed!

Similar Messages

Maybe you are looking for