Roaming problems after IOS Upgrade

We have upgrade our APs 1100 from Firmware 123-2.JA2 to new 123-4.JA.
We are using wireless with 7920 (firmware 2.0) and CCM (4.1.3 sr1); after the upgrade we have problems with roaming !!

Have same problem after upgrading to 123-4.JA running 7920.4.0-01-08.
After upgrading phones to 7920-4.0-01-09 roaming is OK (again)

Similar Messages

  • Airport Express problems after iOS Upgrade to 4.2

    Hello
    I have been having problems with my Airport Express since I upgraded to iOS 4.2. AirPlay does not work and have streaming delays and sometimes audio not coming out. I have my airport express connected to a Bose 1-2-3 Hifi Systems.
    Any help to solve this!!

    Yes, it's happened to me too, and I'm on 4.3.2. "Slide to Unlock" or "Slide to Answer" locks up the phone when the slider reaches the right side, which is supposed to unlock the phone. No choice but to force reboot.
    It's happened to me twice so far.

  • I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I installed iOS 5.0.1 on my Iphone 3GS. I never can not write in my calendar. Anyone else having this problem after their upgrade?

    I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
    It might be something in your backup.

  • After ios upgrade to 7.0.4 i got power botton and no sim problem need help      help

    after ios upgrade to 7.0.4 i got power botton and no sim problem anyone having this problem?

    Installing an iOS update does not add a physical button.
    As for the "No SIM" message, try removing and reinserting the SIM or replacing the SIM.

  • I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I bought a Sandisk Connect Media Drive, downloaded the app from iTunes.  Before iOS 8, movies played fine.  After iOS upgrade I can no longer play movies downloaded from iTunes to the media drive.  Anyone else have a similar issue?

    I checked with SanDisk's own online support and they indicate that they have notified Apple of the issue.
    According to SanDisk, the problem lies with Apple not having the iOS 8 version of the Safari browser having DRM decoding enabled that the Media Drive relies upon to decode and play iTunes DRM titles. Non DRM encoded videos will play in the browser.
    DRM audio is not effected as this is handled by the native iOS music app.
    As of the date of this post SanDisk have not been given a timeframe by Apple for this issue to be resolved.
    I hope that Apple resolves this issue quickly as I have a large collection of DRM video titles on a 128Mb memory card installed in the Media Drive that I am unable to view.

  • 3G icon in the status bar got disappear after ios upgrade 8.1

    3G icon in the status bar got disappear after ios upgrade 8.1

    Nginear48 wrote:
    Thanks for your quick response. I've tried everything you suggested and get only temporary fixes. Sometimes for a day or two, sometimes only until I use Safari for the first time. It's annoying and probably effects battery life between charges.
    You would think that it must have some effect on the battery, but oddly enough, the update to iOS 8 actually helped my battery life, in spite of all of these hinky little issues that are taking place. In my experience, the activity icon is not affecting the battery in a negative way.
    Another issue with IOS 8.1 that you may have seen is the loss of icon pictures on home pages. Again it seems to be Safari related, since app icons found in the App Store are not affected, only web based icons you personally put on home pages. I get what I call a test screen similar to what you used to get on old tv sets on every one of my personal icons.
    I know exactly what you mean. I got that as well. On a few of them, when I opened the websites using the generic test screen icons and then closed them, they changed back to the way that they should look. For the ones that did not change, I recreated the home screen shortcuts and deleted the generic looking ones - the test screen icons.
    And don't get me started on iBooks.
    For the very limited use that I make of the iBooks app, i haven't noticed any problems, but I rarely use the app. I don't read books on the iPad other than a few user guides and if they are pdf guides, they reside in more reliable and feature rich pdf apps on my iOS device.
    I wish that I had the fix for the spinning activity icon, but everything that I try, is temporary at best. IMO, this is the buggiest iOS update that I have seen, and I have been using iOS devices since iOS 3 on my first iPad. I realize that there are plenty of people that are not experiencing issues, but I have seen a number of weird things that I wish I could fix. None of my problems are major, but they are annoying.

  • Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

    BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

    All resolved at last
    Deleted the SMTP setting
    Recreated the SMTP using the same settings
    Able to send emails now
    No logic - as usual - just a bug!

  • IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

    PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore.  Just get an Apple Logo then a flashing blue screen as if it is caught booting up.   This has happened twice before and iTunes restore fixed it.  But this time device not appearing in iTunes.
    Running iTunes for PC.  But as stated restore has worked before!  Any help greatly appreciated!!

    Place the device in DFU mode and let iTunes restore the device to factory condition.

  • DataSource problems after BW upgrade

    DataSource problems after BW upgrade
    Upgrade from
    SAP NetWeaver 2004s: SAP_BW 700 0012 SAPKW70012
    to
    SAP EHP 1 for SAP NetWeaver 7.0: SAP_BW 701 0007 SAPKW70107
    BW system: PI_BASIS 7.01 SP 6
    ECC/source system: PI_BASIS 2005_1_700 SP 11
    Problem exists throughout, both with generic and standard DataSources.
    Here is one specific example:
    Generic DataSource ZXXXXXXXX
    InfoPackage "ZXXXXXXXX(ZXXXXXXXX)" does not run. Error:
    DataSource ZXXXXXXXX(SOURCESYS) must be activated
    Message no. RSDS179
    Then followed these steps:
    1. Replicate Metadata from source system
    2. Report RSDS_DATASOURCE_ACTIVATE_ALL from SE38 for source system SOURCESYS and DataSource ZXXXXXXXX
    Errors returned:
    Inconsistent user object ZXXXXXXXX SOURCESYS for PSA /BIC/B000XXXX
    Error saving DataSource ZXXXXXXXX SOURCESYS
    DataSource ZXXXXXXXX (SOURCESYS) could not be activated
    When I try to choose "Manage" from the context menu for the DataSource, I see an error:
    Invalid DataStore object name /BIC/B000XXXX: Reason: No valid entry in table RSTS
    Message no. RSM1294
    The following notes have not helped:
    https://service.sap.com/sap/support/notes/1377274
    https://service.sap.com/sap/support/notes/1383711
    https://service.sap.com/sap/support/notes/1489064
    https://service.sap.com/sap/support/notes/1056060
    And no other SDN threads seem to give fruitful suggestions.
    Any ideas?

    Hi,
    Just to help the folks out here.
    In my case,
    Inspite of going through several valid NOTES & program, my issue didnt resolve (you reply was pretty accurate - but dint help me :-)).
    I have resolved the issue by adjusting the PSA table for the same.
    Procedure:
    Take the psa name  --> go to table rstsods --> find the ODSNAME_TECH name for the relevant psa  --> se38 t.code --> enter ODSNAME_TECH and click on 'adjust & activate database table' (make sure you have selected 'save data' radio button.
    Just in case anyone who come across this problem, can do the above steps.
    Regards,
    Dubbu.

  • No valid license found after IOS upgrade on C3750x switch

    HI,
    Two switches below are working fine as a stack with IOS c3750e-universalk9-mz.122-55.SE5.bin & ipbase license.
    Switch#1 (Master, WS-C3750X-24P-S)
    Switch#2 (Member, WS-C3750X-24P-S)
    After IOS Upgrade to c3750e-universalk9-mz.150-2.SE7.bin, The stack was broken. Switch#2 didn’t recognise valid ipbase license with new IOS and came up with lanbase license instead. Therefore stack cannot be composed due to license mismatch between Switch#1 (ipbase) and switch#2(lanbase).
    I’m wondering why Switch#2 didn’t recognise ipbase license with new IOS even though IPASE is running well with previous IOS.
    Here is excerpt from “show version” with 15.x image on Switch#2.
    License Level: lanbase
    License Type: Default. No valid license found.
    Next reload license Level: lanbase
    Here is excerpt from “show version” with 12.x image on Switch Stack.
    License Level: ipbase
    License Type: Permanent
    Next reload license Level: ipbase
    Thanks
    Jeong

    Thanks guys,
    I have fixed the issue by configuring  'license boot level ipbase' on the member switch#2. The switch recognised IPBASE license well and joined the stack successfully.

  • HT4623 my i phone got hanging problem after ios 7 installation?

    Dear friends
    my i phone got hanging problem after ios 7 installation?
    please help me

    has your phone been jailbroken?

  • I have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    i have a mac, would like to upgrade to mountain lion from mac os x, anybody experienced any problems after this upgrade, thanks

    Check that your computer is compatible with Mountain Lion.
    To check the model number hold down the option/alt key, go to the Apple menu and select System Information.
    iMac (Mid 2007 or newer) model number 7,1 or higher
    MacBook (Late 2008 Aluminum, or Early 2009 or newer) model number 5,1 or higher
    MacBook Pro (Mid/Late 2007 or newer) model number 3,1 or higher
    MacBook Air (Late 2008 or newer) model number 2,1 or higher
    Mac mini (Early 2009 or newer) model number 3,1 or higher
    Mac Pro (Early 2008 or newer) model number 3,1 or higher
    Xserve (Early 2009) model number 3,1 or higher
    Your Mac needs:
    OS X v10.6.8 or OS X Lion already installed
    2 GB or more of memory (More is better - 4 GB minimum seems to be the consensus)
    8 GB or more of available space
    If you can/do upgrade, I recommend you make a copy of the installer and move it out of your Applications folder. The installer self-destructs. The copy will keep you from having to download the installer again.  You can make a bootable DVD/USB stick to install using this free program.
    Bootable Drive DVD or USB Flash Drive – Lion Diskmaker
    Our 2 computers haven't experienced any significant problems, even though others have. I find it much better than 10.7 Lion, which I used for a week before reverting to 10.6.8
    Mavericks is supposed to be released this fall, so you may want to wait.

  • Clock problems after IOS 4.2 upgrade

    We have 2 Iphone 4 at home, each connected to a different computer ( 1 Mac, 1 PC ).
    After the upgrade to IOS 4.2 both have a problem with the clock. When the phone is put on "update clock automatically" ,the following happens (We live in Belgium)
    -Phone 1 switches to summer time as soon as a connection with the provider is made. If you go to fly mode, or put the clock on manual, the correct time is displayed. This occurs wherever you are so it is not linked to the information provided by the cell tower. After a hard reset and restore, this problem was solved.
    -Phone 2 is even stranger. I was in NYC a few weeks ago and set the clock manually on EST. Back in Belgium everything worked fine until after the upgrade. Now the clock will go to EST overnight, ie when I wake up in the morning at 7 AM, it is suddenly 2 AM in the morning. Here, if you go to manual setting of the clock, then switch back to automatic setting, it works fine again.... until the next morning ! And I don't switch off the phone at night
    I guess a hard reboot + restore will be needed as well.
    Anybody else came across this problem ?

    Since 2 days I have the same problem with my Iphone.
    I also live in Belgium and my phone was all of a sudden 1 hour ahead of our local time. I modified the clock settings to manual and then the time switched back correctly. Today somewhere between 8 and 11 AM I noticed the clock was 1 hour ahead again. I adjusted the clock settings to manual again and the clock is correct again. How come this is happening ?
    It all started since my upgrade to version 4.2.1.
    Can someone please take a look at this ? For the record I use the 3 GS 16 GB version. My provider is Proximus.
    Seems my favorite Apple is starting to look a lot like Microsoft since this is the second major time/clock bug in a few weeks.
    Message was edited by: Renny74

  • Sound problems after iOS 4.2 upgrade

    Experiencing very poor sound quality after iOS 4.2 upgrade. Bad eq, left channel dropping out, sounds like heavy reverb. Exists with iPod and pandora apps. Tried adjusting eq in settings. Any one else having problems?

    Yep I just upgraded to new OS 4.2 on iPhone 4 and I get this static buzz sound when talking to people it's really annoying and sound quality is terrible. What happened? I went back to the shop and they said it's the upgrade and that there is an issue with it. They also said there is no point leaving the phone with them as they can't fix it that it's upto apple to release a patch for the problem. Can we get a fix for this soon before I damage my ears?

  • Dictation problems after ios 8.2 upgrade

    I rely heavily upon dictation.   2 problems occur (at minimum) after ios 8.2 upgrade to iphone 6. .
    1. I wasnt going to add this dictation bug (feature ;-)) b/c couldnt reproduce the seemingly safari bug when got home, but as I was dictating my first sentence for defect here, it happens in this text box on any line. :-(.
        1. Problem is as soon as dictation types in word Or words, when I hit done, it erases what was just dictated!  Happens on even just ine word. (So having to manually type all of this n I stink at typing ie, time consuming).
        2. I can paste characters from noteoad into here...so must be dictation relateD...it seems.
    2.  In the calendar textbox, when I dictate a new event (doesnt happen in location textbox) and the last character before it fills up the end of textbox (just before the "x"), it automatically does "done" for me (the beep sounds), it stops dictating, but more annoying is it will no longer allow me to continue dictating in that new event's top textbox.  That means I HAVE to type n I stink at that. To reproduce I simply:
    1. press the microphone.
      2. Type in only numerics 1 thru 17....it will dictate to look like this:  123 456-789-1011 1213 1415 1617
      3. "Beep/dong" noise because it hits the end of characters alowed it seems n decides it is "Done".
      4.  press the microphone
       5. "Beep/dong" noise because it wont let you dictate any more of anything said.
    I Couldnt find the entry where google shows someone with what looks like same issue/bug/defect/feature # 2, so entering this.
    I Have warranty but cant figure out how to get phone support for iphone (only mac ...last year).
    I don't seem to have this problem using i notepad in phone when he gets to having to wrap. :-)
    I Have not trieddictation on my mac...yet.
    CAn someone help on these issues please? Thanks!

    Hey Markwoody,
    Wow! That definitely sounds frustrating, but good job so far isolating and troubleshooting the issue. We have a few more steps that we can try in an attempt to resolve this issue:
    First, it sounds like you have tried restarting your phone. Let’s try a reset instead:
    Restart or reset your iPhone, iPad, or iPod touch - Apple Support
    https://support.apple.com/en-us/ht201559
    How to reset
    - You should reset your device as a last resort and only if you can't restart it.
    - To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    If the issue persists, we’ll want to restore your device to factory settings and test once more. You can backup your device, but be sure to restore it as new first for isolation purposes, as restoring a backup can sometimes restore the same issues that you were experiencing before.
    Use iTunes to restore your iOS device to factory settings - Apple Support
    http://support.apple.com/en-us/HT201252
    Thanks,
    Matt M.

Maybe you are looking for