Robo-call from NI

I just got a robo-call from NI because I registered for the upcoming NI Day conference. 
That was a mistake.  I would have thought NI's marketing department was smarter than that.
I will now make sure to give a fake phone number in all my NI profiles.
I don't mind getting relevant phone calls from NI.  But put a person on the phone.  Not a machine!

LordNobady wrote:
I know wat you meen. I just singed up for a CLAD exam and downloaded the prep package. 
and then thy call me to ask me if and when I was planning to do the exam. -_-
That happens to me all the time when I'm trying to help people prepare for the CLAD.  I am a CLA.  I don't think I need to sign up for the CLAD.
I actually put in a complaint to some people while I was at the CLA Summit back in March.  I was basically told that NI has several databases and they don't talk to each other.  So if you do anything on their site, your data gets put into a database and automatic emails are sent regardless.  NI really needs to do some research in getting these databases talking to each other.  That would reduce a large percentage of the emails I get from NI.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines

Similar Messages

  • Help: repeated calls from area code 266

    I am getting repeated calls at all hours from area code 266 and different numbers. When i answer i get mostly silence or some voice i can not understand. When I call back I am told the number does not exist. When I use google to trace the number (e.g.266 950 6008 or 266-949-1883 I am told there is not such number.
    What can I do to stop this?
    Verizon has told me that I may have to get a new number. Is there anything else I can try before this?
    Michjel

    You can block up to 5 numbers for free for 90 days via your on-line MyVerizon account.  You can block more if you pay $4.99 per month for the Usage Controls.  There's other threads on this forum that also talk about apps and other avenues (like You Mail) that you can use.
    I had several of those calls and blocked them.  After a week or two the caller would change their number (at least that's what I'm thinking they were doing), so I'd go in and block them again.  After doing this a few times, the calls stopped.  I think they were robo calls; even though you can be on all the do-not-call lists, you can still get those calls.
    I always ignore calls if I don't know who it is and let them go to voice mail.  If your phone allows you to send contacts to voice mail, you could put the numbers in your phone and send them straight to voice mail.
    I've had my number too long; I'll be danged if some marketer or prankster is gonna force me to change my number; I'd view that as a last resort, but that's just my opinion.

  • ROBO call blocker is blocking my wake up calls

    I've had wake up calls for 3 years using my FIOS landline voice mail. I also  Implemented robocall blocker about a year ago.
    Within the past week, the blocker is now stopping the wake up calls.
    Verizon, how do I get around this?  I've added the voicemail number that calls with the wake up call to my accepted list,
    still no resolution.

    dezyndiva wrote:
    that's part of the problem.  I don't recall now how I set it up.  However, It's illogical that I would have to turn it off
    just to get wake up calls.  Why now is the blocker recognizing the wake up call as coming from a robodialer, 
    it never blocked it for the past year.
    With FiOS digital voice, there is no native "ROBO call blocker" so you must be using something else.  If you're using something like nomorobo then it uses the simulatenous ring feature which can be disabled if nomorobo (or some other service like it) is blocking the call.  You check your simulataneous ring setup.

  • We are getting calls from "peoples connect u.s.a." telling us they are providers of service for Microsoft and Macintosh. They have been informed our computer has informed them our drivers are in going to crash. legit. We think they are bogus. Right?

    Does anyone else get calls from "Peoples' Connect U.S.A." indicating they have received error signals from our computer that that all drivers are going to crash and that our system is at high risk?

    I get about one a day, usually saying our Windoze computer is infected (we don't have a Win computer). I cheerily thank then for calling and say I need to transfer them to our IT manager (I'm a home user so no such thing), lay down the phone near a radio with elevator music, and go about my business.
    One person reported here within the last month that they fell for the trick. The callers ended up with $600 of her money for something that did not need fixing. They also ended up with her credit card number, her phone number, and her e-mail address. They had a good day; she didn't.
    As most of these calls come from overseas (I call them "Mike from Mumbai" calls), the FCC can't do much but wring their hands. They've not been able to stop the "Rachel from Cardholder Services" robo-calls that have been plaguing US households for nearly a decade.

  • Error while calling ejb service call from BPM service

    Hi,
    We are using the Oracle 11.1.1.5.0
    We are calling ejb service call from BPM service to update the data to Oracle database.
    We are getting the below error when we executing the ejb service call from BPM Service.
    <Error> <EJB> <BEA-010026> <Exception occurred du
    ring commit of transaction Name=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliver
    yBean.handleCallback(java.lang.String,java.lang.String,java.lang.String,int,bool
    ean)],Xid=BEA1-45B91984D57960994897(30845116),Status=Rolled back. [Reason=javax.
    transaction.xa.XAException: JDBC driver does not support XA, hence cannot be a p
    articipant in two-phase commit. To force this participation, set the GlobalTrans
    actionsProtocol attribute to LoggingLastResource (recommended) or EmulateTwoPhas
    eCommit for the Data Source = EBSConnection],numRepliesOwedMe=0,numRepliesOwedOt
    hers=0,seconds since begin=1,seconds left=60,XAServerResourceInfo[SOADataSource_
    base_domain]=(ServerResourceInfo[SOADataSource_base_domain]=(state=rolledback,as
    signed=soa_server1),xar=SOADataSource,re-Registered = false),XAServerResourceInf
    o[ArCnTaskForms@EBSConnection@EBSConnection_base_domain]=(ServerResourceInfo[ArC
    nTaskForms@EBSConnection@EBSConnection_base_domain]=(state=rolledback,assigned=s
    oa_server1),xar=weblogic.jdbc.wrapper.JTSEmulateXAResourceImpl@fa5476,re-Registe
    red = false),SCInfo[base_domain+soa_server1]=(state=rolledback),properties=({web
    logic.jdbc.remote.EBSConnection=t3://192.168.10.114:8001, weblogic.transaction.n
    ame=[EJB oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean.handleCallback(java.la
    ng.String,java.lang.String,java.lang.String,int,boolean)]}),local properties=({w
    eblogic.jdbc.jta.SOADataSource=[ No XAConnection is attached to this TxInfo ]}),
    OwnerTransactionManager=ServerTM[ServerCoordinatorDescriptor=(CoordinatorURL=soa
    server1+192.168.10.114:8001+basedomain+t3+, XAResources={eis/tibjms/Queue, eis
    /activemq/Queue, WLStore_base_domain_BPMJMSFileStore, WLStore_base_domain__WLS_s
    oa_server1, eis/fioranomq/Topic, eis/jbossmq/Queue, eis/Apps/Apps, eis/websphere
    mq/Queue, eis/AQ/aqSample, WLStore_base_domain_SOAJMSFileStore, eis/aqjms/Queue,
    WSATGatewayRM_soa_server1_base_domain, eis/sunmq/Queue, eis/pramati/Queue, SSCo
    nnectionDS_base_domain, eis/tibjms/Topic, eis/tibjmsDirect/Queue, eis/wls/Queue,
    eis/tibjmsDirect/Topic, EDNDataSource_base_domain, eis/wls/Topic, eis/aqjms/Top
    ic, RL3TST_base_domain, ArCnTaskForms@EBSConnection@EBSConnection_base_domain, S
    OADataSource_base_domain, WLStore_base_domain_UMSJMSFileStore_auto_2},NonXAResou
    rces={})],CoordinatorURL=soa_server1+192.168.10.114:8001+base_domain+t3+): weblo
    gic.transaction.RollbackException: Could not prepare resource 'ArCnTaskForms@EBS
    Connection@EBSConnection_base_domain
    JDBC driver does not support XA, hence cannot be a participant in two-phase comm
    it. To force this participation, set the GlobalTransactionsProtocol attribute to
    LoggingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source
    = EBSConnection
    at weblogic.transaction.internal.TransactionImpl.throwRollbackException(
    TransactionImpl.java:1881)
    at weblogic.transaction.internal.ServerTransactionImpl.internalCommit(Se
    rverTransactionImpl.java:345)
    at weblogic.transaction.internal.ServerTransactionImpl.commit(ServerTran
    sactionImpl.java:239)
    at weblogic.ejb.container.internal.BaseLocalObject.postInvoke1(BaseLocal
    Object.java:622)
    at weblogic.ejb.container.internal.BaseLocalObject.__WL_postInvokeTxRetr
    y(BaseLocalObject.java:455)
    at weblogic.ejb.container.internal.SessionLocalMethodInvoker.invoke(Sess
    ionLocalMethodInvoker.java:52)
    at oracle.bpm.bpmn.engine.ejb.impl.BPMNDeliveryBean_of8dk6_ICubeDelivery
    LocalBeanImpl.handleCallback(Unknown Source)
    at com.collaxa.cube.engine.dispatch.message.instance.CallbackDeliveryMes
    sageHandler.handle(CallbackDeliveryMessageHandler.java:47)
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:140)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: javax.transaction.xa.XAException: JDBC driver does not support XA, he
    nce cannot be a participant in two-phase commit. To force this participation, se
    t the GlobalTransactionsProtocol attribute to LoggingLastResource (recommended)
    or EmulateTwoPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    .>
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <failed to handle message
    javax.transaction.xa.XAException: JDBC driver does not support XA, hence cannot
    be a participant in two-phase commit. To force this participation, set the Globa
    lTransactionsProtocol attribute to LoggingLastResource (recommended) or EmulateT
    woPhaseCommit for the Data Source = EBSConnection
    at weblogic.jdbc.wrapper.JTSXAResourceImpl.prepare(JTSXAResourceImpl.jav
    a:83)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:1327)
    at weblogic.transaction.internal.XAServerResourceInfo.prepare(XAServerRe
    sourceInfo.java:513)
    at weblogic.transaction.internal.ServerSCInfo$1.run(ServerSCInfo.java:36
    8)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
    gWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    >
    <12 Oct, 2012 12:34:40 PM IST> <Error> <oracle.soa.bpel.engine.dispatch> <BEA-00
    0000> <Failed to handle dispatch message ... exception ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    ORABPEL-05002
    Message handle error.
    error while attempting to process the message "com.collaxa.cube.engine.dispatch.
    message.instance.CallbackDeliveryMessage"; the reported exception is: Error comm
    itting transaction:; nested exception is: javax.transaction.xa.XAException: JDBC
    driver does not support XA, hence cannot be a participant in two-phase commit.
    To force this participation, set the GlobalTransactionsProtocol attribute to Log
    gingLastResource (recommended) or EmulateTwoPhaseCommit for the Data Source = EB
    SConnection
    This error contained an exception thrown by the message handler.
    Check the exception trace in the log (with logging level set to debug mode).
    at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(Dispatc
    hHelper.java:207)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.process(BaseDispatc
    hTask.java:88)
    at com.collaxa.cube.engine.dispatch.BaseDispatchTask.run(BaseDispatchTas
    k.java:64)
    at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExec
    utor.java:886)
    at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor
    .java:908)
    at java.lang.Thread.run(Thread.java:662)
    >
    Could any body help on this issue.It is little bit urgent for us to resolve.
    Thanks in advance.

    Thanks Sudipto Desmukh,
    The link is helpful me to resolve this issue.
    Thanks,
    Narasimha E

  • Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it som

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

    Did you know that verizon charges ¢50 for calls from the US to Canada?  Just dialing an area code like 604 (Vancouver, CA), will create charges at a rate of ¢50/minute.  Amazing that they can charge this much for a call to Canada.  I know they have it somewhere in their contract/website.

  • Fields appear as "Read Only" in an Int.Form called from a WD

    Hi Experts!
    I am having a doubt in an Adobe Int.Form, that is called from a WD application.
    The fields that are in my Form, always appear as a "read only". It is not possible to modify anything there.
    Here, I describe the steps that I follow.
    I create a very simple WD application. In its WD View, exist an unique Object (Adobe Interactive Form).
    In that object, I set the properties:
    "Data source": a context variable type "my structure". "My structure", is a simple structure with a couple or three fields, let´s say PERNR, BUKRS, WERKS... It is linked to the Form Interface (ABAP DICTIONARY-BASED INTERFACE). So in this way, the link between my WD and the AdobeInt.Form is working.
    "PDF Source": a context variable type XSTRING.
    "Template Source": here I have set my Int.Form. Currently, it only contains a couple of fields
    "Enabled": True.
    "Read Only": False.
    In the AdobeForm, I have drag & droped those 2 or 3 fields, save it, and activate it. I guess nothing more is needed, for my test.
    And at last, in the View´s method WDDOINIT, I am reading one of those fields, let´s say the employee number (PERNR), and I set by hardcoding its number (let´s say -> 00000001).
    Until here, everything seems to work fine. When I launch the WD test, the Adobeform appears, at the moment, with only one of my fields (Employee - PERNR), and its value is filled in with '00000001'.
    But now, I would like to write something by myself. And when I try to do it, it is not possible! Field PERNR, is displayed as a "READ ONLY".
    Someone knows what is happening here? I guess it should be possible, to activate as a "EDITABLE" that field in my Form.
    So here is my doubt.
    Am I doing anything wrong? Or am I doing any mistake?
    Thank you very much in advance!

    Finally I think I have found the problem.
    In the View where I am printing the ADOBEFORM, it is needed this code under the method WDDOMODIFYVIEW.
    method WDDOMODIFYVIEW .
      DATA: LV_INTERACTIVE_FORM   TYPE REF TO CL_WD_INTERACTIVE_FORM,
                 LV_METHOD_HANDLER     TYPE REF TO IF_WD_IACTIVE_FORM_METHOD_HNDL.
      LV_INTERACTIVE_FORM ?= VIEW->GET_ELEMENT( 'INT_FORM' ). "   adobeform object in view
      IF LV_INTERACTIVE_FORM IS NOT INITIAL.
          LV_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          LV_METHOD_HANDLER->SET_LEGACY_EDITING_ENABLED( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_HIDE_NAVIGATION_PANEL( ABAP_TRUE ).
          LV_METHOD_HANDLER->SET_DISABLE_PRINT_BUTTON( ABAP_TRUE ).
          WD_THIS->M_METHOD_HANDLER ?= LV_INTERACTIVE_FORM->_METHOD_HANDLER.
          WD_THIS->M_METHOD_HANDLER->SET_HIDE_TOOLBARS( ABAP_TRUE ).
        ENDIF.
    endmethod.
    Regards,
    Carles

  • How displaying an alert message called from a database procedure

    Hi,
    How can I display an alert message that is called from a database procedure.
    I've tried the following code:
    l_al_button NUMBER;
    l_al_message VARCHAR2(80);
    l_al_id ALERT;
    Set_Alert_Property(l_al_id, alert_message_text,l_al_message);
    l_al_Button := show_alert(l_al_id);
    When trying I receive an error that says that the word ALERT need to be declared.
    Any suggestions?
    Thanks

    Hi,
    leave the procedure without error handling.
    This is what you can do:
    1.Inside the database procedure-
    BEGIN
    RAISE_APPLICATION_ERROR (-20001, 'The chosen length of the Public Key Exponent ....');
    END;
    2.Into your Form -
    BEGIN
    EXCEPTION
    WHEN OTHERS THEN
    IF sqlcode = '-20001' THEN
    Display Your Messages.
    END IF;
    Monica
    END;

  • ON-LOGON does not fire in Form B, called from Form A

    We have a situation like this. We are using Forms (Forms [32 Bit] Version 10.1.2.0.2 (Production)).
    We migrated this application to Forms 11.2.0.1.0. Problem is that the ON-LOGON trigger does not fire in the 2nd level forms. Our application work like this.
    (a.) User double-clicks URL icon.
    (b.) Form A is opened without asking for un/pwd. We put a NULL; in the ON-LOGON of A.fmb.
    (c.) This is the main form of the application. This has a canvas with 6 buttons. Each button will launch it's own separate application with it's own menu.
    (d.) Now user presses button in A. This launches Form B. We use
    Run_Product(FORMS, 'B', SYNCHRONOUS, RUNTIME,FILESYSTEM, pl_id, NULL);              (e.) Now, in Form B, in the ON-LOGON trigger we have put code to show the logon screen and login to the DB.
    Problem is, this works in 10g Forms. But we had to replace the RUN_PRODUCT with a CALL_FORM after migrating to 11g since RUN_PRODUCT is not supported in 11g.
    Problem is that when you use CALL_FORM to call Form B, the ON-LOGON of the Form B does not fire. We tried OPEN_FORM and NEW_FORM with different parameters, but the behavior is the same. i.e. ON-LOGON does not fire.
    What is the solution or workaround for this please.
    Edited by: user12240205 on Oct 15, 2012 4:50 AM
    Edited by: user12240205 on Oct 15, 2012 4:52 AM

    Michael Ferrante (Oracle) wrote:
    If you need to open another form you should use CALL_FORM, OPEN_FORM, or NEW_FORM. In these cases, ON-LOGON will not automatically fire because the connect info is passed from the calling form. If you need to login from the called form then you need to need to programatically cause that to occur. Refer to the LOGON and LOGON_SCREEN built-ins in the Builder help for more info. You can fire these from almost any trigger you like, for example in a WHEN-NEW-FORM-INSTANCE trigger or where ever is appropriate for you application.Michael, we tried using the CALL_FORM, OPEN_FORM & NEW_FORM.
    Also, there is NO connection to the DB, when B is called from A since we don't login to the DB in A (ON-LOGON has NULL;).
    So, if there is no DB connection when B is called, shouldn't the ON-LOGON in B fire?
    We tried firing the LOGON_SCREEN and LOGON in the WHEN-NEW-FORM-INSTANCE. But, for some reason, the we don't get the menu (we get a menu not found error). We tried correcting the paths and other things but still no solution.

  • Unable to call from my skype out account

    Hi!
            Iam unable to call from my skype out account to india, but i can able to call skype to skype users.pls advice.otherwise pls advice how to cancel the membership and get my money back.
    Regards
    Rajan

    Contact your carrier.

  • How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

    How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
    I can not change my Apple ID to the old mail (not possible!)
    The old mail don't accept the new password..
    I can not delete the Icloud all the time asking my the password of the old mail!
    I realy need help

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

    I keep getting calls from a block caller id and it's some dude speaking arabian what do i do? How do i stop this?

    Stop answering calls with blocked numbers. If it's someone who really wants to talk to you, they'll leave you a message and you can call them back.

  • How do i make a phone call from my mac

    i can't make a phone call from my mac nor receive phone calls

    NO my mac is on a different wi-fi than my phone

  • How do I make a phone call from my mac with yosemite?

    How do I make a phone call from my MacBook Pro on the Yosemite operating system?

    The following quotation is from Connect your iPhone, iPad, iPod touch, and Mac using Continuity
    There is more information in the link, including supported hardware and that you must have Settings > FaceTime > iPhone Cellular Calls set to on on the iPhone.
    Phone calls
    With Continuity, you can make and receive cellular phone calls from your iPad, iPod touch, or Mac when your iPhone is on the same Wi-Fi network.
    To make and receive phone calls, here's what you need:
    Sign in to the same iCloud account on all your devices, including your Mac.
    Your iPhone and your iPad or iPod touch need to use iOS 8 or later. Your Mac needs to use OS X Yosemite.
    All devices must be on the same Wi-Fi network.
    All devices must be signed in to FaceTime using the same iCloud account. This means any device that shares your Apple ID will get your phone calls. Look below for instructions on how to turn off iPhone cellular calls.
    Wi-Fi Calling needs to be off. Go to Settings > Phone. If you see Wi-Fi Calling, turn it off.
    Make a call
    To make a phone call on your Mac, iPad or iPod touch tap or click a phone number in Contacts, Calendar, or Safari.

  • I can send calls from Mac but incoming calls do not show up on Mac.

    Just downloaded Yosemite 10.10 on 10-21-14. I can make calls on my mac but unable to receive calls on my Mac. No notifications for incoming calls on my mac. Everything else runs fine. Messaging and calls from my mac works fine. I am running IOS 8.1 on a iPhone 4s. I have a 2009 Macbook Pro 2.54 duo with 8 gb of ram.

    There is no Adobe printer in recent versions of Mac OS. Look instead for a Save As Adobe PDF pull down.

Maybe you are looking for

  • Please help! My iphone 3g wont connect to wifi after password change.

    Hello Guru's, I have the iPhone 3g and just love it. I am able to connect yo my wifi connection at home. However, recently, I had changed my wifi security password. After that, My iphone 3g does not connect. It used to automatically connect. I select

  • ME21N and ME22N

    Dear Gurus, I have a question here. Currently I am using an user exit EXIT_SAPMM06E_013 which is used for transaction code ME21N to check PO before saving. This user exit is to trigger an email to user when there is a creation of PO. The user exit is

  • Time Capsule satelite

    I have a family and therefore a family of macbooks. Our timecapsule is in the front of the house, my home office, used sparely is in the back. I have just discovered that we have a concrete shelter masquerading as a bathroom in between (storm shelter

  • Composite Foreign Key

    Dear All please correct this syntax for composite foreign key. Ater Table emp_pays Add Constraints emp_pt_fk Foreign Key(emp_id,pt_id) Referenes emp(emp_id),pay_type(pt_id); Thanks in advances Regards,

  • Batch Details of Draft(Open) A/R Invoice

    How do i get details of draft (Open) A/R Inovice??? From which table can i get the batch details of draft A/R inovice??? For Posted A/R Invoice i can get the batch details from IBT1.