Robo6 WebHelp and imports
Hi,
I need to bring external .htm files that were created with
Robo7 into a Robo6 WebHelp project. When I try to import, nothing
happens. The Robo OLH only has instructions for importing into
WebHelp Pro. I'm assuming that I can't use import for a WebHelp
project.
Is there a way to bring these external files into my project?
Right now I'm cutting, pasting, and reformatting...not fun.
<sigh>
BTW, I've tried importing using File > Import, as well as
right-clicking the HTML Files (Topics) folder in the Project tab
and then selecting Import.
Thanks
Hi there
It isn't clear to me whether you are referring to bringing
RoboHelp 7 *Source* files or WebHelp *Output* files.
I could see where you may encounter some issues if you are
talking about the source, as these are a bit different than older
versions. I might still expect them to work, but require some
tweaking. If you are talking about the WebHelp output, you should
be able to do that as well. But keep in mind you will need to clean
the files of all the added JavaScript.
Cheers... Rick
Similar Messages
-
How do I save and import my bookmarks from another hard drive? When I try to open the installed Firefox on the old drive, it (obviously) opens a browser from the new main drive, free of bookmarks. Is there a way I can save the bookmarks on the old drive without opening a browser?
The guts of my computer were rearranged and I got a new main hard drive. My old one is still in there and I can get stuff from it, but when I go to the Mozilla folder on the old one, I can't figure out if there's anything I can do to get all my bookmarks from that drive to my new one, where Firefox is newly installed.If you open Firefox then Firefox will always use the default profile folder as found via profiles.ini on your system drive.
You either need to import the file in your current default profile or copy the file to your current profile folder while Firefox is closed.
Firefox 3 stores the bookmarks and the browser history in [http://kb.mozillazine.org/places.sqlite places.sqlite] and no longer creates an HTML backup by default.
There are also (five) JSON backups in the bookmarkbackups folder within the Firefox profile folder.
You can either copy the file places.sqlite to your [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] or import the most recent JSON backup from the bookmarkbackups folder of that old profile.
See:
http://kb.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox
http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
See http://kb.mozillazine.org/Profile_folder_-_Firefox
"Application Data" in XP/Win2K and "AppData" in Vista/Windows 7 are hidden folders.
See http://kb.mozillazine.org/Show_hidden_files_and_folders
Go to: Control Panel > Folder Options > "View" tab > under "Hidden files and folders", select "Show hidden files and folders".
You may want to un-check the box "Hide extensions for known file types" to see the file extensions of all files. -
How to update link and import data of relocated incx file into inca file?
Subject : <br />how to update link and import data of relocated incx file into inca file.?<br />The incx file was originally part of the inca file and it has been relocated.<br />-------------------<br /><br />Hello All,<br /><br />I am working on InDesignCS2 and InCopyCS2.<br />From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing).<br />Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon.<br />So I tried to recreate and update the links.<br />Below is my code for that<br /><br />//code start*****************************<br />//creating kDataLinkHelperBoss<br />InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*><br />(CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss)));<br /><br />/**<br />The newFileToBeLinkedPath is the path of the incx file which is relocated.<br />And it was previously part of the inca file.<br />eg. earlier it was c:\\test.incx now it is d:\\test.incx<br />*/<br />IDFile newIDFileToBeLinked(newFileToBeLinkedPath);<br /><br />//create the datelink<br />IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked);<br /><br />NameInfo name;<br />PMString type;<br />uint32 fileType;<br /><br />dlk->GetNameInfo(&name,&type,&fileType);<br /><br />//relink the story <br />InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); <br /><br />InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA);<br /><br />relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); <br /><br />ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); <br /><br />//Update the link now <br />InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); <br />UID newLinkUID; <br />err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); <br />//code end*********************<br /><br />I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.)<br />I tried using <br />Utils<IInCopyWorkflow>()->ImportStory()<br /> ,But its import the incx file in xml format.<br /><br />What is the solution of this then?<br />Kindly help me as I am terribly stuck since last few days.<br /><br />Thanks and Regards,<br />Yopangjo
>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases ! -
Question regarding Export and Import
First let me say that any software that comes without a save button should be sold with a warning label.
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
Can anyone help me upgrade my opinion of Lightroom from it's current level of POS to usuable?Ihatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/ -
Question regarding export and import of Hyperion Security during upgrade
Hi Guys,
We are upgrading Essbase, Integration Services from 7x to 9x which are utilizing Hyperion Hub and we are going to follow the method of uninstalling 7x and reinstalling 9x components.
Now my question is, what is the best way of transferring security from 7x to 9x. I heard that Advanced Security Manager can be used to export and import back security. Or is there any
other way of doing it??
Can someone please enlighten me on this.
Thanks in advance
KIhatelightroom wrote:
First let me say that any software that comes without a save button should be sold with a warning label.
Why?
Question 1: I have having an issue comprehending how to save a photo. In my case I select the photo, zoom in on the subject, export it to my desktop. The pciture on my desktop does not incorporate the change. Am I missing a step? What do I need to do to export it with this change? I actually watched a You Tube video on this and could not see what i was not doing.
You must have selected the wrong option in the Export dialog box. Under "File Settings", you need to select JPG and not "Original". Of course, you probably need to do some additional viewing of videos (or some reading) to learn that most people's workflow does not automatically include a "Save" or "Export" after editing the photo. It's not a necessary part of Lightroom's workflow, unless you need the photo for some non-Lightroom activity.
Question 2: I just installed Lightroom and am trying to import my 12k strong photo collection. The Import button pulls in about 2k and then cannot find anymore. The photos are stored in folders by date within a master folder. I am selecting the master folder. I can go in and import the sub-fodler individually. However i do not want to do that 200 times.There is no apparent way to go into the subfolder level and select more than one folder.
In the Import dialog box, on the left, under "Source", there is a checkbox that says "Include SubFolders". Make sure this is checked.
Seriously, you need to spend some time reading introductory material about LR because Lightroom does not work like any other photographic software you might have used in the past. You are handling it as if it was no different than standard photo editing software, and you are going to be frustrated if that is your mindset. See the videos at adobe.tv and read this: http://www.flickr.com/groups/adobe_lightroom/discuss/72157603590978170/ -
I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.
What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN -
i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal. -
We are under strict regulations and monitoring at my company. Because of this, we have to define what updates are being installed during a patch cycle by KB Article. Two production networks and one test network. The installed updates have to be the exact
same in the test environment, run for a few days with no problems, and then we install them in our production networks. The issue is, not all of the software in the environments is identical.
I need to figure out a way to take failed/needed updates from production that are unapproved, export that list so I can approve all of those updates in the test env.. Then once I approve those and any other needed updates in test, I need to be able to export
all approved updates from the test env (which includes the needed ones from production) and import those approvals in production.
How can this be done?
Thanks!the easiest way will be to use a single wsus infrastructre for all your environments.
Tis blog article explains how to duplicate the approvals over groups:
https://thwack.solarwinds.com/community/application-and-server_tht/patchzone/blog/2013/08/06/duplicating-approvals-from-a-test-group-to-a-production-group
MCP/MCSA/MCTS/MCITP -
Help on export sybase iq tables with data and import in another database ?
Help on export Sybase iq 16 tables with data and import into another database ?
Hi Nilesh,
If you have table/index create commands (DDLs), you can create them in Developper and import data using one of methods below
Extract/ Load table
Insert location method : require IQ servers to be entered in interfaces file
Backup/Restore : copy entire database content
If you have not the DDLs, you can generate them using IQ cockpit or SCC.
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01773.1604/doc/html/san1288042631955.html
http://infocenter.sybase.com/help/topic/com.sybase.infocenter.dc01840.1604/doc/html/san1281564927196.html
Regards,
Tayeb. -
SQL Developer 2.1: Problem exporting and importing unit tests
Hi,
I have created several unit tests on functions that are within packages. I wanted to export these from one unit test repository into another repository on a different database. The export and import work fine, but when running the tests on the imported version, there are lots of ORA-06550 errors. When debugging this, the function name is missing in the call, i.e. it is attempting <SCHEMA>.<PACKAGE> (parameters) instead of <SCHEMA>.<PACKAGE>.<FUNCTION> (parameters).
Looking in the unit test repository itself, it appears that the OBJECT_CALL column in the UT_TEST table is null - if I populate this with the name of the function, then everything works fine. Therefore, this seems to be a bug with export and import, and it is not including this in the XML. The same problem happens whether I export a single unit test or a suite of tests. Can you please confirm whether this is a bug or whether I am doing something wrong?
Thanks,
Pierre.Hi Pierre,
Thanks for pointing this out. Unfortunately, it is a bug on our side and you have found the (ugly) "work-around".
Bug 9236694 - 2.1: OTN: UT_TEST.OBJECT_CALL COLUMN NOT EXPORTED/IMPORTED
Brian Jeffries
SQL Developer Team -
Require help in understanding exporting and importing statistics.
Hi all,
I am bit new to this statistics.
Can anyone please explain me in detail about these commands.
1) exec DBMS_STATS.GATHER_TABLE_STATS (ownname => 'MRP' , tabname => 'MRP_ATP_DETAILS_TEMP', estimate_percent => 100 ,cascade => TRUE);
2) exec DBMS_STATS.CREATE_STAT_TABLE ( ownname => 'MRP', stattab => 'MRP_ATP_3');
3) exec DBMS_STATS.EXPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP',statid => 'MRP27jan14');
4) exec DBMS_STATS.IMPORT_TABLE_STATS ( ownname => 'MRP', stattab => 'MRP_ATP_3', tabname => 'MRP_ATP_DETAILS_TEMP');
I understand that these commands are used to export and import table statistics.
But please anyone help me in understanding this indetail.
Thanks in advance.
Regards,
Shiva.Shiva,
Please post the details of the application release, database version and OS.
Please see (FAQ: Statistics Gathering Frequently Asked Questions (Doc ID 1501712.1) -- What is the difference between DBMS_STATS and FND_STATS).
For exporting/importing statistics summary of FND_STATS Subprograms can be found in (Doc ID 122371.1)
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE&c_detail_type=source
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_details?c_name=FND_STATS&c_owner=APPS&c_type=PACKAGE%20BODY&c_detail_type=source
Thanks,
Hussein -
Language Problem while exporting and importing data
hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
RegardsLet me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum. -
Exporting and Importing of Schema
The Export and Import of Schema is not working consistently in SP4.
When I create a new repository from the schema, all the subtables get created. The main table is has only one field in it. It reads Category.
The other fields in the main table are missing and are not imported during the Import Schema operation.
Has anyone encountered the same issue?
If so, please let me know how you overcame this errorneous behaviour?Hi Adhappan
I have tried importing without success. The import is not consistent. The same schema creates different sets of tables & fields each time. Sometimes if you reimport some more tables which were not set up the first time gets selected for import.
I did a simple exercise to test the import / export functionality.
1. I unarchived a repository from standard content provided by SAP
2. I exported the schema
3. I tried importing the schema without any modifications to schema
4. The results were highly inconsistent.
Arvind
Pls reward useful answers -
Exporting and importing applications/workspaces
I am currently on a testing workspace and want to put the application/workspace to another workspace. I know the export and import commands but my concern is the application import. The application is linked to a sample table caled "Samp" and now I would need to link it to a table called "test". This table is almost eactly the same as "Samp" witht he exeption of 2 or 3 new columns. I am wondering what I need to do to change the link to the new table and whether the application will still work.
Thanks"419008",
In cases like this, where I know the table name is going to be different across HTML DB instances, what I usually do is create a view on top of the table, and then build my HTML DB applications against the view. Then, assuming the definition of the tables are the same, it should work without further modification.
So in your testing workspace you could have:
create view foo as select * from Samp
and in your other workspace you could have:
create view foo as select * from test
Joel -
Exporting and importing projects and DCs
We are not blessed with the JDI, and I am in a situation whereby I would like to take a project from one machine and import it into another.
I tried this by exporting to a ZIP file, but when I try to import it, I have to create a new project in the target system, then import the ZIP file into that. When I do that it does not seem to preserve the original structure of the project.
I noticed that there are many different formats in which the projects can be exported. Do any of these allow me to export the project and import it, preserving the internal structure of the project, ideally without creating a project in the target system first?
Kind Regards,
Tony.If you are working with the same version of Developer Studio on both PCs you can just copy the whole file structure of the project from your workspace to the workspace of the other PC.
Then, in developer studio of the second PC, choose "import existing project", and browse to the root folder of the project.
This should work, but keep in mind that eventually you will face versioning problems as you will make changes on both PCs...
Johan
Maybe you are looking for
-
Java to jar, with mainClass (something's wrong)
Hi. I know, there were some topics, about the java to jar issue, but I think this is different a bit... so the question is: I'm trying to make a .jar from my jave file, and I've found a tutorial for it on the net (and as far as I remember, I've used
-
i m having a problem in my web browser..it closes automaticaly. When i press the option button nd..aswel i try to open the page it close automatically..evn i closing all d app. Please help me
-
How to Flush DNS Cache in Mavericks 10.9.3
So I have seen references to the following when searching for a cmd to flush DNS sudo killall -HUP mDNSResponder and sudo dscacheutil -flushcache Which one is proper for Mavericks 10.9.3?
-
Small question on message processing
What is numberRetries,retryInterval,persistDuration and timeout during message processing.What are the default values.
-
THe screen didnt crack but alot of like black edging cane out though and I can see light through the back of the screen. It still works fine just wondering what I- "hit". Thanks!