RoboEngine install on IIS 6.0

I've followed the preinstall instructions on this page...
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=rb_e01
then went through the install guide to get roboengine installed on
a win 2k3 server.
Everything seems to install fine, then suddenly when I go to
test the report, not only do those pages come up 404, but all pages
on all sites hosted by that server come up 404.
Since I'm on IIS 6, I wasn't able to do the IIS lock down
tool as MS feels that one isn't necessary.
Anybody have an install guide or something that can help me
to install?

The only definitive install guide is pretty much what you see
on the URL you have already visited. It seems that there is
something more fundamentally misconfigured if you can't view ANY
sites? I don't see how installing RoboEngine can affect any other
sites on the server (caveat: I'm not a real IT person, but have
successfully set up RoboEngine on several machines successfully).
Invariably issues revolve around permissions, which you seem to
have covered.
Seems like you need to troubleshoot by perhaps uninstalling
RoboEngine and make sure that at least IIS is delivering a regular
website. Then, re-install RoboEngine on your designated domain and
hopefully have better luck. Sorry I can't be of more help.
John

Similar Messages

How to install joomla on IIS (windows 2012)

When one starts IIS, it immidiatly starts the webinstaller to choose a product and configure it.
I've been working now several days trying to install Joomla , tried it dozens of times.
At first it wouldn't install at all, kept hanging in the first phase, without showing any kind of error. It just halted non responsive. Now using IIS, i created a new blanc website (installer doesnt do it??), and in there I try to install joomla
Installation finishes.. but it still wont work errors like :
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
<fieldset>
Detailed Error Information:
Module
   IIS Web Core
Notification
   BeginRequest
Handler
   Not yet determined
Error Code
   0x8007000d
Config Error
Config File
   \\?\F:\Joomla\joomla_30\web.config
</fieldset>
Or i get errors like :
HTTP Error 403.14 - Forbidden
The Web server is configured to not list the contents of this directory.
<fieldset>
Most likely causes:
A default document is not configured for the requested URL, and directory browsing is not enabled on the server.
</fieldset>
<fieldset>
Things you can try:
If you do not want to enable directory browsing, ensure that a default document is configured and that the file exists.
Enable directory browsing using IIS Manager.
Open IIS Manager.
In the Features view, double-click Directory Browsing.
On the Directory Browsing page, in the Actions pane, click Enable.
Verify that the configuration/system.webServer/directoryBrowse@enabled attribute is set to true in the site or application configuration file.
</fieldset>
<fieldset>
Detailed Error Information:
Module
   DirectoryListingModule
Notification
   ExecuteRequestHandler
Handler
   StaticFile
Error Code
   0x00000000
Requested URL
   http://dc1.sapec.local:85/Joomla/
Physical Path
   F:\Joomla\
Logon Method
   Anonymous
Logon User
   Anonymous
</fieldset>
Now i am sure Joomla will install on any public Webhoster in seconds, as it is very popular.
But why wont it install on IIS, isnt IIS a prefered web server anymore in the eyes of Microsoft ?
In my situation i cannt make use of godady / or azure /amazoncloud, i have to install a Joomla locally.
Has microossft abondened the webinstaller perhaps.. ??
I dont understand you start a wizard looks great, promises me an automated installation (weeeew!!)..
But in the end leaves me a broken uninstallable product ?? with not much of a usefull errorlog.

Hi,
Regarding to HTTP Error 500.19 and
HTTP Error 403.14, please refer to following article and check if can help you.
Troubleshooting
HTTP 500.19 Errors in IIS 7
"HTTP Error 403.14 - Forbidden" error when you open
an IIS 7.0 Webpage
Based on your description, this issue seems to be more related to be more related to Web Platform Installer.
Please post it in Web Platform Installer forum.
I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

Trying to install IIS Powershell snap-in

Installed Powershell 4.0 on our Win2008 servers. Wanting to install IIS powershell snap-in to help automate IIS management.
Went to this URL:
http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=IISPowershellSnapin%3bIISPowershellSnapin
This launches the Web Platform Installer (4.6) which subsequently says:
Microsoft Web Platform installer couldn't find the product you tried to install.
How do you download/install the IIS Powershell snapin?
Powershell 4.0
Windows Server 2008

When you get to that message prompt in the WPI, type IIS in the search box in the upper right and hit Enter. Click the Add button next to IIS: Management Scripts and Tools, and IIS Manager for Remote Administration v1.2. I'm not positive which
one is needed because I tried both before actually trying to import the webadministration module, but one of the two definitely worked.
That installer seems really dysfunctional. The exe I downloaded said IISPowershellSnapin but then that component isn't installed by default and you have dozens and dozens of unrelated products that are available. Not to mention that the IIS Manager
for Remote Admin failed to successfully download and install completely for me....
I hope this post has helped!

How do I fix error installing IIS features

I try to install an IIS component (IIS Management Service), I keep getting the error that states..."An error has occured. Not all of the features were successfully changed."
This is on a 64bit Windows7 machine. Does anyone have an idea on how to fix this?

Hi,
Check the CBS log to see if there are any error information.
Meanwhile, try to use DISM command to add this feature in command prompt:
How to install IIS 7.5 on Windows 7 using the Command Line
http://blogs.msdn.com/b/habibh/archive/2009/08/14/how-to-install-iis-7-5-on-windows-7-using-the-command-line.aspx
if this error still exists, we can also review dism.log.
Alex Zhao
TechNet Community Support

Installing cf 8 on iis with cfmail and sql 05

Hello everyone,
I just purchased coldfusion 8 and have few installation
questions:
1) what iis options need to be installed prior to installing
coldfusion? (what are the minimum options needs to be installed
with iis)
2) do i need to have a mail server such as microsoft exchange
running to take advantage from cfmail or coldfusion just does this?
3) should i install sql 2005 prior to coldfusion installation
and what options of sql needs to be installed?
Thanks,
Mike

-- The default IIS options will do.
-- Yes you need to provide an SMTP server in the admin
inorder to make use of cfmail. New cfexchange tag can be used if
you have a exchange server.
-- SQL 2005 is not a pre-requisite. You can use access
database, by choosing to install ColdFusion ODBC services and
Documentation (both options should be selected).
- Vinu

Trouble installing PHP with Windows XO IIS

I followed the Live Docs instructions to install IIS and
tested it successfully; then I went to
http://livedocs.adobe.com/en_US/Dreamweaver/9.0/help.html?content=WS9C4F33E1-12B2-4e40-BD4 0-5D66C1F75EB6.html
aand followed those steps to download, install and test PHP 5.2.1
installer. After rebooting I tried to open the PHP test page
http://localhost/timetest.php
in Firefox but instead of displaying Windows asked me to select a
program with which to open it. How can I troubleshoot the PHP
installation.

Yes I was able to successfully open
http://localhost/test.htm in
Firefox;
One thing I neglected to mention that when installing
php-5.2.1-win32-installer.msi, I encountered a message not
mentioned in the Adobe docs. I was asked to choose a web server to
install and I chose None, since I had already installed Windows
IIS.
I had suspected my problem was with PHP, now what steps
whould I try?
thanks,
Gary G

Cons of installing installing IIS on Business Objects server

Hello Everyone,
Kindly help me with a doubt, how Business Objects server is going to be affected if we will install IIS in it. Cause I have another WCF application and have to host on the same server for which I need IIS to be installed.
Thank you for your time and patience!
Soubhagya Kumar

There is a .NET version of InfoView/BI Launchpad and the CMC that you would have to install after installing IIS. However, they are missing some functionality that your users may want/need - in particular in the Webi application. I know that at a former employer, I had to move off of our initial install on IIS to Tomcat because users couldn't run the Java versions of the Webi viewer and designer, so they couldn't get to some of the more complex analysis tools in their reports.
I did a quick search but was unable to find the specifics on this. Hopefully someone from SAP will check this thread and provide a link to some sort of comparison document. There is a mention that the comparison between the HTML viewer/designer and the Java applet will be published soon (as of last November) here http://scn.sap.com/community/businessobjects-web-intelligence/blog/2012/11/06/webi-influence-council-qa-and-presentation-from-teched-las-vegas.
-Dell

IIS 6 Metabase and IIS 6 configuration compatibility install

I am trying to install IIS 6 Metabase and IIS 6 configuration compatibility to my Windows 7 ultimate machine. the install fails, and the following log entry is created
Update IIS-Metabase of package IIS-WebServer-Package failed to be turned on. Status: 0x80070bc9.

Install the IIS 6.0 Management Compatibility Components in Windows Server 2008 R2 or in Windows Server by using the Server Manager tool
Click Start, click Administrative Tools, and then click Server Manager.
In the navigation pane, expand Roles, right-click Web Server (IIS), and then click Add Role Services.
In the Select Role Services pane, scroll down to IIS 6 Management Compatibility.
Click to select the IIS 6 Metabase Compatibility and IIS 6 Management Console check boxes.
In the Select Role Services pane, click Next, and then click Install at the Confirm Installations Selectionspane.
Click Close to exit the Add Role Services wizard.
Install the IIS 6.0 Management Compatibility Components in Windows 7 or in Windows Vista from Control Panel
Click Start, click Control Panel, click Programs and Features, and then click Turn Windows features on or off.
Open Internet Information Services.
Open Web Management Tools.
Open IIS 6.0 Management Compatibility.
Select the check boxes for IIS 6 Metabase and IIS 6 configuration compatibility and IIS 6 Management Console.
Click OK.
source: http://technet.microsoft.com/en-us/library/bb397374(EXCHG.80).aspx

Accidentally Removed IIS Role with Exchange installed

I had installed exchange 2010 on my 2k8 R2 server for testing purposes but forgot to un-install it.
I forgot this was still running on the server when I had to remove and re-install the IIS role on the server.
I've since tried to get Exchange working again but just wont start up and comes back saying the WinRM client cannot process the request.
It wont uninstall now either so any suggestions on how to rectify would be greatly appreciated!

Hi,
Just tried running through this but keeps failing. Any ideas as to why?
[05/12/2014 18:44:28.0113] [1] Setup failed previously while performing the action Uninstall. Looking for the failed task with ID ClientAccessOwaComponent___5effe7121e1740c083904cc189687464.
[05/12/2014 18:44:28.0116] [1] 68 tasks were found to execute.
[05/12/2014 18:44:28.0116] [1] Processing component 'OWA Configuration' (Installing/Removing Outlook Web App Component.).
[05/12/2014 18:44:28.0116] [1] Executing:
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
Start-SetupProcess -Name "$CommandAppCmd" -args "uninstall module exppw";
[05/12/2014 18:44:28.0217] [2] Active Directory session settings for 'Start-SetupProcess' are: View Entire Forest: 'True', Configuration Domain Controller: '1S-Server.1ststanmore.dyndns.org', Preferred Global Catalog: '1S-Server.1ststanmore.dyndns.org', Preferred
Domain Controllers: '{ 1S-Server.1ststanmore.dyndns.org }'
[05/12/2014 18:44:28.0217] [2] Beginning processing Start-SetupProcess -Name:'C:\Windows\System32\inetsrv\appcmd.exe' -Args:'uninstall module exppw'
[05/12/2014 18:44:28.0233] [2] Starting: C:\Windows\System32\inetsrv\appcmd.exe with arguments: uninstall module exppw
[05/12/2014 18:44:28.0409] [2] Process standard output: ERROR ( message:Cannot find GLOBAL MODULE object with identifier "exppw". )
[05/12/2014 18:44:28.0414] [2] Process standard error:
[05/12/2014 18:44:28.0507] [2] [ERROR] Unexpected Error
[05/12/2014 18:44:28.0507] [2] [ERROR] Process execution failed with exit code 1168.
[05/12/2014 18:44:28.0593] [2] Ending processing Start-SetupProcess
[05/12/2014 18:44:28.0594] [1] The following 1 error(s) occurred during task execution:
[05/12/2014 18:44:28.0610] [1] 0. ErrorRecord: Process execution failed with exit code 1168.
[05/12/2014 18:44:28.0610] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.TaskException: Process execution failed with exit code 1168.
[05/12/2014 18:44:28.0618] [1] [ERROR] The following error was generated when "$error.Clear();
$CommandAppCmd = join-path $env:SystemRoot System32\inetsrv\appcmd.exe;
Start-SetupProcess -Name "$CommandAppCmd" -args "uninstall module exppw";
" was run: "Process execution failed with exit code 1168.".
[05/12/2014 18:44:28.0618] [1] [ERROR] Process execution failed with exit code 1168.
[05/12/2014 18:44:28.0618] [1] [ERROR-REFERENCE] Id=ClientAccessOwaComponent___5effe7121e1740c083904cc189687464 Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[05/12/2014 18:44:28.0618] [1] Setup is stopping now because of one or more critical errors.
[05/12/2014 18:44:28.0618] [1] Finished executing component tasks.
[05/12/2014 18:44:28.0626] [1] Ending processing Uninstall-ClientAccessRole
[05/12/2014 18:44:28.0629] [0] The Exchange Server setup operation didn't complete. More details can be found in ExchangeSetup.log located in the <SystemDrive>:\ExchangeSetupLogs folder.
[05/12/2014 18:44:28.0631] [0] End of Setup

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit

How to Install Coldfusion 8 64-bit on Small Business Server 2008 64-bit
I ran Coldfusion 8 on SBS 2003 Premium for 6 months with no problems. When we finally decided to cut over to SBS 2008, that’s when everything went to hell. I tried for weeks to get Coldfusion 8 to install properly on the new SBS 2008 64-bit box. During the course which, I found bits and pieces of information for Vista 64-bit and Windows Server 2008 64-bit installations. There are some distinct differences, however, with SBS 2008 since it runs core Web applications like OWA, RWW and Companyweb. After countless unsuccessful attempts, one of which completed corrupted the box, I found the solution.
I have attempted in this white paper to detail the steps to assist others who may be in a similar situation. I don’t make any warranty for the information, but so long as you follow the steps carefully you should be fine. BTW, for those of you who say Adobe offers free technical support for licensed users, that’s not entirely true. Like I said, I purchased CF8 and originally installed it on an SBS 2003 Premium box. After we cut over to SBS 2008 and encountered problems, Adobe wouldn’t provide any technical support without charging. Moreover, based on my initial conversations with Adobe’s technical team, no one seemed to know much about running 64-bit on SBS.
From my understanding, only two versions of Coldfusion 8 can be installed in 64-bit: Enterprise and Developer. The “normal” install (which I paid a grand for) can only be deployed in 32-bit mode – gee, THANKS Adobe! By the way, in Developer mode only two distinct IPs can access the site in addition to the localhost. Any additional IPs will result in a CFML error message stating that the maximum number of IPs have been exceeded. At any rate, take your time and follow the steps to achieve a successful installation.
PRE-INSTALLATION TASKS
Back Up SBS
It’s always a good practice to backup your server before deploying any kind of major system changes. Although this step is optional, I recommend it in case you need to restore your server for any reason. Bear in mind, if your system ever gets totally corrupted, you cannot restore back from the twice daily incremental backup images alone. You will need a full backup with system recovery information to restore. Here are the basic steps:
Click: Start > Programs > Administrative Tools. Right-click “Windows Server Backup” and choose “Run as administrator”.
Click “Backup Once” under Actions in the right-hand pane.
Choose the “Different Options” radio button under Backup Options.
Choose the “Custom” radio button. What we’re primarily interested in here is backing up the OS – not your data partitions or attached drives.
Select the “SYSTEM (C)” checkbox, uncheck any others. Also, ensure that the “Enable system recovery” checkbox is selected before continuing on.
Under ‘Specify Destination Type’, I usually select the “Local drives” radio button and point it to a Terrabyte USB drive I use for backups. You can point this to a tape drive, or select the “Remote shared folder” radio button if you map to a UNC path to store your backup images. Just remember, make sure that whatever path you select can readily be accessed in the event of an emergency. Also, make sure the “Verify after writing (recommended)” checkbox is selected.
Under ‘Specified Advanced Option’, I usually select the “VSS full backup” radio button instead of the default since I don’t use a 3rd party backup product. If like me you rely solely on SBS for your backups, choose the full backup option.
Confirm everything and click “Backup”. This process may take several hours depending on the size of your system.
Verify ISAPI Filters:
In IIS Manager, double-click the server instance in the left-hand pane.
In the center pane under IIS, double click the “Modules” icon to verify that the ISAPI native modules are already installed for IIS. If it’s set up correctly you should see two entries:
IsapiFilterModule %windir%\System32\inetsrv\filter.dll
IsapiModule %windir%\System32\inetsrv\isapi.dll
If either of these modules are missing, you will need to re-install these (google for a solution).
Set Up Development Environment
Create a directory for your CFML files outside of the default Windows location (e.g., default is usually C:\inetpub\wwwroot\). For the purpose of our install, I created a directory on a separate disk called: D:\DEV.
Copy and paste your CFML files and directories into the new DEV root Web directory. This will eventually be the directory where the Coldfusion installer places the CFIDE and CFDOCS folders.
Open IIS Manager and double-click the server instance in the left hand pane. Expand the “Sites” folder. Right-click the Sites folder and select “Add Web Site”.
Enter a name in the “Site Name” box (e.g., “test-site”). You will notice that the system will automatically create a corresponding Application Pool with the same name. NOTE: this is important to prevent conflicts between the DefaultAppPool (needed for SBS Web apps like OWA, RWW, etc.) and the application pool needed for Coldfusion to function properly in SBS 2008.
Point the “Physical Path” to the directory you created in step #1 above (e.g., “D:\DEV”).
Don’t worry about testing the connection. If you click “Test Settings” you may receive a warning that IIS cannot verify access to path (D:\DEV). Don’t worry about this for the time being.
Under “Host name”, enter a DNS path to your site (e.g., “dev.test-site.com”). Click “OK”.
Configure Application Pools for Installation
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “False” to “True”, and then click “OK”. NOTE: if you skip this step, Coldfusion will not properly create the required mappings during the install. We will change this setting back after the installation completes – more on this later.
Modify the application.host.config File for 64-Bitness
Click: Start > Programs > Accessories. Right-click “Notepad” and choose “Run as administrator”.
Open the config file from within Notepad – default location: C:\Windows\System32\inetsrv\config\applicationHost.config
Do a search and change this one line from:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" />
To this:
<add name="PasswordExpiryModule" image="C:\Windows\system32\RpcProxy\RpcProxy.dll" preCondition="bitness64" />
Restart the IIS Admin service.
Set HTTP Compression
According to some threads I read, the http compression module can cause errors if you don’t disable it globally. To remedy this, perform the following:
Click: Start > Programs > Accessories. Right-click “Command Prompt” and choose “Run as administrator”.
At the command prompt, change directory to intetsrv by typing: cd inetsrv
Run the following command:
C:\Windows\system32\inetsrv>appcmd.exe set config -section:system.webServer/httpCompression /-[name='xpress']
This will turn off HTTP compression for all sites in IIS.
In IIS Manager, double-click the server instance in the left-hand pane. Double-click the “Compression” icon in the IIS section of the center pane.
Uncheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Recheck all of the boxes, then click the “Apply” button under Actions in the right-hand pane.
Restart the IIS Admin service. This should enable compression and coldfusion to work at the same time.
NOTE: if for some reason you need to reverse this, run the following command from the command prompt:
C:\Windows\system32\inetsrv\appcmd.exe set config -section:system.webServer/httpCompression /+[name='xpress',doStaticCompression='false',dll='%windir%\system32\inetsrv\suscomp.dll']
INSTALLATION TASKS
Download the 64-bit installation package from Adobe – filename: coldfusion-801-wind64.exe.
Right-click the file and select “Run as administrator”.
Accept the terms of the License Agreement.
If you have an Enterprise license, enter it. For our purposes, just click the “Developer Edition” checkbox.
Select “Server configuration” – the default radio button.
I deselected all subcomponents and can’t guarantee that you’ll arrive at the same results if you select additional items like “.NET Integrated Services”. It should be fine, particularly if you install documentation. My preference was to keep the install as plain vanilla as possible.
Select the directory path for Coldfusion to install into – default is :C\Coldfusion
THE NEXT TWO STEPS ARE CRITICAL TO YOUR SUCCESS. Unselect “All IIS Websites” and select the “Configure specific IIS Website or another web server” radio button. Click “Add”, and then select your test Web site (e.g., “test-site”) under “IIS Web Site”. Hit “OK”.
Do NOT use the default directory path for the CF Administrator location (e.g., default path: “C:\inetpub\wwwroot”). Instead, point the installer to your new DEV root Web directory (e.g., “D:\DEV”). The bottom line, you want the installer to place the CFIDE directory and files within this folder, alongside your other CFML files and folders.
Enter an Administrator password.
Choose to Enable RDS, or not. I enable this by preference but it is not required. This allows you to make updates to files using a CFML editor directly vs. having to move/FTP the files over if you’re working remotely. Opponents to this argue that it’s potentially less secure, but for a lower environment I don’t see this as a major concern.
Confirm everything to kick off the install.
If all goes well you should see a message at the end stating that the install was successful. I recommend you uncheck the box that asks you to open the CF Administrator in the default Web browser after the install. NOTE: we will open it a different way during the post-installation tasks. The worst thing that will happen if you forget to uncheck the box is that you might receive an error that the command prompt hung – not a big deal – just close it and move on to the next (final) steps.
POST-INSTALLATION TASKS
Verify CF Installation:
The installation will create a new folder in your program group: Start > Programs > Adobe > Coldfusion 8. The default “Administrator” link will not work because it points to the wrong path: http://127.0.0.1/CFIDE/administrator/index.cfm. The “127.0.0.1” or “localhost” path as you may recall in IIS, points by default to the “C:\inetpub\wwwroot” directory. Our CFIDE files, however, are located within: D:\DEV.
To bring up the CF Administrator logon page, open up a Web browser and replace the “http://127.0.0.1” part of the path with the DNS path name to your CF environment (e.g., http://dev.test-site.com/CFIDE/administrator/index.cfm).
This should bring up the Coldfusion Administrator Login screen. Enter in the Administrator password you created during the install to log in and configure your application server.
Verify that your test-site renders correctly by typing in your test URL into a Web browser (e.g., http://dev.test-site.com).
Fix Application Pool Defaults to Re-enable SBS Web Applications:
At this point, Coldfusion Administrator and your test CMFL Web site should be working properly. The problem is, default SBS Web applications like OWA, RWW and Companyweb will throw errors and fail to start. Fortunately, this is easily remedied by performing the following steps:
In IIS Manager, double-click the server instance in the left-hand pane. Click on “Application Pools” to display the list of server application pools in the center pane.
In the “Actions” pane on the right-hand side, click “Set Application Pool Defaults”.
Change “Enable 32-Bit Applications” - the second item from the top – from “True” to “False” this time. This should re-enable the SBS applications, which would otherwise result in 500 errors (e.g., OWA, RWW, Companyweb, etc.). There is no need to restart IIS.
Open a Web browser and test that you can once again connect to OWA, RWW and Companyweb successfully.
In IIS click to highlight the application pool for your new site (e.g., “test-site”). In the right-hand pane, click “Advanced Settings”. Ensure that “Enable 32-Bit Applications” – second item from the top – is set to “True” for this application pool specifically.
Lastly, jump up and down for joy! Hopefully now, everything is working. Best of luck!! ..Paul D (MCP).

First, it would be a good idea for you to specify what distro of Linux you're using, as not all are supported by Adobe.
Second, this is probably your problem right here:
http://askubuntu.com/questions/40416/why-is-lib-libc-so-6-missing
In a nutshell, CF expects the 32-bit version of libc.so.6 to be in /lib, but it's probably not. You might be able to modify the installer to point to the correct location for that file, or you might be able to create a symlink to the file - but as the above link describes, creating a symlink might have negative consequences.
As for installing CF 8 64-bit, that's only available with Enterprise, not Standard. If you want CF Standard 64-bit, you need to upgrade to CF 9.
Dave Watts, CTO, Fig Leaf Software

IIS 7.5 URL Rewrite: Hit specific page of a web application but should be redirected to another application's page

I have deployed 2 different web application on IIS 7.5 running on Windows Server 2008 R2 but on different port numbers i.e. one application deployed on port no. 1776 and another on 8091. I want to rewrite URL in such a way that if i hit any page of first
application such as default.aspx then it will be redirected to particular page of another application along with some changes in url.
Example: if i access any page from first application like:
http://g2wv126rbsc:1776/sites/main/commercial/commercial-solutions/financing/default1.aspx
then it should redirect to specific page of another application along with some changes in url:
http://g2wv126rbsc:8091/main/commercial/commercial-solutions/financing/default2.aspx
Note: In above mentioned url, also removed "sites".
I tried to create a inbound rule through URL Rewrite module (installed on IIS 7.5) by selecting Action as "Rewrite" but didn't find any success.
I need some examples if anyone has come across same kind of issue.
Thanks in advance.

Please post ASP.NET questions in the ASP.NET forums (http://forums.asp.net ).

CF11 install problem on WIndows server 2012 R2

We have a new install windows server 2012 R2 with a new install CF11 standard installed on C drive. Everything is 64bit. The CF administrator site and login works fine. cfm files will not serve up in the default directory, but IIS shows htm files fine. CF administrator runs fine.
Web Server Config tool will only show "None" in the IIS Web Site box. The usual CGI, APS, etc have been installed on IIS. In fact IIS and CF11 have been reinstalled. wsconfig.exe manual run shows no errors.
The problem is that any call to a cfm template results in an error (html pages serve fine):
HTTP Error 500.0 - Internal Server Error
The page cannot be displayed because an internal server error has occurred.
Detailed Error Information:
Module       IsapiModule
Notification       ExecuteRequestHandler
Handler       cfmHandler
Error Code       0x8007007f
Requested URL       http://localhost:80/default.cfm
Physical Path       C:\inetpub\wwwroot\default.cfm
Can anybody give any suggestions for troubleshooting? No logs seem to show any information that helps.

Fixed the problem......... it is not a CF problem alone but and mostly an IIS problem ....
1) remove IIS completely...... including the inetpub directory..... remove .NET Extensibility from server manager under Application Development if inetpub in use error is present... inetpub has to be deleted.
2) reboot
3) reinstall IIS and enable all the usual stuff, ie, CGI, ISAPI, .NET, ASP , WebSocket Protocol, etc under Application Development
4) restart IIS and CF
5) Set Web Server Config to "All"
60 restart IIS and CF
The trick to completely reinstall IIS and that is only done if you can delete the inetpub folder under root drive.

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Best practice for running multiple sites on 1 CF install?

Hi-
I'm setting up a new hosting environment (Windows Server 2008 Standard 64 bit VPS configuration, MySQL, IIS 7, CF 9)
Has anyone seen any docs or can anyone suggest best practices for configuring multiple sites in this environment? At this point I'm thinking simple is best, one new site in IIS for each client (domain) and point it to CF.
Given this environment, is anyone aware of any gotchas within the setup of CF 9 on IIS 7?
Thank you in advance,
Rich

There's nothing wrong with that approach. You can run as many IIS sites as you like against a single CF install.
As for installing CF on IIS 7, I recommend that you do the following: install CF 9 without connecting it to IIS, then installing the 9.0.1 upgrade and any hotfixes, then connecting CF to IIS using the web server configuration utility. This will keep you from having to install the IIS 6 compatibility layer that's needed with CF 9 but not with CF 9.0.1.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

WL 5.1 and IIS - HTTP Error 403 - Access Forbidden problems

I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing the Microsoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my default Web
site. This didn't help. I even tried creating a directory called public_html
inside public_html, setting execute privilages on it, and putting a copy of
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl and walk.
Cheers...
Dave Bruzzone
WebCredenza, Inc.

Thr problem is that you must set Execute rights to the IIS web at the
Configuration settings (exactly as seen in the documentation).
"Davide Bruzzone" <[email protected]> ha scritto nel messaggio
news:8iubob$mgp$[email protected]..
I'm trying to hook IIS up to the evaluation version of WebLogic Server 5.1
that I installed...
I followed the instructions that I found on the Installing theMicrosoft-IIS
(proxy) plug-in page. I then copied HelloWorld.jsp into the
d:\weblogic\myserver\public_html directory, and tried to bring it up in a
browser by typing in localhost/HelloWorld.jsp. At this point, I got the
following error:
** Begin error message **
HTTP Error 403
403.1 Forbidden: Execute Access Forbidden
This error can be caused if you try to execute a CGI, ISAPI, or other
executable program from a directory that does not allow programs to be
executed.
Please contact the Web server's administrator if the problem persists.
** End error message **
I then tried adding a virtual directory called public_html to my defaultWeb
site. This didn't help. I even tried creating a directory calledpublic_html
inside public_html, setting execute privilages on it, and putting a copyof
HelloWorld.jsp in there. This allowed me to type
localhost/public_html/HelloWorld.jsp into my browser, and to see the JSP
source code!?#...
This is what my iisproxy.ini file looks like (It lives in d:\weblogic):
** Begin iisproxy.ini **
# This file contains initialization name/value pairs
# for the IIS/WebLogic plug-in.
WebLogicHost=localhost
WebLogicPort=7001
WebLogicCluster=
ConnectTimeoutSecs=20
ConnectRetrySecs=2
** End iisproxy.ini **
Any suggestions/help from someone who's done this before would be greatly
appreciated. We can't run/evaluate the product before we can crawl andwalk.
>
Cheers...
Dave Bruzzone
WebCredenza, Inc.
[isapi2.gif]

RoboEngine install on IIS 6.0

Similar Messages

Maybe you are looking for