RoboHelp 10 - error msg - " ... trying to save data to root.fpj"

I am using RoboHelp 10 to create WebHelp. I keep all the files on my local hard drive. There's a file repository at our SharePoint site and a process that checks out all of the files when I start RoboHelp and, when I close the project, the process saves all changed files back to SharePoint.
I started a project this week updating existing WebHelp; my co-worker told me to go to SharePoint and copy the foo.xpj and foo.hhc files from SharePoint to a folder on my local hard drive. I did this and I was told to double-click the xpj file to start RH. All of the other files downloaded from SharePoint to my local drive. I did some work and closed the project. The files that I changed were saved back to SharePoint. Then, when I started RH again, I got this error msg immediately after I clicked on the project link under Recent Projects:
"An error occurred while trying to save data to <C:\foo\foohelp\root.fpj> <5>."
I click OK and all the files download successfully from the SharePoint repository and RH displays the project. My co-worker and I are confused by the error msg. Why is RH trying to save data to root.fpj at the beginning of the RH start-up process?
TIA for any help.

Am I right in understanding your are trying to start a new project just by taking the XPJ and HHP files from an existing project? That's not a method I have seen suggested before and I wouldn't expect it to work.
I'm not clear as to the logic of doing it this way.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

An error occurred while trying to save data to rhbag.apj

Opening a RoboHelp 8 project in new RoboHelp 11 and receive the following error:
An error occurred while trying to save data to rhbag.apj...
I can see this file in the project but many of my baggage files (.pdfs) are missing and I am not able to add them back into the project. I select New Baggage file and select the file to add, however the file is not added and no other error is received.
Any assistance is greatly appreciated.

Is the file writable or set to read only?
Probably, the rhbag.apj got corrupted. If you open it up with notepad (or other text/xml editor), what do you see?

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

I can't use Photobooth - when I open the app, I get the message: "Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."
i tried adding user macintosh hd/users/your_user/pictures/"photo booth" but still photo booth is not working and even images in photo booth cant be deleted they keep coming back

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box markedAllow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Error when trying to save a fillable form?

Hi,
My staff is getting an error when trying to save information that was typed in a fillable form. They are able to print but cannot save. The error message they are getting is: "Cannot Save Form Information Please note: You cannot save a completed copy of this form on your computer. If you would like a copy for your records, please fill it in and print it." They have also gotten the message: "Save a Blank Copy of this Form Data typed into this form will not be saved. Adobe Reader can only save a blank copy of this form. Please print your completed form if you would like a copy for your records."
This form was created in LiveCycle ES4. I have Adobe XI on my computer and I am able to save the form fine. My staff has Adobe 9 on their computer. Is there anything I can do so that they will be able to save the form on their computer once they have finished filling it out?

Gilad D (try67) wrote:
Mac users can fill in LCD forms just fine, they just can't create them.
And you can fill in and save an LCD form in Reader, if it has the appropriate rights applied to it in Acrobat before-hand.
I thought The latest Reader XI (regardless of Platform) had the ability Print and save with or, without reader rights. That what I've been reading on this forum ever since reader XI came out.

Error while trying to save layout:Console layout (Access is denied)

Got an error while trying to save changes made in the layout,
The error message is
1) 'Preference.properties' (Access is denied), In the details button 'java.io.FileNotFoundException...'
2) and on continuing futher, another message displayed is - 'Error while trying to save layout:Console layout (Access is denied)
There is no Oracle Error Number associated with this message. It is a Oracle Warehouse Builder Error
I have checked that
1) this file exist in owb home/owb/bin/admin/Preference.properties
2) It is not read only
3) tried to set a parameter REPOS_DB_VERSION_ALLOWED=Oracle 10g
as specified in the Installation and Admin Guide
Please can you help?

Also, not that you shouldn't get to the bottom of this, but you should be aware that any of your development or mapping changes are likely still being saved to the respository.
In other words, you could continue working and just ignore these errors. We ran into this situation (it was indeed simply file permissions on the owb directories), but we noticed right away that at least our actual OWB work was in fact still being committed to the respository every time.

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi ‏130 KB

other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

Error while trying to save a crystal report via the Add-ins

Hi All,
I'm getting an error while trying to save the crystal report after I have opened it from the SAP.
When I'm trying to save the report via the Add-ins I'm getting the next error :
Unknown error accured failed to get the internal key of the current user.
Thanks for your help,
Eyal

Hi Eyal,
Even though you posted your 1st message couple of month ago, I would still say welcome you to post on the forum.
What is your B1 version and PL?
Thanks,
Gordon

Error when trying to save a file

I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format.
I also tried opening another file copy and pasting under a different name and it doesn't help.
Please Help.
Bruce

Hi,
Please try the following methods:
Using Administrative Template files and the Office Customization Tool to disable the restriction
Use a trusted location, or create an exempt location
Quote from:
http://support.microsoft.com/kb/922849/en-us
Regards,
George Zhao
TechNet Community Support

HT4864 I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

I am using Entourage and followed all the instructions above and still getting IMAP Server error. Error msg:Security failure. Data decryption error.

'System Error' when trying to save Form Manager Registry Settings

Hi,
trying to save changes made in the form manager registry settings [Home > Services > Adobe LiveCycle Form Manager > Registry Settings (http://localhost:8080/FormManagerAdmin/registry-cfg-load)], I get an error, which reads:
> System Error
>
The request could not be processed. Please retry the operation. If the problem persists, please contact your system administrator.
Has anyone had this error as well?
The system runs fine apart from the jboss log files being crammed with the well-known and pretty annoying
SpyJMSException.
Does anyone have an idea how to apply changes to the form manager registry settings, if the web ui does not work? Where are the 'form manager registry settings' being stored? Maybe I succeed in changing the settings manually at least without having to re-install Livecycle...
Regards,
Steve

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

Error when trying to save/apply in OAM Console (credential store / wallet)

So our Admin WLS had accidentally been started as root previously, so we restarted as oracle (after chown -R oracle:oinstall all files), and the Admin Server starts up ok. However, when attempting to save/apply a change within the OAM console, we receive the following error:
Error in creating the credential store (wallet) : JPS-01047: Cannot persist the wallet. Reason java.io.IOException: java.io.FileNotFoundException: /tmp/pki_data1951273487.lck.tmp (Permission denied).
And in the log files this also appears:
<Mar 29, 2013 2:27:01 PM CDT> <Warning> <oracle.jps.idmgmt> <JPS-01520> <Cannot initialize identity store.>
java.lang.RuntimeException: java.security.PrivilegedActionException: oracle.security.jps.service.idstore.IdentityStoreException: JP-01520: Cannot initialize identity store.
Any help would be greatly appreciated!
Thanks,
Chris
Edited by: ch**** on Mar 29, 2013 12:29 PM

We are using JBoss 3.2.5.
Weirdly, last week a collegue of mine was able to save the registry changes. This week, both of us get the 'System error' when trying to save changes. Even using a default Administrator account, we were unable to save changes.
Is there any other way apart from the LiveCycle web UI to change the registry settings without having to re-install the server? Where are these values stored?

ORA-01552 Error when trying to import data

I get the following error when trying to import data into my database. My version is as follows:
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Solaris: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
and I get the following error:
ORA-01552: cannot use system rollback segment for non-system tablespace
Any help would be appreciated.
Also when I upgraded my database I received the following error message but continued without fixing:
Warnings Ignored: Your database is using US7ASCII as the NCHAR type. In Oracle9i, the NCHAR datatypes (NCHAR, NVARCHAR2, and NCLOB) are limited to the Unicode character set encoding (UTF8 AND AL16UTF16) only. Refer to the Oracle 9i Database Upgrade Guide to change NCHAR columns in user tables to one of the supported types.
Can I fix this via an sql statement or what?

Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards.

Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time."

My macbook pro say this message when i open photo booth. Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time." any one help me please

My macbook pro say this message when i open photo booth. Photo Booth couldn't save your photos - Photo Both encountered an error when trying to save your photos. You photos cannot be saved at this time." any one help me please

How do I fix this? Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.

Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.
How do i fix this?

I had the same issue, as suggested by others on similar question I checked my permissions and they were fine.
This worked for me
1) First saved the photos from my current Photo Booth library
2) Deleted the photo booth library folder
3) Created a new admin user
4) Copy the photo booth library from the new user and paste it in your user (where the previous photo booth library was)
5) You can then delete the new user you created.
*this is my first attempt here, so my bad if its not up to scratch*

Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.

Photo Booth encountered an error when trying to save your photos. Your photos cannot be saved at this time.
prev suggestion was to remove file: com.apple.PhotoBooth.plist.
still not working and I Am running;
OS X version 10.9.1

I had the same issue, as suggested by others on similar question I checked my permissions and they were fine.
This worked for me
1) First saved the photos from my current Photo Booth library
2) Deleted the photo booth library folder
3) Created a new admin user
4) Copy the photo booth library from the new user and paste it in your user (where the previous photo booth library was)
5) You can then delete the new user you created.
*this is my first attempt here, so my bad if its not up to scratch*

RoboHelp 10 - error msg - " ... trying to save data to root.fpj"

Similar Messages

Maybe you are looking for