Robohelp 11 not Linking or Importing .docx or docm

I just got RoboHelp 11 installed. I specifically upgraded to allow me to link my many Microsoft Word 2007 and Microsoft Word 2010 since RoboHelp 8 will not allow you to .docx files. When I try to link there Word docs, it only shows me options for .doc and .rtf files (as shown below). I have the Microsoft Office 2010 suite installed and usable on my computer. As the tutorials state:
You can create a RoboHelp project by importing a Word document. To import Word files, you must have Microsoft
Word installed on your computer.
Note: DOCX and DOCM formats are not supported by versions earlier than Microsoft Word 2007. See Microsoft Word
I was able to create a new project using a .docx file, but even that project once created shows this same window without the .docx and .docm options when linking or importing new Word Documents.
Is there a setting or an update that is needed to allow me to select .docx file types for Linking and Importing?

When you go to open a document in an existing project as in your first image your dialog is only showing DOC and RTF whereas in the second image all the required options are showing. So the question has to be what is different and one possibility is that in the first you are browsing to a network and in the second you are browsing locally.
Try copying the document you were trying to link to / import to your local drive and then try to link. Are the options then different? If yes, I would suggest a chat with your network guys.
Let us know how that goes.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Audio Tracks are not linked when imported

I know I recorded in stereo so I don't understand why the audio pair I imported are not linked(2 mono tracks) in the timeline. Anyone know how to fix this?
Adam

There is no panning in stereo pairs. That's the way it works. You can't have separately panned tracks and still have them be stereo pairs. FCP works the same in this regard. If you captured in FCP as a stereo pair, the panning would be as you see it in FCE.

InDesign CS5.5 won't import docx/Word2010 with linked images.

Hi,
Maybe somebody knows what is going out
I have WORD 2010 document with LINKED MathType equations saved as EPS files.
In WORD 2010 they are LINKED or LINKED AND EMBEDED - but when I try to import this DOCX file into InDesign CS5.5 - images are missing.
Only EMBEDED images are imported/visible - but of course not linked.
I hope somebody can tell me if this is WORD or InDesign problem and how to fix this.
DOC file saved from WORD 2000 - imports perfectly fine - all EPS equations linked in WORD are perfectly visible and still linked in InDesign CS 5.5.
thx

Peter Spier wrote:
Hi Robert, we haven't seen you here for a while. Welcome back.
Thx
I know Jongware complains bitterly that Word import can be really flakey. Did you try daving as plain .doc, too? Seems like MathType equations are also the subject of a fair number of posts, too, but I'm not sure they are really a similar problem. I don't suppose there's any way for you to convert the eqations to .ai or PDF and still use them as links in Word, or to embed rather than link?
I'm working on big tool to automatic mass processing big number of Word files. One of the steps is to prepare Word files with MathType equations for further manual processing. I have a macro (for Word2010) to automatically export all equations to EPS files. The next step is to reImport EPS files back to Word - so they will be imported into InDesign as linked files and then they could be automatically correctly positioned withing the text.
The problem is - I've done reImport step in Word2000 - as 2nd macro - and it works perfectly fine for DOC files saved from Word2000.
Of course I can do this in InDesign - but I think it would be faster in Word.
I think missing import of the linked files for DOCX files is a BIG bug ...

Why is RoboHelp not displaying the required data content of .chm when linked as Help in my App ?

Gorgeous Hello All,
Has anyone encountered the below-said show- stopper. Another BIG TIME help required, will help me in tremendous fashion.
Am using Adobe RoboHelp, Version 10 and IE version being 10.
In my local machine :
1.)I have completed my technical writing courtesy Design editor
2.)Generating chm File : View -> Pods –> Single Source Layouts -> Right Click on Microsoft HTML Help -> Tagged Set as Primary Layout
3.)Generating Primary Layout : File -> Generate -> Primary Layout (Microsoft HTML Help)…
4.)Viewing Primary Layout : File -> View -> Primary Layout
Everything works FANTASTICALLY till here with the required output (as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary and with the data contents)
Show Stopper, At my Application Server :
5.)I copy the entire robohelp project folder from my local machine to my application Server path
6.)My Application has been developed in ASP .NET, Version 4.0.
7.)Help link has been created in this application wherein here the file name of < >.chm has been linked in the code to be read from the Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\
8.)I login into my above-said application -> click on the Help page -> Displays the required structure /buttons as Hide, Back, Refresh, Home, Print, Options, Contents, Index, Search, Glossary
a.)Clicking on any of the Books or Topics appearing beneath Contents : The System prompts out with error cautionary message called “ Navigation to the webpage was cancelled. What you can try: Retype the address ”
*** This is a huge SHOW-STOPPER. I spent plenty of hours on this, but unable to deciper with a solution at all) ***
( Note : Am able to directly open and read the required data contents by Clicking on any of the Books or Topics appearing beneath Contents from Server’s RoboHelp project folder\!SSL!\ Microsoft_HTML_Help\ < >.chm )
Why is the RoboHelp not displaying the required data contents of <>.chm when linked as Help in my Application ?
Cheese – Vipin Nambiar

If you looked at the error message and searched the forum, you should find the answer as this is a problem that started in 2005. You should not run CHM files from a server and cannot without editing the users registry. See the page below.
http://www.grainge.org/pages/authoring/chm_mspatch/896358.htm
All along your questions have been based on webhelp, why suddenly are we going go CHMs.
See Snippets on my site for the correct form of help to use in different scenarios.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

RoboHELP 6 Crashes When Importing Word 2003 File

Discovered this today by accident (after modifying a Word
2003 file that I was previously able to import to "test" Help files
using both RH HTML and RH for Word (both V6) and thought I'd report
it because it appears to be a bug:
If you select the following option in the Word file that you
are importing, RoboHelp will crash during the import:
Tools, Options, General tab, Web Options, Files tab,
Organize supporting files in a folder
When you do the Import Word file action from RoboHelp, it
starts the import then issues a Microsoft C++ Debug Library message
box that says:
Debug Error!
Program: C:\Program Files\Adobe\RoboHelp
6.0\RoboHTML\RoboHTML.exe
abnormal program termination
(Press Retry to debug the application)
Abort Retry Ignore
Doesn't matter what you select. RoboHELP crashes and the Word
file is not imported.
Wanted to report this here in case someone else runs into
this. It cost me a lot of time today.
KC

Hi Peter
Thank you for the suggestion. I created a new project, new
folders, imported the files a few at a time & compiled it each
time (with one build tag in it) and found that only two files made
it crash. On the one file, I removed the tables (which had no
merged cells) from the project and it worked. The other file was
removed completly and I will re-do that page.
I then opened my current project (with all links &
pictures etc TOC working) and imported the changed file and removed
the other file and wala....I have a useable project.
The project was on our own software so unfortunately I would
not be able to share it.
Being a relativley new (1.5 yrs) user, I find running into
bugs are brutal....Thanks for all your help.

How to update link and import data of relocated incx file into inca file?

Subject : how to update link and import data of relocated incx file into inca file.? The incx file was originally part of the inca file and it has been relocated. ------------------- Hello All, I am working on InDesignCS2 and InCopyCS2. From indesign I am creating an assignment file as well as incopy files.(.inca and .incx file created through exporing). Now indesign hardcodes the path of the incx files in inca file.So if I put the incx files in different folder then after opening the inca file in InCopy , I am getting the alert stating that " The document doesn't consists of any incopy story" and all the linked story will flag a red question mark icon. So I tried to recreate and update the links. Below is my code for that //code start***************************** //creating kDataLinkHelperBoss InterfacePtr<IDataLinkHelper> dataLinkHelper(static_cast<IDataLinkHelper*> (CreateObject2<IDataLinkHelper>(kDataLinkHelperBoss))); /** The newFileToBeLinkedPath is the path of the incx file which is relocated. And it was previously part of the inca file. eg. earlier it was c:\\test.incx now it is d:\\test.incx */ IDFile newIDFileToBeLinked(newFileToBeLinkedPath); //create the datelink IDataLink * dlk = dataLinkHelper->CreateDataLink(newIDFileToBeLinked); NameInfo name; PMString type; uint32 fileType; dlk->GetNameInfo(&name,&type,&fileType); //relink the story InterfacePtr<ICommand> relinkCmd(CmdUtils::CreateCommand(kRestoreLinkCmdBoss)); InterfacePtr<IRestoreLinkCmdData> relinkCmdData(relinkCmd, IID_IRESTORELINKCMDDATA); relinkCmdData->Set(database, dataLinkUID, &name, &type, fileType, IDataLink::kLinkNormal); ErrorCode err = CmdUtils::ProcessCommand(relinkCmd); //Update the link now InterfacePtr<IUpdateLink> updateLink(dataLinkHelper, UseDefaultIID()); UID newLinkUID; err = updateLink->DoUpdateLink(dl, &newLinkUID, kFullUI); //code end********************* I am able to create the proper link.But the data which is there in the incx file is not getting imported in the linked story.But if I modify the newlinked story from the inca file,the incx file will be getting update.(all its previous content will be deleted.) I tried using Utils<IInCopyWorkflow>()->ImportStory() ,But its import the incx file in xml format. What is the solution of this then? Kindly help me as I am terribly stuck since last few days. Thanks and Regards, Yopangjo

>
I can say that anybody with
no experience could easily do an export/import in
MSSQLServer 2000.
Anybody with no experience should not mess up my Oracle Databases !

Class not found in import

I am new to the Java technology and am running into some problems getting started. Initially, I was getting the following error: Class javax.swing.JOptionPane not found in import. After realizing that I needed to unzip the src.zip file, I did so. I tried compiling again and got the same message. I came across a website that talked about setting the CLASSPATH. So I set the class path like so: set CLASSPATH=.;C:\;c:\j2sdk1.4.2_04\src;. Finally! I got passed the first error. However, what followed was quite depressing. 50 Errors! Looks like the compiler can not find any class I import that starts with "sun.". I looked where I can see the javax folder and there is no sun folder. Did I miss something in the installation? Is there a workaround for this? I thought I read somewhere that you shouldn't import sun.* classes, but what happens when it is in the delivered packages? TIA Ryan

Well to start off... The file Src.zip only contains source files nothing compiled so it useless unless you want to look at the source code, the Java Class files are in a "Jar" file...
Set your (system) path to c:\j2sdk1.4.2_04\bin
your ClassPath should only point to the new class files that you created...
( I don't even have the ClassPath set on my computer)
And this link deals with setting the classpath...
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/classpath.html
That should take care of it... Here are some links for you to check out...
The Java Tutorial
http://java.sun.com/docs/books/tutorial/index.html
Essentials of the Java Programming Language: A Hands-On Guide, Part 1 and 2
http://java.sun.com/developer/onlineTraining/Programming/BasicJava1/
http://java.sun.com/developer/onlineTraining/Programming/BasicJava2/
Language Essentials Short Course
http://java.sun.com/developer/onlineTraining/JavaIntro/contents.html
Tutorial Index
http://java.sun.com/developer/onlineTraining/index.html
- MaxxDmg...
- ' He who never sleeps... '

Email signature links not linking

Hello. After unsuccessfuly trying to import my signatures from my MBP running Mountain Lion to my new iMac running Mavericks, I tried to create new signatures from scratch. I followed the basic guidelines: created a dummy signature, edited it (using TextEdit) so that it looks all nice in HTML, and then attaching it to my account. When I send it to a test account, I see the hyperlinked text as blue, but it doesn't actually link to the URL - it's as if the href links are dead. Here's the signature doc:
Content-Transfer-Encoding: 7bit
Content-Type: text/html;
charset=us-ascii
Message-Id: <[email protected]>
Mime-Version: 1.0 (Mac OS X Mail 7.2 \(1874\))
 
 
 
Michael Borger 
Oahu Home Buyers, Inc. 
<a href=“http://www.oahuhomebuyers.com” target=“_blank”>oahuhomebuyers.com</a> 
We Buy Homes on Oahu, HI 
(808) 377-4379 
<a href=“http://facebook.com/oahuhomebuyers” target=“_blank”>Facebook</a> | <a href=“http://twitter.com/oahuhomebuyers” target=“_blank”>Twitter</a> | <a href=“http://plus.google.com/+Oahuhomebuyers808” target=“_blank”>Google+</a>
The signature looks correct when received -- the links just don't go anywhere, i.e. the browser isn't even called, although when the cursor goes over the text, the pointer changes to the hand. I tried locking the .mailsignature file as well as I've seen that advice in a few place, but no effect.

Wyodor,
1. It may be messy or it may not. It seems that is opinion as opposed to fact. I am not a designer. I am a guy who has iLife and so I have iWeb & a need. Mac makes it easy for those of us with no designer experience to feel we can do something. It may not be up to designer's standards but it's what we have.
2. Why two email addresses? One is direct link and the other is in case someone would rather copy & paste the address in case they are at another computer and do not wish to use the default email of the host computer. I don't know. It was a suggestion I took. Doesn't seem harmful to me...
3. Out of focus? Where? There are no options to focus anything and all it is is typed words. I cannot see how it is out of focus.
4. I have looked and looked again at these pages. Code means nothing to me. So all I can do is look at the page itself and try to figure things out. What is frustrating is that things look different depending on which computer and which browser I view them on. While working here on iWeb I see certain results but I don't have several computers and every browser available all the time. So how am I supposed to fix anything when it looks fine when I working on it? I just discovered yesterday while at a friend's house that on IE the site had two hit counters I cannot see on Camino, Safari or Firefox. I even thought I had removed the hit counters mostly because I couldn't see them when I put them on.
5. I have used a font that may not be recognized. But it is recognized on the other pages. My problem is mostly - but not entirely - with this page. All I see is that even where the pages are similar, they read differently. I have nothing blocking these links any more than I might on other pages and yet this one page will not link.
Thanks for your help, though. As I said, the code here is Greek to me. So I cannt use it or even recognize if its helpful...

Using Link to import Calendar & Contacts to Z10

How to import Outlook contacts and calendar appointments using BlackBerry Link 1.0.1 for Windows
(Taken from, and further details at: http://helpblog.blackberry.com/2013/03/blackberry-link-import-outlook/#more-6968)
User Guide - BlackBerry Link 1.0.1 for Windows
How to install or upgrade BlackBerry Link for Windows
If you have not installed BlackBerry Link yet, visit http://blackberry.com/blackberrylink and follow the instructions to download and install BlackBerry Link for Windows. If you have already installed BlackBerry Link, you will be automatically prompted to install BlackBerry Link for Windows v1.0.1.
Note: For those that use a Mac, stay tuned for more information in the near future.
Importing contacts and calendar data during device migration or during the new device setup wizard
If you are upgrading to a BlackBerry 10 smartphone, after installing BlackBerry Link you’ll be able to import your Outlook contacts and calendar appointments during the device migration process. If you are connecting a BlackBerry 10 smartphone to BlackBerry Link for the first time, you will also be able to import your contacts and appointments during the new device setup wizard.
When prompted, complete the following steps to import your Outlook contacts and calendar details to your new BlackBerry 10 smartphone:
1. On the Import Contacts and Calendar Appointments from Microsoft Outlook screen, click the Transfer Data button.
2. Select the Microsoft Outlook profile containing the data to be imported.
3. Use the checkboxes to select the data to be imported.
Calendar appointments occurring in the last 30 days or in the future will be imported to the BlackBerry 10 smartphone
4. Click Next.
Once you have imported your Outlook contacts and appointments, you can update your contacts at any time by following the instructions in the next section.
Importing Outlook Contacts and Calendar data from BlackBerry Link device settings
If you have already set up your BlackBerry 10 smartphone, complete the following steps to import your Outlook contacts and calendar details:
1. Open BlackBerry Link for Windows.
2. Connect your BlackBerry smartphone to the PC using a USB cable.
3. In BlackBerry Link, click on the name of your BlackBerry smartphone followed by clicking the gear icon in the top right corner to open the settings menu.
4. Click Import From Outlook.
Note: An upcoming release of BlackBerry Link will support full two-way synchronization.
Caution: A pop-up message may appear if you have previously imported data from Microsoft Outlook to your BlackBerry 10 smartphone using BlackBerry Link. Importing the data again will add new contacts and calendar appointments, but will not update any existing records that have been modified on the device.
5. On the Import Your Contacts and Calendar Appointments screen, select the data to import by clicking the Contacts and/or Calendar appointments checkboxes. Click Next followed by Ok to transfer your data.
6. On the Data Transfer Complete screen, click Finish.
7. Click Close Settings to return to the normal media and document view.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Note: An upcoming release of BlackBerry Link will support full two-way synchronization.
please to way sync now

Notes link to an email not possible?

If I create a note about an email, the note is not linked to that email? What's the point then? Doesn't that seem like an important link that should be attached? Note to email.
In Tiger I would flag emails. I hoped notes were the answer.
And I avoided MailTags too. Waiting for Leopard. I guess MailTags is something I may need then. Attached emails to key words or projects.
Come on Apple.

If I create a note about an email, the note is not linked to that email? What's the point then? Doesn't that seem like an important link that should be attached? Note to email.
In Tiger I would flag emails. I hoped notes were the answer.
And I avoided MailTags too. Waiting for Leopard. I guess MailTags is something I may need then. Attached emails to key words or projects.
Come on Apple.

Not able to import components into IR

Dear all,
I just installed ecc 6.0 in my home PC.
installationall went perfect and its working fine.
PROBLEM: I created a software Component in SLD.
but when i got to Integration Repository and try to Import from SLD in Tools its comming as " Unable to read software component versions from System Landscape Directory "sapserver:50100 "
I dont know what is causing this problem!
Please Help.
Edited by: senthilprakash selvaraj on Jan 14, 2008 4:35 PM

First your SWCV problem......
Make sure the service users are present and all the necessary roels are there ( i mean all the service users PI* if not there for time being create them)
Problem:
1)I checked the gateway host & gateway Service both were not correct as u told. i changed the gateway host to: <hostname> and gateway sevice to "sapgw01".
01 is this your instace number? sapgwXX ( XX is your instance number)
2) Now its telling as unregistered Program ID when i test the connections in for SAPSLDAPI and LCRSAPRFC.
you have to create the JCO connections in Visual amdin, for SAPSLDAPI and LCRSAPRFC
then this will get registred as PID
Please tell me how to give a registered Program ID.
note: I checked for registered Program ID in "smgw" i am not able to find any Program ID, or in sm37 or sm38.
( Ex XI RFC sender adapter will take the PID which you have mentieond in the adapter and tries to ping to the R/3 to look for the same PID to get the RFC dest name to retrive the data from there.....
This PID is not linked to any program or so only thing is the names of the PID in the rfc dest you create and RFC sender adaoter shhould be same.....
when R/3 sends the data to external system i mean non SAP it usess RFC concept, for that it usess the TCPIP port...now the abaer in his program will send the data to the TCPIP port you have created...data comes and stops here untill external program calls to this RFC dest....when you create the RFC dest to send data to External system (NON sap) the external system should know that RFC destnation...it will detect the RFC dest using the PID....when you create the RFC dest and regirsted server program...r/3 will sotre this information like PID and RFCdest name.....rfc sender adpter will look for that PID which youmentined and look for the same PID in the R/3 and then it will take the rfc dest name and retrive the data.....
the only conecpt of the PID is to able the 2 differnet system talk to each other using the common name....no program is required for this.....)
ANOTHER PROBLEM
1) I am using user id PISUPER for logging into IR ID and SLD
But when i try to login with PISUPER in SAPLOGON its saying "Name or USerID doesnot EXIST".
create it and check
2)I am able to login to SAPLOGON via userid sapuser
3)I went to tcode "su01" i tried to check the entry for "PISUPER"
its telling the username doesnot exist?
could this be creating the above mentioned probles in IR and SLD import.
i think your post configuration steps you need to check once more...check are you able to import all the BS from SLD in ID also?
for the IR i think the service user might be the issue

Not linked tot he Event

Hi friends,
I am facing a problem in triggering the event.
My problem is " When a form is created in the EP and when the SUBMIT button is clicked i am calling a RFC in which i am using the function module "SWE_EVENT_CREATE" where the exporting parameter are the business object 'YBUS1065' objectkey 'EMPPERNR' and the event 'POSITION CHANGED'.
Using this RFC call only my event is going to get triggered. I have done my worflow setting in "SWE2" and i execute the workflow but i cant see the even log in my "SWEL".
When i diagonis the workflow in "SWUD" it says that "NOT LINKED TO THE EVENT".
i dont know where i made the error. Please helpout it is very urgent issue.
regrds
Balaji

hi Gareth,
i send you the code what i written in the RFC, and give me some suggestions.
MY CODE
FUNCTION Z_WF_TRIGGER_SEVERANCE1.
""Local Interface:
*" IMPORTING
*" VALUE(EMPPERNR) TYPE RP50G-PERNR
TABLES ZSEVERANCE.
TYPES: BEGIN OF ITSEVERANCE,
 MANDT TYPE MANDT,
 EMPPERNR TYPE PERSNO,
 MESP TYPE ZNUMC,
 MEBC TYPE ZNUMC,
 OUTPLALEVEL TYPE ZNUMC,
 CSD TYPE ZCSD,
 COMMENTS TYPE ZCOMM,
 END OF ITSEVERANCE.
*DATA: SEVERANCE TYPE STANDARD TABLE OF ZSEVERANCE WITH HEADER LINE.
DATA : event type SWEDUMEVID-EVTID.
*DATA: EMPPERNR TYPE SWEINSTCOU-OBJKEY.
*SEVERANCE-MANDT = SY-MANDT.
*SEVERANCE-EMPPERNR = EMPPERNR.
*SEVERANCE-MESP = MESP.
*SEVERANCE-MEBC = MEBC.
*SEVERANCE-OUTPLALEVEL = OUTPLALEVEL.
*SEVERANCE-CSD = CSD.
*SEVERANCE-INITIATOR = SY-UNAME.
*SEVERANCE-COMMENTS = COMMENTS.
*APPEND SEVERANCE.
*MODIFY ZSEVERANCE FROM SEVERANCE.
CALL FUNCTION 'SWE_EVENT_CREATE'
 EXPORTING
 OBJTYPE = 'BUS1065'
 OBJKEY = 'EMPPERNR'
 EVENT = 'POSITIONCHANGED'
 CREATOR = ' '
 TAKE_WORKITEM_REQUESTER = ' '
 START_WITH_DELAY = ' '
 START_RECFB_SYNCHRON = ' '
 NO_COMMIT_FOR_QUEUE = ' '
 DEBUG_FLAG = ' '
 NO_LOGGING = ' '
 IDENT =
IMPORTING
 EVENT_ID =
TABLES
 EVENT_CONTAINER =
EXCEPTIONS
 OBJTYPE_NOT_FOUND = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT =
IMPORTING
RETURN =
commit work.
Regards
Balaji

Import user drive (Mac HD) not found / not available as import source

Hi,
the Mac internal HD ist not shown on import screen (no user drive shown!). Whenn I select 'choose other source' I can see the user drive but no
finder-structure an all!!! pictures appear for import (sorry if I don't use the
right words no nativ!)
pls tell me how to add screenshots to explain - thx

Hi,
thank you for this incredibly helpful advice.
The vanished folders are back in place. :-D
Great!
Am 16.05.2014 um 23:31 schrieb blokfluitist <[email protected]>:
import user drive (Mac HD) not found / not available as import source
created by blokfluitist in Photoshop Lightroom - View the full discussion
I just had the exact same problem ! And am delighted to say that it's fixed thanks to a friend who pointed me here... http://m.imore.com/how-unhide-your-users-directory-1093
I followed the instructions and my user drive has now been restored to the image source list... phew !!
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640708/ScreenShot2014-05-16at19.21.51.png
https://forums.adobe.com/servlet/JiveServlet/downloadImage/2-6385792-640715/277-605/ScreenShot2014-05-16at22.03.52.png
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6385792#6385792
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Need Help: Pics not linking with edits

Hope I can be clear here...
I changed the top folder - deleted it. Mistake on my part, learned my lesson. This made the corresponding pix in LR go red - LR can't find where the original files are. My LR edits are still there though if you click on "develop" on any of the red files.
Is there a way to link my work to the files? Where are the file changes stored? Can I override this mistake? When I reimport the files they do import but do not link up with my LR edits.
SO, my database is a long list of red files with no top level folder. Underneath that long list is another long list of active files with the top level folder but no LR edits. I need to sync my original files with the LR edits.
Two years of work! Need to fix this. Ack. I refuse to let this go. There must be a way to fix this.
Thanks,
Jessica

I think I may have a new insight. it's not so simple b/c a hard drive died and i had to relocate the images to another hard drive. the red folders, with the edits, is referencing a dead hard drive. the white folders, below it, which are all the same folders and pics, references the new active drive.
i think i need to know how to find the edits. to answer the other question, i did try to load the backups but it didn't work. i think they were too recent and were backups of the current drive.
what i think i need to do is find the old drive with the edits, but once i do, do i try to find the backups and then drag them to the new drive? i'm perplexed.
thoughts?
jessica

I am trying to import my bookmarks from IE and have read the instructions of how to do this, but the Import button under File is grayed out and will not let me import. Any ideas?

I am trying to import my bookmarks from IE and have read the instructions, but the Import button under File is grayed out and will not let me import. Any ideas?

* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
See [[Private Browsing]]

Robohelp 11 not Linking or Importing .docx or docm

Similar Messages

Maybe you are looking for