Robohelp 7 Web Admin

Hello,
I'm new to Robohelp 7 and I'm having a simply issue that I
can't seem to figure out. I'm running Robohelp 7 Server on Windows
XP Pro with IIS. The Robohelp 7 Server install was a success but
when I try to login to the web admin page, it asks for a username
and password.
During the installation of the Robohelp 7 Server, it never
give me the options of what username and password to configure.
Can anyone tell me how-to login to the web admin or tell me
where to change the values.
Another issue I'm having is in the Robohelp HTML editor. I'm
trying to connect to the server which is installed on the same
machine and it's giving me "Connection to Server Failed".
Can anyone tell me where to set the configuration or how to
connect to the server?
Thanks

No one have had this issue before? Please reply if you
do.

Similar Messages

Web admin pages

I'm wondering how I can find the ip addresses and if it is possible to deal with the web admin pages of the multiple routers,switches, and cable modem in my home network. I've got a cable modem plugged into a router which then goes to a switch as well as another wireless router. In the past I've been able to go to the web admin page for these devices but when they're all plugged in the only page I know of is my main router (192.168.2.1). I'd like to get to my modem and at least my other router.

Hi Spencer,
You can only get into them by directly connecting on most of them, but generally speaking, if you know the Brand/Model of these then you can look up the "Default" IPs online, like here...
http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/

SG 300 web admin interface does not display properly

Went to log into the web admin interface on my SG-300 today and I get this in both IE and Firefox:
I'm not able to login by typing user/password and just pressing enter. I've tried power-cycling the switch, and this didn't help, however, since the power cycle, the font-panel system LED has been blinking green. I seem to recall, though I can't locate the reference now, that this means the switch is running with factory settings, but that cannot be right because:
1. I had previously saved a new configuration on the switch, which it should be using now.
2. It is answering on the configured non-factory IP address -- just not rendering the web admin interface successfully.
I've had this unit for approximately a month. This is not the first issue I have had with this unit (see:
https://supportforums.cisco.com/message/3486734) and I'm experiencing some strange LAN speed issues since I installed it. Do I need to RMA this thing?

Hi Lamont
There was a issue and work around for a issue with IE in the release notes, it may be relevant to you.
http://www.cisco.com/en/US/docs/switches/lan/csbms/sf30x_sg30x/release_notes/Sx200-Sx300_R1.1.1.8.pdf
Problem: Some WEB GUI pages require full version compatibility of JRE, Browser and JRE-Browser applets. For XML compatibility reasons, MSXML DLL Version 6 is required for IE browser users.
Solution: For download and installation please refer the following link: www.microsoft.com/downloads/details.aspx?FamilyID=993C0BCF-3BCF-4009-
BE21-27E85E1857B1&displaylang=en
This may or may not be relevant to you. I would like to think that you are using 1.1.1.8 ?
If you really are experiencing some weird problems , why not get the product verified by the Good folk at the Small Business Support Center.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Regards Dave

Problem to get Web admin access on cisco ISE

Hi,
We are currently having problems to access via Web admin UI to cisco ISE. after we put the password, we get this message on screen:
authentication failed due to zero RBAC group.
The ISE version that we are using is: 1.1.2.145 path 3
Do you have any idea about that?
Thank you for your attention on this matter.
Regards.

In Cisco ISE, RBAC policies are simple access control policies that use RBAC concepts to manage admin access. These RBAC policies are formulated to grant permissions to a set of administrators that belong to one or more admin group(s) that restrict or enable access to perform various administrative functions using the user interface menus and admin group data elements. I think there is problem with your RBAC policy configuration. Please follow the below link for help.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html#wp1282656
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_man_identities.html#wp1283009

Unity Connection 8.5.1 ES 16 web admin account recovery

Hello,
I have a client with a Unity Connection 8.5.1 ES16 version and they lost access to the Unity Admin web page.
I tried the steps to recover the password but it is failing, and the account doesn't seem to exist anymore.. I did a SQL query I found on another post here and it did not list this account anymore in the nonsubscriber querry, I also tried the utils cuc reset password command on the account several times with several passwords that matched the password criteria and they always failed resetting the password.
So I found another post and it had other query to use nonsubscriber account and use that, I managed o log in to the unity admin page with account called "UnityConnection" but it saids "Not Authorized" for all functions.
How do I add rights to the UnityConnection user or create another web admin account from SSH/CLI? I'm thinking I need to engage TAC in the morning and have them gain root access to fix this up. I did find a few bug ids on this but the workarounds don't work either and those were for 7.1.x.
Thanks, Erick

I was hoping not to have a Nested ESXi setup, initially I started to setup my Lab machine as a Bare Metal ESXi host, the free ESXi vsphere client has a 6 Core Limit per CPU and I have 2 CPU's with 8 Core's each and was not happy to lose 2 Cores per CPU as a limitation, so I read up and tried ESXi 5.0 which really messed up things for me, after ESXi 5.0 install My system started to act up and would boot up and sit at a Blinking Cursor forever, spent a week researching and gave up when I tried installing 4.1 again only to find out 4.1 would work either ! sucked real bad and I guess I just decided to give Workstation a try, minor glitches, But I will give it a try and setup a nested ESXi within my workstation, I know it has something to do with the OVA template and the Hardware specs that Unity Connection looks for, crazy thing is Unity Connection Works right now, I just have to start Tomcat manually everytime I boot up my lab system. Will keep looking for answers will I try the nested setup - Thanks Matt

DI Job Schedules not starting (running) scheduled using DI Web Admin

I have DI Jobs that have job schedules that I created through DI Web Admin and have active schedules. I have some jobs that start to run at their schedule time while others have active schedules but do not start at their schedule time.
Edited by: Juan Jacome on Oct 26, 2010 8:56 PM

Im not sure but a lot of times corruption happens and hence its better you redo your scheduling.
Regards,
Den

Oracle XE production : web admin pages not localized

Hi,
I've just installed the production release (OracleXE latin1) on a french windows XP SP2. The product runs fine but the web admin pages and documentation are in english. The entries in the "start" menu are localized.
When I tested the last beta I noticed that the web admin pages were localized.
Is this an installation issue or a product issue ?
Thanks,
Jérôme

Hi Jérôme,
the announcement says:
Oracle Database 10g Express (Western European) Edition - Single-byte LATIN1 database for Western European language storage, with the Database Homepage user interface in English only.
Oracle Database 10g Express (Universal) Edition - Multi-byte Unicode database for all language deployment, with the Database Homepage user interface available in the following languages: Brazilian Portuguese, Chinese (Simplified and Traditional), English, French, German, Italian, Japanese, Korean and Spanish.
Thus you would need the Universal Edition for having a French user interface.
~Dietmar.

ISE 1.x Web Admin

I have a ISE 1.1 demo virtual appliance that we are testing. The web admin account has been locked. How can I reset it or add another admin user to login with? I have the CLI admin account but don't see a why to affect the web users.

You can also disable this feature here - http://www.cisco.com/en/US/docs/security/ise/1.1.1/user_guide/ise_man_identities.html#wp1113177
When you select the password policies this option to disable the age will be there.
Thanks,
Tarik Admani
*Please rate helpful posts*

Publish Reports in Web Admin Tasks is grayed out

Publish Reports in Web Admin Tasks is grayed out. How can we enable this?
Thanks,
Nirav

Hi Nilanjan,
I'm able to access it. I can see all options there but publish report option is disable.
Thanks,
Nirav
Edited by: NiravShah21 on Aug 11, 2011 3:07 PM

How to reload the WRT160N through the web admin interface?

I see no way to do this, which is strange. Is there a way to reset through the web admin page or did Cisco gaffe on this? Thanks!

Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on "Administration" tab and click on Factory Defaults subtab and select Restore All Settings, this should reset your router to Factory Defaults...
Also you have a reset button next to the power cable, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

The WRT160N's Web Admin Console Keeps Becoming Unaccessible

Hi all,
I just bought a WRT160N v2 Router to replace my WRT54G.
For some reason, after the router runs for a few hours or a day, the Web Admin Console becomes unaccesible to both wired and wireless computers in the network.
I set it up to work on https only, which always worked with WRT54G. And I don't think that is a problem.
It simply works and after a while it doesn't. Resetting the router solves the problem temporarily. It's like the router doesn't accept HTTP requests from anyone all of the sudden.
I disabled firewalls and everything else running on both the wired and wireless clients without success.
I can successfully ping the router IP (192.168.1.1) but pointing to https://192.168.1.1 has no success.

The same thing happened to me when I upgraded to build 11. Now both wired and wireless disconnects occur frequently instead only wireless occasionally. For most devices you can download and re-flash the previous firmware - but not with Linksys I guess. Because I was beyond the 30 days return limit, I ended up buying a cheap Netgear G router (the same as what the Linksys was replacing) which works flawlessly. I will keep the Linksys in hopes that future firmware (if they ever release any) will address these issues. The reason I got the N was faster in network speed and increased wireless range. When it was working, with the build 8, I did have have problems connecting both laptops at the maximum speed for N. I had to downgrade to the standard path.
I bought Linksys because of its affiliation with Cisco, but in hindsight I probably would have tried the Netgear N.
Again, I STILL cannot believe you cannot get the previous firmware version!

Web Admin error

In Web Admin, when I click on "Set AppSet parameters" or " Set Application parameters", it is giving me an error - "500 - INternal server error". There seems to be some setting that needs to be activated or some additional authorizations that I need - what/which are those?
I can access other links on that web page, eg: Manage Document Types, etc
It's just these two options that is giving me the internal server error.
I am in 7.5NW
Thanks.

Anand we also had similar issue. Our Basis guys founded out that Anti-Cross was corrupt causing the web issue.
Solution: Reinstalled Anti-cross
Searched in another thread for installing anti-cross -
Once you login to SWDC, go to software downloads -> installation and upgrades -> browse our download catalog -> SAP cryptographic software. Then download SAP BPC 5.1 or higher. This downloads a zip file. This file has the file you need.
Hope this helps.
Regards

Admin defined roles in Web Admin

Looking to setup admin helpdesk rights in Web Admin so they can just Remove or Block devices under Mobility on a per user basis.
All I can find in the documentation is setting up additional Web Admins in the configengine.xml file.
Is there a way to give the limited rights?
Thx
Christa

Correct, you can add other admins, but there are no Role based
administration functions at this time, though I believe it is on the Road
map...
>>> On 3/5/2014 at 2:16 PM, in message
<[email protected]>,
laurabuckley<[email protected]> wrote:
> Hi Christa,
>
> I stand to be corrected on this, but as far as I know, access to the Web
> Admin console is an all or nothing story.
>
> I don't think that you can do graded authentication/roles based admin.
>
> Cheers,

Set Application Parameters link not activate under Web Admin Tasks of Admin

In the " How to do currency translation..." paper, there is a statement as following:
"The currency conversion business rules tables can also be activated by going through the web
admin parameters where the following parameter is set to u201C1u201D.
FXTRANS 1
However after I login to BPC Admin consol, I notice that Set Application Parameters link not activate under Web Admin Tasks of Admin Consol.
Where should do this? Should I do it under Set AppSet Parameters?

DFW,
In the non-web Admin Console, you should also be able to accomplish the same thing by going to the application, clicking "Modify application", then "Change application type", then "Modify Application", then choosing the "Currency Conversion" application option.
In general, this is how business rules can be turned on without messing around in the application parameters, and should really be the preferred method unless you have done some kind of customization that an application modification will interfere with.
Ethan

WAP4410N - Problems logging in to web admin from Apple MAC

I recently installed a WAP4410N for a customer without any problem, but a few days later I received a call requesting assistance as the customer could not login to the web admin page.
The login screen was showing, but it wasn't acceptingthe username and password that I had set.
Today I visited customer to investigate.
I discovered that I could login without any problem using my Windows laptop, but that customer could not use any of their Apple MACs to login.
Apart from one Windows PC, all customer computers were Apple OS.
Customer could login using their Windows PC without any problem.
Can anyone advise a solution to this problem?
Thanks
Stephen Killen
www.premitel.com

Thanks Stephen
They were using Safari and Firefox does indeed work!
Thanks again for prompt response

Robohelp 7 Web Admin

Similar Messages

Maybe you are looking for