Robohelp 8: Child Project topics not displaying in the topic pane

Hi All:
I am working on a Robohelp 8 merged help with four child projects. The child project I added last (which appears as Child 2 on the ToC) displays fine in the ToC pane. However, none of the Child 2 topics display in the Topics pane.
When I investigated, I found that Child 2 had a few broken links. I fixed them but this has made no difference.
I have cleared the MergedHelp folder and recompiled a few times, but w/o any change. Child 1, 3 and 4 topics display in the topics pane, but not Child 2 topics.
Would appreciate any pointers.
Regards,
Sophie

Try deleting the child from the TOC and readding it. If that does not work, can you post an image of what you are seeing. You can do so via the camera toolbar icon.
Read the RoboColum(n) for a tips, tricks and musings on the Technical Communication Suite products.
Follow the RoboColum(n) on Twitter

Similar Messages

  • Aperture 3 project does not display any images in one Project

    This is a strange situation.  The bullets below outline the situation:
    The project does not display any images
    When I place the pointer over the project it shows there are 500+ images
    I have located the RAW images stored in my aperture library
    I can pull up the images using a smart folder and searching for photos taken on the event day
    This is happening only to one of my projects that I know of (weird!!)
    I have tried to 're-add' the image by both importing and dragging and dropping into the project, neither works
    I tried the following basics:
    Fixed permissions
    Rebuilt the database
    Tried to re-import the data, but when I have the 'don't import duplicates' these are not an option
    Found the images in my Aperture library
    I created another project and drug all of the images into that project
    Any idea how I can fix this?
    My fear is that if I delete the original project, the original master images will be deleted.

    The most common cause of this is some sort of stuff in the search box at the top of the browser that you don't expect to be there. Just clear it and all your images should show up.
    RB
    One note - if you drug your images from one project to another it moves them vs copies them unless you hold down the option key.

  • Custom playbar does not display in the list of available widgets

    I followed the steps described in the "Skins" page of the Captivate 5 help outlined here:
    http://help.adobe.com/en_US/captivate/cp/using/WSc1b83f70210cd101126156ac11c7f147d6b-8000. html
    Now my problem is, that my custom playbar is not displayed in the list of available playbars (neither in the Project->Skin Editor->Playbar nor in the list of widgets). If I just duplicate one of the existing playbar files in Gallery/Widgets/Playbars it's listed without problems.
    I use Flash CS5 to edit the playbar and tried to publish it as AS3 and AS2 - no success.
    Are there special settings I need to set in the publishing settings to get my playbar in the list? Anything else I'm missing?!
    Thanks,
    Peter

    Try putting the swf for the playbar in ...\Adobe Captivate 5\en_GB\Gallery\Playbars\AS3\

  • Image not displaying in the Task Sequence Wizard. SCCM2012

    This is my question, so I will post the link here.
    http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
    Bryan
    I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
    the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
    I then created the task sequence for this image
    to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

    So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
    For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
    start and will show you exactly what's going on.
    As for the title of this thread, we'll need a lot more info to help you there.
    Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
    Jason | http://blog.configmgrftw.com | @jasonsandys

  • Siebel Charts gets generated but does not display in the Web client

    Siebel Chart is getting generated in NetChart4.6\Server\root\projects\Siebel.chart folder. However does not display on the Web client
    There is either no error displayed on the front end...
    Also note that Charts is installed on Windows environment and Siebel Server is installed on Linux Server

    Dear User,
    Thanks for using Oracle communities.
    Does this happens in dedicated client as well?
    We would need to have traffic captured when you are actually executing actions. The tools like fiddler etc will help here to track the traffic.
    I would suggest you open SR with MOS since it will need some analysis on network trace like fiddler. You can refer this thread in SR as well, so that once issue gets resolved thread will get updated with solution which will benefit others.
    Best Regards,
    Chetan

  • Some applets is not displayed in the ie6 browser

    Dear all
    Pls hlp me in this issue
    Some applets is not displayed in the ie6 browser
    it is displayed after enabling the Java sun "Use Java 2v1.4.0 for applet "
    but some applets is displayed without enabling Java Sun
    Insted of JavaSun we use MicroSoft Vm
    how is this possible

    Hi,
    As Julien said you can install the SQL Studio and check for the table starting with M followed by a number with your rootnode name. Similarly for the child node also. If you see that the data is present please check if you have written a BIND method for your table, form in the either the INIT or the supply function.
    Regards,
    Narayani

  • Chinese characters are not displayed in the Firefox bookmarks

    Chinese characters are not displayed in the Firefox bookmarks. The name looks like e.g. "??????? ???? cn.nytimes.com"
    Chinese character of the site name is displayed ok in the head of the browser window and there is no problem reading chinese web content. I use Firefox Portable 11 /English from portableapps.com in Windows XP.
    I googled and got some tips:
    1) Set your browser to recognise Chinese language internet sites.
    Windows users: Under "Tools - Options" on your browser's menu-bar add Chinese to the languages list.
    - I did this.
    2) Set your browser's "Character Set" or "Encoding" to UTF-8 (sometimes also called Universal Alphabet or Unicode).
    Encoding settings can be changed under the "View" option in your browser's menu-bar.
    - It was already set to UTF-8.
    3) Windows users: If Chinese text still does not display correctly, East Asian language support may need to be enabled.
    - This has been done when I installed Windows.
    I still don't get any Chinese fonts in the bookmark names. I can edit the bookmark name with chinese characters and then save the bookmark, it works fine. But why does not Firefox recognize the characters when saving bookmarks? Help is appreciated.

    No I didn't change anything deep beneath the hood. My problem didn't apply to the URL, but to the name of the link or bookmark header or whatever you would like to call it. (When hitting Ctrl + D there is a Name field). I only got ???????? instead of chinese characters in the name. Also for e.g. www.cntv.cn ...but maybe all China is not in the whitelist either. ;-) But anyway, this was not the real problem for me.
    Apparently I was wrong as after a reboot of the computer it worked. The solution seemed to be to add Chinese to the language list. I don't know why it was not enough to restart Firefox?
    Now I only have problems to show chinese characters in the name field of my external link manager... But I guess it is not an issue for Mozilla.

  • END-OF-PAGE not displayed in the last page of the classical report.

    Hi all..
    The END-OF-PAGE is not displayed in the last page of the classical report.
    SY-LINCT value is 30.
    Lines displayed in the report per page is 24.
    [3 for TOP-OF-PAGE and 3 for END-OF-PAGE]
    My Internal table has 6942 records.
    It comes 289 pages with 24 records in a page and 290 th page with 6 records.
    The END-OF-PAGE is not coming for the 290 th page.
    Please help.
    Thank You.
    Karthi M R.

    There are multiple links in SDN on this subject; Please search,
    end-of-page

  • Problem with subtotal, and the total icon is not displayed at the toolbar

    Hi all,
    I'm currentlyhaving difficulties working with the subtotal and the grandtotal. I have the code in the right place like the sort table
      CLEAR k_sort.
      ADD 1 TO k_sort-spos.
      k_sort-fieldname = pv_fieldname.
      k_sort-up        = c_x.
      k_sort-subtot    = pv_subtot.
      APPEND k_sort TO i_sort.
    and the fieldcatalog
      CLEAR k_fieldcat.
      add 1 to k_fieldcat-col_pos.
      k_fieldcat-fieldname  = pv_fieldname.
      k_fieldcat-tabname    = c_tabname.
      k_fieldcat-seltext_l  = pv_seltext.
      k_fieldcat-outputlen  = pv_outputlen.
      k_fieldcat-datatype   = pv_datatype.
      k_fieldcat-do_sum     = pv_dosum.
      APPEND k_fieldcat TO i_fieldcat.
    but it didn't seems to show both the total and subtotal. Even the icon is not displayed at the ALV toolbar. The field which I need the total is a currency field. I even try other fields (interger fields) but with no luck. I'm using REUSE_ALV. Any help is greatly appreciated.

    hi,
    In field catalog for the particular column which you want to sum make that as 'X'.
    say
    WHEN'MATNR'.
    it_fcat-do_sum = 'X'.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                i_callback_program     = report_id
                i_grid_title           = ws_title
    *            i_callback_top_of_page = 'TOP-OF-PAGE'
                is_layout              = wa_layout
                it_fieldcat            = i_fieldcat[]
                it_sort                = i_sortcat
                i_save                 = 'A'
                it_events              = i_events
           TABLES
                t_outtab               = i_reportdata1
           EXCEPTIONS
                program_error          = 1
                OTHERS                 = 2.
      IF sy-subrc <> 0.
    This will enable.

  • Firefox will not display on the screen even though with Process Explorer I see Firefox.exe active but no CPU usage

    I use Firefox v10.0.2 as default browser on Dell XPS8300 e/w Intel Core i5 & Windows 7 Ultimate and Compaq Presario CQ57 e/w Intel Core i3 & Windows 7 Home. More frequently on the (about 90% of attempts) than the Dell (50% of attempts) Firefox will not display to the screen when I click on icon. When it happens I cannot display other programs. I specifically say display because I believe Firefox has started. To circumvent the problem I installed Process Explorer on both machines and start this program first then click on Firefox icon. When problem occurs I can see Firefox.exe process in Process list; some CPU consumed but, then, no CPU activity. If I click on Firefox icon again another process opens in Process list but with same response - some CPU consumed and then no CPU activity. If I have 2 processes running and kill the 1st process, the 2nd will display and everything from then on is normal. If I do not open a 2nd process but kill the 1st process then click on Firefox icon Firefox is displayed and everything from then on is normal. This problem has occurred since original installation on both new machines. I've updated video drivers in both machines.

    Ok, let's see if we can fix this and get it working for you!
    First, if you start Firefox in [[safe mode|safe mode]] (restart your computer first, then when you open Firefox, hold down the shift key) does it start up more reliably? This is usually caused by a faulty add-on. If it does help, then restart Firefox, go into the Firefox button, then add-ons, and disable your extensions one by one until you find the trouble maker.
    Also, try updating to Firefox 11, it has several bug fixes that might make life easier here.
    Just as a few basic troubleshooting steps to make sure we have all the bases covered,
    Run all Windows Updates, install all needed service packs, etc.
    Update all your plugins (Flash, Java, etc.): [http://www.mozilla.org/plugincheck/ http://www.mozilla.org/plugincheck/].
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]. This helps check that there are no viruses on your computer causing issues. you can uninstall this program after you clean off any infections.

  • The portlet name is not displayed in the portlet drop down list ?

    Hi,
    I use Sun Java System Portal Server 6 2005Q4 for windows 2000 server , use the following command to deployo portlet,
    I am not sure if I successfully deploy the portlet?
    pdeploy deploy -u amAdmin -w amadmin -p amadmin -d "cn=amldapuser,ou=DSAME Users,dc=icheng,dc=com" C:\Sun\PortalServer\tmp\portlet\portletsamples.war
    The message I got after execute the pdeploy command is =>
    Deploys the portlet war file and inserts the provider into display profile..
    OPTIONS
    --help Help message (false)
    -u --runasdn UID Bind DN (none)
    -w --password Password (none)
    -p --wc_password Password for WebContainer's Admin (none)
    -i --instance WebContainer's Instance into which the war file is to be deploye
    d (*)
    -d --dn LDAP DN of the target node (*)
    -g --global Global display profile (false)
    -r --rolesfile File containing the DSAME and portlet role mapping (*)
    -f --userinfofile File containing the user info mapping (*)
    -v --verbose Generate debug messages (false)
    -V --version Generate version information (false)
    -l --locale Locale information (en_US)
    OPERAND
    Specifies a path to the war location.
    Deploying to IWS
    Is this mean that successfully deploy the portlet ?
    After I deploy the portlet, I login to Access Manager, select the "service" from view, click the portal desktop,
    click "Manage Channels and Containers", click the "New Portlet Channel...", then click the portlet drop down list,
    the portlet name is not displayed in the portlet list.
    How can I make the portlet name displayed in the portlet drop down list ?
    Can someone help me ?
    Thanks!

    Hi
    According to your description, since this is SQL Server forum, as Olaf Helper’s post, could you get the correct result if you execute the following query in SQL Server Manager Studio (SSMS)?
    select UserName from aspnet_Users where UserId in(select FreindId from myFreinds where UserId in(select UserId from aspnet_Users where UserName = '<your typed name>'))
    If you cannot get the correct result in SSMS, I recommend to check the Transact-SQL statement. Apart from the error message, we also need to know the table structure, data, join relationships between tables for further analysis.
    However if there is no problem in SQL Server query, it will be an issue that regards ASP.NET and website deployment. I suggest you to post the question in the ASP.NET forums at
    http://forums.asp.net/ . It is appropriate and more experts will assist you.
    In addition, there is detail about listbox control in asp.net. You can review the following links:
    How to Bind/Load/Fill ListBox with Sql Server Database in asp.net：http://www.webcodeexpert.com/2013/07/how-to-bindloadfill-listbox-with-sql.html#.U5f75_6KCM9
    How to get multiple selected value in ListBox control - ASP.NET using C#:
    http://www.dotnetfox.com/articles/how-to-get-multiple-selected-value-in-listbox-control-Asp-Net-using-C-Sharp-1047.aspx
    Thanks
    Lydia Zhang

  • Video is not displaying in the latest shockwave

    After updating to the latest version of Shockwave, .flv videos are not displaying. The audio is there but no video.
    What is going on Adobe?

    I agree - I am seeing an area where I presume video should be playing but I only hear the sound.
    You won't find an Adobe representative or tech support here, just other users trying to help one another.
    I assume Raymond that you are the content developer? Have you tried isolating the issue into a minimal file that could be submitted to Adobe as a bug report? I would suggest doing so as a start on getting your issue addressed. If you're lucky, doing so will lead you to find a solution, or perhaps a work-around. Create a file that only plays a video. You said earlier:
    I use the Flash asset and call.import which ever video is needed.
    perhaps you could post some code, or a link to a demo file that reproduces your problem

  • Rate and accessable value is not displaying for the tax invoice output

    Hello All,
      Rate and accessable value is not displaying for the tax invoice output. Rest of all outputs for invoices shows Rate and accessable value.
    Scenerio is free of charge sales order (samples) removing the goods from pant so excise invoice has been created and also updated. but for tax invoice out put rate and access value is not displaying.
        Pricing procedure: In pricing procedure account keys have not been maintained because there is not gl account upadation during billing for free of charge delivery.
    Thanks & Regards,
    ramesh

    hi Gurpreet,
    You can add values to that transient column programatically,either by getiing the row from the iterator and then row.setAttribute('Column_name','Value');
    Or providing value to it in the SQL...

  • Images in wwv_flow_file_objects$  do not display in the shared components

    Recently I needed to re-create an APEX workspace. The schema was intact, so I just created a new APEX workspace mapped to that schema and re-imported my apps.
    All was well EXCEPT that the images and files (e.g. style sheets) previously uploaded to the database under the original workspace were missing. Looking at the wwv_flow_file_objects$ table I saw the images and files were present but their security ID did not match that of the new APEX workspace.
    I updated the security ID and the files and images now work BUT THEY DO NOT DISPLAY IN THE SHARED COMPONENT LISTINGS. My fear is that I'll try to upload an image or file by the same name and they'll stop working because there will then be two rows in wwv_flow_file_objects$ with the same file name and security ID.
    Does anyone know how to get these items to display properly in the shared component reports?

    If they were application-specific, you would need to ensure that the new flow_id value in the table matched that of the application to which the file should be associated. If not, that value should be zero.
    Scott

  • Leading zeros are not displaying in the excel

    Hi Experts,
    Leading zeros are not displaying in the excel
    Here is the situation:
    I have developed one report, which will create the file in Application server with TAB deleimeted. After that I am sending that file via email in the excel format using Email functionality FM.
    Normally our material numbers will start with zeros.
    But when I check the email excel file , leading zeros are not displaying.
    Even I checked the application server (AL11) file, zeros are there.
    I thought program FM was wrong and I tried it manually by downloading the file into excel. Eventhough it is suppressing zeros.
    Could you please advise, how to display leading zeros to the material number in excel file.
    Thanks in advance
    Raghu

    Application server file showing  zeros infront of the material number.
    1200#  0012401387# XXXXXXXX
    Once file created in app server, I am using one custom FM to send that output in excel format / txt format via email.
    when I send txt file via email, I am getting leading zeros. But when I send xls file via email, I am not getting zeros.
    I checked custom FUNCTION MODULE . No mistakes in that.
    ===
    Sudhir,
    As you said, I passed ( ' ) single quote infront of the material number. When I check the excel file, single quote also displaying like this '0000100.
    Application server file showing like below
    1200#  '0012401387# XXXXXXXX
    ===
    Could you please advise anyone how can we acheive this.
    Thanks

Maybe you are looking for