RoboHelp 9 and ActionScript?
Hello. I am still quite green when it comes to the in's and out's of RoboHelp, so please pardon me if my inquiry is out-of-place in any way...
I am working on a PC/Mac compatible AIRHelp project in RoboHelp 9, and was wondering if there are any issues with authoring/inserting Actionscript? Essentially what I am looking to do is add two ActionScript source code files... the first is to be added to the project source folder and defines a particular class... the second attempts to validate a function of said class. As these source files are part of a third party purchase, I wanted to verify that this class can be interfaced once the installed .air application is launched.
I thank you in advance for your time and information
Yes. It's called Technical Communication Suite upgrade
Sorry to be flippant. The whole point of TCS is that it adds the level of integration that you require but which is not available in the individual products.
The RoboColum(n)
@robocolumn
Colum McAndrew
Similar Messages
-
I want to dynamically change the tintColor of a movie clip,
named toolboxMC_bg based on the value of a php variable $style set
in s3.php. I'm using actionscript 3. Please help. I just don't know
how to get flash to get the value of $style. I have attached the
code I have so far. Thanks.I feel that the problem lies with the actionscript not
receiving the php variable. I have changed the php to read the
cookie value. Please help! I get no errors in the browser and I get
undefined in the output window. However I do expect to get
undefined because I don't expect that flash could read the cookie.
That part actually makes sense. I know that the color change area
of the code works because if I change the default value I see a
change in color. Flash just cannot read my variable for some
reason. When you view the php page in the browser it successfully
reads the cookie and shows (in this case the cookie is red)
flashstyle=red. I have attached the php and actionscript.
Thanks. -
Write to and read from TCP/IP address using Flash and Actionscript
Hi,
I'm a bit of a newbie with flash and Actionscript. I have been programming for a number of years now, but I have only been messing around with flash since CS4. I have CS5 now, and need a bit of help. I have a wireless device that I have made, I wish to make a flash program (potentially adapted to iPhone or Android) that sends and receives data (in the form of Word or Byte sized variables) from an IP address assigned to the device. Is this achievable?
Please help. Thank youbump
Please! anyone! HELP -
Code beautifier for MXML and ActionScript?
How do people reformat ugly code in FlexBuilder? I can eaisly
format my Java, JSP, and XML in the same Eclipse environment, but
why not MXML and ActionScript? I am very surprised this feature is
missing. It's quite common that I copy code snippets from somewhere
to FlexBuilder which are not well formatted.Hey guys, Be patient...
Don't forget the years of Java development that have advanced
Eclipse, not counting the 40 mil or so in prior development that
IBM donated when they ported and open sourced their Visual Age
product line. I used VA it back in 96 and it was slow and clunky,
and never would have sold against Borland's Java products.
I'm sure the decision was consciously made by Adobe product
management to get core feature functionality out and concentrate on
other stuff for the next release.
The FLEX team has done a great job and for some who have ever
been under their delivery schedule for the size of this
undertaking, many can appreciate how well they have done.
Also, considering that many eclipse plugins that are free are
worth what you pay for them (I have tested quite a few), the paltry
$700 bucks for FLEX and the fact that it has a great debugger and
profiler makes it worth it.
One final opinion, no matter what anyone says, software is
not free. You pay in time, learning curve, more time, and
sometimes, just plain old tail chasing!
I'm not really being critical, both of you have valid points,
just be patient, they'll get there. -
Looking for documentation regarding RoboHelp and VSS (SourceSafe)
We are considering using VSS (SourceSafe) as our source control for RoboHelp - has anyone had any success with
RoboHelp and this tool?The config.xml has a schema - see the config.xml for the location. There is not much documentation in it since it is generated.
Each of the elements is also accessible via a JMX MBean - there is a reference manual that describes the MBean values,
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/wlsmbeanref/core/index.html
You can use that to understand the config.xml elements - you will have to map from MBean name to element name - i.e. DomainMBean to domain (in config.xml) -
Our company uses RoboHelp with the
Across
Language Server for our help file localization. We have some
very large help projects (largest is approx 2800 topics) and are
experiencing a lot of overhead with the files in the Across system.
We generate the help file as a .CHM help file and then decompile it
and send the decompiled .htm files for translation and then
recompile them when we get them back.
Originally when we submitted our ~2800 .htm files for
localization, Across would crash while trying to import our files.
So the Across people built a custom merge tool to combine several
hundreds of topics together into a single file to get around this
problem. So now, translators work on translating 20 or so merged
files. These are then split into their respective .htm topics and
then sent back to me for recompilation as the target language help
file.
Now we're running into overhead problems where there's an
update to our help project. Rather than just sending them the .htm
topic. We have to find what merged file contains the topic and
merge those files together and then resubmit it. It's turning out
to be a lot of work.
I'm wondering if anyone else uses Across with RoboHelp and if
you have any best practices for improvements? Or if there's a
better authoring tool for localization in Across?Hi James. You are right to be weary. I don't know this site but I'd be very surprised if you end up getting RHS9 for the advetised price. I know that Adobe do offer academic licences at reduced cost but not that reduced. Sorry I can't be more help.
-
Differences between Robohelp and Robohelp Server
I am in the process of evaluatinf Robohelp. I have found out
there are 2 versions: Robohelp and Rohohelp Server. can someone
list the differences in these products or direct me to a
link/document where I can find this information?
Thanks in Advance
Rodman VeneyHi, Rodman
You may find this article in the Adobe Developer Center
helpful as well. It refers to RoboHelp Server 6, but virtually all
information remains relevant for v7. As Rick says, "Pro" is simply
the same as WebHelp or FlashHelp, but the content is published to
the RoboHelp Server so that you can get the benefit of user
feedback reports and the other features described here:
http://www.adobe.com/devnet/robohelp/articles/rhserver.html
Thanx
John -
Newbie questions on fms and actionscript 3
Ok, like I said I'm a newbie, but I do understand the differance between ssas and as3. Not all, but all most everything I see written in SSAS can be writen into a external AS3 file. This leads me to quite a few questions I'm hoping you kind people can shed some light on for me.
1) What is the advantage of writing a SSAS file over an external AS3 file?
2) Can I write an .asc file in AS3 or do I have to use AS1? Please understand I'm using tuts from fmsguru.com and the books "Learning Flash Media Server" (pdf) and "Programming Flash Communication Server". I'm not a javascript programmer so nothing I do in AS1 seems to make any sence while everything I do in AS3 does. It may not seem like it to you people that are programmers, but to those of us that aren't, AS1 and AS3 are miles apart.
3) kind of off topic, but a security question. I'm not a "hacker" and don't like the jerks that are. My question is on external AS / SSAS files and swf files. When my fla is compiled into a swf does my external AS files remain external? I assume they do, but then what is the threat of the swf being decompiled? In most projects I would do I could care less if somebody had access to my fla as long as they don't have my actionscript files.
I don't know. Maybe on questions one and two I'm getting confused becasue I'm using out dated material. Again I assume that even though fms was built off of the javascript engine it should be able to read and execute my AS3 file. Other wise what was the point of the evolution of actionscript into a fully functional programming language?
Thanks for any help you might have...1) I did not get this question correcly - for that matter SSAS can only be in AS1 - so i dont see reason comparing them
2) It has to be AS1
3) if you doing "include" stuff - i think code would go into compiled swf and proper decompiler would give you the code.
Last para - Server-side engine understands only AS1 so it wont be able to read and understand your AS3 file. -
I have been looking all over for a simple "hello world"
example, on how to connect to a database, and pass a param, and
return a dataset. I would like one that does not use components.
(Actionscript only). That uses ColdFusion 7.x and Flash 8. Can
anyone point me to one?Thanks Craig, I saw that example, but it was meant for Flash
MX, and according to the Flash 8 documentation, the NetServices is
now deprecated. Anyway, I posted my question on another site and
some supplied me with a simple example. Here is the url if anyone
is interested...
sample -
Flash CS4 and ActionScript 2.0
Hello
Was wondering if you could recommend the publish and save
settings in Flash CS4 when working with ActionScript 2.0.
What are my publish settings?
Flash Player 8 or 9?
Script: ActionScript 2.0
Should I be saving the project as CS4 or CS3?
- I no longer have the ability to save the file as Flash 8 in
CS4.
- It looks like I lose my XML files when I save as CS3
Are there any other settings that need to be changed?
Thanks in advance
Mtroika22,
> Was wondering if you could recommend the publish and
save
> settings in Flash CS4 when working with ActionScript
2.0.
Ultimately, it depends on what version of Flash Player
you're aiming
for.
> What are my publish settings?
> Flash Player 8 or 9?
> Script: ActionScript 2.0
There are numerous reasons you might decide to code a
project in AS2.
You might, for example, not yet have "taken the plunge" to
AS3, so you may
not be comfortable with it yet. Your project requirements
might dictate
that you support as low as Flash Player 6 (may ad agencies
have such
requirements). You might be updating an existing project,
already built in
AS2.
In any of these cases, your publish settings will be
determined by the
version of Flash Player you're targetting. Flash Player 8 was
the first to
support blend modes and filter effects (drop shadow, etc.),
so in order to
support that, you would have to publish to Flash Player 8. If
you don't
need those, and if your code itself doesn't rely on features
that require
Flash Player 7, you may as well publish to Flash Player 6 and
reach the
greatest number of potential viewers. (The farther back you
go, the more
likely your viewer will have Flash Player installed, because
not everyone
decides to upgrade. That said, most people seem to upgrade.)
> Should I be saving the project as CS4 or CS3?
If you're working with a team and some of those people use
Flash CS3,
you'll have to save it as CS3 any time you want to share the
file;
otherwise, save it as CS4. The FLA settings are independent
from the SWF
publish settings.
> - I no longer have the ability to save the file as Flash
8 in CS4.
Correct. Each edition of the IDE only save to the previous
edition, as
far as source files go. But each edition of the IDE is
capable of
*publishing* as far back as you like.
> - It looks like I lose my XML files when I save as CS3
Which XML files are those?
David Stiller
Co-author, Foundation Flash CS4 for Designers
http://tinyurl.com/dpsFoundationFlashCS4
"Luck is the residue of good design." -
Flex 4 Migration: skinning, and Actionscript
Hello,
I've been researching about this topic, but I wasn't able to find any examples on "how to skin in flex4" using actionscript. I'm trying to make a simple test, just load an image inside a container and set the borderSides properties. This property, and many others, are missing from flex 4 "by default", now I have to create/define a skin and code it using Line graphics components, is that correct?
anyways, my "real" (probably not the smartest but...) I've been struggling around this problem for a couple days:
- How do I migrate from Flex 3 (css styles and other stuff) to Flex 4 (skins), BUT I don't want to use mxml files, I'd like to keep everything written in actionscript in my application. It has to be feasible but I couldn't figure out how.
Thanks in advance
RenanThanks for the help, we managed to do a skin in actionscript.
Can you help me with two other issues, I'm still not comfortable with this Flex4 transition:
Is it possible to load/add an image to a group from the container (in actionscritpt), or you can only do that using skins?
Can I inherit skins like other classes? For instance: I have a skin to draw borders and another to draw an image, can I extend it to "merge" these two behaviors, border+image.
Thanks
renan -
Corrupted Frame files not importing correctly to RoboHelp and can't save MIF as FM
Hi,
I have Adobe Technical Communication Suite 3.0, which has FrameMaker 10.0.2.249 in it.
I created a user guide in FrameMaker, some of the chapters for which I imported from Word, and little bits of text here and there of which I copied and pasted from Word.
a) When I created a RoboHelp project and imported the Frame files, a little bit of content disappeared. A sentence here, a bulleted item there, not all the content I copied and pasted.
b) I thought I would save the Frame files as .MIF and then reopen them in Frame to get rid of any corruption. They saved as .MIF just fine and they open again with Frame just fine. However, when I try to Save As .FM, I get the message that .MIF cannot be saved as .FM.
I checked the extension in the Save As box and it has no mention of .MIF.
What to do? Any suggestions either for a) or b)?This is a bug in the Save As dialog. If the filename is yourfile.FM, you
can choose MIF as the filetype in the Save as Type box, FrameMaker
changes the filename to yourfile.mif and saves as mif.
But, for some reason, if you have a filename of yourfile.MIF and choose
FM in the Save as Type dialog box, you get that error message and the
save doesn't happen. The workaround is to delete the MIF extension in
the filename. Then the save works fine and the file is renamed with an
FM extension.
In other words, saving FM to MIF works as expected. FrameMaker renames
the file extension and saves in the new format. But, in a MIF to FM
save, FrameMaker refused to rename the MIF extension. (Maybe there is a
reason for this?) You have to delete the extension or the save won't happen.
I'm going to report this as a bug.
Mike Wickham -
How to Build a Preloader for Flash CS4 and Actionscript 3.0
With the wonderful help of many people on this site, I have successfully buit a nice website using Flash CS4. I am wanting to deploy the site this weekend and I'm working on the finishing touches. I would like to add a preloader so that the viewer will have everything loaded when the action starts. Can anyone suggest a good tutorial that shows how to make the simple "rotary lines" that are so popular? I've seen these and they look to be about an inch across and move like the hands of a clock. I think it may even say "Loading..." or similar. Since I'm still learning quite a bit, I did not know if Flash actually offers some "preloaded" tools for stuff like this? Or am I better off going to Lynda.com and taking a tutorial? Thanks for the help!
Dark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!
-
Using web services with flash cs3 and actionscript 3.0
Hi,
I want to use web services under flash cs 3 and by using as
3.0.
It was possible with as 2.0 to do it easily thanks to the
webservice Connector.
But I can't find how to use web services under flash and as
3.0.
I thought web services took part of the many improvements
flash cs 3.0 contain, but obviously it does not:(
Can anybody help me to use webservices with flash cs 3 and as
3.0?
Thanks in advance,
PascalDark Armor, You mentioned the book Adobe Flash CS4 Professional Classroom in a Book, which I have. I could not find anything in there. Did you mean to say Actionscript 3.0 for Adobe Flash CS4 Professional? I do have that book and it looks like there is information there. Just wanting to make sure that you meant what you said. Thanks!
-
The future of Flash and Actionscript 3.0, need your advise
Hello friends, currently I'm learning Actionscript 3.0, but have been reading a lot about Adobe disscontinuing Flash in the near future in support of HTML 5. Now, what I want to know is this: should I continue my education in AS3.0, or am I wasting my time?
If I am wasting my time, what language should I learn that will give me the ability to make robust websites? Java???
And is the "Flash" program gonna be completely obsolete? I'm somewhat confused on this subject and want to work effeciently.
Please, need advise from someone who really knows, so that I can continue my education in the right path.
Recommendations to links, books, videos would be greatly appreciated that you might think can help me in this matter.
Thank you friends:)You should list all of the sources you're indicating you have been reading so that anyone can have a better idea of the potential validity of what you say you are reading.
As far as AS3 goes, you should continue your studies... there is a future despite the fact that AS3 will probably be replaced with AS4 and on as time go by. And if web design is in your future you should follow on with learning all you can relevant to html5/javascript/css so that you have the skills needed for those as well.
Here's s link to something from the folks who know better than anyone that might help you get a flavor of the plans with respect to Flash/AS3+...
http://www.adobe.com/devnet/flashplatform/whitepapers/roadmap.html
Maybe you are looking for
-
How to generate a mail into the SAP Inbox
Hi everyone, I have an MM Workflow that is starting correctly and a mail is supposed to be generated in the user Inbox in SAP after the completion of a material enhancement but it does not. The Workflow was copied from another system and it was worki
-
After data migration from MBP (early 2007) to current MBP (late 2013) I have 3 versions of iMovie. v8,v9, and v10.2. Should I keep all three? I don't use it very often, but from other threads it seems people prefer the earlier versions. Should
-
ITunes voucher for some songs but want to purchase an album
I have a voucher for 3 songs and now I want to purchase an album. Is the price of 3 songs (0.99*3) just deducted from the album or won't work that at all and I can only buy single songs when I've got 3 songs for free? Any experiences with that?
-
I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?
-
Safari 5 crashes when leaving a java enabled chat room
I have went to the same chat room for years but and not had any problems but since the Safari 5 update, when I exit the chat room Safari always crashes and brings up the error report screen. the address for the chat room is: http://chat.parachat.com/