Robohelp 9 and PointSec Security

Recently PointSec was installed on my computer at work. After its installation, I opened one of our largest projects that is using the resource manager to link images and snippets. There are about 400 images and nearly 1000 snippets in the project. Prior to the installation, Robohelp would sync this project in about 3-4 minutes. After the installation, I tried to sync the project with the resource manager and it would not sync. It sat for nearly 30 minutes, and then Robohelp crashed.
Has anyone else encountered a problem where Robohelp didn't sync the project? I tried re-installing Robohelp, but that didn't work. I even got a new computer (has PointSec installed), but it also refuses to sync. Any suggestions?
Thanks.

Aside from the shared content not syncing, are there any other operational issues?
Is the project on your local C drive?
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7, 8 or 9 within the day!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Similar Messages

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Can anyone help me answer whether Robohelp has a secure ftp (sftp) or secure http connection protocols? it only lists ftp or http, but not specifying if secure? Thanks.

Hello again
First off, sorry for confusing anyone with the WYSIWYG reference. Failed attempt at humor. Ah, live and learn.
Can you expound on what you mean when you say: But there does seem to be “disagreement” regarding whether RH supports HTTPS?
If you are only referring to this thread, are you sensing "disagreement" because Willam said you can serve content to users?
Here's the deal. I sort of "read between the lines" with your post and made an assumption and it seems I may have needed to ask you to clarify before tossing an answer out. The assumption I made was based on your statement of: it only lists ftp or http
That made me believe you were referring to the Publish section in the Single Source Layout properties. (shown below)
This dialog allows you to specify a protocol used to UPLOAD your generated content to a server.
What Willam was referring to was the END USERS viewing the content AFTER it has been uploaded.
Cheers... Rick

Hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works

hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express

I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen.

My ipod wont let me buy apps etc... keeps saying this is the first time this device has been used and to sign in and answer security questions. I have had this account for years but cant remember the answer to the security questions. How can i fix it?

My iPod touch wont let me buy anything, i've beem using this account for a couple of years and now it says that this is the first ime this id has been used on my device... it's not.... and to sign in and answer security questions. i cant remember the answers to the questions. How can i fix this without making a new account and losing all my stuff???

From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I have forgotten my Apple ID and my security question. How can I change it. When I try to verify it through email it never goes through...

I've forgotten my Apple ID and my security question. I've tried to receive the Apple ID through email but I never receive the email.

The Best Alternatives for Security Questions and Rescue Mail
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contact Apple support.
    c. Rescue email address and how to reset Apple ID security questions.

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

Secure and non-secure access to the web application in one war

Say we have one web application (in one war) which includes JSP, servlets and the security intercepter. There is one business requirement to have most of the JSP(s) accessed via HTTPS, but a few JSP(S) accessed via HTTP.
My questions are:
a. Is this possible, or a reasonable requirement or a good practice?
b. if yes, what can we do to make it happen in the security intercepter implementation?
c. If not, what is the technical reasons?
Thanks much.

a) Yes its is reasonable and good practive, there is an overhead using https, so you should only encrypt file you need to. When you use an online store, only account details / payments are https, the shop itself is http
b) I dont really understand your difficulty. You can define a folder as 'secure' and put all your secure pages in this folder, leaving non secure files in a different folder. Whenever a page in the secure folder is accessed, https is automatically invoked.

I think my other account is hacked and the hacker changed the password and the security questions and i can't retrieve it , so does anyone know how to have a live (online) conversation with a senior or an apple employee responsible for such problems ?!

Please help me because it's not the first time the account has been hacked, every time i found out that it was hacked i changed the password, but this time it is not easy because he changed the alternative email-adress and the security questions.

Call the Apple support phone number for your country:
http://support.apple.com/kb/HE57
and the 1st tier agent should be able to assist you or transfer your call to the Account Security team.
Regards.

HT204053 i want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is

I want to change my icloud id on my iPhone, but it won't let me now that i have upgraded. I no longer have the password and the problem is It is using an old id which the email isn't valid and the security question does not think my birthday is valid. I cannnot delete the account because "find my iphone" wants the password linked to this old account. But when i go into the find my iphone app it is using my corect Apple ID. How do i fix this?

If you still have access to your old email address, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. You can now go to Settings>iCloud and sign in with your correct iCloud ID and password.
If you don't have access to your old email address, you will have to contact Apple to have them reset the password so you can disable Find My iPhone and sign into your iCloud account. You can either go to https://expresslane.apple.com, select "More Products and Services", then "Apple ID", then on the next page select "Other Apple ID Topics", then "Lost or forgotten Apple ID password" and click "Continue"; or you can contact Apple Support (http://www.apple.com/support/icloud/contact/).

How can I get my @mac email to work? when I try to reset password, i cannot access email for this and the security tells me I have wrong date of birth

Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac

COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING

I forgot my Apple ID password and I can't reset it because my email account has been closed and the security questions don't work

I Forgot my Apple ID password and I can't reset it because the related email account has been closed and the security questions don't work! How do I solve this? Thank you.

Click here and contact Apple.
(113292)

How to maintaing E-Business suite with latest product levels and bug/securi

Hi All,
How to maintaing E-Business suite with latest product levels and bug/security fixes?
backup strataegies for database and E-BS suite?
what is mean by gather user requirements?
Please some one explain briefly...........
Thanks

Please post your question in the appropriate forum.
E-Business Suite
http://forums.oracle.com/forums/category.jspa?categoryID=3
Thanks,
Hussein

I kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

i kept a dual boot of windows 7 and mac os x lion in macbook pro. so, should i keep antivirus for windows 7? which is prescribable between bit defender(bd) and microsoft security essentials(mse)?does bd and mse un-installs easily?

lower your font size unless you have difficulty
MS Security Essentials is excellent
Then again maybe time to investigate Windows 8 RP (which uses Defender)

Implicit Fact and Group Security Filters

Hi All,
Can somebody confirm for me if the Group Security filter as specified under 'Hr Org-Based security' is supposed to be applied in answers when the only reference to the fact table is via its selection as the implicit fact within the presentation catalog.
E.g User selects Dim1, Dim 2 and Fact Measure , the query is filtered correctly by users organisation, when the fact measure is removed, OBIEE keeps the same fact table within the generated SQL as it is the implicit fact used to join the two dimension tables together. The results this time are not filtered by organization and its possible to return dimension records for fact rows that are from a different Org - In this case the user can return absense start and end dates for employees outside of his org (Customer wants this prevented)
Is this expected behaviour ?
Thanks.

Hi John
Thanks for your suggestion
I tried this and He still doesnt have write access
He doesnt need to be able to lock and send values via essbase ... However when we are in planning, He cant submit data to the dimension members mentioned above.. i.e the cells are all green
I have checked and doubled check the security on the dimension members (and form security) in the form that he cant edit
Do you have any other suggestions?
Thank you
PD

I have a MacBook Air which has a camera installed in it but it doesn't seem to work for some things like iMovie and my security camera for emergencies. It does however seem to work for Photobooth and facetime. Please write back and help my mac's problems.

It'd be nice if you could help me with my mac's problems so I can start using iMovie and my security camera again. Thank you too all that answer.
--JaySwanny

User Password Reset

Robohelp 9 and PointSec Security

Similar Messages

Maybe you are looking for