RoboHelp for HTML 9 - Problem with viewing .chm file on 64bit machine

I am working with RoboHelp for HTML 9 on a 32 bit machine. Recently, we encountered problems when viewing a .chm file on a 64 bit machine. The TOC was fine, but the topics did not appear, only error message "Navigation of this web page cancelled". My compilation settings did not change since the last compilation some months ago. What happens?

Generally, I've only ever seen the need to ensure the CHM is unblocked if it has been downloaded from the web. I could see where it could possibly occur if one moved the CHM from a network drive to a local drive, but I'm skeptical that would be required in that case.
Cheers... Rick

Similar Messages

Problems with viewing RAW files and cannot update to ACR 5.7

Hi
I purchased a canon 7D today, then went to take some pictures and came home to find my RAW files are not readable by Bridge or Photoshop. I have done some research and it seems that the solution would be to update. I did this. However, two of my five updates failed to install, one of which is ACR 5.7. I then looked into this and have found the best option is to manual install, but this is confusing me as the directories is says to use do not exist on my mac. I don't know what to do, can anyone help? I just want to be able to view my files in Bridge and edit in ACR and photoshop!!!!!
Thanks.

If you download the 5.7 camera raw update from the following link,
the installation should be automated:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4682
MTSTUNER

RH8 for HTML: Problem with Multilevel List in published topic(s)

I have discovered that working with the multilevel list and reapplying it (changing a level 2 to a level 1, for example) inserts numerous tags that don't show up in RH design view nor in an IE view of the published content, but the published help renders badly in Firefox (like a "justified" paragraph style that inserts broad spacing between words).
The bad thing is that broad spacing is added to a command where no spaces should be, which looks fine in IE, but renders like this in Firefox:
sqlplus XBRLDB/[email protected]:1521/ubmatrix
@C:\xbrl_database\database\Oracle\ verify_registration _v1_0 _1 .sql
The "source" for published content looks like this:
sqlplus XBRLDB/[email protected]:1521/ubmatrix
@C:\xbrl_database\database\Oracle\verify_registration
_v1_0_1
.sql
How do I prevent the tags from getting added to the RH project files? How do I remove them using the RH interface?
Why are they getting added in such wierd places?
PS: I have kept the paragraph style Numlist (which is how I define numbered procedures). I just apply the multilevel list to paragraphs tagged with this style. It's been working OK, except for the newly discovered problem above.
I'm using Verdana family and the numbers look good. I've only looked at the published HTML which looks like this: I
1 Do this
looks like this in a broser view:
1 Do this
Is this the 'expected' HTML code for numbered procedures (all this to precede a paragraph with a number), or is there a more efficient way to render numbered/mutilevel lists?

Hi there
I just created a small video that may be helpful for this.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

RoboHelp HTML does not generate .chm file

We have a large help system for F1 help with about 2,000 help
topics in about 50 different Word .doc files. We had used RoboHelp
for Word previously, but with the goal of generating a single .chm
help file, we tried using RoboHelp HTML to change the Word .doc
files to .htm files. RoboHelp HTML does this conversion and creates
2,000 .htm files.
When we try to generate the .chm file for the help system,
RoboHelp for HTML does not respond and does not create the .chm
file. Is RoboHelp HTML not capable of handling such a big help
system? Are there any workarounds to generate the .chm file
successfully?

Peter, thanks for your input. Here's where we are. We opened
RoboHelp HTML and converted the Word docs into .html files. Then we
were able to generate the .chm file (it worked this time) using
RoboHelp HTML. We have about 50 .gif images, and no external links.
The actual number of HTML files with help topics is close to
4,000 for this F1 field help in our application. Ideally, we would
love to have a master project with sub-projects, but it doesn't
appear as a practical alternative. The .hh file (for F1 field help)
is generated from the application by the developer and given to us.
In order to have a master project and slave projects, we
would have to manually split that automatically-generated.hh file
into individual .hh files, true? That means we would have to
correlate which .html help topic file corresponds with which map id
number, then chalk out how we want to divide the .html help topics
into individual projects that correspond to their .hh files?
This help system I inherited is 10 years old, and the
resource time we would spend (if we chose to modularize this help
system) would be gigantic in scope. If there is a simpler and
efficient way to modularize our F1 help system, I would love to
hear about it!

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

For the last 2 days whenever I try to upload photos from my iPhoto page to facebook I get an error message: Bad Image There was a problem with the image file. I haven't knowingly changed any settings on iPhoto or facebook. Can anyone help, please ?

I need help with uploading photos from iPhoto to facebook. I could do it till 2 days ago. Now any new photo I try to upload gives me an error message:
Bad Image
There was a problem with the image file.
Please help.

Can you drag it to the Desktop?

Problem with viewing Adobe PDF documents

Problem with viewing Adobe PDF documents
I have a Windows 7 Home Premium Computer
I have read all the suggestions and I have tried downloading multiple versions of Adobe Reader for Windows 7 and Vista from http://get.adobe.com/reader/otherversions/.
Prior to downloading each version I would delete the current version using control panel programs uninstall.
After each new installation I would shut down the computer and then restart the computer.
I have tried downloading versions with and without having my antivirus (CA Total Defence) running.
I am told after download that the version downloaded successfully.
I have read Acrobat Help http://helpx.adobe.com/acrobat/kb/troubleshoot-reader-installation-windows.html and followed the instructions.
None of the above has helped.
The problem is no matter what version of Adobe Reader I download, I cannot seem to open a PDF and read it. Nor will the Reader itself stay open.
1. If I try opening the reader from the desktop link or from the actual program menu, the reader opens for about 5 seconds and then closes of its own accord. If I try to click on any of the reader menus (eg File, Edit, View, Window, Help, Tools) then a warning bell is sounded and the menu does not open. Shortly thereafter the reader closes.
2. If I try to open the reader by double clicking on a PDF document then the reader opens but the document is not shown (only the grey PDF reader screen is shown) and then the reader closes after about 5 seconds of its own accord.
The desktop shortcut shows as the 'red Adobe Reader icon'. But the actual program menu icon shows as a blank folder icon. All PDF documents show as the PDF Adobe icon.
I have tested various PDFs and none will open on this computer but they will open on other computers.
I have created a word document and saved it as a PDF. It looked like it had save correctly (has the appropriate icon) but when I try to open it as per step 2 above then the document is not shown and then the reader closes after about 5 seconds of its own accord.
Does anyone have any ideas about what is going on and how I can fix this?
Could you please answer in this forum and email me at [removed]
I am so puzzled and frustrated.

Thank you so much this did the trick.
I spent so many hours on trying to sort this out and your answer was so simple and clear.
Regards
Kazzamday

RoboHelp for Word - Breadcrumb Links in .CHM?

From what I've read, 8.0 supports breadcrumbs in .CHM files but I can't find any reference to it in RoboHelp for Word. If I create a new blank project in RoboHelp for HTML and go to generate the .CHM, I get the breadcrumb option and it works correctly.
Am I looking in the wrong place or are breadcrumb links not supported for .CHM in RoboHelp for Word version 8.0?
(Because I know it will be suggested - no, unfortunately I can't just import my documents into RoboHelp for HTML and maintain the project there.)
Thanks!

Hi there
It would appear that you have your answer. If you choose to create CHM from Word, don't expect to see an option for Breadcrumbs in the CHM file.
Sorry you can't maintain things in the proper tool. I feel for you. Using Word to create and manipulate HTML content is sort of like trying to mix oil and water. You find yourself often frustrated with issue after issue.
Cheers... Rick
Begin learning RoboHelp HTML 7 within the day - $24.95!
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Problem with reading mp4 files with QT 7.4.1 or mpeg Streamclip

Hi,
I used to convert some .flv files into .mp4 files with iSquint and then into .dv files with mpeg Streamclip in order to re-work and compile these files on a DVD using iMovie and iDVD.
However I cannot do it anymore since I upgraded to QT 7.4.1. iSquint uses the mpeg-4 video codec to convert the file. Therefore I cannot open them with QT 7.4.1 anymore and I cannot convert them into .dv files with mpeg Streamclip anymore since Streamclip is uses a QT plug-in.
I have tried to solve the problem using Perian but this plug-in does not work with my version of Mac (Panther 10.3.9). I also tried to downgrade to an older QT using Pacifist but it nearly crashed my whole computer (fortunately I could fix that by reinstalling QT 7.4.1).
Has someone a solution to my problem?
Thank you in advance.
Steve

Not all the following will apply to Panther (10.3.x) so look carefully on the sites mentioned for the correct versions:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
It is known to work in the great majority of cases with Safari 3.0.4, QT 7.3 or 7.4 and OS 10.4.11. (If you are running Leopard, ensure that all plug-ins have been updated for OS 10.5)
Assuming you already run Tiger versions OS 10.4.9 or above (this has not yet been verified with Leopard) and have Quicktime 7.2 or above, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.
Adobe FlashPlayer should first be uninstalled using the appropriate uninstaller available here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14157&sliceId=2 and then the latest version obtained from here: http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash and installed.
(You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.)
In earlier versions than QT 7.1.3 in Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
You should also ensure, if you are running Tiger 10.4.11 or Leopard, that you have downloaded and installed the correct version for your Mac of Security Update 2007-009.1.1, which also deals with the Quicktime/Flash issues you may have experienced, such as the '?'. What happened was that both Quicktime as well as Adobe FlashPlayer tried to play the Flash video at the same time. This no longer happens. (N.B. Security Update 2007-009 1.1 requires both a restart and a permission repair.)
If you get problems with viewing video on a website try moving this file to your Desktop:
Hard drive/Library/Internet Plug-Ins/QuickTime Plugin.webplugin
and then restarting Safari. If all now works, you can trash that file.
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them). However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from http://www.divx.com/divx/mac/
Now go to Safari Preferences/Security, and tick the boxes under Web Content (all 4 of them) to enable Java.
Lastly open Audio Midi Setup (which you will find in the Utilities Folder of your Applications Folder) and click on Audio Devices. Make sure that both Audio Input and Audio Output, under Format, are set to 44100 Hz, and that you have selected 'Built in Audio'.
Important: Now repair permissions and restart.
You should also consider having the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Visual Source Safe and RoboHelp for HTML

Do you ever successfully use Visual Source Safe for RoboHelp
for HTML? I got error when I checked out the file, looks like file
format in RoboHelp is not supported in Visual Source Safe. Can
somebody share the experience? Thanks a lot!

Hey, Cathy!
The RoboSource Control in X5 was "adequate" in its day. But
remember, that was nearly 4 years ago
The problem was that the "free" Access database was not
really robust enough and to really make use of it, you need to use
MS SQL Server, which is expensive.
That was then. This is now. The RoboSource Control 3 that
comes with RoboHelp 6 is WAY more better
This is because, it allows you to use a free version of MS
SQL Server Express for a much more robust database.
So my advice would be to upgrade to RoboHelp 6 for sure. It's
not just hype. If for some reason you can't upgrade, then you might
be able to get away with the Access Database given that there are
only two of you. Since you already have it, you could create a
little test bed project and try it out. (I have a suggestion for
how to do that in my article. See link below)
For the lowdown on RoboSource Control 3 see this Matthew
Ellison's fine article
Getting
started with RoboSource Control 3 in RoboHelp 6
If you're interested in the "old" RoboSource Control that
comes with X5, you can check out my article to get you started.
Sharing
One RoboHelp Project Among Multiple Authors
Thanx,
john

Problems with embedding .flv files in DW CS4....

I inserted an .flv file into my DW CS4 html page. I previewed it in my browser, and it worked for a little bit, but now it's not working in any browser, I'm not sure what happened. I included a screen shot in the attachments of what was happening in all the browsers.
Thanks for any help,
Thank you,
Aza

Not sure if that was meant for me
You can tell who was the intended recipient by looking at the header of the message -
6. Sep 10, 2010 6:50 AM in response to: FordGuy48 <<----
Re: Problems with embedding .flv files in DW CS4....
A link to the page would help us diagnose your problem.
Safari tells me that this file -
FLVPlayer_Progressive.swf
is not where you have told the page to expect it. Did you upload it?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

RoboHelp for HTML 9 - Problem with viewing .chm file on 64bit machine

Similar Messages

Maybe you are looking for