RoboHelp for Word will not show new .WMF graphics

I am working on a help file, and I have to insert equations that I would like to attach pop-ups to. I add the .wmf graphic and add the pop-up, but when I compile the image is not there. This is an older file that was converted over to Robohelp for word and it has .wmf graphics that compile. The only ones that do not show up are the new ones I add to the project. There is just a blank space where the graphic should be. The only way I can get the graphic to show is to convert it into a .shg graphic and then it works. I don't want to keep converting the .wmf file to .shg it is just a waste of time, and it makes my image folder double in size. I have tried inserting the equation as an object in word, but that will not allow me to link it to a pop-up and still have the equation there. Any help with this would be greatly appreciated. Thank you.

Peter and Brian, THANKS so much! RoboHelp for Word is working
now.
Peter, your advice to install RoboHelp AFTER installing Word
was key in solving this problem.
For a quick summary of the result -- our Help Desk
uninstalled and reinstalled Outlook, Word, and RoboHelp. Then they
reinstalled Word and Outlook; needed to change an "Advanced"
setting in outlook; to get Word to stop giving me the error
messages, they needed to redo my user profile. Then after I was
confident that Word and Outlook were working correctly, this
afternoon I installed RoboHelp X5 via my CD, and then downloaded
and installed these two patches from Adobe.com:
- rho_x501.exe (for the RH Office Word 2003 Support Update)
- rho13_x502.exe (for the Microsoft XP Service Pack 2 Support
Update X5.0.2).
I'm so thankful that RoboHTML and RoboHelp for Word seem to
be working well! Thanks again!
Janice
P.S. I do have one more question about a patch that I've not
yet loaded, but I'll post that under a separate subject.

Similar Messages

With new PC RoboHelp for Word will not open

When I try to open RoboHelp for Word, this error message
appears:
"The version of Microsoft Word you have installed is not
supported. Please install an earlier version of Word before running
RoboHelp for Word."
With this new PC installation, I'm still using Word 2003,
which is the same version that I used previously. However, the PC's
operating system is now XP, whereas it was previously Windows 2000.
Any ideas?
Thank you!
Janice

Peter and Brian, THANKS so much! RoboHelp for Word is working
now.
Peter, your advice to install RoboHelp AFTER installing Word
was key in solving this problem.
For a quick summary of the result -- our Help Desk
uninstalled and reinstalled Outlook, Word, and RoboHelp. Then they
reinstalled Word and Outlook; needed to change an "Advanced"
setting in outlook; to get Word to stop giving me the error
messages, they needed to redo my user profile. Then after I was
confident that Word and Outlook were working correctly, this
afternoon I installed RoboHelp X5 via my CD, and then downloaded
and installed these two patches from Adobe.com:
- rho_x501.exe (for the RH Office Word 2003 Support Update)
- rho13_x502.exe (for the Microsoft XP Service Pack 2 Support
Update X5.0.2).
I'm so thankful that RoboHTML and RoboHelp for Word seem to
be working well! Thanks again!
Janice
P.S. I do have one more question about a patch that I've not
yet loaded, but I'll post that under a separate subject.

Word will not save new files or open ones recieved in ichat

Word will not save new files or open ones recieved in ichat
i have had this problem before and had to take my computer to the apl store were someone at the genius bar fixed it by deleting some preferences thing i do not remember how who did it or how he got to that file and need help to fix this problem

Try Finder>Library>Preferences>Microsoft>com.microsoft.word.prefs.plist, and delete that last one.
I don't know that it will solve your problem, but I'm pretty sure that's what the guy did before. Good luck!

Mail will not show new emails on my Mac Air but sends OK. Mail server is working

Hello
As I said above, Mail will not show new emails on my Mac Air but sends mails OK. The Mail server is working because my iPad is receiving and displaying incoming messages.
Your advice is most welcome.
Thanks!

''LeoJoy [[#question-1058991|said]]''
<blockquote>
Thunderbird successfully displays all of my e-mail accounts in the list of accounts and displays all of the inboxes correctly however it doesn't display the e-mails at my newest address in the unified inbox. To see them, I have to click on that particular e-mail accounts inbox. In every way, this account appears to be set up the same as the all the other ones. The newest e-mail account is a second account through Zoho. What do you think is the problem?
Mac OS 10.9
Thunderbird 31.6
[email protected]
</blockquote>
Thank you. I had to select the search from the menu instead og by right clicking but it worked just the same.

Itunes library will not show new music

Since downloading itunes 11 my library will not show newly downloaded music. That includes music that was purchased from the itunes store. Has anyone else had this issue?

Some people have had success with turning off iTunes Match or logging out of the itunes store and logging in again

Iphone will not show new message alert for email sent to subfolders

I have successfully synced my iphone with the exchange server so I am getting push email from entourage to my phone. However I have subfolders set up in entourage so that my email is organised. These subfolders are showing on my iphone. Although email sent to subfolders is pushed to the iphone (to the relevant subfolders), when the phone is on the home screen it does not show a new mail alert for those emails. It only shows a new mail alert for emails going to the main inbox. Obviously I need it to alert me if email is coming in to subfolders. Can anyone help with setting this up?

Try a reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

Icloud will not show new apple id

I have changed my email address and also my apple id and password for iphone and ipad including iTunes but not icloud and updated to IOS 8.1. Although icloud shows the old email address as the apple id, it will not take what my records reflect is the old password and says that password is incorrect.. icloud does show my new email address as the primary email. icloud will also not allow me to use the new password with the old email, and if I try to reset the old password, it will not let me use the new password since it says I can't use one that's been used within a year. I have the new apple id and new password everywhere but icloud--what can I do to make icloud correct without changing the password again? URGENT the old email address may be terminated at any time.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iDevice, then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, and your old ID is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice on your device, even though it prompts you for the password for your old account ID. You should then be able to delete the account. (If you have photo stream photos that you want to save, save them to your camera roll before deleting the account.) When you're done, go back to https://appleid.apple.com and recreate your current ID again.

[SOLVED]Mutt will not show new incoming mails

Hello,
I set up on my box Mutt + offlineimap + msmstp with my gmail account.
msmtp is working fine, offlineimap is croned to run each 3 mn and do its job, as it fetch new mails.
My issue is that I do not see the new emails coming on my terminal. If I don't type <gg> (go to top of index), I will not see the new incoming mails.
This issue seems to me new (a few days), so maybe did I changed some config line or did a package upgrade modified some behavior.
On request I can post my muttrc and offlineimaprc.
Thank you for any help.
Last edited by gabx (2012-08-03 11:10:57)

I added these two lines in my muttrc:
set mail_check = 5
set mail_check_recent = yes
But it didn't changed anything. I still need to return <gg>.
Intuitively, my first idea was that Mutt didn't know where to look at to see if new mails are here. As I am not an experienced user, my config files may certainly contain errors, even if I spent days to write them. But if Mutt doesn't know where to look at, it shouldn't show new emails when I go to top of index.

IPhone will not show new email in folders other than Inbox on Yahoo

Hello,
I have setup Yahoo email account. I have several folders within my yahoo account (15+), now the new email notification ( sound and new email icon ) works only on Inbox, If I have new email in my other folder, iPhone will not notify unless I go inside that folder.
Has anyone seen this problem and is there a workaround ?
I am sorry if I am repeating the Q, I searched here but did not find this Q?
thanks

Hello Argish,
Thanks for using Apple Support Communities.
To troubleshoot this issue where you are unable to receive email on your iPhone, please follow the steps in the article linked to below.
Get help with Mail on iPhone, iPad, and iPod touch
Take care,
Alex H.

Just upgraded to TB 31.4.0 and it is no longer asking for password, will not download new mail but does connect to POP server. I can send (it asks for p-word)

Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )

''Pupster [[#question-1041384|said]]''
<blockquote>
Failure to download or allow sign in started with current upgrade.
Despite inability to sign in, I have access to all settings and address book.
I've "repaired" the inbox folder and checked the firewall settings. Connection to POP server is fast. Downloads for the last week or so (prior to upgrade) have been VERY slow...
Likely the solution is "simple", but I'm very much NOT a "software tech" kinda guy.... If you can help, please use small words ; )
</blockquote>
No idea why, but the problem seems to have resolved its self..

Imovie will not show new photos from iphoto?

The imovie project I'm working on needs several photos that I recently downloaded. However when going into the photo section of imovie these new photos do not appear in the album that they have been placed in.
Is there anyway to get them to appear?
Any help would be appreciated!

limey1
Welcome to the Apple Discussions.
It's a while since i used v5 but I think this is true.
Whereas with early version of iPhoto there was a separate folder for each album, starting at v5 the app doesn;t do that. Instead the album information is stored as part of the main database file. At heart, it's a direction to the app to display certain pics together. The advantage being that a single pics can be many, many albums with no wasted disk space.
Regards
TD

This is a bit of information for folks that use Robohelp for Word.

I know this is all a day late and a follar short but for those folks that still use Robohelp for Word:
If your company is going to Windows 7, X5 will not work. You need to bump it up to at least RH8.
Even after you upgrade, if you use the tripane (winhelp_2000) view in RH for Word, it will not work on Windows 7 even with the microsoft patch. With the patch it will look like an older version of RH in winhelp_4. At least I have not been able to get it to display.
What will work is if you compile it in Webhelp. You will loose some links. I know I should be moving to Robhelp Html and I tried, but when I did that I got a lot of garbage at the top of all my topics, I lost all my external links and I would have to retrain my partner...
Now about links. My only complaint about Robohelp for Word was it's limited external linking capacity. If you use RH for Word you know you can only brouse to the net or to an htm or html document. It doesn't mean you can't link to a PDF or an excel spread sheet. You just can't brouse to it. You can manually enter the path. I just changed 740+ htm links to pdf links (pdf in same file as htm and the names were the same except for extension) and it worked. If you intend to try this back up.
Anyway, if this helps anyone great..if not thanks for letting me babble. I like my Robohelp for Word in Webhelp format.
Peggy Theo.

Thanks for posting this Peggy.
It is worth adding that there is another way of continuing to work with Word - using Linked Documents in RoboHelp HTML. You create Word documents entirely independent of RoboHelp and then create topics by linking those documents in a RoboHelp HTML project.
You cannot create WinHelp that way but WinHelp is on life support and requires users to download a viewer, you cannot distribute it. It really is time to move on from WinHelp.
RoboHelp for Word is not getting much development and does not get the new features being added to RoboHelp HTML.
Linking is covered on my site.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

When using spotlight search on my 5s it will not show past text messages that haven't even been deleted even if I type a specific word that I know is in a message I want to search for. I have message search turned on in the spotlight settings.

When using spotlight search my phone will not show all text messages with a common word even though I have not deleted any messages from my phone and I have the message search turned on in settings under spotlight search. The search only shows the messages that are recent within the past day or so. Why won't it show the other messages when I search for them even using a specific word that I know was in the message I'm searching for.

Hello ChiomaM,
It sounds like you are not getting notifications for new text messages that are coming in, and you must manually check the app. I recommend checking the Notification settings to see if they are configured correctly:
iOS: Understanding notifications
http://support.apple.com/kb/ht3576
iOS apps can provide three types of notifications:
Sounds: An audible alert plays.
Alerts/Banners: An alert or banner appears on the screen.
Badges: An image or number appears on the application icon.
You can view which apps provide notifications and adjust notification settings using Settings > Notification Center. For additional information, refer to the user guide for your device.
Thank you for using Apple Support Communities.
Regards,
Sterling

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

OS is Mountain Lion, upgraded no problems, used an external Hard drive for my time machine, now my iPhoto will not show any of my photo's or ay new ones I import! Help please!!

Do you get this window when you hold down the Command+Option keys and launch iPhoto?
If not then you're not holding down both keys long enough.
OT

ITunes will not show my purchases before October 18, when I had a different username. How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

iTunes will not show my purchases before October 18, when I had a different username. How do I get the older purchases (more than 5,000) listed when my password is rejected and it won't issue a new one for that username?

Wow that was really quick, thank you so much. Im not sure at all which version it was because i said it was around 4 years ago he bought it. I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names. isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
sarucia

RoboHelp for Word will not show new .WMF graphics

Similar Messages

Maybe you are looking for