RoboHelp Server 8 -- can it run on LINX

We're a Linx shop. Can we run RoboHelp Server 8 on it. It says Windows. However, Tomcat and Apache can run on Linx so why can't RoboHelp Server 8?

RoboHelp Server 8 can run on Windows only. Though Tomcat and Apache can run on linux but there are some windows specific components in RoboHelp Server 8 and hence you cannot run it on Linux.
Tulika.
RoboHelp Server Dev Team.
Adobe.

Similar Messages

Reports 6i without report server, can I run schedule report job ?

I use Reports 6i, no Report Server, can I run schedule job to print reports in the midnight?....In server side is better, but if in client side will be ok...
Thanks

Yes, you can run a schedule job to print reports at a scheduled time. Below is how (done in command prompt):
h:\>at /?
The AT command schedules commands and programs to run on a computer at
a specified time and date. The Schedule service must be running to use
the AT command.
AT [\\computername] [ [id] [DELETE] | /DELETE [YES]]
AT [\\computername] time [INTERACTIVE]
    [ /EVERY:date[,...] | /NEXT:date[,...]] "command"
\\computername     Specifies a remote computer. Commands are scheduled on the
                   local computer if this parameter is omitted.
id                 Is an identification number assigned to a scheduled
                   command.
/delete            Cancels a scheduled command. If id is omitted, all the
                   scheduled commands on the computer are canceled.
/yes               Used with cancel all jobs command when no further
                   confirmation is desired.
time               Specifies the time when command is to run.
/interactive       Allows the job to interact with the desktop of the user
                   who is logged on at the time the job runs.
/every:date[,...] Runs the command on each specified day(s) of the week or
                   month. If date is omitted, the current day of the month
                   is assumed.
/next:date[,...]   Runs the specified command on the next occurrence of the
                   day (for example, next Thursday). If date is omitted, the
                   current day of the month is assumed.
"command"          Is the Windows NT command, or batch program to be run.
h:\>for "command" - you may want to consider writing a batch program to call your report.
Hope this helps.
-Marilyn

Can we run an online game server on a os x server, can we run an online game server on a os x server

can we run an online game server on a os x server

Yes, you can.
Probably unnecessary, though.
OS X Server provides different services than what a game server expects and uses. (There can be reasons to run OS X Server on your local network — mail services, web services, local DNS services, etc — and there can be reasons not to — fewer or no services configured running for the inevitable remote attackers to attack, etc.)
If you're one of the many folks looking to run Minecraft Server here, that definitely doesn't require OS X Server.
Once Minecraft Server and Java and the related peices are configured, the next biggest issue the Minecraft folks tend to encounter is with establishing a static or dynamic IP connection into the Minecraft Server — port forwarding and such — and with establishing the dynamic or static DNS translations to allow the remote users to connect to the server, and then with hardening the OS X or OS X Server system against the inevitable security attacks against the system.
There are previous discussions of installing and configuring and troubleshooting the Minecraft Server bits posted around the forums, and it's likely been discussed elsewhere around the 'net, as well.

Clickonce application can't run on Linx 10 Windows tablet for full screen

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu

My C# Clickonce application can sucessfully installed and run on a Linx 10 Windows tablet. My working station is set as 1280*800 resolution and the tablet is also been set as 1280*800. The form size is therefore set to 1280*800. My Clickonce application
can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen. Is any one can tell me why? What I need is let my software to run in full screen on this windows tablet.
I don't want to set the windows forms to 'maximum'. This will make the buttons on the form looks mess.
Best wishes,
Mingxu
Hello Mingxu,
Maybe you mean your project is a windows form application, and you deployed it with ClickOnce and get that installed, right?
>>My Clickonce application can properly display on my working station (full screen), the problem is when it runs on this windows tablet, it can't be properly displayed for full screen.
Which form has this issue, the one when you installing that application or the form you are running the application?
I will based on the result to get the proper forum to help you, and if that is an issue about the form of your windows form application, then this is the right forum for your issue.
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Failed configuring Portal Server. can't run cacaoadm.bat

Hi,
I am trying to install Sun Java ES5 (2006Q4) on window XP. The configuration for portal server was failed. When I checked the logs, it complains cacao default instance was disabled and couldn't started. I went to the the directory and tried to manually run cacaoadm command. It returns:
C:\Sun\JavaES5\share\cacao_2\bin>cacaoadm.bat enable
This action cannot be performed by a non privileged user.
I logged on to the windows as a user who is in the administrators group. Any other components installations were fine. I really have no idea how to solve this problem as there is no user account as administrator. Can someone please help?
The portal config error from the log are as following:
[#|2007-06-26T15:22:14.821+1000|INFO|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0021:Waiting for Cacao Server to Startup|#]
[#|2007-06-26T15:22:15.696+1000|FINEST|SJS Portal Server|debug.com.sun.portal.fabric.util|ThreadID=37; ClassName=com.sun.portal.fabric.util.StreamLogger; MethodName=run; |PSFB_CSPFU0004: C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm(Output)=default instance is DISABLED at system startup.|#]
[#|2007-06-26T15:22:15.712+1000|FINEST|SJS Portal Server|debug.com.sun.portal.fabric.util|ThreadID=37; ClassName=com.sun.portal.fabric.util.StreamLogger; MethodName=run; |PSFB_CSPFU0004: C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm(Output)=default instance is not running.|#]
[#|2007-06-26T15:22:15.790+1000|INFO|SJS Portal Server|debug.com.sun.portal.fabric.tasks|ThreadID=10; ClassName=com.sun.portal.fabric.tasks.Cacao; MethodName=execCommand; |PSFB_CSPFT0342:<C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm status> Returned <default instance is DISABLED at system startup.
default instance is not running.
|#][#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0020:Cacao Server startup failed|#]
[#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0024:Failed to configure the Host
com.sun.portal.fabric.tasks.ConfigurationException
     at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:635)
     at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:166)
|#]
[#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.ConfigurePortal; MethodName=main; |PSFB_CSPFC0014:Failed configuring Portal Server!!
com.sun.portal.fabric.tasks.ConfigurationException: com.sun.portal.fabric.tasks.ConfigurationException
     at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:749)
     at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:166)
Thank you very much
Regards,
Tara

Hi Deepak,
Thanks for the post.
Use cacaoadm restar gives me the same error.
I found out that is a limitation for the windows version I am using. Basically, the account for installation and configuration has to be an local administrator not in network.
Cheers,
Tara

¿Can i run the Microsoft Project Server in Mac OS X Lion Server?

When i use the Mac OS X Lion Server, or even, the Mac OS X Leopard Server, can i run another program like Microsoft Project Server, because i need the features that this gives me.
Thanks you for your solutions
(is it possible on Xserver?)

Unfortunately, no one will be be able to answer your question re. a not-yet-released OS; they either do not know or are prevented from sharing their knowledge because of an NDA.

Is RoboHelp Server the solution for us?

Hi all,
I'm trying to figure out whether RH Server is the solution for us. I've seen a few similar posts in the forums, but none that really answer my specific questions. I'm hoping for feedback from someone with experience in RH Server, who is perhaps in a similar situation to us.
We are a software development company, creating desktop software for PCs. We have three main applications, and approximately 20,000 users. I am the company's (only) Tech Writer.
Currently I provide documentation (user guides) to our clients in the form of the good ol' CHM file. I develop these in RH8. Each of our applications is bundled with an installed CHM file which users access by pressing F1. I'm sure you're all familiar with this process. Our users run our software on their own systems, completely independent of us - there's no connection to us whatsoever. However, they all have Internet access, as it's a requirement for them to be able to use certain functionality within our applications. Hold that thought.
I also write Knowledge Base Articles in MS Word, as PDFs, which users access via our web site. Internal to our organisation, I provide KBAs and other such material for our Technical Support staff. These aren't available/accessible to the public. I write these in Word because they need to be sent around to a team of reviewers from time-to-time, and whilstI'm the only person with RH installed, everyone has Word.
What I'm hoping to achieve with RH Server is this:
Do away with the old CHM files that our users have. They're just awful. I'm hoping that in future, when our users press F1 from within our applications, they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp. Forgive my ignorance if I've used incorrect terminology. That way they'll always be reading the latest Help content, live, online, instead of what I wrote last time we sent a product update out. I imagine our programmers will have to edit the functionality behind the action of our users pressing F1 in our applications. Has anyone done this? Are there any issues we should be aware of? What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected? Has anyone done this with a similar number of users to us? We could well have 100s of users trying to access the system simultaneously.
Gather feedback from users. From what I understand, we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users. Can anyone give me feedback on their experiences with this? Any tips/hints/issues I need to be aware of? Is it possible for us to determine which users accessed which content? Remember, the idea is that users should be able to access this content by pressing F1 - I don't want them to have to sign in every time they need to access our Help system - it should be seamless to them. So, I'm wondering how it would be possible to track user usage without making them sign in. This is important to us because some of our content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Host our internal documentation on the same server as our public documentation. Is it possible to host all of our internal, private documentation on the same RH Server, making it available to our Tech Support team (and other internal teams) only? I imagine we could do this by password-protecting it, but I want to ensure that the public don't even know it exists. ...and our Tech Support people would not be impressed with having to sign in every time they wanted to access their Knowledge Base. Any tips here regarding locking down / restricting access to content?
A quick note about collaboration:
Currently, although the Help menus are developed in RH, the KBAs and other PDF documents are written in MS Word. I send them around to a team of reviewers who add their comments/edits and send them back to me. From what I understand, this is something I can do with RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing. Have I understood this correctly? Does RH Server play a part in this process? Can I use RH Server's feedback capabilities as a mechanism for my review team to make edits/comments? I guess I'm trying to get an understanding of how sophisticated the RH Server feedback system is. If I can use RH Server to have the team read/review documents, it'll save me having to manage a bunch of Word documents that I email them. It'll also minimise the chance that a redundant document gets distributed by mistake - something that can occur because people use their locally-saved documents I emailed them earlier, instead of the finals.
Thank you.

Hi, symmetricalMan
Let's see if I can tackle some of these "inline". There are a lot of moving parts to your system (you're a busy guy!)
I only have time for a few of these. Perhaps Colum McAndrew and others will chime it with their experiences.
>>they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp.
It would be WebHelp Pro in the scenario you mention (not AIR Help).
By "taken to a corresponding page" you are referring to Context Sensitive Help which RoboHelp Server does support (including your F1 scenario).
>>What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected?
Hmm. You could either package a plain WebHelp (not Pro) output and distribute for access on a share drive. The detection thing would be up to your developers. Come to think of it, AIR Help does have a potential alternative here which might be worth looking into. Obviously, there would be two systems to maintain. I'm not up to date on it, but you'll find info here in the online help: http://help.adobe.com/en_US/robohelp/robohtml/WS81F63111-6ACF-4a02-B2B2-461FEBFA8093.html
>>.we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users.
Actually, the "feedback" is anonymous (no names are collected.) You can however, create "Areas" and analyze the traffic on topics according to sub-sets of your users.
The feedback is not direct from the users. In other words, RoboHelp Server (at least for now) does not support Commenting (as AIR Help does). So Feedback Reports are derived from the end-users "surfing" your site and collecting their search terms verbatim to get an idea of what they are searching for in order to improve your content.
>>So, I'm wondering how it would be possible to track user usage without making them sign in.
RH Server Sites do not have to be "Protected" by authentication. It is your choice. You can have some sites (called Areas) that are authenticated and some sites that are not authenticated, all on the same RH Server. RoboHelp Server uses a database and can authenticate users (by setting up protected "Areas".) However, my networking knowledge is limited and you would have to ask someone else about "persistent logins" etc.
>>content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Yes, you can do this. This is where RoboHelp Server can be used to create "Areas" for different content to be delivered to different audiences.
>>Is it possible to host all of our internal, private documentation on the same RH Server,
Yes you can. However the Tech Support sign in scenario question would have to be answered by someone else. It's hard to know from where I sit.
>>RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing
Yes, this workflow would seem to work for you. However, RoboHelp Server plays no role in this review one way or the other. There are many alternatives for sharing the PDF which is described in the documentation.
See #6 on this page:
http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f77726-2db1c75912bc47baaf8-7ffb. html
You should also download the Adobe RoboHelp Server Reviewer's Guide which also has videos embedded.
http://www.adobe.com/support/documentation/en/robohelp/9/AdobeRoboHelpServer9_ReviewersGui de.pdf
Hope this helps
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com
Twitter: @hypertexas

Can I use RoboSource without buying RoboHelp Server?

I work for a University that has just purchased a new
database system (Advance for the Web) from SunGard Higher Ed. The
system came with on-line documentation written in RoboHelp that we
can edit to suit the needs of our institution. We could have edited
the individual HTML topics (about 1,300 of them total) without
RoboHelp, but instead we opted to purchase RoboHelp 7 in order to
have the entire pre-existing help project. I am the sole editor of
this project.
I would like to be able to use the RoboSource application in
order to track changes that I make to the pre-existing help topics,
but when I tried to add version control to my project, it prompted
me to create a connection to a database. Our database lives on a
remote server that is password protected. I tried to make the
connection, but I received the following error message: "No
connection could be made because the target machine actively
refused it." The RoboSource on-line documentation describes how to
create a database, but I don't need a new database because ours
already exists... I just can't connect to it via the RoboSource
application. That's my first problem.
The second problem: Even if there is a way to circumvent the
"remote server database issue" and create a "Help" database on my
local machine, I can't figure out how I would DO that. The
RoboSource on-line documentation says the following: "Unlike in
previous versions, creating a database for RoboSource Control 3.1
is not done within the RoboSource Control Explorer, but within a
stand-alone application - the RoboSource Server Configuration
Utility.” Does this mean that I need the RoboHelp Server, or
is there a RoboSource Server, too? Do I HAVE to have one (or both)
of these products in order to use version control?
Please help me. I'm not a technical person, but the people
who I work with who ARE technical people don't understand what I
need to do, either.

@ Gravenstein
Thanks for your response.
>>...We are using three clients and one server. We have
installed the server component together with the client component
on a local PC. That's why I don't know whether the server component
needs a licence key or not. But it should not have to.
I haven't described it correct. We are using 3 clients to
work with. One of these clients has also the server installed. So
the database is not on a server machine but on a local PC. Now we
want to get the database away from the local PC to a server
machine. That's why I wonder if the installation of RSC Server on a
server asks for a licence key?!?
>>...This server doesn't need the robohelp environment
to edit topics, it only needs the server component. This should be
possible to install without asking for a licence key.
>> That is correct. At least that's the way it works
with RH6.
What do you mean with "that's the way it works with RH6"? How
about RH7? Does it work similar? I hope so, because we want to
upgrade and to move the database from the local PC to our server
machine after the upgrade.
By the way, does it function to copy the old database from
the local (server) PC to the server machine and after changing the
clients settings to work with the new server they could use the old
database in the new folder of the server machine again? Or do we
have to write the projects from every client to the new server
machine manually to work with the version control after changing
the server? I'm asking this because I don't know what is stored in
the database. If the folder name of the database is stored in the
database, it doesn't work any longer if it is moved to another
folder!?

How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
Please advise...
VJ

cross posted
http://forum.java.sun.com/thread.jsp?thread=299137&forum=31&message=1184025

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No su

Error: Can't connect to auth server at /var/run/dovecot/auth-master: No such file or directory
error showing up, there is no auth-master file in /var/run/dovecot
this has just happnened over night
any ideas how to re-install dovecot
google search goes on about linux but barely any info about max osx server

auth-master is created when you start the mail service. Deleted if you stop the mail service. If that is not happening, you may have to re-install mail. Dovecot is the IMAP/POP part of the mail service. I am not sure what happens if you disable IMAP. I am guessing it is not there. But that is the extent of any tips I can offer. I suppose you could reinstall, but that seems a bit extreme to me.

HT4437 can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you

can i run my apple TV from an iPad2 with a PC as the iTunes server ... would like to do away with Apple TV remote ... thank you
JJ

As I was saying earlier that is not possible because the Apple TV has no accessible storage and streaming from your iMac is done via home sharing on your local network.
iTunes purchases can be accessed via the cloud on Apple TV. If you have iTunes Match you can access your full music libary from the cloud.
Using the iPad to watch your films would require syncing them and then connecting the iPad to a TV.

URGENT PLEASE:How can I run a a class file on the Apache server?

Hi Guys and Gurus,
I am seeking some favor all of experienced gurus, i.e.
How can I run a a class file on the Apache server? Can I run through an Applet?
How can I set Environment variables in Windows2000 Professional Environment?
Actually, I want to extract some records from a MySQL Database running on Apache Server. I wrote a program just to select the columns and show them. It is now a Class file, Now how can I run this class file from the Server???
The code is here
import java.sql.*;
public class RecordShow {
public static void main(String args[]) {
String url = "jdbc:mysql://localhost/myhost";
Connection con;
String query = "select mytable.column," +
"from mytable " +
"where mytable.column = 1";
Statement stmt;
try {
Class.forName("com.mysql.jdbc.Driver");
} catch(java.lang.ClassNotFoundException e) {
System.err.print("ClassNotFoundException: ");
System.err.println(e.getMessage());
try {
con = DriverManager.getConnection(url,
"myuser", "mypassword");
stmt = con.createStatement();
ResultSet rs = stmt.executeQuery(query);
ResultSetMetaData rsmd = rs.getMetaData();
int numberOfColumns = rsmd.getColumnCount();
int rowCount = 1;
while (rs.next()) {
System.out.println("Row " + rowCount + ": ");
for (int i = 1; i <= numberOfColumns; i++) {
System.out.print(" Column " + i + ": ");
System.out.println(rs.getString(i));
System.out.println("");
rowCount++;
stmt.close();
con.close();
} catch(SQLException ex) {
System.err.print("SQLException: ");
System.err.println(ex.getMessage());
Please advise... THANKS
VJ

Ehm, I wasn't referring to you at all... read up,
there's a comment by jschell saying that CGI might be
easier/better for his purposes.
Yep.
I know PHP/Perl/whatever might be easier for some
purposes, but only if you happen to know them and want
to/are able to use them. Ok. But you aren't the one asking the question are you. And the person who asked the question seems to have absolutely no familiarity with Apache or applets.
So whatever they do they are going to have to learn a lot.
And that does indeed suggest that in all likelyhood they have not investigated the alternatives.
And for the vast majority of internet applications, especially with smaller projects (obvious this person is not working with a large team), using perl, or something besides java, is going to be the best business solution. It is simpler, and more secure (probably due to the fact that it is simpler.)
Since this is a Java forum, I
answer under the assumption that people have made a
choice one way or another to use a Java solution to
their problem, so I try to solve it in Java first, and
only when that fails (very seldom) do I turn to other
solutions.You approach problems by arbritrarily deciding to try to solve it in java first and only if you fail do you then look to other solutions?
My first step is to try to figure out which of the various avenues is going to cost less. (And a secondary, but non-trivial concern, is then to convince the customer that just because they have heard of a buzz word like 'enterprise bean' that it doesn't mean that is a cost effective solution.) We must come from different worlds.

Can you run Embedded PL/SQL Gateway and Oracle HTTP Server at the same time

Hi,
I know this will sound a bit odd but their is a business case for asking this. Can you run APEX via the Embedded PL/SQL Gateway and the Oracle HTTP Server at the same time? Would their be any security/stability/etc issues I'd need to worry about? I know that I'll need to run them on different ports.
Thank you,
Martin Giffy D'Souza
[http://apex-smb.blogspot.com/]

I think I've done this in the past. Theres no technical reason why you can't do this as far as I know.
I can't remember if I used different ports or same port.

Can't Publish from Robohelp HTML 7 to Robohelp server 8

Please help. I have looked everywhere for answers. Here is my problem.
Environment
I have a windows XP machine with robohelp html 7 and the 7.0.3 patch installed. I am testing the trial version of robohelp server 8 for 30 days. The installation of the robohelp server 8 application when ok. I think. I am able to login as admin in the robohelp server web adminstrator application and also able to go the main page (http://mvrobohelp:8080/robohelp/). The congratulations! screen appears.
Problem
When I published the webhelp pro project from the workstation, it does its thing and end with the message that said "successfully published to "Bankway Headquarters". I go to the robohelp 8 server and login as admin and I do not see the project "Bankway Headquarters" in the projects screen under the general area. It looks like the robohelp server does not finish publishing the project.
Client PC messages
Finished applying Template in 6 sec(s)
Finished compiling WebHelp Pro in 378 sec(s)
Successfully published to "Bankway Headquarters".
Thanks for any help in advance

Hi Jose,
We have been using RH7 client to publish to RS8 server for about 2 months now. We have a master project/subproject setup and we too have been unable to get the Web Administration tool to allow us to see our projects by using the "View Project" button. They are listed under projects, but do not display correctly. Also, we are unable to see our complete master project with all of the embedded subprojects using the URL that Adobe supplies (e.g., http://<server>:<port>/robohelp/server). The Adobe response to this was that there was something wrong with our publishing mechanism (whatever that means!).
However, the good news is that we can view our projects just fine by using this path instead: http://<server>:<port>/robohelp/robo/server/general/projects/<master project>/<master project start page.htm>
Now, we are not using any of the context or area stuff so this works. We were also told that in bypassing the default method, we would be unable to get the usage statistics (e.g., frequently asked questions, etc). However, we have not experienced this. We are able to collect the metrics and access the reports using the Web Administration tool.
I'm not sure if this will satisfy your requirements, but for us, that was the only way to get to our project to view the complete master/subproject setup. Let me know if you figure out a different solution. I'd be very interested in doing this the "right way" if we can get it to work.
-Kristen

Can we run oracle Forms 5 Application with 10G in Client/Server?

Hi All,
Can we run oracle Forms 5 Application with 10G in Client/Server
Mode?
Regards
Gaurav

In theory you can run it 2 tier - which means that you have the client (the machine the user is sitting at) being the same machine in which the forms application server is running. So yes. But specifically, we don't support a client server runtime anymore. 6i was the last version.
With 10g you will be running through a browser.
Regards
grant

RoboHelp Server 8 -- can it run on LINX

Similar Messages

Maybe you are looking for