RoboHelp Server 8 Displays Blank Page When Going through the Engine

Here is my issue.
I have 6 projects between 2 areas on our RoboHelp Server 8. I have
never had any problems publishing to the server, our IT department had no problems setting up the server including
installing Tomcat. We've changed the port so it would run on the default http port 80. Everything was running smoothly until this morning. When we go to the link that is used to run through the engine (i.e. http://server name:port/robohelp/server?prj=project name&area=areaname), instead of the redirecting page that we normally get, we get a blank white page that shows done in the status bar. Our IT department has tried to restart the server, did not fix the problem, they tried to restart the services (i.e. Tomcat and the RoboEngine), did not fix the problem. I have tried to connect to the server through the RoboHelp development interface and I get an Connection to Server Failed error. I have checked the publishing interface for Webhelp Pro ,which is what we use and all the setting are correct. When I try and refresh the area I get the Unable to get area list from server. We can get to the projects as if what we are using Webhelp. We would use regular Webhelp but that does us no good because then there is no reporting features because it is not running through the engine.
When I go though the Web Admin Interface and try to look at the project section we get an Server is refreshing project data, try again later. This is the same error we have received all day. I'm now stuck and don't know what to do or try. Between my IT dept and myself we tried everything we can think of.
Just another tidbit so it can be ruled out. I have applied the patch to my copy of RoboHelp 8.0.2 patch. And since I'm the only developer right now, that should not be the issue.
I have not tried to delete the project form the server, because
a. I can't see them in the projects pane so I can't delete them and
b. I cannot connect to the server to re-publish them.
Any advise in the matter would be greatly appreciated.
Thanks,
Ian

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

Similar Messages

RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

Hello,
We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
Thanks

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

That is usually caused by a missing unpack directive (<em:unpack>true</em:unpack>) in the file install.rdf of that extension.
See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
-----

Displays blank page when tried to access ORACLE Application Server Control

Hi,
I have successfully installed the Oracle SOA Suite using advance installation.
But when tried to open ORACLE APPLICATION SERVER CONTROL by following the below path.
start-> programs-> oracle-soa->ORACLE APPLICATION SERVER CONTROL, It displays a blank IE page.
But when tried to open BPEL control or WSM control or ESB control, it takes me to the login page.
Note: Started the SOA suite and the status of ASG component in the Start SOA page says Down.Does this affect in anyways?
Would appreciate if anyone could throw some light on this.

Hi All,
I started reinstalling SOA suite and while installation, I encounter below warning.
"A DHCP configuration was detected on this host" The installer also detected that the localhost name and network hostname differ. please resolve the networking issues by reffering the "Installing on DHCP computers" section in the installation guide."
Note: Doing installation in the server.
Wondering this could be the cause for displaying blank Application Server Control page.
And here is, what it says in the installation guide.
Note this limitation when running Oracle Application Server on DHCP computers: Oracle Application Server instances on DHCP computers cannot communicate with other instances running on other computers. For example, you cannot have OracleAS Infrastructure on one computer and a middle tier on another computer if any one of those computers uses DHCP. All the instances that need to communicate with each other need to run on the same computer. There are no limitations on clients: clients from other computers can access the instances running on the DHCP computer, as long as the client computer can resolve the DHCP computer on the network.
The solution for this is installing loopback adapter. But the catch is, I have few webmethods running on the server. Wondering about the effects of Loop back adadpter on webmethods. Please someone throw some light.
Regards
jude.

AR Invoice Printing Blank page when printed through printer

Hi,
I customized AR invoice to give PDF output through BI Publisher.There is no issue when tried to view the output.
When tried to print the output through printer, It's given blank page.
All other BI publisher reports which will give PDF output in Straight single request are printing through printer correctly.
But AR invoice By standard program itself when fired, First a Multi Language Function will fire which will have output of 0 bytes and after that as a child request Original program with Required output will fire.
It seems that printer is printing Parent request output.
Can anyone please help me regarding this.
Thanks in advance,
Best Regards,
Mahesh

Hi,
I'm guessing the concurrent program is outputting text (character mode) as opposed to PDF?
This could be a number of reasons:
1. Printer driver issue, e.g. the number of lines printed on the page is more than is defined for the printer driver: Try reducing the "Rows" on the current program definition
2. Printer PRT issue, extra page break could be being inserted.
3. The "box" in the report definition containing the address could be being expanding due to the extra address line, but not enough space so it forces a new page to be printed.
Gareth
Blog: http://garethroberts.blogspot.com
Web: http://www.virtuate.com

Playback is intermittent from my iPad when going through the stereo

This happens even when I directly connect to the receiver (Denon 1713) via USB port. It does not happen when playing music through the iPad speaker, and it does not happen when playing other audio, such as streaming netflix or Pandora. It is definitely an issue of communication between the iPad and the receiver. Any thoughts?

From pp. 78-79 of the iPad User Manual:

Macbook Pro Retina (July 2014) will not register TOUCH events when going through the AIR DEBUG LAUNCHER for MOBILE

I recently purchased a MACBOOK PRO with a retina screen and have started to transition to it as a primary work computer.
I have a game that is built on another Macbook Pro (non retina) that works fine in the AIR debug launcher for mobile but when I launch it from the RETINA device, the touch events seem to not register correctly.
Has anyone else experienced this issue?

To further clarify, it appears the touch simulator is cutting everything in half, maybe because of the pixel density?

HT1212 I am trying to restore my ipad (disabled and connect to itunes), but when going through the steps, it's asking me for my passcode. I can't put that in because it's disbled. This is the WORST product and product instructions I have ever dealt with

My ipad is disabled and it tells me to connect to itunes. However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled. I am ready to throw this iPad out the window. Wll never buy another one.

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost

IPad2 still showing iTunes even when going through the restore iPad button

Even after clicking on restore iPad I am still getting the following:
The iPad "iPad" could not be restored. An unknown error has occurred (1).
Any help would be appreciated.

http://support.apple.com/kb/TS3694#1
https://discussions.apple.com/thread/3393959?tstart=0
more
https://www.google.dk/webhp?sourceid=chrome-instant&ion=1&espv=2&es_th=1&ie=UTF- 8#q=ipad%20restore%20error%201

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

I just purchased photoshop elements and went to retrieve my serial code. The web page provided to retrieve it loads blank, even when clicking on the URL through adobe's web site. I can not install my product without this. Please help

Drusso77 if you are continuing to face difficulties locating your serial number then please see Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html. You are also welcome to contact our support team at http://adobe.ly/1aYjbSC.

When I try to upload a file it goes through the correct proceedure, but does not change the remote file i.e.Index.htm

Hi
I have an uploading problem to the server. The problem is when I try to upload a file it goes through the correct proceedure,
but does not change the remote file i.e.Index.htm, or three stages1.htm.
My Localroot folder is C:\Gods Plan Web\
The site map layout is C:\Gods Plan Web\Index.htm
The folder for the remote site is /public_html/
Should the local root folder mirror the remote site, i.e./public_html/
if this is so, what should I put into the
(a) Local Root Folder box?
(b) site map layout box?
The FTP is performing well other than changing the intended file.

You should be uploading only the contents of your local root to the public_html folder (remote root).
The index.html you use as your site's home page needs to be in your site root. If you look at your Files window in DW, you should have something like the following...
Site - Whatever you named your site
     index.html
     images
     pages
          page1.html
          page2.html
If you have any folder between Site - and the index.html page, like...
Site - Whatever you named your site
     mywebsite
          index.html
It will upload to the public_html while still in that folder, so to find your page online, you would need to type something like...
www.mydomain.com/mywebsite
public_html should NOT appear within your local files and if it existed there, would cause a redundancy if uploaded. You would need to type www.yourdomain.com/public_html to see the uploaded pages.
If you could post a screen shot of your expanded Files window while connected to the server (just connect and click the Expand button in Files, don't drill down into any of the directories), we may be able to see the issue.

Blank PAge when Launching WEB IC from Portal--Very Urgent

Hi,
We are using CRM 5.0 EIC scenario
We have just configured new application server (adding one more to existing servers), when we lauch EIC (interaction centre) from this new server, it shows nothing, it just displays blank page,
Need very very urgently
MAx points would be awarded
R

In CRM 5.0 does t-code CRM_IC launch the page for you correctly? if yes then I think you need to have your portal admin check this as it would seem portal related.

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted!

I tried to install yosemite yesterday and my computer goes through the whole installation process and then to a blank white screen. I've rebooted, I've reinstalled several times and get the same result. Two days wasted and I can't use my computer!!

I don't know if you've already resolved your problem, but I had the same thing, it took me 6 hours to fix it. I had the exact same as you, installed the update and then it went to a white screen. After trying start up holding down cmmd r or holding down the alt key to try to install it again, nothing worked, same result every time. Then an angel came to me here somewhere but I can't find it now to thank him. Start in safe mode, press shift once you hear the start up chime and hold it down until you hear it again. Installation completion box came up and it was working. turn off computer and start up again normally and all is well. Except my final cut pro x doesn't work with it, have to update that now too. same as when I updated to mavericks.
Hope this helps.

Blank page when logging on to deployed webshop...

Hi all,
I have an ISA b2b-aplication that works just fine.
The problem is that when I deploy a new b2b-applikation based on the same XCM settings as the working b2b-app. from Developer Studio and try to logon I only get a blank page...
The application log reads as follows:
<b>#0#0#Error#1#com.sap.ei.cmpserver.servlet.CmpConfig#Plain###Error getting USER_KEY configuration from XCM#
#1.5#000C297CD9AD003E0000000200000E98000411AF66A05CA3#1145344945759#/Applications/CRM_SAF/CMP#sap.com/crm.saf.compile#com.sap.ei.cmpserver.servlet.CmpConfig#Administrator#10####15dbbcf1ceac11da872d000c297cd9ad#SAPEngine_Application_Thread[impl:3]_33##0#0#Info#1#com.sap.ei.cmpserver.servlet.CmpConfig#Plain###java.lang.IllegalArgumentException: hexUtil.bad
     at com.sapmarkets.isa.core.util.HexUtil.convert(HexUtil.java:135)
     at com.sapmarkets.isa.core.security.PasswordEncrypt.decryptStringAsHex(PasswordEncrypt.java:111)
     at com.sapmarkets.isa.core.security.SecureStore.retrieve(SecureStore.java:115)
     at com.sap.ei.cmpserver.servlet.CmpConfig.getXCMConfig(CmpConfig.java:54)
     at com.sap.ei.cmpserver.servlet.CmpConfig.getConfigProperties(CmpConfig.java:31)
     at com.sap.ei.cmpserver.servlet.ListenerServlet.getConfigProperties(ListenerServlet.java:131)
     at com.sap.ei.cmpserver.servlet.ListenerServlet.init(ListenerServlet.java:60)
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:59)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:379)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:136)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:376)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
#</b>
and the XCM log:
<b>
Apr 19, 2006 11:42:17 AM,424 SAPEngine_Application_Thread[impl:3]_31   Error CRM Interaction Center WebClient.com.sapmarkets.isa.core.security.SecureStore [undefined|error.retrieve.securestore] ???en.error.retrieve.securestore???
com.sap.security.core.server.securestorage.exception.ObjectRetrievalException: Could not find clientID
     at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.getClientsStorageLocation(RemoteSecureStorageClientContextImpl.java:230)
     at com.sap.security.core.server.securestorage.remote.RemoteSecureStorageClientContextImpl.retrieveObject(RemoteSecureStorageClientContextImpl.java:713)
     at com.sapmarkets.isa.core.security.SecurityUtil.getFromSecureStorage(SecurityUtil.java:192)
     at com.sapmarkets.isa.core.security.SecureStore.retrieve(SecureStore.java:102)
     at com.sap.ic.utils.configuration.Configuration.init(Configuration.java:101)
     at com.sap.ic.icserver.servlet.DispatcherServlet.init(DispatcherServlet.java:40)
     at javax.servlet.GenericServlet.init(GenericServlet.java:258)
     at com.sap.engine.services.servlets_jsp.server.security.PrivilegedActionImpl.run(PrivilegedActionImpl.java:59)
     at java.security.AccessController.doPrivileged(Native Method)
     at javax.security.auth.Subject.doAs(Subject.java:379)
     at com.sap.engine.services.servlets_jsp.server.runtime.context.WebComponents.addServlet(WebComponents.java:136)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.loadServlets(ApplicationThreadInitializer.java:376)
     at com.sap.engine.services.servlets_jsp.server.container.ApplicationThreadInitializer.run(ApplicationThreadInitializer.java:110)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
</b>
Now I've read the threads about this problem in the forum but no luck so far... I just think it's strange that one app. works and a copy of it doesn't... I've also tried to make a new b2b-app. from scratch and still no luck...
Can anybody help me out?
Thanks in advance
Michael

Hi ,
Thanks for joining the Community.
Have you tried clearing your web browsers cache or using a different browser?
Thanks
James

RoboHelp Server 8 Displays Blank Page When Going through the Engine

Similar Messages

Maybe you are looking for