RoboHelp Server 8 Not Displaying All TOCs When Going through the Engine

Hello,
We recently upgraded from X5 to X8 and imported and converted our X5 project to X8 without any problems. After our conversion, we are having TOC issues.
Here is our issue. Not all of our TOCs are displaying when we veiw our project through the engine, but if we view the project directly (without) going through the engine all of our TOCs display correctly. I've tried creating a new TOC and checking the Copy existing Table of Content box and deleting the old TOC and that did not work. I removed the following characters in the TOC (&, <, >,) and that did not work. I also tried deleting a book with topic pages within the book and re-creating the book and adding the topic pages in the book and no solution. It seems like i've tried everything to resolve our issue and nothing has worked so far.Our books have topic pages linked to it.
I've searched the forums and i have not seen anyone else with the same issue. Any help would be greatly appreciated.
Thanks

Hi Ian,
Just zip them up and send them to me in a private message.
Tulika.

Similar Messages

  • RoboHelp Server 8 Displays Blank Page When Going through the Engine

    Here is my issue.
    I have 6 projects between 2 areas on our RoboHelp Server 8.  I have
    never had any problems publishing to the server, our IT department had no problems setting up the server including
    installing Tomcat.  We've changed the port so it would run on the default http port 80.  Everything was running smoothly until this morning.  When we go to the link that is used to run through the engine (i.e. http://server name:port/robohelp/server?prj=project name&area=areaname), instead of the redirecting page that we normally get, we get a blank white page that shows done in the status bar.  Our IT department has tried to restart the server, did not fix the problem, they tried to restart the services (i.e. Tomcat and the RoboEngine), did not fix the problem.  I have tried to connect to the server through the RoboHelp development interface and I get an Connection to Server Failed error.  I have checked the publishing interface for Webhelp Pro ,which is what we use and all the setting are correct.  When I try and refresh the area I get the Unable to get area list from server.  We can get to the projects as if what we are using Webhelp.  We would use regular Webhelp but that does us no good because then there is no reporting features because it is not running through the engine.
    When I go though the Web Admin Interface and try to look at the project section we get an Server is refreshing project data, try again later.  This is the same error we have received all day.    I'm now stuck and don't know what to do or try.  Between my IT dept and myself we tried everything we can think of.
    Just another tidbit so it can be ruled out.  I have applied the patch to my copy of RoboHelp 8.0.2 patch.  And since I'm the only developer right now, that should not be the issue.
    I have not tried to delete the project form the server, because
    a. I can't see them in the projects pane so I can't delete them and
    b. I cannot connect to the server to re-publish them.
    Any advise in the matter would be greatly appreciated.
    Thanks,
    Ian

    Hi Ian,
    Just zip them up and send them to me in a private message.
    Tulika.

  • Macbook Pro Retina (July 2014) will not register TOUCH events when going through the AIR DEBUG LAUNCHER for MOBILE

    I recently purchased a MACBOOK PRO with a retina screen and have started to transition to it as a primary work computer.
    I have a game that is built on another Macbook Pro (non retina) that works fine in the AIR debug launcher for mobile but when I launch it from the RETINA device, the touch events seem to not register correctly.
    Has anyone else experienced this issue?

    To further clarify, it appears the touch simulator is cutting everything in half, maybe because of the pixel density?

  • Query not displaying all records when execute it first tme

    Hello,
    i have an issue with the WEBI report.when i run  the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
    Could any one tell me why it's not displaying all records when i execute first time.
    Thanks in advance for your help.
    Regards,
    Prathap

    Which BOBJ version do you use?
    Which kind of data source are you retrieving data from?
    Regards,
    Stratos

  • My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    My iphone 5 is in disabled status but when going through the recovery process it asks for the SIM pin but I cannot access the screen as the phone wont connect to the activation server not the screen to unlock the SIM. What do I do?

    That's usually a symptom of a phone that was hacked or jailbroken to unlock it.

  • When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    When going through the download process with social monkee and getting to the point of adding it to firefox I get the following message: 'Social Monkee could not be installed because firefox cannot modify the needed file'. How can this be fixed?

    That is usually caused by a missing unpack directive (&lt;em:unpack&gt;true&lt;/em:unpack&gt;) in the file install.rdf of that extension.
    See https://developer.mozilla.org/En/Updating_extensions_for_Firefox_4.0#XPI_unpacking
    -----

  • SSAS Date Dimension attribute not displaying all members when browsed singly

    I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
    There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
    I am connecting to the cube via Microsot EXCEL
    Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
    data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
    The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
    Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
    When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
    I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
    I have also verified that this issue is still there if i try to browse the cube from the SSMS.
    Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
    Thanks 
    Suvrat

    Thanks for your response Muthukumaran.
    I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
    I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
    users connect to the cube via excel, they will have to configure this property.
    I would like to share the way i resolved this issue:
    I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
    for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
    this once the Date Dimension was processed full.
    Thanks
    Suvrat Rai

  • Menu toolbar icons not displayed in colour when deployed on the Web

    Hello!
    We are developing an application using Forms6i on Windows NT.
    Our problem is that menu toolbar icons are not displayed in colour when the application is deployed on the Web using lookAndFeel = generic. This is the case both when using Microsoft IE5 and Netscape 4.5. When lookAndFeel = oracle, however, the icons are displayed in colour.
    The icons are stored as *.gif files in the same directory as the application *.html file. It does not help to create a virtual path /web_icons/ in the www listener and edit the parameter default.icons.iconpath in the file Registry.dat.
    When running the application as client/server, the menu toolbar icons are displayed in colour as expected.
    Any ideas on how to solve this problem?
    Regards,
    Kjell Pedersen
    Nera SatCom AS
    Norway
    null

    Hi,
    I got the same problem and I didn't figure out, how to solve this problem.
    But did you try to printout the form anyway? I guess you will see the icons on the printout, won't you?
    Regards
    Dirk

  • PDFs not displaying text properly when going Mac- PC

    We have a serious issue all of a sudden where AI files using Futura being converted to PDF are NOT showing up properly when viewed on PCs. This user is running 10.4.11, CS3 and Font Reserve. When she exports to PDF, random letters will be missing from the PDF file. This cost us a LOT of money last week when a file was sent out for printing. If they convert the fonts to outline prior, it works fine.
    We didn't have this issue, ever, until the last week or so. As far as any of us know, NOTHING has changed in our environment.
    I also had the user try to run the AI file through Distiller instead of "Save As PDF0", and it just errors out each time.
    Any ideas?? Font issues are by far my biggest weakness, so it's a royal pain for me to figure out. Although, I don't even know if this is a font issue or not. Help!

    >They are just using export to PDF for the files.
    From what program? No version of illustrator can "Export" to PDF. They all Save to PDF. This is more than an issue of semantics. If someone says they are "exporting" to PDF they might not be using Illustrator. An Illustrator user would not refer to "exporting" PDFs because that's not something they can do.

  • Higher Education cess not displayed in J2I6 when posted through J1IH

    Hi,
    We have passed an Excise JV through J1IH.
    BED, ECess and HECess accounts are credited and Excise Duty paid A/c is debited.
    All the values are posted properly. We have also checked the accounting document for this.
    But when we run the report J2I6 (after J2I5), HEcess value is not showing, where as all other values are displayed properly.
    Where may be the problem?
    Is there any SAP Note we need to apply?
    Regards,

    HI,
    There is no relation ship between your tax procedure (eg: TAXINN) and withholding tax confirguration.  Please check the does the higher education cess is getting posted or not when you post FI invoice.  If it's fine, it should post when you do MIRO.
    Withholding tax will not be posted when you do MIGO, it will be posted when you do MIRO only.
    Please use the same vendor for FI & MM invoices posting.  If still there is any issue in higher education cess posting - please check withholding tax configuration.
    Regards,
    Kiran Yelamarthy

  • Playback is intermittent from my iPad when going through the stereo

    This happens even when I directly connect to the receiver (Denon 1713) via USB port.  It does not happen when playing music through the iPad speaker, and it does not happen when playing other audio, such as streaming netflix or Pandora.  It is definitely an issue of communication between the iPad and the receiver.  Any thoughts?

    From pp. 78-79 of the iPad User Manual:

  • Keynote not displaying all text when projecting

    updated to the new keynote on my iPad mini. Now all of the text doesn't display (particularly when using the build feature).

    Try asking in the Keynote for iOS discussion, this discussion is dedicated to Mac users:
    Keynote for iOS

  • List column drop down not displaying all choices when user has read permissions

    One of my co-workers created a workflow with an associated list. I gave a user read permissions to the list but they cannot view or filter all of the choices from a column.  For example the column is named STATUS and has 4 choices, COMPLETED, CANCELED,
    IN-PROGRESS and NOT STARTED but the user is only able to view the COMPLETED items.

    Hi brianti,
    For troubleshooting this issue, please provide the followings:
    Could other user with full control see all items?
    How did you create the list? I am wondering whether you enabled Content Approval in the list. If yes, please go to List settings->Versioning settings, select "Any user who can read items" under "Who should see draft items in this
    list? ".
    How did your co-worker create the workflow? Please provide the actions that your co-worker used in the workflow.
    If you provide the above, it will make others in the forum easy to find a solution for you.
    Best Regards,
    Wendy
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Not displaying all ip addresses connected to the network

    import java.io.*;
    import java.net.*;
    import java.util.*;
    import static java.lang.System.out;
    public class ListNets
    public static void main(String args[]) throws SocketException {
    Enumeration<NetworkInterface> nets = NetworkInterface.getNetworkInterfaces();
    for (NetworkInterface netint : Collections.list(nets))
    displayInterfaceInformation(netint);
    static void displayInterfaceInformation(NetworkInterface netint) throws SocketException {
    Enumeration<InetAddress> inetAddresses = netint.getInetAddresses();
    while(inetAddresses.hasMoreElements()==true)
    System.out.println(inetAddresses.nextElement());
    The output of this code gives only the ip of the computer im working on the network :192.168.1.101 and the local ip 127.0.0.1
    although there are other computers connected to the netwrok .. i need to get all the ips connected including the ip of the router so if any 1 can please help me
    Bookmark Post in Technorati
    Reply With Quote

    There is no general way to do what you want to do, which is sometimes called host discovery. Look at the design of port scanners such as nmap (insecure.org) to see how hard it can be. It is even harder in Java because you don't have raw sockets, so you can't send ICMP packets to see who responds. If you read carefully the discussion surrounding the options to nmap to do host discovery using UDP and TCP you may get some ideas that will work for your network.

  • HT1212 I am trying to restore my ipad (disabled and connect to itunes), but when going through the steps, it's asking me for my passcode.  I can't put that in because it's disbled.  This is the WORST product and product instructions I have ever dealt with

    My ipad is disabled and it tells me to connect to itunes.  However, once I've connected to iTUNES, it ask me for my passcode and of course, I can't put that in because my ipad is disabled.  I am ready to throw this iPad out the window.  Wll never buy another one.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

Maybe you are looking for