Robohelp Special characters

Hello,
We were using Robo Help 2.0 version and I have recently Migrated the help pages to Robo Help 8.0 version.
We are able to see the help pages from our application but for few pages we are not seeing any data, it is showing error message (http status 404 error).
I investigated the issue and find out we are using the "&" in the HTML page name for displaying the help pages. Since "&" is a special character that is the reason it is not showing the data in the RoboHelp.
I renamed the page and removed the "&" from the name of the HTML page and also modified the Map Id and published the project but I am still not able to fix the issue.
We are passing the ctxid=hlp_Recovery_Referral_Investigation. Could you please help me what are the other things we need to do after making the changes in the html file name?
Kindly help me to fix this issue.
Thanks
Mahesh Prajapati

See the ZoomSearch page on my site.
Sorry to give such a short answer but I think it is the right one.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

RH7: Corrupted Special Characters in TOC, Glossary, Favorites, etc.

When I generate a .chm from a Japanese, Polish, Russian or
Chinese RoboHelp 7 HTML Help, the special characters are corrupted
on the .chm file’s Contents, Search, Favorites, and Glossary
tabs as well in the HTML Help window's title bar.
For instance the Russian topic title
“Использование
приложения”
is shown approximately as
“Éñïîëücîâàíèå
ïdéëîæåíèèÿ”
on the TOC tab, making it useless for navigation purposes.
The fonts were initially also corrupted on the TOC inside the
RH7 project itself until I added charset=UTF-8 info in the
head/meta of the hhc files. However, there's still no joy when I
generate HTML Help output.
I found a reference to someone with a similar problem with a
RH7 Web help project where the solution was to add UTF-8 BOM to the
very beginning of the files. Have tried adding UTF-8 BOM to the hhc
or xpj files, using both Notepad and Dreamweaver, but with no
result. Someone also recommended the installation of the required
language packs – I tried, but again without improvement.
Have you experienced something similar and found a solution,
please share your knowledge with me.

I'm no expert in this area but I am beginning to acquire some
knowledge of the problems in this area.
First question is, I believe, are you using a unicode font?
It might be worth trying something such as Arial Unicode.
I believe the BOM stuff is relevant only to webhelp.
If changing the font does not work. Please contact me direct
via my website.

Is it possible to search for strings containing spaces and special characters?

In our RoboHelp project, there are figures with text labels such as Figure 1, Figure 3-2, etc.
When I search for "Figure 3" I get all pages containing "Figure" and "3", even if I surround it in quotes. Similarly, searching for "3-2" treats the '-' character as a space and searches for all pages containing '3' or '2'.
Is there a way to search for strings containing spaces and special characters?

In that case I think the answer is no if you are using the standard search engine. However I believe that Zoom Search does allow this type of searching. Check out this link for further information.
http://www.grainge.org/pages/authoring/zoomsearch/zoomsearch.htm
The RoboColum(n)
@robocolumn
Colum McAndrew

RH10 WebHelp includes special characters in 508 compliant search

I am converting a RoboHelp 5 WebHelp project to RoboHelp 10 WebHelp and the project uses 508 compliant output. When I click on the search tab I see special characters like $, %, !, #, etc. showing up as search words. I have tried adding the characters to the Stop Words list and generating the output again but the special characters still show up. Is there a way to suppress these characters from showing up in search? The characters do not show up in the RoboHelp 5 508 output. I am using IE8.

Hi there
Section 508 deals with accessibility. This means screen readers for blind or visually impaired individuals. They mouse over areas and the screen reader reads back to them what the mouse is hovering. So instead of a field where you type, they navigate search in a different manner. By clicking links that eventually lead to the term.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

XML Publisher report not printing excel output due to special characters

Hello,
I am trying to create a xml publisher report which should display the output in excel. But the program completes with a warning status and the output is displayed as XML instead of excel, with some errors "An invalid character was found in text content. Error processing resource " and i think these errors are due to the special characters(eg: city/province - A Coruña, Cáceres). If i give rownum < 10 in my query, where there are no such characters it works fine and i am getting an excel output.
Tried changing the XML encoding and it doesn't help (both mentioned below)
<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml version="1.0" encoding="UTF-8"?>
Do anyone have a solution for this
Thanks in advance
Edited by: user10317098 on Jan 16, 2012 10:58 AM

Hi,
Check this links that might help you..
https://forums.oracle.com/thread/1018488
http://docs.oracle.com/cd/E10091_01/doc/bip.1013/e05000/toc.htm
Here the Exact solution from Oracle
In the XML PUBLISHER ADMINISTRATOR Resp..
Click the administration..
then Click HTML Output
Then in the Base Image URI Give the url of your application for example
http://Test.Test.com:8000/OA_MEDIA/
And then
Image File Directory give this as per your application setup
/u01/app/oracle/apps/apps_st/comn/java/classes/oracle/apps/media/
Thanks & Regards
Srikkanth.M

How to print Special Characters in Sap-Scripts

How to print Special Characters in Sap-Scripts
Thanks,
Ravi

Hi
if u want print special characters we can use hot codes i.e ' ' (single inverted commas). in between these hot codes insert u r special characters.
write ' !@#$%^&*( ) '.
for the above write statement output is
output is !@#$%^&*( )

Special characters into datagrid through the use of buttons

Hi!
I have a datagrid for word input, I'm trying to create a "special characters" panel, kind of like google's new "virtual keyboard" thing on google.com, so that the user can enter data into the datagrid cells using characters that aren't on their keyboards.
I manage to do this just fine, using the solution below. I know this is probably not the best/most effective way to do this, so any suggestions for making the code better will be appreciated. I only started using Flex a month ago.
grid.addEventListener(DataGridEvent.ITEM_EDIT_BEGIN, selectColumn)
function selectColumn(event:DataGridEvent):void
var selectedColumn:DataGridColumn = grid.columns[event.columnIndex];
selCol = selectedColumn.dataField;
//The function for adding a special character to the selected datagrid column by clicking a button:
//(inputWordArray is the dataprovider for the grid called "grid" )
protected function clickSomeButton(event:MouseEvent):void
var colIndex:int = new int;
if (selCol == "from"){
inputWordArray[grid.selectedIndex].from = inputWordArray[grid.selectedIndex].from + "æ";
colIndex = 0;
else if (selCol == "to"){
colIndex = 1;
inputWordArray[grid.selectedIndex].to = inputWordArray[grid.selectedIndex].to + "æ";
inputWordArray.refresh();
grid.dispatchEvent(new DataGridEvent(DataGridEvent.ITEM_EDIT_BEGINNING, false, false, colIndex, null, grid.selectedIndex));
The problem is that this only adds a letter at the end of the selected item's value, not at a specific position within the word specified by the position of the cursor. This is what I need to achieve. I have no idea even what to search for, if anyone could please give me a hint that'd be great.

You will probably need to capture the editor's selectionBeginIndex and
selectionEndIndex

FindNode returning Null And XML Not Accepting Special Characters

Hi All,
i am trying the get the attribute value in the element "ns4:InfoCFDi" using FindNode method, but the method is returning NULL. I used the same code for other sample as well and was successfull. but for this specific XML file(which is below) I am getting a Null.
i can get till S:Body, but when i try to use FindNode for ":Body/s4:ResponseGeneraCFDi" I get Null value.
And I used "S:Body/*[local-name()=" | "ns4:ResponseGeneraCFDi" | "]";
as mentioned in other post but still no success.
==>I Have one more question relating to special characters. I need to use characters such as - ó in my XML to read as well as write. When I try to read i am getting XML parse error and when writing, i cannot open the file properly.
Your help is much appreciated.
My code is here:
Local XmlDoc &inXMLDoc, &reqxmldoc;
Local XmlNode &RecordNode;
&inXMLDoc = CreateXmlDoc();
&ret = &inXMLDoc.ParseXmlFromURL("D:\Agnel\Mexico Debit Memo\REALRESPONSE.xml");
If &ret Then
&RecordNode = &inXMLDoc.DocumentElement.FindNode("" );
If &RecordNode.IsNull Then
Warning MsgGet(0, 0, "Agnel FindNode not found.");
rem MessageBox(0, "", 0, 0, "FindNode not found");
Else
&qrValue = &RecordNode.GetAttributeValue("asignaFolio ");
Warning MsgGet(0, 0, "asignaFolio." | &qrValue);
End-If;
Else
Warning MsgGet(0, 0, "Error. ParseXmlString");
End-If;
XML File:
- <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
- <S:Body>
- <ns4:ResponseGeneraCFDi xmlns="http://www.xxl.com/ns/xsd/bf/rxx/52" xmlns:ns2="http://www.sat.gob.mx/cfd/3" xmlns:ns3="http://www.xx/ns/bf/conector/1&quo t; xmlns:ns4="http://www.xx/ns/xsd/bfxx/xx/32&qu ot; xmlns:ns5="http://www.xxcom/ns/xsd/bf/xxxxx&q uot; xmlns:ns6="http://wwwxx.com/ns/referenceID/v1">
- <ns3:Result version="1">
<ns3:Message message="Proceso realizado con exito." code="0" />
</ns3:Result>
- <ns4:InfoCFDi noCertificadoSAT="20001000000100003992" refId="STORFAC20121022085611" fechaTimbrado="2012-10-22T08:56:45" qr=" "
uuid="a37a7d92-a17e-49f4-8e4d-51c983587acb" version="3.2" tipo="XML" archivo="xxx" sello="B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=" fecha="2012-10-22T08:56:44" folio="281" serie="IICC">
<InfoEspecial valor="Este documento es una representacin impresa de un CFDI." atributo="leyendaImpresion" />
<InfoEspecial valor="||1.0|a37a7d92-a17e-49f4-8e4d-51c983587acb|2012-10-22T08:56:45|B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=|20001000000100003992||" atributo="cadenaOriginal" />
<InfoEspecial valor="Doscientos dieciocho mil cuatrocientos setenta y cinco pesos 00/100 M.N." atributo="totalConLetra" />
</ns4:InfoCFDi>
</ns4:ResponseGeneraCFDi>
</S:Body>
</S:Envelope>
TIA

First of all you have to supply a value you want to search for and this has to be the complete path to the value. You're saying you already tried that, but can you paste the code which you used for that? I don't see the path mentioned in the code you posted.
*FindNode*
Syntax
FindNode(Path)
Description
Use the FindNode method to return a reference to an XmlNode.
The path is specified as the list of tag names, to the node that you want to find, each separated by a slash (/).
Parameters
Path
Specify the tag names up to and including the name of the node that you want returned, starting with a slash and each separated by a slash (/). This is known as the XPath query language.>
Another option would be this snippet of code:
&InfoCFDiArray = GetElementsByTagName("ns4:InfoCFDi");
&InfoCFDiNode = &InfoCFDiArray [1];
&attValue = &InfoCFDiNode.GetAttributeValue("noCertificadoSAT")
Warning(&attValue);
It creates an array of XML Nodes which match the name "ns4:InfoCFDi". Since there's only one in the XML it's safe to assume it will be the one and only node in the array. I've assigned that node to the variable &InfoCFDiNode and use that to retrieve the attribute "noCertificadoSAT" value. The warning message should display the value supplied there.
Concering the special characters; you will have to change the encoding of the XML. Peoplecode sets this to UTF-8 by default, but doesn't include this in the header. There's a little hack for that somewhere on the web, I'll see if I can find it.

How do I use a font variation in a pages document. I no longer have the "viewer" -glyph option in special characters pane only new mbPro with Lion. I know the variation is available because I can see it in the font book. so now what I just want to be

How do I use a font variation in a pages document? or other app for that matter? I no longer have the "viewer" - glyph option in the special characters pane (under edit in toolbar). I know the varaition ia available because I can see it in my font book. I depended on that alot so I need to find a way to still use character and embellishments. I don't want to have to go back to my od computer (from2007) Please Help!

I really don't understand.
The menu item is available :
Maybe, you didn't activate the tool :
Yvan KOENIG (VALLAURIS, France) mardi 2 août 2011 23:10:17
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

Fields in Flat File are separated by special characters

hello every one,
fIf fields in Flat File are separated by special characters
and If Flat File is given in Excel sheet , how to handle this kind of issues.
to Upload data into R/3 system, in BDC.
If u have sample program ,please send it ot me and explain ?
others give me hints...

Hi,
you can use the function module ALSM_EXCEL_TO_INTERNAL_TABLE .
Check this sample code.
hi,
use the FM ALSM_EXCEL_TO_INTERNAL_TABLE.
PARAMETERS:
P_INFL like RLGRAP-FILENAME.
DATA:
BEGIN OF T_DATA1 OCCURS 0,
RESOURCE(25) TYPE C,
DATE(10) TYPE C,
DURATION TYPE P DECIMALS 2,
ACTIVITY(25) TYPE C,
B_NBILL(1) TYPE C,
END OF T_DATA1,
T_DATA TYPE ALSMEX_TABLINE OCCURS 0 WITH HEADER LINE,
BEGIN OF T_FINAL OCCURS 0,
RESOURCE(25) TYPE C,
DATE(10) TYPE C,
DURATION(15) TYPE C,
ACTIVITY(25) TYPE C,
B_NBILL(10) TYPE C,
END OF T_FINAL.
DATA : HEADER TYPE XSTRING.
Work Variables Declaration.
CONSTANTS:
W_Y TYPE C VALUE 'Y',
W_N TYPE C VALUE 'N'.
Work area.
DATA:
WA_DATA LIKE T_FINAL.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_INFL.
PERFORM GET_FILENAME CHANGING P_INFL.
START-OF-SELECTION.
PERFORM UPLOAD_DATA_FROMEXCEL.
FORM UPLOAD_DATA_FROMEXCEL.
Downloading the data from presentation server
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
FILENAME = p_infl
I_BEGIN_COL = 1
I_BEGIN_ROW = 2
I_END_COL = 8
I_END_ROW = 1000
TABLES
INTERN = T_DATA
EXCEPTIONS
INCONSISTENT_PARAMETERS = 1
UPLOAD_OLE = 2
OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " upload_data_fromexcel
*& Form process_data
text
FORM PROCESS_DATA .
T_FINAL-RESOURCE = 'Resource'.
T_FINAL-DATE = 'Date'.
T_FINAL-DURATION = 'Duration'.
T_FINAL-ACTIVITY = 'Activity'.
T_FINAL-B_NBILL = 'Billable'.
APPEND T_FINAL.
SORT T_DATA BY ROW COL.
LOOP AT T_DATA.
CASE T_DATA-COL.
WHEN 3.
T_DATA1-RESOURCE = T_DATA-VALUE.
WHEN 4.
T_DATA1-DATE = T_DATA-VALUE.
WHEN 5.
T_DATA1-DURATION = T_DATA-VALUE.
WHEN 6.
t_data1-activity = t_data-value.
WHEN 7.
T_DATA1-B_NBILL = T_DATA-VALUE.
ENDCASE.
AT END OF ROW.
COLLECT T_DATA1.
ENDAT.
ENDLOOP.
LOOP AT T_DATA1.
T_FINAL-RESOURCE = T_DATA1-RESOURCE.
T_FINAL-DATE = T_DATA1-DATE.
T_FINAL-DURATION = T_DATA1-DURATION.
T_FINAL-ACTIVITY = T_DATA1-ACTIVITY.
T_FINAL-B_NBILL = T_DATA1-B_NBILL.
APPEND T_FINAL.
ENDLOOP.
ENDFORM. " process_data
*& Form get_filename
FORM GET_FILENAME CHANGING P_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = SPACE
DEF_PATH = P_FILENAME
MASK = ',. ,..'
MODE = 'O' " O = Open, S = Save
TITLE = BOX_TITLE
IMPORTING
FILENAME = P_FILENAME
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
CASE SY-SUBRC.
WHEN 1.
MESSAGE I999 WITH
'File selector not available on this windows system'(046).
WHEN 2.
MESSAGE E999 WITH
'Frontend function cannot be executed in background'(047).
WHEN 3.
MESSAGE I999 WITH 'Selection was cancelled'(048).
WHEN 4.
MESSAGE E999 WITH 'Communication error'(049).
WHEN 5.
MESSAGE E999 WITH 'Other error'(050).
ENDCASE.
ENDFORM. " get_filename
Kindly Reward points if you found the reply helpful.
Cheers,
CHAITANYA.

Need help in using replace function with special characters

I have a column in a table where the data can contain ascii code for special characters such as an apostrophe.
The data looks like this:
CREEK'S LANE
ie for a street named CREEK'S LANE.
I want to replace the ascii representation with the apostrophe and have the returned data show up as: CREEK's LANE
When I try the query below I get prompted for substitution variable value.
I don't seem to be able to find the right syntax to make this query work.
SELECT REPLACE (street_name, ''', '''')
FROM
streets WHERE street_id = 1
Does anybody know how to do this?
Any help would be much appreciated.
Thanks.
George

george91 wrote:
I have a column in a table where the data can contain ascii code for special characters such as an apostrophe.
The data looks like this:
CREEK'S LANE
ie for a street named CREEK'S LANE.
I want to replace the ascii representation with the apostrophe and have the returned data show up as: CREEK's LANE
When I try the query below I get prompted for substitution variable value.
I don't seem to be able to find the right syntax to make this query work.
SELECT REPLACE (street_name, ''', '''')
FROM
streets WHERE street_id = 1
Does anybody know how to do this?
Any help would be much appreciated.
Thanks.
GeorgeHa! The codes you specified rendered in the HTML, but showed properly when I listed your original posting above. I didn't understand what you meant initially because the 5-character string represenation got rendered as the quote that you said you weren't able to get - a display problem.
You're getting prompted for the substituon variable because of the ampersand; you appear to be doing this in SQL*PLUS. The first thing I would try is to SET DEFINE OFF when using the ampersands to see if that works. If That doesn't work check the docs to delmit the ampersand (I think its a backslash before it but can't remember offhand). Another, harder option might be to use the TRANSLATE function replacing the literal character instead of using REPLACE (though replacing a quote will be a little tricky). If you're on 10g also consider using the advanced quoting
Good luck!
Edited by: riedelme on May 22, 2009 12:45 PM

Displaying special characters in ALV report.

Hi Experts,
Can we display special characters in ALV reports? Special characters such as tick mark.(Like in character map(Font Bookshelf Symbol 7) of windows ).
I tried with icons in ALV report, I was able to display tick icon in the ALV report, but when we export the report in to a excel, the icons comes in as Hexadecimal code.
Can any we display special characters like tick in ALV report or display the icons in excel aswell?
I will be gratefull for the <urgency reduced by moderator> response.
Regards,
Sharath.
Edited by: Thomas Zloch on May 10, 2011 10:26 AM

Sharath,
I think it is possible to do so.
Please check this link.
http://www.sapfans.com/forums/viewtopic.php?f=13&t=322569
Thanks,
Guru.

Time-dependent Vendor Master & Handling Special Characters

Hi,
I need to extract time-dependent Vendor Master.
1. The data source for 0VENDOR does not have fields to hold the valid date range.
2. Does the Master data in R/3 for Vendors will hold the valid date range?
3. The text for 0VENDOR provides time-dependent, but how to map the valid from and valid to fields?
Handling Special Characters:
We are trying to extract data from Legacy system via DB Connect. The item text field consists of special characters. Of course in BW customization we can specify all the special characters to consider. But the special character we observed is 'square' symbol i.e. 'new line character' in Oracle. We are updating this to an ODS object. When looked at error log, observed that green light for the number of records transferred and updated, but finally when it load into ODS object and activates popping up the error message saying 'could not recognize special character'.
Please help me getting the 2 issues resolved.
Thanks in advance.
Regards,
Sudhakar.

Hi Everyone,
Thanks for inputs on Special characters issue...
Finally resolved with below piece of code in the start routine:
DATA: FLAG,
 OFF TYPE I,
 LEN TYPE I VALUE 1,
 ALLOWED_CHAR(95) VALUE
'0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ`~!@#$%^&*()-_=+ ' &
'abcdefghijklmnopqrstuvwxyz:;<>,.?/|\{}[]"'''.
CONSTANTS: C_CHAR VALUE '-'.
LOOP AT DATA_PACKAGE WHERE NOT /BIC/ZI_DESC IS INITIAL .
 DO.
 IF DATA_PACKAGE-/BIC/ZI_DESC CN ALLOWED_CHAR.
 REPLACE SECTION OFFSET SY-FDPOS LENGTH LEN OF
 DATA_PACKAGE-/BIC/ZI_DESC WITH C_CHAR.
 FLAG = SPACE.
 ELSE.
 FLAG = 'X'.
 ENDIF.
 IF FLAG = 'X'.
 EXIT.
 ENDIF.
 ENDDO.
 MODIFY DATA_PACKAGE.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
I have seen the link sent by 'Eugene Khusainov' today. Thought putting my piece of code that may help others...
Regards,
Sudhakar.

Unable to call report from jsp - password contains special characters

Hi
I used the following url to call my oracle report from my JSP webpage but got the error mentioned below. It seems that this error occurs when i use the login id with password that contains special characters only. How can I overcome this problem?
Any help appreciated. Thx.
Regards,
Siti
URL used: -
"http://pc-325:8889/reports/rwservlet?server=pc-325&report=prodeff80120i&P_JDBCPDS="+vlogin1+"&destype=cache&desformat=pdf&paramform=no&p_type="+p_type;
Error encountered: -
REP-163: Invalid value for keyword DESTYPE.
Valid options are FILE, PRINTER, MAIL, INTEROFFICE, or CACHE.

Hi Stefan,
Many of the customers are located in hungary and they have created the userid using their keyboard. Hence for now I already have a userid with that hungarian characters, in the SAP system.
Only I would request for the help on how to interface these characters in SAP Business connector to call RFC.
Thanks,

Reading special characters from a flat file and inserting into DB

I'm reading data with special characters like . etc from a flat file , assigning the data to variable in my anonymous block and inserting into my DB. But the show up as inverted ? s. Any clues about how to do this?
If i try to do the insert directly it works. It seems like the error occurs when reading this data into a variable
thanks for the help
Lalit Bhatia

lalit, this is probably an character set problem, the default on Database creation tends to be 7bit Ascii which does not support special characters, it's been a while since I set up a db in this way, but you need to change settings in oracle.ini. The db will need to be restarted for this. Also, to check current settings try:
select * from NLS_DATABASE_PARAMETERS
You want an 8bit, unicode or multibyte character set. Sorry I cannot remember moer off the top of my head, try searching on NLS or character set

Robohelp Special characters

Similar Messages

Maybe you are looking for