RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

Similar Messages

Combine two reports in query designer using key figure with sap exit

Hi experts,
i want to combine two reports in query designer using key figure with sap exit
in the report 1 key figure calculation based on the open on key date(0P_DATE_OPEN)
to calculate due and not due in two columns
in report 2 key figure calculate in the time zones using given in variable Grid Width (0DPM_BV0) like due in 1 to 30 days, 31 to 60 days...the due amount based on the open on key date(0P_DATE_OPEN)
to calculate in 1-30, 31-60, 61-90, 91-120, 121-150 and >150 days in 6 columns
now i have requirement like this
not due, 1-30, 31-60, >60, due,1-30, 31-60, >60 in 8 columns
or
not due, due, 1-30, 31-60, 61-90, 91-120, 121-150 and >150 in 8 col
thank you

Hi Dirk,
you perhaps know my requirement,
for the management to make used in one report,
we have in reporting finacials Ehp3.
Vendor Due Date Analysis - which show due, not due
Vendor Overdue Analysis - show only due and analysis in time grid frame
i want to combine in one report that show NOT DUE, DUE, DUE time frames in grid.
krish...

Using Connect:Direct with SAP

Folks,
Client is using Connect:Direct to transfer the files from one location to another location.There are two table maintained namely T9AOA and T9AOB with Interface id and Unix scripting w.r.t Processing types respectively.
1.I don't think these are SAP standard tables then why they are not named starting with Z or Y
2.How to use Connect:Direct with SAP.
Searched in SDN and google but didn't get any clear information on the above.From google I came to know this is a Product of Sterling Commerce(AT&T).
Hope someone here who used Connect:Direct with SAP can share the info.
Thanks,
Kiran.

Paky,
The existing Design,had some tables which were maintained with required Unix Scripts.In the program we are just fetching that script from the table and building a Unix Command to move the files.There is also a URL using which we can check the status of the files.As I was just using the already existing design,don't have much info on how C:D connectivity can be designed from scratch.
By Googling,I was able to get some info.May be it will give you some lead.
https://www.google.co.in/?gws_rd=cr&ei=F5apUsrYCYWNrQf1y4GoDQ#q=connect+direct+in+unix
K.Kiran.

Have you used Captivate 4 with SAP?

I have tried using older versions of Captivate to create SAP demonstrations and simulations, and wasn't particularly pleased with the output. My employer is happy for me to upgrade to Captivate 4. Before I do, can anyone share their experience of using Captivate 4 with SAP?
Thanks, KristinaWasa

Hi there
I have no clue what SAP actually is. So I'm going to ask that you clarify your request a smidge.
I'm wondering if you are asking if Captivate coexists with SAP so you may record what goes on with SAP?
Or is SAP a delivery mechanism similar to or possibly even a Learning Management System (LMS) and you are asking if Captivate content is easily delivered by and communicates nicely with this system.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??

Hi experts
My question : is Adobe Interactive Forms compatible with SAP-PM in ECC 6 ??
Thanks

Hello,
I can recommend you to search sap official documents for the standard-SAP-delivered-Adobe-forms and maybe there are some for the PM module. Would that help? Or you´ve learnt Adobe yourself? Regards, Otto

How to use CMS Users with SAP BOPC NW 7.5

Hello,
I have problems importing and using CMS Users with BO PC 7.5 NW.
I am trying two types of CMS-users
1. CMS Enterprise Users created in CMS and using "Enterprise" authentication
2. SAP BW Users imported into CMS using their SAP authentication "secSAPR3")
but both don't work:
In the BOPC Admin Client, I can succesfully select Security->Users->"Add new Users". Both CMS "Enterprise Users" and CMS Users that use SAP authentication are displayed in the "Everyone" Group.
The CMS Enterprise Users are displayed as <username>, e.g. "Miller".
The CMS users with sap authentication are displayed as <SAPSystem><Client>/<SAPusername>, e.g. "KBE100/Smith".
Now If I try to import a user...
1. CMS Enterprise Users
If can successfully import CMS Enterprise Users and add them to the ADMIN Team, e.g. "Miller".
The problem is they can't be used to log in to the Admin Client and Excel Client:
E.g. I enterUser-ID "Miller" and his CMS-Enterprise-password under password after starting Excel Client, an error message shows up: "The UserID, Password or Domain cannot be authenticated. Go back and make sure you entered valid credentials" ... (same error message as if the user wouldn't exist/wrong pw.).
Seems the user wasn't added as BO PC user. Or do I need to use any prefix before the "user ID" for CMS Enterprise users in the User_ID field instead of just "Miller"?!
2. CMS Users which use SAP-authentication (users imported into CMS from BW and use SAP-authentication)
In the BO PC Admin Client, I can't import them: I go through "1. User Setup" select "KBE~100/Smith", "2. User Detail", "3. Assignments", but if I am in "4. Finish" and click on "Apply", the following error shows up:
"Failed to create directory \root\Webfolders\<AppSetName>\<Appname>" for "KBE~100/Smith".
My guess is that the operating system doesn't like the "/" in the Username - but I guess this can't be changed bc. these Users from CMS and are already displayed with the "/" between SAPSystemID~ClientNummer and username in the User-list in BOPC Admin Client!
side remark: if I create a SAP CMS Enterprise user which contains a "/" in the username (on pupose ), I am getting the same error message.
Any help, explanations and workarounds are greatly appreciated - Any solution will be awarded with maximum points!
Best Regards and thanks a lot for your help!

Hi Florian,
The problem seems indeed the file system on the bw not being able to handle "/". The automatic user import from the bw role into the CMC does not give you an option to replace the "/" character with anything else.
This should solve it:
- Go to the CMC double click the user. Delete the server part "KBE100/" and click save. Make sure the default system is set to "KBE100". The user should now be able to login from BPC with the user Smith.
Good luck,
Martin

Using Data Integrator with SAP BI 7.0

Hi,
We're currently using Data Integrator Version 11.7.2.0(using SAP ABAP adapter, BW adapter). Our primary data source is SAP R3 version 4.7 and SAP BW 3.5.
We're planning to upgrade to ECC 6.0(from SAP R3 4.7) and BI 7.0(from BW3.5).
I'm trying to determine if it will be necessary to upgrade Data Integrator also.
Can anyone tell me if Data Integrator Version 11.7.2.0 is compatible with SAP BI 7.0?
any document and advice will help us.
Thanks in advance,
Kyung Woo, Nam

Compatible? Likely.
Supported? No.
We have optimized the BW handling is DI 12.2 a lot, so do yourself a favor and upgrade to this version.

Using Data Integrator with SAP ECC 6.0

Hi,
We're currently using Data Integrator Version 11.7.2.3. Our primary data source is SAP R3 version 4.7 We're planning to upgrade to ECC 6.0.
I'm trying to determine if it will be necessary to upgrade Data Integrator also. Can anyone tell me if Data Integrator Version 11.7.2.3 is compatible with SAP ECC 6.0?
I'm sure there is a document somewhere but I have been unable to find it.
Thanks,
Mark Duff

Data Integrator 11.7.2.x is compatible with ECC6. Depending on which platform you're using, here are the documents that give this information:
[Linux|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/a00aad14-ac3e-2b10-3b85-8208305073b1&overridelayout=true]
[HP-UX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/0075f72d-ab3e-2b10-28bb-9708525a9f42&overridelayout=true]
[Solaris|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d03ba272-ac3e-2b10-9cb0-84156ef467ec&overridelayout=true]
[AIX|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/2057d8d9-a83e-2b10-a997-e4f31f730524&overridelayout=true]
[Windows|https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/d069a060-b03e-2b10-3c8c-a59f5f4d8ce3&overridelayout=true]
You should keep in mind, however, that Data Integration 11.7.x mainstream maintenence end date is June 2010. Because of that, you may want to consider upgrading to Data Services XI 3.0 or 3.1.

Using fragment library with SAP MIME repository?

Hi,
I am new here so I hope I'm posting this in the right place.
We use Adobe LiveCycle Designer as part of the SAP Interactive Forms product. We want to use the fragment library but I am unclear how that will work unless we can connect to the SAP MIME Repository.
Does anyone here have any experience with making this work?
Also ... is there any online resource (other than SAP's SDN) with specific help documentation for using LiveCycle Designer ES with SAP?
We are on SAP Netweaver 7.01 and LiveCycle Designer 8.1.
Thanks!
MAH

Hi Chintan,
Thank you for the prompt. I was going to get to it ...
Actually I did not find a way to use the fragment library with referenced objects. By 'referenced" we would mean to be able to change the object in the library and all referencing items would be updated. We did NOT find how to do that.
What we did find, that is still useful to us, and probably anyone working in a development team, is that we could create the library in a shared location and store common fragments there. To use the fragments, go to the library, drag the fragment from the library to your form layout, then 'convert to embedded object' (I think this is on the right click menu, Fragments> convert to embedded object).
This way you still get the benefit of consistency amongst forms using the same element, and only having to develop each element once.
I hope you find this helpful!
Margaret

Can we use six sigma with sap

can we use six sigma with sap

what i want to say
like sap ,six sigma methodology
in six sigma your failure level should be on six sigma level
means PPM per3.4
mapping ins ap
you have to design the process
so that you can getth resule at six sigma level
in my previous reply i indicate the sap palnt maintenance as example
you want more please revert back
manoj

ESS with SAP ERP 2004 ECC 5.0

Hello,
with SAP R/3 we used the Employee Self Services via an external ITS. Now we are using SAP ERP 2004 ECC 5.0 with an installed Java AddIn without Enterprise Portal.
My Question is:
What ways are possible, so that we can use the ESS functionality?
My Ideas are:
1. Use the old external ITS and connect it to the new system.
Problem: Is the connection possible?
or
2. Use the existing services from the internal ITS.
Problem: It seems that some are not working - is it possible to activate them?
or
3. Use the WebDynpro-Technology without Enterprise Portal.
Problem: Will it work?
All information I could find, is, that none of the mentioned ways will work, but maybe someone tried to do the same and was successful.
Thanks for ideas,
André

Hello Andre,
I don't have experience with using ESS web dynpro applications standalone without EP but I believe that should work just fine. We use standalone web dynpro applications for our mobile ISR/PCR approvals where we access web dynpro application directly via Blackberry. You should be able to access any web dynpro application directly without EP iView - for certain services you will need to provide the correct attributes and values via URL though.
Hope that helps you a little bit,
Harald

Using Bar Code with RF devices in ECC 6.0

Dear all,
We have recently installed SAP ECC 6.0 in our company and we want use RF devices for reading barcodes (not RFID). According to SAP documentation this is what they say:
" ... Currently, two device types are supported:
- GUI devices (with graphical user interface)
- Character devices (character-based) under terminal emulation mode
GUI Devices
These devices are connected to the SAP System just like any other
client-depented PC. ...
Character-Based Devices
These devices are linked to the system through an SAP standard
interface called the SAPConsole. ..."
However I took SAP SCM631 Course and the instructor said that SAP console is mandatory even in release ECC 6.0 for graphical devices. He checked with SAP and thy confirmed, I wrote a message to SAP and as usual they give me an ambiguous answer.
If some one can give me an idea on this subject it will be highly appreciatted.
Thanks to all,
Alex

Hi Alex,
For Character devices, you have to use SAPConsole.
For GUI devices if you want to use online, it should be ITSMobile(Earlier this was WebSAPConsole).
Thanks.
with regards,
Muthu Ganapathy.

BI Accelerator used in combination with SAP Business Objects Explorer

Hi ,
If you use SAP Netweaver BWA and SAP Business Objects Explorer Blade, do you only get the full benefit with using SAP BO Explorer, or will the same queries ran in BEx 7 Anaylser also benefit from the in memory OLAP processing?
I'm guessing that the SAP BOE Blade will only benefit SAP BOE.
It would be great if the current BWA had the ability to in-memory the OLAP part of the processing, as then it might be worth the hassle of getting it installed.
Thanks,
Jamie

Hi
May be the note : 1384526, could give you an insight.
Regards, Hyma
Edited by: Hymavathi Yanamadala on Feb 25, 2010 5:13 AM

RoboHelp 8 HTML - context sensitive chm file does not open?

This works:
RoboHelp_CSH.RH_ShowHelp(0, "C:\\RoboHelp\\!SSL!\\WebHelp\\XHelp_File.htm", RoboHelp_CSH.HH_HELP_CONTEXT, 2);
This doesn't
RoboHelp_CSH.RH_ShowHelp(0, "C:\\RoboHelp\\!SSL!\\Microsoft_HTML_Help\\XHelp_File.chm", RoboHelp_CSH.HH_HELP_CONTEXT, 1);
Why does the context sensitve calls of a chm file not work?
Does it require a different map file?

Hi there
I believe the actual call is different.
Here is a copy/paste from an older RoboHelp HTML CHM file that we might use as an example:
Window-level Help for Windows applications
To call a topic using a map number, make a call to the HTML Help API using the following syntax:
HWND HtmlHelp(Window(), “c:\path\helpfile.chm”, HH_HELP_CONTEXT, Number);
To call a topic using a file name, make a call to the HTML Help API using the following syntax:
HWND HtmlHelp (Window(), “c:\path\helpfile.chm”, HH_DISPLAY_TOPIC, "topicfile.htm");
Hopefully that helps.,. Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 moments from now - $24.95!
Adobe Certified RoboHelp HTML Training
SorcererStone Blog
RoboHelp eBooks

Using DB connect with SAP BW 3.5

Hello Expert,
I'm not sure if anyone has ever seen this kind of error message:
"Metadata for table A in BW is inconsistent. Check DataSource"
I just enhanced table A by adding one field in that table.
After that I edited data source in SAP BW and generated data source, I found some problem after loading data.
The error message from loading was "Field name LOCATIONCODE of object in DB system has been changed".
Therefore, loading was failed.
I tried to re-generate the data source from table-A and found the message "Metadata for table A in BW is inconsistent. Check DataSource".
In summary, there are 2 kinds of errors right now:
1) could not regenerate data source
2) could not load data into SAP BW
Any help would be appreciate.
Thank you very much
-WJ-

Hello,
Are the letters in the field name that you added in uppercase on the DB side? If not they need to be, I have
seen this as the cause of the error in the past for MSSQL databases, see the documentation at the link below:
->http://help.sap.com/saphelp_bw320/helpdata/en/58/
       54f9c1562d104c9465dabd816f3f24/frameset.htm
->Transferring Data with DB Connect
    ->Requests to Database Tables and Database Views
      ->Table names, view names, and field names
Best Regards,
Des

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

Similar Messages

Maybe you are looking for