RoboHelp version problem

I had RoboHelp 8.0 installed in my machine initially, which had crashed a few weeks back. Eventually the administrators got both RoboHelp 8.0 and 9.0 in the same machine. On my request the 9.0 version was removed, but as soon as a source file was opened I was getting a weird message " This project is from a newer version of the program.This project is no longer compatible with this version. Please make sure you have the newest version installed."
Can somebody provide me with a solution.

Hi Subarna,
Welcome to Adobe Forum.
If your getting this error message, please check the Adobe Robohelp HTML version, if it is Robohelp 8.0.0, then update it to Robohelp 8.0.2 then try and open your project. Also you need to make sure that you didn't open your project in Robohelp 9 because backward compatiblity is not possible, only way to open the project in Robohelp 8 by renaming or deleting the CPD. But first try these steps and see if that works.
Here is link to download the Updates.
http://www.adobe.com/support/robohelp/downloads.html
Hope this helps.
Thank you,
Priyank

Similar Messages

  • Can you help with RoboHelp Version 11: WebHelp Index Keyword Sorting?

    I'm new to RoboHelp 11, and I am finding it difficult to alphabetize topics listed under my Index Keywords. When I look at the keyword topics in my RoboHelp HTML editor, they are listed in alphabetical order (see the Tools topic in the first image), but when I generate WebHelp the Tools topics are not in the correct order (second image). I believe that the problem pertains to new entries made to a converted RoboHelp Version 6 WebHelp application. Basically, I have been adding content to several old version 6-generated html files in the new RoboHelp HTML editor.
    Another issue that's perplexing is the fact that the Move Up and Move Down icons at the top of the Index editor pod, or whatever it's called, are grayed-out (not functioning). I remember with the Version 6 application, they worked fine.
    Can anyone offer any suggestions on how to get the index alphabetized? I appreciate your help.

    Hi, pweb248
    Just an expansion of what Rick has suggested. Binary index is only used when Microsoft HTML Help "CHM" is your primary layout. So, because WebHelp is your primary layout, Binary should definitely be unchecked. Selecting the Index file (HHK) is fairly standard for WebHelp use and it is sorted numerically and alphabetically by default. The HHK file contains all the Index keywords and their topic associations all tucked into one file, whereas adding Index Keywords using the "Topic" radio button embeds the coded reference right in the topic html file itself.
    This online help topic explains a little more about the Sorting options depending on the primary layouts and whether Binary is selected.
    Adobe RoboHelp 11 * Edit index keywords
    This is the key paragraph:
    >>Note: The Sort command is unavailable with a binary index. The sort function is enabled only when the primary layout is HTML Help and the Index is set to Index File with no Binary Index. In all other layouts, the index remains sorted but for HTML output, the sorting of the index can be changed. Sorting enables the up and down keys on Index Pod.<<
    As you have noticed, your Index Designer view is apparently working as documented. I share your puzzlement about the out-of-sort listing in the WebHelp output shown in your screenshot. I wonder if there is some left-over crud from the ancient RoboHelp 6 code that is not converted properly and gumming up the works? Also curious if you have more than one Index in your project and if you are selecting the right one in the WebHelp Settings > Content dialog. Maybe Rick, Peter or Willam can shed some light on this?
    John

  • A solution for Secure Static Versioning problem in 1.5.0_10

    Hi,
    I have JRE 1.3.1_09 and 1.5.0_10 on my computer and I think I have solved static versioning problem.
    My test computer:
    - Windows XP sp2
    - Internet Explorer 7 (on another computer also IE 6)
    - Firefox 2.0.0.1
    - JRE 1.3.1_09
    - JRE 1.5.0_10
    I. Solution for Internet Explorer 6 and Internet Explorer 7
    1. Edit registry and add:
    HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Deployment\Policy
    DWORD: EnableSecureStaticVersioning = 0 (Hex)
    2. Restart browser if started.
    3. Start web page with java applet.
    II. Solution for Firefox 2.0.0.1:
    1. Install 1.3 JRE in the same parent directory as 1.5 JRE.
    Because default default installation path for 1.5 JRE is C:\Program Files\Java\jre1.5.0_10 you need to modify
    1.3 installation path from default C:\Program Files\JavaSoft\JRE\1.3.1_09 to C:\Program Files\Java\jre1.3.1_09
    After installation check out that "bin" directory is in the following path:
    C:\Program Files\Java\jre1.3.1_09\bin
    2. Install 1.5 JRE in default installation directory: C:\Program Files\Java\jre1.5.0_10.
    After installation check out that "bin" directory is in the following path:
    C:\Program Files\Java\jre1.3.1_09\bin
    3. Restart browser if started.
    4. Start web page with java applet.
    Note: HTML page must use <object> tabs for Internet Explorer or <embed> tabs for any other browser (e.g. Firefox). You need to specify correct classid in object and/or embed tag.
    P.S. If anyone would like to discuss with me send me an e-mail to [email protected], but please post question to forum and just mail me a link to forum. I will write my answer to forum.
    Hope this helps,
    Grofaty

    I have been trying to find a solution for this issue at our organization for over 6 months. Finally, we have a work around to run multiple java versions for newer and aging java apps.
    Thanks,
    Adunlow

  • Version problem in DMS

    Hi All,
    In DMS
    When i create a document with bapi_document_create2 it is creating the document with what i have given the inputs
    documentnumber
    documenttype
    documentpart
    documentversion
    but version problem is there . Ex: if i give version as 03 but is creating the docuemnt with version from 01 . next if i give 10 as a version it is creating the document with version 02...like that..
    Please advice me .. i want to create the document with the version what iam giving.
    Regards,
    RSK

    Hi,
    Transaction Code: SE18
    Selecting the radio button "BADI name" and enter "DOCUMENT_NUMBER01" in the text box to right to see the definition.
    The method is: DOCVERSION_CHECK
    Hope this helps.
    Regards,
    Benu

  • Labview version problem?

    Hello guys,
    I have made a subVI that controls the rpm % of a wind tunnel vane. This consists in adquiring 2 values of data within 30 seconds and compare both to see the uniformity of the flux. I use a Labview 2011 version. The problem occurs when i use this subvi in a 2012 version. The 30 seconds turn to 1 minute... I want to ask if its possible for this to be a version problem.

    I'm concerned that you are reading a file and then reading it again 3 seconds later.  This tells me you are looking for when the other process stops writing data.  File IO is a terrible way to share data.  Use a Notifier or Queue instead.  Much more efficient.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • OCCI version problem

    Hi,
    I am having a version problem with 9i.
    How can i compile OCCI with 9i database installetion?
    Which library would i need?
    my server is a SOL-Sparc-64 machine
    and oracle database server is installed there versiion oracle 9i 32bit.
    I tried to compile but it gives me error like....
    Undefined first referenced
    symbol in file
    main /usr/local/lib/gcc/sparc-sun-solaris2.9/3.4.2/crt1.o
    __1cG__CrunKpure_error6F_v_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cDstdbC__RTTI__1nDstdMlength_error__ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cDstdMout_of_range2T6M_v_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mpkc_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cG__CrunIex_alloc6FI_pv_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cG__CrunIex_throw6Fpvpkn0AQstatic_type_info_pF1_v_v_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2G6Mrk1_r1_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cDstdMbasic_string4Ccn0ALchar_traits4Cc__n0AJallocator4Cc___2t6MpkcIrkn0C__v_ /data/Indranil/prasenjit/clientlib/libocci.so
    __1cH__rwstdRexcept_msg_string2t6MIE_v_ /data/Indranil/prasenjit/clientlib/libocci.so
    Please tell me how to do it.
    Edited by: user652233 on Oct 16, 2008 1:18 AM

    Hello,
    I am trying to compile my C++ code (using OCCI) on Sun Solaris 5.9 (SPARC64PLUS) environment.
    We have compiled and tested it on RHEL 5 Linux.
    The Oracle (10g R3) database is on RHEL 5 server while OCCI/C++ application would be running on Sun Solaris 5.9 server.
    Since we have no Oracle installation on the Sun Solaris 5.9 server, there are no OCCI related libraries on this server and hence we are not able to compile our C++ code on Sun Solaris 5.9
    Can someone help me on how/where to download OCCI libraries (compile time as well as run time) for Solaris 5.9 ? I could find only Windows and RHEL versions of OCCI libraries on the Oracle website.
    Also, how stable is OCCI on Solaris 5.9 ?
    Regards,

  • Can I get a copy of RoboHelp version 9?

    Hard drive crash and need a copy of RoboHelp version 9. Can I get a copy?

    I'm guessing that if you didn't keep the CD, you also did not register. The link Willam has given you is legit as you will need the serial number, as you will if you go to Adobe Customer Support. With Willam's link though, it will be quicker and you don't have to provide proof of purchase.
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

  • Trial version problem with the wrie Create with the trial version

    help me
    trial version problem with the write Create with the trial version
    i wanna delete the Create with the trail version

    Publication on businCata I am sorry I do not understand your inquiry.  Can you please restate your question?  What Adobe software or service is your inquiry in relation too?

  • Service pack versioning problem

    Can anyone help me solve service pack versioning problem please. This
    problem may solve some of my other problems.
    I am trying to check if my service pack has been installed properly or not.
    I issue following command from command prompt:
    C:\>java weblogic.Admin t3://localhost:7001 VERSION
    I get the following error: "Failed to connect to t3://localhost:7001 due to:
    [java.net.ConnectException: No server found at T3://localhost:7001]"
    At this time, I have weblogic 5.1 installed with service pack 2 installed.
    If I run server seems to be running, and connecting to my
    database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
    2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

    Thanks Mike, you are right. The server was not running while I was testing
    service pack test.
    And service pack is installed. Thanks
    WLAS5.1 does not run once I change JAVA_HOME TO "C:\jdk1.3.0_02", that
    where I have jdk1.3
    I get following error message:"wlserver.exe has generated error and will be
    closed by windows. You will need to restart the program."
    John
    "Mike Reiche" <[email protected]> wrote in message
    news:3ac8fe17$[email protected]..
    >
    1) You WLAS does not seem to be listening on port 7001 of your
    localhost. Is it listening on a different port? Running on a
    different machine?
    2) What error message do you get when trying to run WLAS with
    JDK 1.3? WLAS does definitely run with JDK 1.3
    Mike Reiche
    "John" <[email protected]> wrote:
    Can anyone help me solve service pack versioning problem please. This
    problem may solve some of my other problems.
    I am trying to check if my service pack has been installed properly or
    not.
    I issue following command from command prompt:
    C:\>java weblogic.Admin t3://localhost:7001 VERSION
    I get the following error: "Failed to connect to t3://localhost:7001
    due to:
    [java.net.ConnectException: No server found at T3://localhost:7001]"
    At this time, I have weblogic 5.1 installed with service pack 2
    installed.
    If I run server seems to be running, and connecting to my
    database.Eventually I am planning to upgrade to SP6 and run with jdk1.3.
    2nd problem: When I make JAVA_HOME= JDK1.3, wls does not run.

  • RoboHelp 10: Problems generating Printed Documentation

    Environment
    Windows 7 Enterprise, Service Pack 1, 64-bit operating system
    Office Professional Plus 2010 Versions 14.0.7106.5001 (64-bit)
    RoboHelp 10: 10.0.0.287
    Visual Studio 2010 Professional. I open RoboHelp from within Source Control (have been doing it for two years).
    Problem
    Sometime after moving to RoboHelp 10, and even after successfully generating Printed Documentation output, I encountered a major problem generating Printed Documentation from RoboHelp: “Internal error encountered. Failed to generated Printed Documentation”. The error occurred when I tried to generate Printed Doc using my default TOC, which looks something like this:
    Topic A
    Topic B
    Book 1
    Book 2
    Book 3
    Topic C
    Topic D
    Based on an old Peter Grainge reply to someone about a similar problem, I removed all but the first topic from the Chapter Layout pane and generated the Help. Everything was fine until I got to the topics after Book 3. At that point everything started to fail again. When I removed Topics C, D, etc. from the Chapter Layout pane, the output was built successfully.
    I tried moving Topics C, D, etc. to the top of the Chapter Layout pane, and got the same error. I tried creating a new folder and put Topics C, D, etc. into that folder. Failure after failure.
    As an experiment, I removed all the Topics C, D, etc from the Chapter Layout pane, but then added them to the Print Document Section Layout pane (not where I want them). The Printed Documentation built successfully.
    During attempts to build with Topics C, D, etc. in the Chapter Layout pane, I kept getting a Word error: Word is trying to recover your information. After that there was always a failure.
    Selecting PDF as the output did not work when the Topic C, D, etc. files were at the bottom of the Chapter Layout pane.
    I create a new TOC and a new Printed Documentation SSL. Failed to generate.
    As a matter of reference, I've been generating Printed Documentation from the same TOC for more than a year and so cannot figure out what has changed in RoboHelp or Word to cause this grief .
    Has anyone experienced anything like this?
    Carol

    Dear Peter,
    Thanks for following up. Last Friday I finished extensive testing on my own and working with RoboHelp Support. Here's what I sent to Support this morning.
    If after reading this screed, you think it worthwhile for me to get a copy from Source Control for you to look at, I will do so. Thanks for offering to look at it.
    Environment
    Windows 7 Enterprise Service Pack 1, 8.00 GB RAM, 64-bit OS
    Microsoft Office Professional Plus 2010 Version 14.0.7106.5003 64-bit--Note: We repaired my current version of Word, in case that was the problem, but did not reinstall Office--we do not think that the Word version is the problem because we generated successfully with other TOCs and when generating individual documents.
    RoboHelp 10.0.1.292. Upgraded from RoboHelp 9 in May 2013. Replaced hard drive in September 2013 and reinstalled RoboHelp.
    Visual Studio 2010 Professional 10.0.40219.1 SP1Rel (I open the project from Source Control and check files out to a folder on my desktop.)
    Issue
    Printed Documentation failed multiple times with the default Table of Contents, which contains all the topics in the project. TOC specs are as follows:
    Properties: .docx, desktop location, no conditions, embedded images, “Generate a single document”, “Retain hyperlinks”.
    330 files, 12 top-level books, 15 second-level books, 7 third-level books, 6 fourth-level books, and 8 fifth-level books
    Results
    Generation to Printed Documentation does NOT fail for other, module-specific TOCs, nor to WebHelp Pro SSLs for the same sets of topics. In addition, and perhaps more important, generation to Printed Documentation does NOT fail with “Generate Individual Documents” selected, or when there are approximately fewer than 259 files in the TOC.
    Did not fail consistently based on any particular topic.
    Did not fail consistently based on location of any particular topic in the TOC.
    Failed when I created new TOCs based on ‘working’ TOCs. For example, copied a module-specific TOC and then added topics to it from the default (superset) TOC. I did this in case the original default TOC was corrupted.
    Failed when I create a new TOC with the same folder/file structure from scratch.
    Failed when I created a new TOC with a flat file structure from scratch.
    Failed when I retrieved an older TOC from the last release of the product.
    Failed when I created new SSLs each time. I did this in case the SSLs had got corrupted.
    Failed when I did not open the project from Source Control (removed project from Source Control and worked locally).
    Began to see failure when there were more than about 258-263 files in the TOC. For example, successfully generated Printed Documentation with 262 files in the TOC. Added one topic and the generation failed. Removed that topic and added several others, one at a time. Consistently failed. To test this, I created a TOC with all the files in a flat structure, generated a report for the TOC, printed it, and counted the number of files. I then began deleting files and regenerating the Printed Document to try to identify the number of files in the TOC when the generation failed. Successfully generated up to about 258 files and then it began failing. (Occasional successes at 260 and 261, but that may be because I didn’t always consistently remove the Glossary and Index from the Chapter Layout pane.)
    Other Comments
    (I know that we should generally post non-RH issues to other forums, but in this case I wanted to include all potentially related issues in this posting.)
    The first time you generate any type of output, the “Critical error of Source Control Provider. Please restart IDE.” Message appears. This message appears behind RoboHelp. As a result, if the RoboHelp window is maximized, you think that RoboHelp is hung. Forcing a close of RoboHelp leaves the partially generated Word document in an unstable state. When you re-open RoboHelp and try to generate the output again, RoboHelp says that the output is in use. Unfortunately, there is no way to ‘free’ the Word document and you have to restart the computer. In addition, when the dialog box is hidden, even using Alt+Tab to find the dialog box is complicated because you can’t grab it and click OK until RoboHelp completes its processing. The workaround is to reduce the size of the application window so that you can see the dialog box and try to quickly grab it and click OK. That said, as soon as processing is complete you can grab the dialog box and click OK; at that point RoboHelp displays its own error message about the success or failure of the output generation. It is not clear whether the RoboHelp API or Source Control puts up this error message, but it’s definitely a problem until you happen upon the workaround.
    RoboHelp does not check SSLs even when I right-click the SSL in the Single Source Layouts pane, click Check In, select the XML and SSL files, and leave “Keep checked out” deselected. The red check mark remains next to the SSL name. In addition, even when I Check In All files before closing the project, the next time I open the project RoboHelp displays a series of Check In dialog boxes requiring me to check them in again.
    When RoboHelp hangs during a Printed Documentation failure and the Version Control setting is to check in all files when closing a project (which I’ve now deselected to avoid this problem), Ctrl+Alt+Del indicates that you cannot shut down the program because RoboHelp is waiting for a response. Yes, RoboHelp was waiting for me to check in some files (because of the Version Control setting), but hid the Check In Source Files dialog box behind the application. This usually left a Word document in limbo, forcing me to restart the computer.
    At one point RoboHelp stopped saving changes to an SSL after I made changes and clicked Save and Generate. Each time I reopened the SSL, I had to select .docx, etc. all over again.
    Carol

  • RoboHelp Version Compatibility

    Hello everybody from Greece,
    I want to ask about version compatibility. I've got RoboHelp
    HTML 5.0.2 and my client has RoboHelp HTML 3.1. He asks if I can
    compile his project, but I wnt to know if he will be able to work
    with the project that I will work with in version 5.0.2.
    Is there a way to save the project to an older version?
    Is there a compatibility problem in general?
    Is there going to be a problem if I compile the project in
    the newer version? (Will he see any differences?)
    Any help would be appreciated.
    Thanks in advance.

    Hi Tansou and υποδοχή,
    You should be able to open up the X3.1 in X5.02 without a
    problem. X5 will preserve all the feature used in X3.1. Are you
    compiling HTML Help? My guess is that you won't see any difference
    in the output when you compile.
    However, the problem comes when you try and do this the other
    way around. Robohelp is not backward compatible. So you won't be
    able to pass a modified project back to your client. Rick the
    robowizard has a few tricks to help with backward compatibility if
    you don't mind going under the hood. However, not sure if this
    works with X3.1 jumping to X3.1.
    What type of output are you generating?
    Hope that helps
    Craig

  • Robohelp decompile problem

    Greetings:
    I haven't been on the forum for a while, but I have a real
    problem. I inadvertently deleted some components of my original
    Robohelp data directory, so I followed the (excellent) instructions
    posted here regarding the use of the Keytools.exe pgm to decompile
    the chm file. This has worked for me in the past.
    Today, however, I find that, although the decompile works
    fine, the next steps fail -
    Open Robohelp HTML from the selection of pgms within Robohelp
    X5.
    Select New Project
    Click the Import tab
    Select MS-HTML Help project; OK
    Select the HHP file that keytools created; Open it.
    when I attempt to open the Helpfile.hhp file, a msg appears -
    'unable to create database - check that the directory is not
    read-only'
    the file folder is indeed marked 'read-only', but every time
    I uncheck it, the change is 'ignored'.
    I have never seen an instance in Windows XP where this
    happened before.
    Needless to say, I can't successfully recreate my Robohelp
    data files, at this point.
    Has anyone else seen this?
    thanx for your help!
    Robert Gross
    Budgetext Inc.
    Technical Documentation and Training

    Peter: Thanks for the excellent reference material - each
    method seems to successfully retrieve the data topics, but
    unfortunately I get the same error msg upon opening the HHP file:
    'unable to create database - check that the directory is not
    read-only'
    I have searched the forum, and one possible answer seemed to
    be, 'reinstall Robohelp', but I don't have access to the original
    install disks, so I really wanted to avoid that if possible.
    Any other suggestions would be appreciated.
    In the meantime, I will continue looking for those install
    disks....
    Robere 144

  • Oracle IDS Version problem (IDS is not compatible )

    Please address my technical query mentioned below.
    We are facing problems while porting/deploying our application on the Oracle 10g application server.
    The application server version is 10g R-2 (64bit)(10.1.2.0.2), the IDS version is 10g (9.0.4) and OS is HP-UX 11.23.
    Earlier when I tried doing the IDS installation, the pre-installation check failed saying that the OS is not supported, the supported OS version for IDS 10g-9.0.4 was HP-UX 11.00 & 11.11. I then bypassed the pre-installation check using the -sysPreRequisite option of the runInstaller same and the installation succeeded.
    The forms even got compiled but when I tried to execute the forms from the browser, it throws the error message number FRM-40011, which says that the form was created by an older version of the form builder.
    This was the problem we have been facing since the start even when we have done installtion on other site, and even though we had installed the application server and the IDS afresh, the same problem persists. The only thing I can conclude from the above is that the IDS is not compatible with the current version of the OS/Application server and we need to upgrade to IDS 10g so that it works on HP-UX 11.23, with Oracle Application Server 10g R-2(10.1.2.0.2).
    Kindly provide your technical support in the above matter and supply us the correct version of the Oracle 10g IDS.

    I can't even understand this reply; unless I can do it with one single click, it's not good for me! I have always been Firefox user but right now I regret updating to 5.0!

  • XMl parser version problem for running struts project in jdeveloper 10.1.3

    Dear All.
    I am trying to run a struts (v 1.2.9) based project in Jdeveloper 10.1.3.1.0.The struts version in Jdeveloper is 1.1.
    when i am trying to run the index.jsp i get an error:
    org.xml.sax.SAXNotRecognizedException: http://apache.org/xml/features/validation/dynamic
    I think the XML parser version is a problem.Jdeveloper has OracleXMLParser v2 and i think the XML Parser apis used in building the project is different.I have placedcustiom xml parser apis and the xerces.jar in the jdevbin/jdev/lib folder and included these jar in the bootclasspath as follows:
    AddVMOption -Xbootclasspath/p:../lib/xml-apis.jar
    AddVMOption -Xbootclasspath/p:../lib/xerces-2.6.2.jar
    But even then the Exception persists.Is the syntax for Xbootclasspath wrong or i need to place these custom api's in some other location of jdev.
    I am not being able to figure out the XMl parser problem.
    Any help wud be great.
    Is it that i cant run the project in jdeveloper.Just to mention the application is deployed in OC4J on the server and runs fine..But its only that i kant run it locally through jdeveloper

    I am also facing the same issue on my laptop. I searched for forum but no luck.
    appreciate if anybody can throw some light on this.

  • SMP 2.3 Agentry update versions problem

    Hi,
    please I experienced issue when deploying new version of Agentry application to SMP 2.3. On devices we have stable old version. When we deploy new version through SCC on SMP and then we try to transmit device , it freezes on "Sending client info" . But in SCC it is running normally (e.g. when we reinstall client on device or reset ATE, it downloads new version with no problems).
    Our steps are::
    Deploy version 1
    Make initial sync.
    Deploy version 2
    Make delta sync.
    Expected result: new ersion is downloaded with delta sync correctly (currently we get freeze on “sending client info”).
    Thank you for any help
    Martin

    Hi Steve,
    we use Agentry_6.0.30 and I am talking about Application Logic release.
    Thank you

Maybe you are looking for