RoboHelp x5.0.2 integration with Frame 8.0

Our company is looking to rid itself of Word (well, we tech
writers would like to get rid of Word and are looking to build a
case for making a switch to Frame) . We are also using RoboHelp
x5.0.2 - will this pose a problem for us?
This forum seems like an excellent place to start! Any words
of wisdom out there?

You will need the Technical Communication Suite (special
version of RoboHelp 7) for single sourcing workflow from FrameMaker
to RoboHelp. If you are looking for FrameMaker in place of Word and
already use RoboHelp, this might be a worthwhile option for you to
explore. Please check out the trial version.
Disclaimer - I work for Adobe Systems

Similar Messages

netui-template integration with frames

Greetings,
Is there any integration between <netui-template and HTML frames ? For example, I need to define several frames in all the JSPs of a webapp. I'm using a template which declares something like:
<framest colums="25%,75%>
<frame src="leftTemplate.jsp" name="left"/>
<frame src="rightTemplate.jsp" name="right"/>
</frameset>
where leftTemplate.jsp and rightTemplate.jsp are templates. This raises an exception saying that there is no template context due to the fact that templates are used directly, which is right.
I tried to use <netui-template:section instead of frames but the target option of <netui-html don't seem to be integrated with sections. For example, I need to click an anchor in a section and produce a visual feed-back in another one. If I use the target option of the <netui:anchor to specify the second section name, it doesn't work. If the name specified by the target option of the <netui:anchor is a frame name, then it works. So I need either to be able to use templates in conjunction with frames or to have target-aware sections.
Any suggestion would be higly apreciated.
Many thanks in advance.
Nicolas

Hello
Which URL are you using in your Communication Channels? Make sure you use the appropriate URL as listed in note 1953125.
Also, make sure proper credentials are stored in the IMG.
Hope this helps.
Sridhar

How to work in RH9 when project is integrated with TFS and TFS server is down

My RoboHelp 9 project is integrated with TFS/Visual Studio. The server went down yesterday and won't be back up until late today.
If I open the project locally (rather than from Version Control), how do I eventually get the latest files (those that I've worked on locally) into Version Control?
Thank you.

Hi,
I use the following method:
1.       Open the project and disconnect from source control.
2.       Modify any files you need. Be aware that when you add/rename/remove/move files, the RoboHelp control files are modified too. (.apj and .fpj)
3.       When TFS is up, check out the files using team explorer. Do NOT overwrite local files. (Make a backup first.)
4.       Using TFS, check in all modified files. Do NOT check in the XPJ file. If you do, the project will lose its connection with source control.
5.       Thrash the local project.
6.       Get the latest version from the server.
Be aware that this requires that you know what you’re doing. Especially when control files are modified. When you only modify the content of existing topics and check the existing topic in, you should be fine.
Greet,
Willam

RoboHelp 9/Acrobat X Pro Integration with Outlook 2010

Is anyone aware of any issues with RoboHelp 9 and/or Acrobat X Pro integrating with Outlook 2010? When I create a PDF for review using RoboHelp and then try to send it for shared review, I keep getting an error message when I try to add people to the To and CC lists in the Send for Shared Review dialog. Clicking either button brings up my Address Book from Outlook, and I can select people without any problems, but whenever I click OK, I get a Check Names dialog book that says:
Microsoft Outlook does not recognize"/O=Company Name", Select the address to use:
(No Suggestions)
At this point, all I can do is go back to the Address Book and try to add people again, but this leads to the same error.

In Outlook, go to File/Options/Add-Ins, and select Manage Com Add-ins, and click Go...
Then make sure the PDFMaker Office COM Addin is checked, select OK, restart, and it should be available.

SOA 11g Worklist Apps Customisation and Integration with Plumtree Portal

Hi,
We want to migrate an existing application build using SOA Suite 10.1.3.3 to 11.1.1.2.0.
In the 10g application the worklist application was customised and the customised apps was linked as a remote portlet in BEA Plumtree Portal.
1)In 10g the worklist application source code is available (\SOA_Oracle_Home\bpel\samples\hw\worklistapp) for customisation but is that possible for 11g ?
(The location of the default deployed worklist apps in 11g is /../mdw_home/user_projects/domains/soa_domain/servers/soa_server1/tmp/_WL_user/worklistapp).
Can we take the source code and customize in jdev and deploy under a different contextname in 11g??
3)Our existing 10g worklist was customised a bit in terms of look and feel and for some custom authentication and it was deployed in the 10g SOA Server.
A sample jsp application was created and the login page of the custom worklist apps was linked in a inframe so that it works when integrated with the Plumtree portal as a remote portlet. And this worked perfectly in 10.1.3.3 SOA Suite.
However the 11g SOA worklist login when tagged in a jsp as an inframe in plumtree portal is giving a warning message
Warning: Unable to load content in a frame. Frame content will load at the top level. On cliicking the OK button the worklist page is opening. This is with Firefox browser . however form IE7 or 8 its timing out from portal.
As per http://newsoalife.blogspot.in/2009/09/framebusing-in-adf.html
changing the web.xml for the worklist can help.
Can anyone please let us know on the same as this appeas an unsupported one.
Regards
Ashif

Hi,
Can you check the log file.u are getting any error.can you check wf_error table also u are getting any error.
Can you check consumer in AQ tables.
Thanks,
Rahul

Avaya(Non-java app) integration with ADF

Hi,
We have a desktop application Avaya (non-Java) & want to integrate it with ADF. Currently we do it by passing parameters in HTTP URL. If the user clicks on a button in non-java app, it should:
(1) open search page of an ADF application and execute search.
(2) if the ADF application is already open, the button on Avaya app should execute search with partial page refresh. However, the whole page is being refreshed.
Can you please guide, how to do this with partial page refresh? , as the No 1 is almost achieved.
Thanks,
NC

Hi Shay,
Below Options were tried for integration. Please have a look at them and suggest if there is any other possible way to Integrate Avaya with ADF.
1) Calling ADF application with URL parameters.
Reasons to drop:
Every time a URL is called the entire page will get rendered again taking some 2-3 seconds which is very critical to the application.
ADF is capable of handling URL parameters without re-loading the whole page(http://oracamp.com/passing-parameters-adf-application-through-url). But we can't use this inbuilt way as we have many customized developments implemented in the page. This way directly works at AMImpl (at Model level) level. We want the events to be fired at View level. That is backing bean level.
2) Avaya is capable of dealing with ActiveX (OCX). They sent me 2 DLLs which handles communication between web page and Avaya application. A simulator was also sent (bundle attached herewith). The steps to be carried out for testing are-
Installation procedures:
i. Register the DTLCRMINT.ocx file. Start->Run-> Type the command
ii. regsvr32 <ocx file location>
iii. Register the DTLINTCMP.ocx file. Start->Run-> Type the command
iv. regsvr32 <ocx file location>
v. Double click on the Clinet.exe it would open up a windows application with a Textbox and Command button. Put In the data which needs to be sent.
vi. Open the CRM Page.html. On opening the OCX would be loaded by default.
vii. Now clicking the Send Data button on the client application, whatever information is there in the Client Text Box would be sent to the web page.
viii. From CRM side, the application needs to use the OCX provided, and must wait for the event. On receiving the event the data that is retrieved as a part of the event can be parsed to update the text box and click on the search button.
Reasons to drop:
It works fine with basic HTML page. But once integrated with ADF page as an inline frame it doesn't work. We tried to embed the OCX object inside <verbatim> tags, but was not successful. The event fired by ActiveX object is triggered at client side by VBScript function. Avaya's ActiveXs seem to be only working with VBScript according to my understanding. So there was no way for ADF to capture VBScript events.
ADF is capable of javascript up to some extent. To do a critical application like this, my feeling is javascript is never a good option.
3) To use a text file. Avaya writes, ADF application reads.
Reasons to drop:
ADF can read the text files with normal java IO methods. But only the server directories are visible. So, Avaya has to write the information in the server file. With using a parameter like user name, ADF application can read the file in regular time intervals (with using poll feature) and get relevant information and automatically run the search.
Initially the idea was to do this at client side. But since this is a web application, file reading at client side is next to impossible. Again when one side is reading and the other side is writing, file access violations may occur.
4) Another option is if Avaya can offer the value in a web service, the ADF application can get it.
Reasons to drop:
There may occur a latency as well as Avaya says they can't offer web services.
5) The ideal solution is, the ADF application's front end control's IDs can be provided. If the Avaya system is capable of accessing or getting hold of DOM and pushing the value to the controls and clicking the button; things would become pretty straight forward. JMeter works like this in testing J2EE applications.
Any Recommendations how can it be done .
Thanks.

Event Server Integration with other Products

I have been using the EDA approch in my SOA project for few years now. These were based on JMS and other modes of Events supported by the WLI, BPM products. Now we have a dedicated Event processing server can we expect utilities/UI components that would easE the integration with other BEA products? What is the time frame for the avilability for this as well as the console for the Wev server?
Thanks,
Anil Datt

Hello,
Thank you for your post. We do have some integrations with other Adobe products planned for the future, but it's too early to announce our plans. We appreciate your enthusiasm for Buzzword - please keep the suggestions & ideas coming.
Kind Regards,
Michelle

RoboHelp V6 - Using Context Sensitivity with SAP R/3 ECC 6.0

We are creating online help/procedures using RoboHelp,
Version 6. We are also upgrading from SAP R/3 4.6c to SAP R/3 ECC
6.0. ECC 6.0 has different backend coding than 4.6c that does not
allow us, at the moment, to implement context sensitivity. My
question is this: Can RoboHelp V6 be integrated with SAP R/3 ECC
6.0 that will allow for context sensitivity? Does coding exist for
this to happen? What must take place for this to work properly? Any
assistance would be greatly appreciated.

Welcome to the forum.
I can't help you on the coding side but is using a URL an
option? If it is, then see my site where I explain how to call
webhelp using URLs. That includes how to open the help pointing to
a specific topic, thus giving you context sensitive help.

BI Publisher Performance integrated with OBIEE 11g

Has anyone seen issues around the performance of rendering the BI Publisher frame when it is integrated with an OBIEE dashboard (11g)?
If I create a simple BI Publisher off a simple data model (Select 1 from dual). I open the BIP report within the BI Publisher environment (XmlpServer) and it opens in seconds.
When I open this same report within the OBIEE Web Catalog or place it on a dashboard page I have seen it take upwards of 40-50 seconds to render the frame then the report. The time seems to me more around rendering the frame.
Usually when you initiate your first session you see the longest rendering time, subsequent runs of the report are lower but still higher then the few seconds it takes in the BIP environment.
Has anyone else seen this issue, we opened a ticket with Oracle and it seems they are leaning toward creating a BUG around this. Just wanted to see what others were experiencing and if they identified the source of the issue. Thanks.

Hi Dustin,
The FMW security model in BI Publisher means it is integrated into OBIEE - I believe it's the default. If you're using authenticating and authorising via weblogic then I can't think of a good reason to use BI Server authentication in publisher, you should be using FMW security.
In answer to your question tThere was no bug raised. The work around for us was using document 1338007.1. In your case that doesn't seem necessary since you're using OVD already.
Edit - should just add that if your OVD authentication is set up in the repository then you need to shift that to the weblogic server security model and remove any authentication logic from the repository. After that the FMW security model for publisher should work.
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10543/privileges.htm
Regards,
Robert
Edited by: Robert Tooker on Nov 3, 2011 2:07 AM

Integration with ClearCase?

I have read that RoboHelp X5 doesn't integrate properly with
ClearCase, even though it claimed compatibility with any product
that supports the SCC API. Does RoboHelp 6 properly support
ClearCase?

Check out the Visual Studio Source Control Provider at
http://dev2dev.bea.com/codelibrary/code/vsscp.jsp
Josh
Amit Bhutra wrote:
Hi,
Has anyone done clearcase integration with workshop? Any pointers highly appreciated?
TIA,
Amit

Can Oracle Application Express (APEX) be integrated with ADF applications?

Hi All,
Oracle Application Express (APEX) works on various supported databases. Can this tool be integrated with ADF for report publishing, in adf some of my result is coming from Business Components , so can these things be related to each other?
Please provide a suitable forum to ask this question if this question doesn't fir in ambit of this forum.
Thanks in advance.

There are a couple of things you can do - a lot depends on what your application needs. Since you ask this in the JDeveloper forum, I'm going to address getting to ApEx from ADF, not to ADF from ApEx - but some of the same possibilities apply.
Easiest thing to do is to jump into the ApEx application with a af:goLink or af:goCommand referencing the needed page's URL. By setting the target, you can control whether it opens in a new window or the same window. I'm not currently using ApEx, but I have a few reports written as PL/SQL Server Pages that I call exactly this way.
You can also open the ApEx pages in an af:inlineFrame - and it will look like it is inside your ADF application - but use inline frames with a little caution - they don't work perfectly in all browsers, notably Mobile Safari.
ApEx can't look inside your ADF BC objects, but of course, if your two applications are using the same database, you can communicate between them within the database. One possibility to look at is Advanced Queuing.
Some ApEx functionality can be executed by executing the underlying PL/SQL procedures - do a search in this forum for how to call PL/SQL from an ADF BC Application Module.

Appcelerator integration with SMP3.0

Hi All,
I would like to get some information on Appcelerator integration with SMP3.0. Has anyone worked on Integrating Appcelerator with SMP3.0. Please share sample code and docs if available.
Appreciate your help.
Thanks,
Uday.
[DOUBLE POSTED: http://scn.sap.com/thread/3597216 THIS THREAD LOCKED BY MODERATOR]

Hi,
To open the jump report in new window or in the same window we can use option "show jump target in" in BW3.X and "RRI Open mode" in BW7.X, in 3.X we can see following 3 options
1. No Entry or _self - This opens the jump report in new window
2.Frame Name - This is with HTML code, to partition the current window.
3. Window Name - ???how can I use this option???
can anyone pls let me know, how can we use frame option to open new tab and how can I use window name option to open in new tab.
My IE settings are set to open in new tab insted of new window, still the it is not working.
Thanks for your help.

OIM 9.1.0 Integration with Active Directory 2008 R2

Hi,
My customer is running Root/Child AD structure based on windows 2003 w/SP2, OIM 9.1.0 deployed under one of the child domains, and integrated with child domains controllers which runs windows server 2003 as well.
My customer has decided to upgrade his AD to Windows Server 2008 R2 domain controllers across the entire AD Forest and still wants to integrate the current OIM v9.1.0 with AD for all of his Users provisioning and password synchronizations.
Am not sure if current OIM version of OIM 9.1.0 is compatible and supported by OIM v9.1.0 under active directory version 2008 / R2, and not sure if it can be integrated with such AD version.
Any guidance is really appreciated.
Also I was thinking of such scenario but also not sure of its support ability and if OIM will keep working on such scenario, the scenario is to upgrade only the AD root domain to Windows 2008 R2 while keeping the child domain holding the OIM 9.1.0 at Windows 2003 version.
Is this a working and supported scenario by OIM v9.1.0 ?

I believe you question should be if the connector supports this architecture. Check out the versions supported for the connector you are using and you should be good.
-Bikash

Service desk integration with 3rd party tool

Hi all,
I've problems understanding the setup of connecting a 3rd party service desk tool with solman itsm.
So far it's clear that I need to activate and configure the service provider and consumer in soamanager.
The webservice then will be called by the 3rd party tool with corresponding data.
However, according to spro I need to define a value mapping for incoming/outgoing calls.
I do not understand this mapping... the WSDL of webservice ICT_SERVICE_DESK_API contains lots of fields, but in spro -> value mapping I can only define the following fields (which are hard coded in type pool AIICT):
SAPCategory
SAPComponent
SAPDatabase
SAPFrontend
SAPIncidentID
SAPIncidentStatus
SAPInstNo
SAPOperatingSystem
SAPSoftwareComponent
SAPSoftwareComponentPatch
SAPSoftwareComponentRelease
SAPSubject
SAPSystemClient
SAPSystemID
SAPSystemType
SAPUserStatus
What about attachments, priority etc.?
Will the interface parameters mapped to these ones?
For what purpose do I need to maintain the value mapping?
Can you give me a hint?
Regards, Richard Pietsch

can you please check the WIKI Solution manager Service Desk Integration with third party service desk - SAP Solution Manager - Security and Authorizat…

Java Stack mandatory for a SAP BI system integrated with EP?

Hi Guru's,
Currently we are using SAP NetWeaver 2004 s version 7.0 system for our BI.
This is integrated with the EP. But our BI system does not contain the Java Stack installed.
When we work on WAD templates and execute the template, it is automatically directed to EP portal where we can see our reports.
Here my question is do we need Java Stack for this system to use ADOBE DOCUMENT services or can it work with EP only for the web functionalities.
Any info on this is of great help.
Best Regards
Kumar

HI Reddy,
We came to know from our basis team that we do not have the Java Stack installed in our BI 7.x system yet.
As it is integrated with EP which has Java, our web reports are working.
1) But my question is still do we ned to install the Java Stack in our BI system as i do not find any Export to PDF option in EP for the reports (eventhough AS Java supports this).
2) Or can we use the existing configuration without Java STack integrated to EP for the new tools like Report Designer and Integrated Planning?
Regards
Kumar

RoboHelp x5.0.2 integration with Frame 8.0

Similar Messages

Maybe you are looking for