RoboHelp X5 activation (yet again)
Hello everyone
It has been ages since I posted here and I haven't used RoboHelp X5 in ages (We have migrated our project to MadCap Flare) so please bear with me.
I need to open an historical project with RH X5 to have a look at some CSH stuff.
To my surprise, I am asked to activate my copy of RH X5 and have discovered on the Internet that this was a known issue.
I read snippet 100 of Peter Grainge's website and tried to follow the steps described there and in
http://www.adobe.com/support/robohelp/downloads.html
However, or I need new glasses, or I am very tired, but I cannot find the mentioned X5.0.1 and X5.0.2 patches (looks like their hyperlinks have been removed from the document), nor the links that are apparently provided for cases where the auto-update feature is not accessible (which is my case, I cannot get in).
Can someone help?
Thanks in advance!
I changed computers, I installed X5, and I have run the 501 patch but get the following error for the 502 patch:
Unable to locate file.
c\users\name\AppData\Local\Temp\_isE5BF\RoboHelp Office X5.0.2 Update.msi.
I have tried saving/running the patch to the RoboHelp Office folder and I have tried saving/running the patch from this temp folder.
Has anyone seen this error before?
Similar Messages
-
How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated
FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap. -
ACR: .dng .jpg How to prevent highlights from blowing out yet again?
How can a .dng in ACR be "Saved As" a .jpg without the .jpg process blowing out the highlights all over again?
The affected images have to be tweaked yet again in ACR.Ed Gerson wrote:
All together now: Sigh.
I'm sighing, but not because CS4 is missing any functionality.
The point behind the little suggested workflow I listed above was that you do your color balancing, exposure, cropping, etc. in the Camera Raw tool and it stores metadata associated with each raw DNG file. Then you open that file through Camera Raw and use it for publication via whatever process you want.
Save images directly as JPEG from Camera Raw (if the sizes it offers are good for you).
Save images through the Image Processor, which automates some simple processing tasks for you (e.g., resizing).
Open individual images into Photoshop to post-process them (e.g., retouching a particular portrait or something).
The key here is that Camera Raw provides the same developing settings however you (re)open the raw file for each subsequent use.
If in light of all this you still DO want to save an intermediate file for later use, may I suggest .PSD format as that is a lossless format. Consider also saving in 16 bits/channel and ProPhoto RGB color space.
Lightroom is a possible alternative, as it's highly optimized for flushing a large number of images through a workflow pipeline, though I don't need/use it because my digital darkroom activity is more along the lines of individual edits rather than production work.
-Noel -
i make Rest for iPad, and now every time i open it , i chose the country and the network and tells me he works the activation and then tell me the iPad could not be activated, try again what can i do
Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
To unhide your purchases
Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
Scroll to the bottom of the main page.
If you're not already signed in, tap Sign In.
Tap your Apple ID name, then tap View Account.
Scroll down on the Account pane, and tap Hidden Purchases.
Locate the item you would like to unhide then tap the Unhide button. -
Why does iTunes say my gift card hasn't been properly activated yet?
I bought an iTunes card at a grocery store and when i got home to redeem the card a message popped up stating that the gift card hadn't been properly activated yet. Does anyone know why?
The people at the store it came from didn't activate it when it was purchased. Ask them or the iTunes Store staff for assistance.
(107697) -
I believe I have a problem when opening up my documents in finder. where upon I can view all my folders but with yet another Documents folder within this group, if I then click on this second Documents folder yet again a repeat of the do'cs folder appears. I have tried to merge the Documents folders into one but after a morning and a few hours later having completed the merge when I reopened the folders the problem was still there. Help.
SandraReset the PRAM
Reinstall the operating system from the dvd (you will not loose your data) -
I can't get my new iPad to record a video I see the video right above camera but it is not active yet I can't touch it to activate it.
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom -
The facetime app won't let me sign in anymore. I've been using it fine since Christmas, I haven't used my iPod Touch for about 2 weeks and now when I try to sgn in I get the message 'an error occurred during the activation, try again' what should I do?
After reading some posts, I see that it is cause by the date and time changing. I reset these ad now Facetime works OK
-
Can't sign in to messages on iPad mini says an error occurred during activation try again
An error occurred during activation try again comes up when I try to sign in to messages on my iPad
Hi krissi182,
If you are having difficulties with activation when using Messages on your iPad mini, you may want to follow the steps in this article -
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Thanks for using Apple Support Communities.
Best,
Brett L -
cant use my facetime keeps saying "an error occured during activation. try again" ????? need help
http://support.apple.com/kb/ts4268
-
i just created an apple ID and then tried to log in to facetime but, keep getting : an error occurred during activation, try again" can anyone assist?
i just created an apple ID and then tried to log in to facetime but, keep getting : an error occurred during activation, try again" can anyone assist?
-
Try signing into iMessage and FT and I get "an error occurred during activation, try again"
I get text messages from non iphone users but when someone with an iphone send s me a message, I don't get it. So I checked my settings under imessage and it says I'm not logged in. When I try to login, it says, "An error occurred during activation, try again." Nothing is wrong with my internet connection and I can download apps just fine. I went to Settings>Store and logged out of my account and logged back in and still have that problem. Any suggestions?
I get text messages from non iphone users but when someone with an iphone send s me a message, I don't get it. So I checked my settings under imessage and it says I'm not logged in. When I try to login, it says, "An error occurred during activation, try again." Nothing is wrong with my internet connection and I can download apps just fine. I went to Settings>Store and logged out of my account and logged back in and still have that problem. Any suggestions?
-
Yet again connection drops !!!
after the last fix speed was ok for a few months but now gone back to the same old **bleep**. Speed dropping to around 0.06mb having to restart modem cant do anything with broadband at all !
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
4.1 dB / 21.0 dB
Line attenuation (Down/Up):
45.6 dB / 22.5 dB
Output power (Down/Up):
20.4 dBm / 12.1 dBm
FEC Events (Down/Up):
176707827 / 443
CRC Events (Down/Up):
90654 / 432
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
295118 / 488
Error Seconds (Local/Remote):
5351 / 673wired and wireless, newist lappy is 1 month old the network cards in all the wireless lappys pcs are all "N" cards, even the kids wii or xbox keeps getting booted from the net, we used to have an acutal download speed of 5mb now its half of that yet again
must of restarted it self today at some point again
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 07:07:20
Downstream:
4.5 Mbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
7.8 dB / 20.0 dB
Line attenuation (Down/Up):
45.7 dB / 22.5 dB
Output power (Down/Up):
20.0 dBm / 11.9 dBm
FEC Events (Down/Up):
11781936 / 31
CRC Events (Down/Up):
2250 / 29
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
54586 / 29
Error Seconds (Local/Remote):
2399 / 24
Connection Information
Line state:
Connected
Connection time:
0 days, 07:07:59
Downstream:
4.5 Mbps
Upstream:
448 Kbps -
Although this forum has taught me a lot about screen
resolutions, view ports
etc. I am still struggling.
I am on a broadscreen laptop with screen resolution 1440 x
900 - at the moment
perhaps uncommon, but possibly gaining popularity.
I have a relativeley positioned div containing an absoluteley
positioned div,
that has an image in it, all in a table with fixed width.
The image in the absolute pos. div shifts as I change the
view port. Why is
that? I would expect it to always sit the specified px's away
from the
container div.
http://www.spinsister.nl/blog/index.php
, I am talking about the two pictures
in the entry 'Vanuit de verte', at the moment at the top of
the page.)
Sorry to have to ask about this yet again. I read Nadia's
article several times
and thought I understood, but obviously don't.
Regards,
Adriana.
[ put out the rubbish if you need to reach me by e-mail ]
www.spinsister.nlAnyhow, you need a) to validate the page, and b) to put a
valid and complete
doctype on it so that you get out of quirks mode.
</tr>
<tr>
<td bgcolor="#ffffff"><table width="770">
<tr>
<td valign="top" bgcolor="#ffffff"><div
id="entryview">
This is clearly invalid code, as is this -
</tr>
</tr>
Also, you have HTML in your CSS files (there should only be
CSS in CSS
files) -
<style type="text/css">
I see what you are experiencing, and my experience tells me
that something
on the page is working in ways that you don't expect.
Personally, I
wouldn't use a table-based layout at all, but I realize you
are already
committed to it. Also, try adding borders to this rule -
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to
prevent
overlaying*/
and you'll see that it's not being expressed at all. That's
likely the
source of your problem.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"A.Translator" <[email protected]> wrote in
message
news:[email protected]...
>> Seems to me that those two images are doing exactly
what you want them to
>> do (IE6 and FF1.5x). They retain their relative
position on any browser
>> viewport width.
>
> Not on any, at least not the way I understand view
ports.
> To illustrate my question I put two screen shots online
>
http://www.xs4all.nl/~hogen/voorbeeld/
>
> In both shots I hover over the thumb to expose the
larger image to the
> right. In the top one the off set works as intended -
notice: on the left
> FF's Webdeverloper's Toolbar CSS editor is open making
the viewport
> smaller.
>
> The screen shot underneath shows the same, but now in
full screen.
>
> Sorry for the horizontal scroll bar that you'll probably
get but you
> appreciate in this case I had to keep the images full
size.
>
> --
> Regards,
> Adriana.
> [ put out the rubbish if you need to reach me by e-mail
> www.spinsister.nl
>
> -
Please can somebody help me? My imessage does not work, I try to activate it but it says an error ocurred during activation. try again
Its possible that the server can be down now. Have you ever used it before? If you want, try resseting the phone by just holding the sleep/wake key and the home button together for 10 seconds. Then wait 5 seconds when it turns off and press the sleep/wake button to turn it back on. Then try it again. Let me know what the results are.
Maybe you are looking for
-
Can't Attach Files in 10.9 Mail via Menubar/Toolbar
All of a sudden I cannot attach files in Mail via menu commands. A selection (finder) window opens but all items are grayed out (no matter what location). I can still attach files by dragging them from the Desktop (or other location) into the body
-
Audio from Macbook Late 2008 to Samsung LE32R88BD Help!
Hi, I have am trying to resolve an audio issue: Samsung LE32R88BD TV Macbook 13" Aluminium Late 2008 From the Macbook I currently have an Apple Minidisplay adapter - DVI and then a DVI - HDMI connector into that, which has an HDMI lead running into m
-
After Updating to IOS 5, My Ipod Touch 4th Gen will not Sync!!
I updated my Ipod Touch 4th Gen to the ne IOS yesterday, and as soon as I did, I ran into a BIG problem. It will not Sync up with my Apple content on my Itunes what-so ever. I cannot even install any of my Apps, download my music, nothing! I do not e
-
How do I export an iPhoto slideshow to iMovie?
I made a 27 minute long slideshow with music on iPhoto but when I exported it to a Jump Drive, the music skipped and some of the photos got a little hung up as well. I thought if I could export to iMovie, I may be able to fix the skipping issues. I'
-
EXS Factory Samples And Sampler Instruments Duplicates and Missing Legacy
since updating and comparing to my macbook which i havent updated, it seems there are missing exs factory samples. for example on new logic 9 there are 2 folders exs factory samples which have 01 through 09 folders. the sampler instruments folder has