RoboHelp6 30 Day Trial Product Key?

Anyone know what the 30 Day trial Product Key is for
Robohelp6

Hi LoveTheSerenity and welcome to our community
The key is found on the page where you downloaded the trial.
It's listed in bold print immediately above where you clicked the
Download button.
Click
here to visit the page
Cheers... Rick

Similar Messages

  • Starter Pack now includes 60 day Eval product key for SLES

    Q1: What is the Starter Pack?
    The Novell Open Workgroup Suite - Small Business Edition Starter Pack is a product that provides a Customer with a no-cost, one-time, 5-user license for Novell Open Workgroup Suite - Small Business Edition. This is not a trial or evaluation license but a full product license.
    Q2: Am I required to purchase Maintenance with the Starter Pack?
    No!
    Q3: Are all the NOWS SBE components and add-on products included with the Starter Pack?
    No. Maintenance is required to obtain some of the component products and product updates. At one point there was a list of the additional products that were available to customers who purchased maintenance but I am unable to locate it, perhaps because NOWS SBE licenses can now only be purchased with maintenance.
    Q4: What is the issue regarding product keys for SLES?
    When NOWS SBE is installed, customers are required to enter product keys for each of these three products: NOWS SBE, OES, and SLES.
    Product keys are normally included with most products when the product is delivered however SLES product keys work a little bit differently. A SLES product key allows access to patches and updates and is provided when a customer purchases maintenance. Novell will provide a temporary 60-day "Eval" product key when a customer downloads an Eval copy of SLES. This subtle distinction goes unnoticed when NOWS SBE is delivered because NOWS SBE licenses can only be purchased with maintenance.
    Novell now delivers the Starter Pack with a 60-day Eval product key for SLES to allow customers to complete the NOWS SBE installation without having to purchase maintenance.
    Q5: What do I do if I need licenses for more than 5 users?
    Simply purchase as many additional groups of 5-user NOWS SBE licenses as you need. For example, if you had ten users, you could purchase the Starter Pack plus one additional 5-user NOWS SBE license.
    Note: Since NOWS SBE 5-user licenses can only be purchased with maintenance and customers with maintenance must purchase maintenance for all licenses, you would be required (in this case) to purchase maintenance for the 5-user license obtained with the Starter Pack.
    Q6: How do I get the Starter Pack? <customer>
    Your Novell Reseller can provide additional information and order it for you. Some conditions apply.
    Q7: How do I get the Starter Pack? <reseller>
    The Starter Pack is ordered through your distributor and delivered electronically to your customer. You may find the following Novell product codes helpful:
    Novell Open Workgroup Suite - Small Business Edition 2.5 Starter Pack 5-User License (873-010136)
    Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Priority Maintenance (879-000923)
    Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Standard Maintenance (879-000924)
    Upgrade Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Priority Maintenance (879-000925)
    Upgrade Novell Open Workgroup Suite - Small Business Edition 2.5 5-User License + 1-Year Standard Maintenance (879-000926)
    Novell Open Workgroup Suite - Small Business Edition 5-User 1-Year Priority Maintenance (877-001511)
    Novell Open Workgroup Suite - Small Business Edition 5-User 1-Year Standard Maintenance (877-001575)
    Disclaimer:
    I am not a Novell employee. While I believe this information to be correct as of the time of its posting, I encourage you to verify its accuracy for yourself before relying on it.

    KBOYLE,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Uninstall and Reinstall of MS Project 2013 Trial Product Key

    I am currently using the 60 day free trial version of MS Project 2013.  I have been using it for 11 days.  Can I uninstall it on one PC and reinstall it on another PC using the same product key if I am still within the 60 day trial window? 

    Hi,
    You can’t uninstall Project 2013 trial on one PC then reinstall it on other PC with the same product key. You can only activate Project 2013 trial on a single PC with the same product key.
    If you want to install Project 2013 trial on the other PC, you need to apply for a new account. Then download Project 2013 trial again via TechNet Evaluation Center on the new PC.
    You can contact local Customer Service Center. You can find local service center telephone number in link below.
    http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
    Regards,
    Greta Ge CHN
    TechNet Community Support

  • BO Integration Kit for SAP Product Trial Product key

    Hi Everyone,
    I have downloaded BO Integration Kit for SAP Product Trial but the product key mentioned on the website does not work..It says "expired"
    Can anyone please tell me where can I get it the current Product key from.
    As of now I don't have service market place id so cannot download the Product Key file from there.
    Regards

    Hi,
    trial keycodes can be downloaded from here:
    http://service.sap.com/licensekeys
    Ingo

  • Visio 2013 trial product key

    I was not able to get a product key. I was prompted to press f5 to refresh the screen, but the screen would refresh without a product key. I was able to install the file, but I can't use the product without the product key. Help.

    Hi,
    Try to reset IE to check the issue.
    Check the options and click Delete according to the following picture, then go to Advanced tab, click Reset. Restart computer then check the issue.
    Jaynet Zhang
    TechNet Community Support

  • Office 2013: Getting 5 days trial instead of 60 days

    I download 700MB Office 2013 from Microsoft's Technet Evaluation Center after learning (from the same website) that the evaluation period is 60 days. But after installing, the Office is saying that evaluation period is 5 days. I don't have product key to
    enter as Technet Evaluation Center gave this error:
    Your product key is:
    Error: 'Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.'
    I tried obtaining the key several times but every time the website gave the same error.

    Hi,
    Have you ever activated Office with this trial product key before?
    Or you can contact your customer service center to confirm the rest trial period. I’m unable to give you a definite answer on the forum.
    Global Customer Service phone numbers:
    http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
    Best regards,
    Greta Ge
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • Premier elements 4 Trial product AUDIO PROBLEMS

    I am using the PE4 30 day trial product as a basis to decide on whether to by PE 7 and am running into a signficant problem. The DVDs I recorded with my Canon camcorder play fine (both visually and sound wise) with MS Windows Media Player and Real Player but when I play the scenes using PE4 (I used the get media function to load tme into PE4) but the audion portion while consistent in volume chops off whole words/segments.
    I just exported the Audio portion (using PE4) of the clips in question to a file and they exported with no problems. I can hear it perfectly (no missing words/sounds) with MS Windows Player.
    Would appreciate input on what is causing the problem?

    Hi Steve, just getting back to this project..... A response from Canon indicated that the camcaorder files created by their product are .VOB files for video and .AC3 for audio and .IFO to integrate the video and audio files. Will the MPEGStreamclip a squared5 also handle these and be useable with the Power Director products? Also has PD 7 been released and does it address my problem without my going through a file conversion?

  • I cant activate my trial of office professional plus 2013 to work as it will not accept the product key

    I downloaded a 60 day trial version of office professional plus 2013. I dont think I activated it straight away and then when I tried to activate using the product key, I get trial configuration not completed successfully. Error 25004. Product key cannot
    be used on this machine. This is most likely due to previous office 2013 trials being installed.(system error : -1073422308) then another pop up says Repair office product suggested (system error: 0x800761ac). I have  not trialed this version fully as
    yet but would like to so how can I sort this out?

    Hi,
    You can use the following method to repair your office 2013 and check if it works fine:
    1.Go to Control Panel > Programs > Programs and Features;
    2.Click either Quick Repair or Online Repair.
    You might need to restart your computer after the repair is complete.
    If it doesn’t work, for the Error 25004, you should uninstall the existing version of Microsoft Office 2013 as mentioned in this KB：
    http://support.microsoft.com/kb/2792178/en-us
    Regards,
    Melon Chen
    TechNet Community Support

  • Lost key for 60 days trial version of Office 2007.

    Hi,
    I accidently deleted shortcut to 60 days tial which was included when \i purchased my laptop.
    Are there any ways ow to find this lost key?
    "To get a valid product key double click on the icon "Microsoft Office - 60 Day Trail" on the desktop an follow the instruction on the screen."
    I found one suggestion how to solve this problem however I dont have this icon on my desktop.
    Thanks.

    Using this shortcut you can start Microsoft activation assistant und request trial activations key.
    Shortcut target in properties is C:\Program Files\Activation Assistant for the 2007 Microsoft Office suites\ota.hta
    So try to find it in windows explorer and start from there. This is HTML application. When you start it you can get script error message but just click on YES and continue.

  • HELP URGENT How do I use an activation key to re-activate my 30 day trial ?

    I am asking this question on behalf of my sister-in-law who is on dial up in a rural area and recently purchased an iMac with the 30 day trial of i-work. She purchased an activaion key on line but does not know how to re-activate the existing software. She did not receive any e-mail on how to re-activate the existing software on the computer.
    What is the process at apple on how someone would re-activate a trial copy of i-work? Does she get an e-mail with the key and instructions on how to use it?
    Her children are in the middle of a project that is needed for school and they cannot get back in to print anything.
    Need your help ASAP.

    Welcome to the discussions, Desi.
    If Keynote is still on the machine, they should only have to double-click the icon. When the application opens, there should be a button to press to enter the registration number. Some details are here.
    http://docs.info.apple.com/article.html?artnum=301608
    I haven't had to do this myself, post back if it doesn't work.

  • I have cs3 and can't get to work on 8.1 windows.  Can I download a trial of Fireworks and use my product key for full activation?

    I use only Photoshop and Fireworks from my CS3 cd.  It is not compatible with 8.1 windows.  Can I download a trial of Fireworks from the Adobe site and activate by using my product key from the original cd's?  I have looked for patches and to no avail.  Please help me with this as I need for making prints of my oil paintings.

    I rarely use Fireworks for printing, but rather to render or perfect my images.  I have used Fireworks for about 17 years and just feel comfortable with it.  I use Photoshop as well, and see the simularities.  I see the handwriting on the wall with Fireworks maybe going to greener pastures, but still feel comfortable with it.  I received my original Macromedia cd from my Son as a gift and another gift years later.  I am launching a new art form, "Conceptual Art" on my site, and require Fireworks.  Maybe its time to cross over to Photoshop, I'll see.  Thank you for your answer and your time. http://www.baywoodgallery.com/

  • Server 2012 R2 Essentials Trial Installation from USB asking for Product Key

    Hi,
    I've just downloaded Server 2012 R2 Essentials trial iso from Microsoft site (http://www.microsoft.com/en-us/evalcenter/evaluate-windows-server-2012-r2-essentials).
    The downloaded iso file is 9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.iso
    I created a bootable USB using Windows7-USB-DVD-Download-Tool-Installer-en-US.exe installer and it automatically copied the server 2012 files from the iso file.
    Once my server (HP MicroServer) is booted up from the USB, the server 2012 installation is asking me to key in the product key.
    Please, can someone help me this. I just want to install a trial version.
    Thanks in advance.

    Try this: R9N79-23MWD-MBP9B-KHF8Q-C36WX

  • Cannot install Sharepoint 32bit due to product key issue - may have been used on Trial Office 2013

    Hi,
    I have a 32 bit version of Office 2010 Professional installed. I have attempted to install SharePoint 2013 but it fails saying the product key has been used before possibly in an Office 2013 trial version.
    Any idea how I circumvent this? Is it possible to get an alternative product key - although the install process does not allow a product key to be entered.
    Thanks,
    Alan Johnson

    What are you trying to install? It isn't 'SharePoint' as that doesn't have a 32 bit version. On it's own 'SharePoint' refers to SharePoint Server or Foundation, which are server products that you connect to from your computer but do not install locally.
    It is also not common to install Office on a SharePoint server (but not unheard of either).
    SharePoint Designer, which is very different from 'SharePoint' does come in 32 bit as does 'SharePoint Workspace'.

  • BO Edge Trial Install Error: product key invalid STW00140

    Hi,
    I am trying to install BO Edge trial version 3.1. But it gives me error:
    The product keycode you entered is not valid. STW00140
    after i enter the product key and hit next.
    Product key is the one I obtained from SAP after registering for the trial version. I am pretty sure that it is correct.
    I had Xcelsius trial and BO Client installed on this computer earlier. I did uninstall both of them and also deleted all registry entries.
    I also tried following this thread but that too didnt help me:
    http://www.forumtopics.com/busobj/viewtopic.php?p=594198
    OS is Windows XP.
    Please help me friends,
    Thanks in advance,
    CD

    Please explain how to get the Product Key to complete an installation if one downloads the Evaluation Copy of Crystal Reports.
    Thank you,
    Edited by: Douglas V. Wright on Sep 3, 2008 6:32 PM
    Edited by: Douglas V. Wright on Sep 3, 2008 6:33 PM

  • Activate full version of Visio Professional 2013 from Trial with Product key

    Is it possible to activate the full version of Visio Professional 2013 with the trial version of the software? I have an extra product key for the full version but no DVD. Thanks

    Hi,
    As far as I know, the trial version can not to use as the full version of Visio Professional 2013.
    You need to uninstall the trial version, then download the full version of Visio Professional 2013.
    Download Link:
    http://technet.microsoft.com/en-us/evalcenter/hh973399.aspx
    http://support.microsoft.com/ph/937/en-us

Maybe you are looking for