RoboScreenCapture default new size

Does anyone know how I can set the default size of a new
blank document? The square provided by default isn't big enough and
I'm having to scale the blank document to a larger size before
pasting an image in. Total pain.
The reason I'm doing this: The only way I know how to extract
an image from a Word document is by copying it in Word and pasting
it into a new (blank) document in an image editing program.
RoboScreenCapture is the only image editor aside from Paint that I
have available to me, alas.
And P.S. This, from Adobe:
quote:
Macromedia discontinued sales of RoboScreenCapture as of 1
December 2004. Support for RoboScreenCapture will continue through
1 June 2005.
OK, then why do I have a copy? It's because it
was bundled with RoboHelp 7.
So if it's still being distributed as an active product then
why isn't there support for it? /sigh

quote:
Originally posted by:
Peter Grainge
An alternative way is to save the Word document as an HTML
file. Word will put all the images in a sub-folder to where you
save the Word document.
Oddly, that option's not available in the
version of Word I'm using (2007). Word's help says that I could
save as PDF or XPS, or of course as an older version of Word.
edit: Wait, there it is. Hiding, it was! I must have looked
right past it before.
Hmm. Odd that Word's help didn't tell me where to find it, or
that it even existed. My faith in help is weakening...

Similar Messages

Cs6 opening existing file defaults to last new size created. How do I keep my file properties / size

cs6 opening existing file defaults to last new size created. How do I keep my file properties / size the same?

Is that all your HTML code contains?
Where are the closing </body> and </html> tags in the end?
Try adding this to the last lines of the file:
</body>
</html>
-ST

Desire a default window size when opening 2nd Firefox window, when 1st window is a narrow news streamer

Hi,
When I have a Nasdaq ticker running using firefox, then any time I open a new firefox window, it defaults in size to the small ticker window size. I then have to resize the window.
Is there any way to have firefox always open to a default size, regardless whether there are already other firefox windows open (of other sizes)?

So, there is no about config entry that you can actually manually set the specific window size, however there is an add on that allows you to set the size called [https://addons.mozilla.org/en-us/firefox/addon/firesizer/ Firesizer]. Try this out.

PRE10 - Pan and Scan Default New Frame Size

Is there a way to change the Default New Frame size for a project? I have about 4 or 5 frames per page all of which need to be enlarged and my project has a total of 90 pages. So a lot of extra time is spent resizing frames. I can set the default pan and scan times under settings but I have not found a way to start off with the correct size frame.
Thanks,
Joe..

Just wanted to thank you guys again. This all worked out perfectly. I had 92 photos which previously took me three days to put together and I did not like the results. Tonight it took me two hours and it came out ok (IMHO).
Resized all photos to 1000x751 (200dpi, 1.0 pixel size). They were 2832x2128 with 1.0 pixels
Created a new project with a default DV NTSC Standard format
Imported them into the project
Placed the first photo\scene in the timeline
I set 5 pan\scan keyframes. One overall and then 4 quarter frame size
Adjusted the lenth of the scene and pan and scan durations and saved it
Added the other 90 photos to the timeline
Copied the completed scene and then pasted the attributes to all the other photos except a few I didn't want to pan\scan
I selected the clips that had the attributes pasted to them and used the TIme Stretch to set the duration the same as the first pan\scan clip
Dragged and dropped a different transition in between each
Added titles to the beginning and end
Added sountrack music to the entire video
Shared\Exported out to MPEG with NTSC Standard 4:3 format
It took about 10 minutes to render instead of a couple hours
Is it great, to me, no. I need to work on a few things and perhaps even reshoot the pages of the album to get better originals (or take them somewhere and scanned on a larger scanner then I have to accomodate them). My wife loved it and on average I think it looks pretty good. But the process works and the time savings are incredible so the next one will be that much better.
So thanks again. I have lots more to learn but at least progress is being made.

Migrate "Default New Doc Sizes" into photoshop CC

How can I migrate these Default New Doc Sizes?
Is it just copy and paste - or is there an easy trick to it somewhere?
I don't want to enter all 200 default sizes again
Thanks

Moving this discussion to the Photoshop General Discussion forum.

How to change the default window size display font size on Lync 2013 main window?

Hi champs,
Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
Thanks,

Hi,
Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
If not, as I know, there is no natural way to change it.
If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to change default window size?

I'm using MX 6.0 on Mac... For some reason I can't figure out
how to change the default window size in the work windows. Every
time I open a new file to work on it opens to a smaller size than
the actual page is. When opening pages dozens of times a day, it
gets annoying to have to resize each time. I'm sure it wasn't
always like this, but I can't figure out how to change it so the
default size that it opens to each time is larger.
Thanks for any help,
DD

Window | Workspace | Save Current
This gives you the opportunity to save a current layout look
that you like
You might also look under
Edit |Preferences | Status bar - but I don't see that this
does anything
in DWCS3

How to change the default font size in X11?

I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).
The default font size in the Xterm is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
Is there a way to change the default font size "permanently" in XQuartz/X11 ??
This may be a stupid question to ask in the developer forum but i cant really solve it.
There's only config. file ~/.Xdefaults they have mentioned so far on Google but i really cant find it regarding to the directorty.
Thank you very much in advance.

You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
I wish that Apple would invest more in discussion, and going towards making this more practical.

How to change the default font size in XQuartz?

I was a PC/linux user and have switched to use Mac lately (MBP Snow leopard 10.6.8).
Everything's been running perfectly on Mac so far and I really like it, until I have to run some programs on XQuartz/X11 (XQuart 2.7.0).
The default font size in the terminal is too small. And I hate it that I have to change it everytime i open a new terminal (via vt fonts menu, ctrl+right-mouse click).
Is there a way to change the default font size "permanently" in XQuartz/X11 ??
This may be a stupid question to ask in the developer forum but i cant really solve it.
There's only config. file ~/.Xdefault they have mentioned so far on Google but i really cant find it regarding to the directorty.
Thank you very much in advance.

You would be surprised to find out that is not like this, to get your account blocked you really need to do a lot of damage and posts are not removed unless they are illegal, and *always* it needs more than a person to delete something. That's a site managed by the community, not by some people put in place by a company.
It is always acceptable to link to external resources as long these resources do provide additional usefull information. Clearly the thread on that side contained much more information than the one here. I observed people linking from there to this forum, but it's not so common, and that's not due to the policy, just because here is more chat and less usefull information.... you will not see endless threads of replies on with "yes, I have the same problem" there.
Shortly, this is "discussions" and is quite different in approach than the SE model, where everythign is aimed towards getting the be answers UP and removing all the nonsense.
I wish that Apple would invest more in discussion, and going towards making this more practical.

How to change Default document size for CC Library Graphics (InDesign)

Good morning --
I have just discovered the amazing uses of the CC Library setup in InDesign and would love to be able to use it as a tool to collaborate template galleries amongst coworkers.
I work in an industry that offers many different templates for our Marketing pieces available to the sales team. What we have in place right now is about 50+ different templates in their own packaged files. Now, this isn't all that difficult to maneuver around, but the CC Library has made it so I can "drag and drop" templates into place. This drag & drop feature is easy enough for me to grasp, and with the proper training it should be with the rest of the team (should being the keyword). However, in some cases if you double-click on Library graphic it opens the file in it's own editable file with a custom document size of 8.5x11 Portrait (which I imagine to be the internal InDesign preset).
My questions therefore are when I double click on the library "Graphics" can the document size be anything other than 8.5x11? Can each Graphic have it's own document preset?
- If I open a file that is set for landscape, all of the "Graphic" falls off of the spread.
- Some "eblasts" are much longer than 8.5x11 (sometimes as much as 8.5x20), thus knocking some of the "Graphics" into that weird space area.
Please let me know if I am not being a clear enough.
Thank you!
Steve

@Steve – you are totally clear what you are doing and what you like to do.
But I fear an automatic setting that is creating the page size according to an asset's size does not exist right now.
I can change the size of a new document beforehand, if no document is open and create a new size in the document's properties dialog with the keyboard shortcut alt + cmd + p (in my German InDesign on Mac OSX 10.7.5). But you have to know in advance what size that should be.
Example: If I chose A3 instead of A4 (my default) when no document is open and double click an asset in a CC Library the asset will be placed in a one page document sized A3.
1. Changing the size (no document is open) in my German UI of InDesign CC-2014.2:
2. Double click and the result is according to the settings I made:
Uwe

Default view size/location for files in Preview?

Hello,
This is probably a stupidly simple question, but is there a way to set the default location and size of all pdf files opened in preview?
I know how easy it is to set window parameters in the finder: simply resize the window before closing and it remembers the new size/location. Preview will remember the location when the app remains open, yet when I quit the program and open the same PDF file again, its back in its original location, which somehow got set off center on my 2nd monitor so it cannot be read without constantly adjusting upon opening. (example: http://www.avartists.com/Picture.gif
As you can imagine this can get VERY annoying. Any help in fixing this issue would be greatly appreciated! Thanks in advance for your help.

Deleting the plist file had no effect whatsoever with my Preview. You can try it if you want. If you have custom settings of various sorts you can just move the plist file to the Desktop, then start Preview. If the annoying behavior is gone then you can toss the file on the Desktop and keep the new plist file. If it still behaves the same way and you want whatever preferences you had set before, just quit Preview and move your original file back, say yes to the "replace dialogue" and you're back where you were.
Francine--who obviously has spent way too much time on stuff like this!
Francine
Schwieder

How do I set default font size?

Some programs (most importantly for me, Thunderbird) use a default font size that is too small for my eye comfort. Some (such as Firefox) allow me to change the font size, but Thunderbird does not (though there is a menu item to change font size, which does not work).
I gather that such programs are using a default system font size. So I would like to change this. Some Help articles suggested that I could do this from the Font Panel, but they give no indication where to find the Font Panel. I cannot find it in System Preferences or via the Spotlight.
I am using OS X 10.4.7
I am computer-literate, but new to the Mac, having had this computer for about a week and a half.
P.S. In Thunderbird -> Preferences -> Fonts there is an option to configure the fonts used by Thunderbird. The settings affect messages, but not the main window with the message list. However, at this point I'd really like to set the system default so all programs that use the system default will be affected.
Thanks.
Daniel

This still does not work.
I tried all of them.
Theme Font & Size Changer
Big Buttons
Default FullZoom Level
NoSquint.
It only works for that page of that web site, as soon as you leave you start all over again.
Can't we just say Firefox messed up and needs to revert to the way it used to work without have to do ANYTHING to adjust any sizing.
This is utterly ridiculous.
It's a web browser for GOD sakes...not the OS. It shouldn't be doing anything but displaying web sites with NO INTERVENTION by the user for each and every page.
Why are programers always looking for ways to take a working product and make it useless???

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in private browsing?

How can I set a DEFAULT zoom size at ctrl+++ that will hold while changing sites--even in Private Browsing?
I'm just starting using Firefox but I won't be using it for long if I have to re-size the screen with every new location viewed.

Try this add-on
[https://addons.mozilla.org/en-US/firefox/addon/6965/ Default FullZoom Level ]

How do I change the default paper size for printing?

I am running Firefox 3.6.3. Recently, the default paper size for printing unexpectedly changed to a user-defined size of 3.00" x 4.57". It used to be letter size (8.5 x 11). The default paper size is 8.5 x 11 for everything else. I have tried changing the size in the preferences dialog box and then clicking "default", but after I close Firefox or if Firefox opens a new window, the default size switches back to 3.00" x 4.57". Does anyone know how to fix this?
== This happened ==
Every time Firefox opened
== About 2 weeks ago

In "mine" dutch firefox 3.6.12 there is no option to change paper-size see
"about:config" Promise to be careful (and be!) Enter "print.postscript.paper_size" gives a empty screen
"paper_size" gives a few results
What about the numbers 4259872, 4784247 and what is the meaning of
paper_size, paper_size_type , paper_size_unit

Default Document Size

I recently was working on a design for a #10 commercial envelope in InDesign. Ever since then, it seems that #10 envelope has become the default document size that InDesign selects when I create a New File. How can I change the default new document settings?

Jongware: "You change the default for new documents the same way as just about everything else in InDesign: change it with no documents open. In the case of a default new document size, close all documents, then call up the Document Setup dialog. Set you size and OK the dialog. Done."
I don't get that behavior. If I call up Document Setup, set the size, and OK the dialog, then close the document, the new setup is not saved. I think it's better to call up Document Setup, set the size, and then click the Save Preset button; save the Preset as [Default] in the pop-up menu so that it overwrites the previous Default setting.

RoboScreenCapture default new size

Similar Messages

Maybe you are looking for