RoboSource Control Server 3.1 on Windows Server 2008 64-bit?
I was wondering if anyone has had any success running the RoboSource Control (Server) on Windows Server 2008 R2 64-bit. I experienced two dialog boxes near the end of the install.
Item has already been added. Key in dictionary: '_reserved_lastInstallerAttempted'
Key being added: '_reserved_lastInstallerAttempted'
and
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2869.
Then, it backs out all the changes it has made, and exits the installer. At least it fails gracefully ...
The reason why I ask this is mostly due to the fact that Windows Server 2008 R2 is ONLY issued in 64-bit editions. There will be no more 32-bit editions.
Although this post is three years old, I am getting the same problem now (June 2012) trying to install either the Client or Server components on a Windows 7 64-bit system. If anyone out there knows of a solution to this, I'd appreciate a reply.
Similar Messages
-
Installing Application Server 10g R2 on Windows Server 2008
Hi all,
I want install Oracle Application Server 10g R2 on Windows Server 2008 ( 64 bit).
It always prompt error "ORA-12560: TNS Adapter error", when I try to install Oracle Application Server Infrastructure 10g.
Does anyone know how to solve this problem?
Thanks in advance.
Regards,
MKBHBasically use for internal web server only. I'm not sure can I use Oracle weblogic 11g instead of OracleAS 10g R2. I'll use some of the components like Oracle HTTP Server, Oracle Application Server Containers for J2EE(OC4J), Reports Services, Forms Services, Metadata Repository for Oracle Application Server Middle-Tier and etc.
-
Hi
Getting this error while installing hub transport role of exchange server 2010 sp1 on window server 2008 R2.
Hub Transport Role
Failed
Error:
The following error was generated when "$error.Clear();
if ($exsSid -eq $null -or $exsSid -eq "")
$exsSid = get-ExchangeServerGroupSID -DomainController $RoleDomainController
start-setupservice -ServiceName MSExchangeADTopology -ServiceParameters $exsSid,$RoleDomainController
" was run: "Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.".
Service 'MSExchangeADTopology' failed to reach status 'Running' on this server.
Click here for help...
http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
Elapsed Time: 00:25:35
Sandeep GuptaHi,
It might be a permission issue.
1 :
Add Manage auditing and security log Properties
Administative Tools > Local Security Policy > Local Policies > User Rights
Assignment > Manage auditing and security
Add
Exchance Servers.
2. Check Exchange Trusted Subsystem
1)Open Active Directory Users and Computers
2)Under domain name (For example contoso.com),navigate to the Builtin Container,on
the right hand side select the Administrator group,goto the properties
3)Click members tab and add Exchange Trusted Subsystem
4)Click ok twice
5)Reboot the Exchange server
6)Rerun the Exchange setup
Best Regards! -
In my sharepoint 2007, I have upgraded the OS from windows server 2003 standard to windows server 2003 enterprise R2 SP2. After the OS upgrade when I run the central admin it's showing this error "Microsoft Windows Sharepoint Services 3.0 Error 2908
error has occurred" screen shot below of the error.
Any help?Not sure I can help. In general MS does NOT support the upgrade of the Underlying OS without re-installing SharePoint. Many of the prerequisites that were installed when SharePoint was installed are OS specific. You can either contact
Product Support and see if they can provide any assistance or re-install SharePoint from scratch and re-attach/migrate all the existing databases with content into the new system on the new OS.
Paul Stork SharePoint Server MVP
Principal Architect: Blue Chip Consulting Group
Blog: http://dontpapanic.com/blog
Twitter: Follow @pstork
Please remember to mark your question as "answered" if this solves your problem. -
How can i install application server 10g R2 on windows server 2008
Dear friends,
I need to install application server 10g r2 on windows server 2008.
Is there any patch for this. where can I get those patches?
plz help.
Divya AlokMKBH wrote:
Why OracleAS 10.1.3.x version doesn't have OracleAS Infrastructure components?Because not all OAS releases were complete software versions. By complete software versions, I mean they were not a software version where each component (like Identity Management, Portal, BI, SOA Suite, etc.) would have an updated version.
OAS Release 2 (10.1.2.x.x) was a complete release but OAS Release 3 (10.1.3) was not. After release 2, Oracle Fusion Middleware OFM 11g is now a complete release.
OracleAS Identity Mgmt (10.1.4) was the updated version of OAS Id Mgmt after OAS 10.1.2 and before OFM 11g. -
Can I use Azure Backup and Windows Server Backup in a Windows Server ?
Can I use Azure Backup and Windows Server Backup in a Windows Server ?
I want to use both Azure Backup and Windows Server Backup for two senarios.
For Disaster Recovery = Azure Backup to Azure Storage.
For non-Disacter Recovery = Windows Server Backup to a on-premises disk.
The non-Disaster Recovery mean a file or folder recovery, disk crash recovery, migrate to another servers.
The non-Disaster Recovery need the speed of recovery just like 10 TB recovery as soon as possible.
If I can use both Azure Backup and Windows Server Backup in a Windows Server,
Are there any notes for using both ?
Regards,
Yoshihiro KawabataHi Yoshihiro Kawabata,
Thanks for posting here!
Azure Backup to Azure Storage and Windows Server Backup to a on-premises disk. These are two different question and can be answered individually.
Azure Backup to Azure Storage - Possible.
Windows Server Backup to a on-premises disk - Possible.
Can I use Azure Backup and Windows Server Backup in a Windows Server? Is a question.
I will check on this and get back to you at the earliest.
Thanks!
Sadiqh -
Applications server 10g R2 certified windows server 2008.
hi all.
can anyone help me out.Is application server 10g R2 and windows server 2008 certified or still not certified?
any suggestion?
sarahPlease see this link.
http://www.oracle.com/technology/software/products/ias/files/as_certification_r2_101202.html#BAJGCBEA
AMN -
We are setting up a new environment for a client based on Citrix XenApp Server 6 running on Windows Server 2008 R2 which is virtualized on a VMWare hypervisor. Client uses Firefox and we need to know if it is going to work or not. If not, what is the root cause (i.e. XenApp, Windows Server 2008 R2, virtualization).
Thanks again! :)I only ask because, in the past we were able to install a related product, InDesign CS5 in Citrix. In fact, Adobe had published documentation for doing exactly that: here. I just haven't seen anything similar for Illustrator CS6 and wanted to check.
-
Backing up Exchange Server 2013 CU3 with Windows Server Backup Program
Looking at configuring Windows Server Backup Program to backup Exchange Server 2013 CU3 which is a member a DAG Group using a specific Backup Domain Account.
From my understanding from the following technet Article" Using Windows Server Backup to Backup and Restore Exchange Data" at http://technet.microsoft.com/en-us/library/dd876851(v=exchg.150).aspx I cannot use wbadmin.exe has it uses an older
unsupported version of Powershell.
My question is what are the minimum AD rights required for an AD account needed to be able to backup/restore Exchange Datastore using Windows Server Backup Program in Windows Server 2012?
Thanks,
NIckHi Sathish,
After looking at your response, it all make sense except when I look at what exchange right assigned via RBAC. I understand that the backup service account will require access to the exchange databases
to be able to backing and restoring them. After looking at the different roles
I'm wondering if I require to assign both the Databases roles for Backing up the databases and the Disaster Recovery Role as well to be able to restore the databases has well as having a mailbox on the exchange
server for the backup service account?
Below is explanation of the roles via the ECP
Database Role
This role enables administrators to create, manage, mount and dismount mailbox and public folder databases on individual servers.
Disaster Recovery
This role enables administrators to restore mailboxes and database availability groups in an organization.
Thanks,
Nick -
SQL Server 2012 Express on Window 8.1 64 bit version?
Hi,
I´m trying to install SQL Server 2012 Express on Windows 8.1 64 bit version. When I reach the point of "Installing Setup Files", of the installation process, the installation seems to halt. I´ve tried both the 32 bit and 64 bit versions of SQL 2012
Express. I´ve installed SQL 2012 Express several times before on other Windows versions but I´ve never encountered this problem. Is it a known SQL Server 2012 Express/Windows 8.1 64 bit compability problem?
Thanks in advance!
MartinSQL Server 2012 express can be installed in windows 8.1 all you need to take care is that you meet
hardware and software requirements . Please read the article in hyperlink carefully.Make sure you have internet connection because it is required. Make sure you meet all .net
framework requirements
Below link would be helpful as well.
How to use SQL server on Windows 8 environment
Please remove any previous failed installation of SQL server from add remove program. If you still face issue please refer to Solution section of
this link for manual un installation.
Finally you can locate log files present at location
C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\summry.txt for details about log
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles -
Migrating DHCP Server From OpenSuse to Windows Server 2008 R2 Standard
Hello,
I'm planning to migrate a DHCP server from OpenSuse to Windows Server 2008.
Is there any procedures for that ,Or should i configure my Windows server 2008 DHCP service again.
Thank youHi,
I have done somthing similar in the past. Basically i got exported all the scopes and settings from the linux dhcpd service, then created the scopes in Windows, stop linux dhcp service and start windows one. Use conflict detection setting to leverage any
IPs lease from linux server.
Hope it helps.
Regards,
Calin -
Auto rollback with no error when upgrading windows server 2003 sp2 to windows server 2008 R2
Hi, I have a server needs to upgrade from windows server 2003 sp2 to windows server 2008 r2.
It should be supported from technet site
And yes, it went through all the list of upgrade. After rebooted, it told me "the upgrade was not successful, Your previous version of windows is being restored. Do not restart your computer during this time.".
Is there a place located the upgrade failure log? What's the common cause about the auto roll back?Thanks for the reply.
I copied some sentences in Setuperr.log
2014-07-10 23:58:33, Error
Failed to find driver file path. Error=00000002x[gle=0x80092004]
2014-07-10 23:58:45, Error [0x0805e6] MIG File 'C:\WINDOWS\SysWOW64\cpqteam.cnt' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-10 23:58:45, Error [0x0805e6] MIG File 'C:\WINDOWS\SysWOW64\cpqteam.hlp' is unsigned! (Failed with error code 0x2 (2): Failed with error code 0x2 (2): Failed with )[gle=0x00000490]
2014-07-11 00:06:19, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll,
{8179C2CA-2B60-49D6-BC81-D796378B024E}, 0) failed, hr=[0x80070003].
2014-07-11 00:06:20, Error [0x08085e] MIG UpgHost: CMigPluginSurrogate::LoadDllServer: Invalid argument: BinaryPath=[C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer\MediaPlayer-DLMigPlugin.dll]
does not exist.[gle=0x00000003]
2014-07-11 00:13:58, Error [0x0808ff] MIG COutOfProcPluginFactory::CreateInstance: m_currentHostSurrogate->LoadDllServer(C:\$WINDOWS.~BT\Sources\dlmanifests\Microsoft-Windows-MediaPlayer-DRM-DL\drmmgrtn.dll,
{743B7FD2-8427-4B7D-B330-A95618DE2BFC}, 0) failed, hr=[0x8007007e].
2014-07-11 00:18:56, Error [0x0803db] MIG IndirectKeyMapper: Cannot find the currently loaded location for hive X:\Documents and Settings\####\NTUSER.DAT; giving up (2).[gle=0x00000003]
2014-07-11 00:30:58, Error SYSPRP SPPNP: Error 0x25 (CONFIGRET) occurred while determining the buffer size needed to hold the list of devices that are using service
usbhub20.
2014-07-11 00:30:58, Error SYSPRP SPPNP: Error 0x424 occurred while opening a handle to the service usbhub20.[gle=0x00000424]
2014-07-11 00:38:08, Error [0x080973] MIG Ignoring apply for object: C:\WINDOWS\Panther\setupact.log[gle=0x000003f0]
2014-07-11 00:38:08, Error [0x080973] MIG Ignoring apply for object: C:\WINDOWS\Panther\setuperr.log[gle=0x000003f0]
Is it caused by driver error, MediaPlayer-DLMigPlugin.dll
and drmmgrtn.dll? -
The Windows Server 2012 R2 and Windows Server 2012 BranchCache Deployment Guide is now available for download in Word format in the TechNet Gallery at
http://bit.ly/1pYZT3F
Thanks -
James McIllecehello again,
meanwhile I was lucky to find this article about Idenity Mapping in TechNet in the Storage Team Blog:
http://blogs.technet.com/b/filecab/archive/2012/10/09/nfs-identity-mapping-in-windows-server-2012.aspx
Likely to be overseen at the end of one paragraph it says:
"Client for NFS does not support NFS V4.1 in Windows 8 or Windows Server 2012"
Question : Is this an official statement and is it still valid with most recent
Windows Server 2012 R2 that NFS client does NOT support NFSv4.x ??
thanks - Rainer -
Error 0xE0000235 when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
Unfortunately, Error 0xE0000235 occurs when trying to download a driver onto Windows SBS 2008 64-bit Standard FE.
I am installing the GV 800 GeoVision 32/64Bit 16CH Video Capture Card onto the server.
Please urgently assist.
Answer in clear English. Cryptic answers not welcome. Yes...I know you are an intelligent, highly valuable expert on the world's leading edge technology.Hi, I'd like to inform you that the error code 0xE0000235 refers to "Error in WOW64". This can be caused by corrupted or incompatible driver of the Video Capture Card. Similar issue may also occur on other driver on other operating system and I don't think
this can be caused by SBS2008 blocking the driver.
I suggest you contact with GeoVision Technical Support (http://www.geovision.com.tw/english/4_0.asp) and see if their driver should work on SBS2008 and make sure that you have downloaded
latest driver from their site:
http://www.geovision.com.tw/english/5_2.asp
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Hope this helps!
Sean Zhu
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
OBIEE 11.1.1.5 on windows 2003/2008-64 bit &certification matrix confusion
Dear Friends,
Please let me know that whether OBIEE 11.1.1.5 can be installed on windows 2003/2008 (64 bit) servers?
The reason is I could see 11.1.1.5 downloads for Windows/ Linux/solaris ...
But in the certificatiomn matrix (excel file - bi-11gr1certmatrix-166168.xls) when I look for 11.1.1.5+ i could see the supported platforms are solaris,HP-unix and Exa logic
but for 11.1.1.3+ i could see the supported platforms are windows/linux/solaris/HP-unix....
Same thing for supported browsers
11.1.1.3+ supports IE,Firefox whereas
11.1.1.5+ supports only safari
I really what to know where does the OBIEE 11.1.1.5 version fits in
11.1.1.3+
(or)
11.1.1.5+
which one i have to consider?
Please clarify
Regards,
DBHi,
OBI 11.1.1.5 is certified for Windows 2003/2008 64bit. The + (plus sign) must be interpreted as 'and above'. So Windows 2003 64 bit is certified for 11.1.1.3 and above (like 11.1.1.5).
With the release of 11.1.1.5 additional platforms are certified (like Solaris), those are listed as from 11.1.1.5 and above.
Regards
Maybe you are looking for
-
EXCH 2010 auto account creation fails after rollup 4 for sp 3
We use a PowerShell script to automatically generate student accounts when they register. It was working fine until the other night when we applied updates (I can supply the entire list if needed.) Rollup 4 was one of the updates. Now when the script
-
Problem writing meta data changes in xmp in spite of enabled settings
Dear Adobe Community After struggling with this for two full days and one night, you are my last hope before I give up and migrate to Aperture instead. I am having problems with Lightroom 5 writing meta data changes into xmp and including development
-
How do I make changes in face time?
How do I set up or make changes to which email addresses in my address book are the ones to set up for face time?
-
ARD 3.1 client upgrade issues
It seems that upgrading clients from the Admin console after installing the 3.1 upgrade is hit or miss. I am unable to upgrade more than 4 or 5 clients at a time. In some cases it won't even upgrade one. The error I get is when it's copying the clien
-
Export Movie doesn't launch AME !
Hi there. I'm very used to work with Premiere Pro CS4, After Effects CS4 and all Adobe package. Now I'm having for the 1st time an issue while trying to export my movie from Adobe PRemiere. Doing all default actions, I go to : File > Export > Movie.