Robotic voice sound?

is there a setting on Garageband that makes your voice sound kind of robotic, if you know what i mean?

Not really. What your looking for is a Vocorder and now there finally is one that works with GB
http://www.prosoniq.com/audio-plugins/orangevocoder10ae/

Similar Messages

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Suggestions?

I am trying to simulate the robot voice synthesizer sound that is produced by that electronic voice simulator after someone as had their voice box removed. The vocal transformer insert in Logic Pro doesn't quite do it. Any Suggestions?

Try one of the Audio Voice Effects like Alien / Cosmic / Robot… etc. to start with…
Adjust the Settings in the Inspector to your liking…

Is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

is it possible since I updated snow leopard to mountain lion that my isight mic doesn't work properly my voice sound like a robot

Speaking sounds like a Roboter Voice

My New iphone5
Sometimes the Voice Sounds like a Roboter while I am talking. I restarted the phone and also tried to reconnected ist with iTunes.. What else can i do?

I'm running the sound through a behringer mixing board, but it doesn't have any effects on it. I'm just running it from that through to the input in the mac. Don't have any other audio interface.

New S-voice sounds like a robot

After the recent update, the voice assistant sounds very robotic. Anyone know how to restore the old, more human-like voice?

Check out the thread Horrible new robot voice in Navigation
Go to Setting -> Accessibility -> Text-to-Speech Options and try different options till you get what you like.

Blue Yeti Pro Microphone robot voice

For some reason when I record using my Blue Yeti Pro microphone, it's a lot of times a robot voice. I really can't figure out what's the problem, no matter what USB wire I use. I often record my screen using Screenflow, it records it like a robot voice, since a few days, before it didn't do that. I've tried connecting the USB to my keyboard and my mac, it doesn't work, sometimes it won't even output or input anything. Also when I skype or use teamspeak, other say that after a while I sound like a robot, this really bugs me, I just recorded over 3 hours for youtube, after I had finished, I realised my voice was like a robot all the time, I raelly get ****** of this.

Hi Tom,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back

Since when did Siri get a robotic voice?

I don't know if this is an issue with 6.0.1, or the full restore I did on the iPhone 5, or Apple tweaked something when they launched iTunes 11, but Siri suddenly sounds horrible. She sounds like the robot voice from a late 90's automated customer service menu. Is there a fix in the works? Why isn't this being publicized? It's been observed on my device for over 24 hours.

Qrtrmstr wrote:
I don't know if this is an issue with 6.0.1, or the full restore I did on the iPhone 5, or Apple tweaked something when they launched iTunes 11, but Siri suddenly sounds horrible
It is an issue with your iOS install/restore not iOS in general. Restore it again.

How do you make a voice sound "creepier" in SP

Anybody know a process filter or group of filters to make voices sound creepier?
Thanks.

can you be more specific? creepier how? what style creepy?
Use EQ to filter out the higher and/or mid frequency bands. If you need person to sound like they are speaking on telephone, preset is there.
Use the vocal transformer plugin. Some good presets there.
Subtle use of distortion plugins or Guitar Amp plugin
Space designer - try some warped effects.
JG

HT1414 When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP :) thanks!

When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP thanks!

When I record videos, there's no sound recorded. But I tried recording a voice memo, there is a voice/sound recorded. Mobile technicians said I need to restore the phone to factory settings. HELP thanks!

Changing voice sound from a garage to a rainforest ? in FCP

I have just greenscreened 2 people in a garage, so have a garage contained slighly reverb voices sound..In the film they are speaking in a giant rainforest..
What is the best easiest way to change the sound so they sound as though they are in the open?
What filters to I look at in Audio filters in FCP ?
Any feedback very much appreciated.

yep already got the bird, gentle river, monkey and ambient music along with a few headhunter noises!?...will try noise gate and experiment there...
I'm sure alot of people are going to be recording greenscreen in a garage or small hall..its sure a major problem trying not to get a reverb sound from external mic and then trying to get rid of reverb as you say.
Thanks for the advice Jim, appreciated.

Voices sound like chipmunks on computer, not on ip...

I have Skype on my computer and iphone. Suddently my voice sounds to others like a chipmunk, and their voice sounds like a chipmunk - also on Skype test call. I have uninstalled, reinstalled, updated, unplugged, replugged, etc., till I'm blue in the face. I need this for work.
HELP!!!!
Solved!
Go to Solution.

chip2 wrote:
Hi,
I have the same issue on my HP Win8 desktop.My voice is disguised as chipmunk to the other party. I can hear everybody fine. I followed the exact instruction and tried search for the folder named "Skype" through writing %appdata% in the Search /Run box as I've read in the previous post, but it did not find a such folder. I don't have a problem using Skype on my laptop supported by Win 7. Anybody out there knows how to fix this? I reinstalled Skype and still the same.
What is the version of Skype program installed on your computer? In Skype go to Help -> About Skype.

Converting cassette to cd using garageband. Voice on cassette sounds like chipmunk. Is there a way to fix the speed during recording on garageband, so the voice sounds normal?

Librarian Asst. needs your help! Trying to preserve WWII veteran's interviews presently on cassette. However, on one cassette the voices sound like chipmunks (speed too fast during recording). I know how to transfer the cassette recording onto garageband. I just don't know how to transfer the recording at a slower speed, so that the voices will sound normal. Is there a way? Please help. Thanks.

You could try two things (sorry, I can only point you to the current settings in GB'11, since I no longer have GB '09) but it should be very similar.
The easiest thing would be, if the vocal transformers do work. You can change the pitch of a voice using a "Vocal Transformer" effect. Click the "Edit" tab in the "Info" panel and click an empty brick to add a filter:
If that does not work, try to change the timing of the track. Enable "Follow Tempo&Pitch". If GB '09 does not have "follow tempo & pitch", record your tape directly into a Real Instrument track in GB to record a purple region.
Use the tempo slider in the LED display to lower the tempo, till the recording does sound more natural.
Good Luck,
Léonie

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums.

My iPhone 4 microphone that handles standard voice/sound cannot pick-up sound unless the speakerphone, or a headset is used to make/receive calls the other end caller cannot hear me. Any Suggestions? This seems to be common on forums. Thank You

Same issue on my wife's iPhone 4S. I suspect it is related to the recent 6.1.2 iOS update (Note: I have a 3S and the update did not cause any issues).
I've tested both bottom and top mics on the 4S using video recorder and both mics work fine. Speakerphone and headset during calls also work fine. The issue is only related to the bottom mic while making calls. I can hear the caller but the caller cannot hear me. If I hold the mic very close to my mouth, the caller can hear a very low level signal.
The problem appears to be software related, not hardware.

Robotic Static Sounds USB Headset

Issue: When using any USB headset or USB audio input device on any Macintosh with any operating system from 10.5.7 to 10.6.1, after about 10-20 minutes of use, all audio from the headset becomes garbled and has a robotic static sound quality.
Tested with: Dozens of different Macintosh Computers over the last 6 months with different USB headsets and microphone input devices.
Reproducable: Yes, via either Garageband, Ventrilo or a number of other software applications that do USB Audio Input
References:
http://www.ventrilo.com/forums/showthread.php?t=37302
http://forums.worldofwarcraft.com/thread.html?topicId=17367983174&sid=1
http://discussions.apple.com/thread.jspa?messageID=9983346&#9983346
http://ministryoftruthblog.blogspot.com/2008/10/fixing-usb-audio-static-on-mac-o sx.html
http://forum.skype.com/index.php?s=d9c3718b7185c8e1caee585c248c3bab&showtopic=75 528&st=40
Additional Information and attempted fixes:
• Tried it with a powered USB Hub
• Switched the Audio Midi Setup input to 48k
• Using Audio Midi Setup to create an aggregate device
• Tried it on different Macs, Different Headsets and Different physical locations
• Tried different USB ports
Message was edited by: Jaycyn

I have a 27-inch i7 iMac running 10.6.2 and I can confirm that replacing the kernel extension from 10.5.6 works just fine. I had been having this problem every since 10.6.2 (for some reason it worked up until then). I don't think this fix will work if you are booting with the 64-bit kernel (the default on ALL macs is to boot the 32-bit kernel so you would specifically have to be doing this). I haven't tested it in 64-bit though.
Here are the steps I followed:
1) Download the AppleUSBAudio.kext from 10.5.6 from the following URL.
http://evo-wiki.cern.ch/twiki/pub/FAQ/AudioProblemMacOSX1057/AppleUSBAudio.kext. zip
2) Unzip it.
3) Open up terminal
4) Make a backup of the existing driver by running the following in terminal
cp -Rp /System/Library/Extension/AppleUSBAudio.kext ~/Documents/AppleUSBAudio.kext-BACKUP
5) Exit any applications that are using a USB audio device and unplug all USB audio devices.
6) Unload the existing AppleUSBAudio driver from the kernel by running the below command in terminal.
sudo kextunload /System/Library/Extensions/AppleUSBAudio.kext
If you get an error saying " not found for unload request" your fine. If you get an error claiming it can't be unloaded because its in use (don't have the text in front of me) then stop and go back to step 5.
7) Remove the existing driver by running the following in terminal.
sudo rm -rf /System/Library/Extensions/AppleUSBAudio.kext
8) Put the new driver in place by running the following in terminal.
sudo mv ~/Download/AppleUSBAudio.kext /System/Library/Extensions/AppleUSBAudio.kext
9) Load the new driver by running the following in terminal.
sudo kextload /System/Library/Extensions/AppleUSBAudio.kext
10) Confirm the new driver is loaded by running the following in terminal.
kextstat | grep AppleUSBAudio
The output should look like the folliowing (the 2.5.8b13 is the important bit, some of the other numbers might be slightly different):
cfb@snarfblat:~/> kextstat | grep AppleUSBAudio
141 0 0x96c6f000 0x28000 0x27000 com.apple.driver.AppleUSBAudio (2.5.8b13) <95 94 30 14 8 7 5 4 3 1>
At this point you should be good to go. The only issue with this "fix" is that any time there is an update from Apple there is a chance that the driver will get replaced with a newer one. After each update you should run the command from step 10 again to confirm that you have version 2.5.8.b13. If it gets updated, repeat the above process.
NOTE: Jaycyn I have tried to post this to your WoW forum post of the same issue (http://forums.worldofwarcraft.com/thread.html?topicId=22048900603&postId=2204747 77020&sid=1#18) as that is how I found this thread and the solutions but there is something messed up with my forum account preventing me from posting to the WoW forums.

Make a teenage voice sound older

I am recording voices in a rural Moroccan dialect to dub onto a documenatry that was produced in English in order for illerate women here to be able to understand the video (it is about women's rights). There are only teenage girls who can read the script but some of the documentary voices are from older women. So what specific filters do you suggest to make a young female voice sound older. I have tried lowering the pitch a bit which works somewhat for boys' voices, but it does not seem as effective for girls'. Any ideas. I am not trying to win an Oscar with this effort, but I don't want the viewer to be distracted by a young voice dubbed over a middle-age woman.

There are several ways to modify pitch. The plugin version is probably going to be the least effective in this situation. If you haven't tried it, using the destructive audio editor (Sample Editor -> Factory -> Time and Pitch Machine) might provide better results — but be sure to save a copy of your unmodified audio, in case you need to undo.
That said, it might be more distracting for the listener to hear a voice that has obviously been modified. A message is a message, no? If the age/sound is a serious concern, it might be worthwhile to cast older women for the voiceover. Or ... why not have the young woman read and translate the script, then have the older woman ADR/record it line-by-line?

Robotic voice sound?

Similar Messages

Maybe you are looking for