ROCANCEL field in R3 extraction program can't catch the LOEKZ (deletion ind

Why the ROCANCEL field in R3 extraction program can't catch the LOEKZ (deletion indicator) value in EKPO for some item (not all item) deletions in a purchasing doc?
We deleted some purchasing document items on R3, e.g.,
doc 1
item 1 deleted
item 2
item 3
item 4 deleted
item 5
doc 2
item 1 deleted
item 2 deleted
Run RSA3 on the datasource 2LIS_02_ITM, find the extraction program field ROCANCEL(Indicator: Cancel Data Record) for doc1 are all null for each doc1 item that this field ROCANCEL fails to catch EKPO deletion indicator field LOEKZ value for these two deleted item 1 and item 4 showed in table EKPO with value of 'L' for item 1 and item 4.
However this extraction program field ROCANCEL does catches the correct values for doc2 though. Sounds like if all the doc items get deleted then ROCANCEL shows correct value 'R', if only deleting some items of a doc, then ROCANCEL doesn't indicate the deletion!
Any idea? We have searched OSS Notes, but find something which are only for BW other than for R3. The problem starts at R3 extraction program!
Thanks
Message was edited by: Kevin Smith

hi AHP,
There is sth wrong with the website that I can't see the Reply button next to your post.
I check the System Status on our R3, it lists quite a few below:
Software Comp. Release     Level
SAP_BASIS      620         0051
SAP_ABA        620         0051
SAP_APPL       470         0024
SAP_HR         470         0046
EA-IPPE        110         0019
PI             2003_1_470 0009
PI_BASIS       2003_1_620 0007
EA-APPL        110         0020
BTW, I checked the OSS Note 886716, find the 4th tab called "Correction Instructions" contains the following lines below. Which line should we use in our system?
Correction Instruction Valid from Valid to Installation Soft. Component ID
Ref. Correction Modification Status Last Changed on
0000419802 600 600 0120031469 SAP_APPL 1
P7DK006929   Released 07.10.2005   07:43:39
0000420067 500 500 0120031469 SAP_APPL 1
P6DK060509   Released 09.10.2005   22:50:11
0000420068 470 470 0120031469 SAP_APPL 1
P6BK206659   Released 09.10.2005   23:02:38
0000420253 46C 46C 0120031469 SAP_APPL 1
P9CK458509   Released 10.10.2005   00:33:01
Download
Thanks
Message was edited by: Kevin Smith
hi AHP,
I run se38 to check the form XMCEKPO_ERGAENZEN_LIS_NEW, but find it doesn't exist at all in our R3 system!
Thanks

Similar Messages

While Installing this error is coming This Program can not display the pag

When I Try to Install SAP B1 8.8 on Win server 2008.
I am receiving this message.
This Program can not display the page
The website is encountering Problem
There might be a typing error in the address
At the time of Installation which site we need to access.
My Internet is working.
Still i am facing this Problem please suggest me what should I do.

HI Ram ,
Internet is not required while Installation .
Go through :
Re: SAP Business Installation
Thanks
Ashish

Layout - This Program can not display the webpage

Hi Experts,
I am trying to create adobe forms in Webdynpro ABAP, for that I created a Webdynpro component and then view in it and created the required attributes and nodes and the pdfsource as xstring type.
When I go to Layout tab it showing "This Program can not display the webpage" and in route element container I created an element and gave as of Interactive forms but the system is not creating any interface nor going into adobe live cycle designer.
Is it the problem with the Live Cycle Designer or what exactly I have to do now.
Please help me out.
Thanks,
Praveen

Hi.,
This seems that u didnt maintained host entries.,
Click Run -> enter drivers -> goto etc folder -> double click on hosts file -> open with note pad.
there u need to enter the host entries., like .. 192.....<server_address> <tab> <domain> <tab> <host>
ask ur basis team., they will configure that..,
hope this helps u.,
reply if u need some more clarifications.,
Thanks & Regards
Kiran

Why can not catch the standard BACK event in ALV's USER_COMMAND event,

Hi expert, why i can not catch the standard BACK event in ALV's USER_COMMAND event,
Code:
DATA G_CON_UC_FORM   TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      I_CALLBACK_PROGRAM      = SY-REPID
      I_CALLBACK_TOP_OF_PAGE = G_CON_FORM
      I_CALLBACK_USER_COMMAND = G_CON_UC_FORM
      IT_FIELDCAT             = G_TAB_FIELDCAT
      IT_SORT                 = G_TAB_SORT_INF
      I_SAVE                  = G_CON_U
*<<<Liang
    IT_EVENTS               = G_TAB_ALV_EVENTS
*<<<Liang
    TABLES
      T_OUTTAB                = G_TAB_OUTPUT_DATA
    EXCEPTIONS
      PROGRAM_ERROR           = 1
      OTHERS                  = 2.
*&      Form F_USER_COMMAND
      ALV USER COMMAND processing
FORM F_USER_COMMAND .
IF SY-UCOMM = '&FO3'.
    LEAVE TO SCREEN 0.
ENDIF.
ENDFORM.                    " F_USER_COMMAND
When I set breakpoint on this subrouting ,and try to click stardard BACK or CANCEL button, the callback form do not run, but if double click one of line of alv report, the callback form works well,
so why??

hi
good
check this report and change your code accordingly.
THESE LINES ARE FOR THE MAIN PROGRAM ***
SAP V40B ***
REPORT Z_PICK_LIST .
TABLES: RESB.
SELECTION-SCREEN BEGIN OF BLOCK BL1 WITH FRAME TITLE TEXT-BL1.
SELECT-OPTIONS: S_WERKS FOR RESB-WERKS," Plant
                S_AUFNR FOR RESB-AUFNR," Order number
                S_BDTER FOR RESB-BDTER." Req. date
SELECTION-SCREEN END OF BLOCK BL1.
PARAMETERS: P_VARI LIKE DISVARIANT-VARIANT DEFAULT '/STANDARD'.
DATA: BEGIN OF OUT OCCURS 10,
        AUFNR LIKE RESB-AUFNR,         " Order number
        MATNR LIKE RESB-MATNR,         " Material
        BDMNG LIKE RESB-BDMNG,         " Requirements in UM
        MEINS LIKE RESB-MEINS,         " Unit of Measure (UM)
        ERFMG LIKE RESB-ERFMG,         " Requirements in UE
        ERFME LIKE RESB-ERFME,         " Unit of Entry (UE)
        MAKTX LIKE MAKT-MAKTX,         " Mat. description
      END OF OUT.
INCLUDE Z_ALV_VARIABLES.
INITIALIZATION.
REPNAME = SY-REPID.
PERFORM INITIALIZE_FIELDCAT USING FIELDTAB[].
PERFORM BUILD_EVENTTAB USING EVENTS[].
PERFORM BUILD_COMMENT USING HEADING[].
PERFORM INITIALIZE_VARIANT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_VARI.
PERFORM F4_FOR_VARIANT.
AT SELECTION-SCREEN.
PERFORM PAI_OF_SELECTION_SCREEN.
START-OF-SELECTION.
PERFORM GET_ORDERS.
PERFORM GET_MATERIAL_DESCRIPTION.
END-OF-SELECTION.
PERFORM BUILD_LAYOUT USING LAYOUT.
PERFORM BUILD_PRINT USING PRINTS.
PERFORM WRITE_USING_ALV.
      FORM INITIALIZE_FIELDCAT                               *
--> P_TAB                                                         *
FORM INITIALIZE_FIELDCAT USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form GET_ORDERS
      text
FORM GET_ORDERS.
SELECT AUFNR MATNR BDMNG MEINS ERFMG ERFME
         FROM RESB
         APPENDING TABLE OUT
         WHERE XLOEK EQ SPACE          " deletion indicator
         AND   XWAOK EQ 'X'            " goods movement indicator
         AND   WERKS IN S_WERKS        " plant
         AND   BDTER IN S_BDTER        " req. date
         AND   AUFNR IN S_AUFNR.       " pr. order
ENDFORM.                               " GET_ORDERS
*&      Form GET_MATERIAL_DESCRIPTION
      text
FORM GET_MATERIAL_DESCRIPTION.
SORT OUT BY MATNR.
LOOP AT OUT.
    SELECT SINGLE MAKTX
           INTO OUT-MAKTX
           FROM MAKT
           WHERE MATNR EQ OUT-MATNR
           AND   SPRAS EQ 'EN'.
    MODIFY OUT.
ENDLOOP.
SORT OUT BY AUFNR MATNR.
ENDFORM.                               " GET_MATERIAL_DESCRIPTION
      FORM TOP_OF_PAGE                                              *
FORM TOP_OF_PAGE.
DATA: L_POS TYPE P.
first line
WRITE:/ TEXT-001.                    " Plant:
IF S_WERKS-HIGH NE SPACE.
    WRITE: S_WERKS-LOW, TEXT-TO1, S_WERKS-HIGH.
ELSEIF S_WERKS-LOW NE SPACE.
    LOOP AT S_WERKS.
      WRITE: S_WERKS-LOW.
    ENDLOOP.
ELSEIF S_WERKS-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = ( SY-LINSZ DIV 2 ) - ( STRLEN( TEXT-TIT ) DIV 2 ).
POSITION L_POS. WRITE: TEXT-TIT.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-011, SY-UNAME RIGHT-JUSTIFIED. " User:
second line
WRITE:/ TEXT-002.                    " Order:
IF S_AUFNR-HIGH NE SPACE.
    WRITE: S_AUFNR-LOW, TEXT-TO1, S_AUFNR-HIGH.
ELSEIF S_AUFNR-LOW NE SPACE.
    LOOP AT S_AUFNR.
      WRITE: S_AUFNR-LOW.
    ENDLOOP.
ELSEIF S_AUFNR-LOW EQ SPACE.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-012,SY-DATUM.      " Date:
third line
WRITE:/ TEXT-003.                    " Req. Date:
IF S_BDTER-HIGH(1) NE '0'.
    WRITE: S_BDTER-LOW, TEXT-TO1, S_BDTER-HIGH.
ELSEIF S_BDTER-LOW(1) NE '0'.
    LOOP AT S_BDTER.
      WRITE: S_BDTER-LOW.
    ENDLOOP.
ELSEIF S_BDTER-LOW(1) EQ '0'.
    WRITE: TEXT-ALL.
ENDIF.
L_POS = SY-LINSZ - 20.
POSITION L_POS. WRITE: TEXT-013, SY-PAGNO.   " Page:
ENDFORM.                               " TOP_OF_PAGE
      FORM END_OF_LIST                                              *
FORM END_OF_LIST.
DATA: L_POS TYPE P.
ULINE.
WRITE:/ '|', TEXT-021.      " Delivered by:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-031.            " Received by:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
WRITE:/ '|', TEXT-012.      " Date:
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|', TEXT-012.            " Date:
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
WRITE:/ '|'.
L_POS = SY-LINSZ DIV 2.
POSITION L_POS. WRITE: '|'.
L_POS = SY-LINSZ.
POSITION L_POS. WRITE: '|'.
ULINE.
ENDFORM.                               " END_OF_LIST
*&      Form WRITE_USING_ALV
      text
FORM WRITE_USING_ALV.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME     = REPNAME
            I_INTERNAL_TABNAME = 'OUT'
            I_INCLNAME         = REPNAME
       CHANGING
            CT_FIELDCAT        = FIELDTAB.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_FIELDCATALOG_MERGE'.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = REPNAME
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
            I_STRUCTURE_NAME         = 'OUT'
            IS_LAYOUT                = LAYOUT
            IT_FIELDCAT              = FIELDTAB
            I_DEFAULT                = 'A'
            I_SAVE                   = G_SAVE
            IS_VARIANT               = G_VARIANT
            IT_EVENTS                = EVENTS[]
            IS_PRINT                 = PRINTS
       TABLES
            T_OUTTAB                 = OUT.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC, 'REUSE_ALV_LIST_DISPLAY'.
ENDIF.
ENDFORM.                               " WRITE_USING_ALV
THESE LINES ARE FOR THE INCLUDE ***
***INCLUDE Z_ALV_VARIABLES .
TYPE-POOLS: SLIS.
DATA: FIELDTAB TYPE SLIS_T_FIELDCAT_ALV,
      HEADING TYPE SLIS_T_LISTHEADER,
      LAYOUT   TYPE SLIS_LAYOUT_ALV,
      EVENTS   TYPE SLIS_T_EVENT,
      REPNAME LIKE SY-REPID,
      F2CODE   LIKE SY-UCOMM VALUE '&ETA',
      PRINTS   TYPE SLIS_PRINT_ALV,
      TITLE(40) TYPE C,
      G_SAVE(1) TYPE C,
      G_EXIT(1) TYPE C,
      G_VARIANT LIKE DISVARIANT,
      GX_VARIANT LIKE DISVARIANT.
CONSTANTS: FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
           FORMNAME_END_OF_PAGE TYPE SLIS_FORMNAME VALUE 'END_OF_PAGE',
           FORMNAME_END_OF_LIST TYPE SLIS_FORMNAME VALUE 'END_OF_LIST',
           FORMNAME_BEFORE_LINE TYPE SLIS_FORMNAME VALUE 'BEFORE_LINE',
           FORMNAME_AFTER_LINE TYPE SLIS_FORMNAME VALUE 'AFTER_LINE'.
      FORM MAIN_STATEMENTS                                          *
THIS IS THE CODE THAT MUST BE INSERTED IN THE MAIN PROGRAM
FORM MAIN_STATEMENTS.
Declare the parameter P_VARI wherever you want it. If you don't
want it, hide it with NO-DISPLAY, but it must exist.
parameters: p_vari like disvariant-variant. " ALV Variant
You have to add the following line after the data and parameter
declaration:
include z_alv_variables.
Then, after the data/parameter declaration, add these lines:
*initialization.
repname = sy-repid.
perform initialize_fieldcat using fieldtab[].
perform build_eventtab using events[].
perform build_comment using heading[].
perform initialize_variant.
If you are using the variable P_VARI (ALV Variant), also add this:
*at selection-screen on value-request for p_vari.
perform f4_for_variant.
*at selection-screen.
perform pai_of_selection_screen.
After the "END-OF-SELECTION" statement, add these lines:
perform build_layout using layout.
perform build_print using prints.
perform write_using_alv.
You also have to create the following forms: (you can find samples
in this program)
INITIALIZE_FIELDCAT
USER_COMMAND     (only if you are creating a STATUS)
WRITE_USING_ALV
ENDFORM.
*&      Form INITIALIZE_FIELDCAT_SAMPLE
      THIS IS A SAMPLE, DO NOT USE THIS FORM IN YOUR PROGRAM
     -->P_FIELDTAB[] text                                           *
FORM INITIALIZE_FIELDCAT_SAMPLE USING P_TAB TYPE SLIS_T_FIELDCAT_ALV.
DATA: CAT TYPE SLIS_FIELDCAT_ALV.
CLEAR CAT.                           " Always clear before use
CAT-TABNAME = 'I'.                   " Your internal table
CAT-REF_TABNAME = 'ZCUSTMAS'. " The data dictionary reference table
CAT-FIELDNAME = 'KUNNR'.       " Name of your field in the itable.
CAT-COL_POS   = 1.                   " Output position
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'NAME1'.             " Next field
CAT-COL_POS   = 2.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'STRAS'.             " and the next
CAT-COL_POS   = 3.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'LOEVM'.
CAT-SELTEXT_S = 'Del'.         " You can always override the descrip-
CAT-SELTEXT_M = 'Delivery'.          " tion (short, medium, large)
CAT-SELTEXT_L = 'Delivery Num'.
CAT-COL_POS   = 4.
APPEND CAT TO P_TAB.
CAT-FIELDNAME = 'FKIMG'.
CAT-DO_SUM    = 'X'.                 " You want totals calculated.
CAT-NO_OUT    = 'X'.                 " and hidden.
APPEND CAT TO P_TAB.
ENDFORM.                               " INITIALIZE_FIELDCAT
*&      Form BUILD_EVENTTAB
      THIS IS THE SAME FOR ALL THE PROGRAMS
     -->P_EVENTS[] text                                             *
FORM BUILD_EVENTTAB USING P_EVENTS TYPE SLIS_T_EVENT.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
            I_LIST_TYPE = 0
       IMPORTING
            ET_EVENTS   = P_EVENTS.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_LIST
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_LIST TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_BEFORE_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_BEFORE_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_AFTER_LINE_OUTPUT
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_AFTER_LINE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
CLEAR LS_EVENT.
READ TABLE P_EVENTS WITH KEY NAME = SLIS_EV_END_OF_PAGE
                           INTO LS_EVENT.
IF SY-SUBRC = 0.
    MOVE FORMNAME_END_OF_PAGE TO LS_EVENT-FORM.
    APPEND LS_EVENT TO P_EVENTS.
ENDIF.
ENDFORM.                               " BUILD_EVENTTAB
*&      Form BUILD_COMMENT
NOT REALLY NEEDED, BUT I'LL LEAVE IT THERE, JUST IN CASE...
     -->P_HEADING[] text                                            *
FORM BUILD_COMMENT USING P_HEADING TYPE SLIS_T_LISTHEADER.
DATA: HLINE TYPE SLIS_LISTHEADER,
        TEXT(60) TYPE C,
        SEP(20) TYPE C.
CLEAR: HLINE, TEXT.
HLINE-TYP = 'H'.
write: text-101 to text+23.
HLINE-INFO = TEXT.
APPEND HLINE TO P_HEADING.
ENDFORM.                               " BUILD_COMMENT
*&      Form INITIALIZE_VARIANT
VERY IMPORTANT WHEN YOU USE VARIANTS!!!
FORM INITIALIZE_VARIANT.
G_SAVE = 'A'.
CLEAR G_VARIANT.
G_VARIANT-REPORT = REPNAME.
GX_VARIANT = G_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            I_SAVE     = G_SAVE
       CHANGING
            CS_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 0.
    P_VARI = GX_VARIANT-VARIANT.
ENDIF.
ENDFORM.                               " INITIALIZE_VARIANT
*&      Form PAI_OF_SELECTION_SCREEN
ALSO FOR VARIANTS
FORM PAI_OF_SELECTION_SCREEN.
IF NOT P_VARI IS INITIAL.
    MOVE G_VARIANT TO GX_VARIANT.
    MOVE P_VARI TO GX_VARIANT-VARIANT.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              I_SAVE     = G_SAVE
         CHANGING
              CS_VARIANT = GX_VARIANT
         EXCEPTIONS
              WRONG_INPUT   = 1
              NOT_FOUND     = 2
              PROGRAM_ERROR = 3.
    IF SY-SUBRC EQ 0.
      G_VARIANT = GX_VARIANT.
    ELSE.
      PERFORM INITIALIZE_VARIANT.
    ENDIF.
ELSE.
    PERFORM INITIALIZE_VARIANT.
ENDIF.
ENDFORM.                               " PAI_OF_SELECTION_SCREEN
*&      Form F4_FOR_VARIANT
      text
FORM F4_FOR_VARIANT.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            IS_VARIANT = G_VARIANT
            I_SAVE     = G_SAVE
       IMPORTING
            E_EXIT     = G_EXIT
            ES_VARIANT = GX_VARIANT
       EXCEPTIONS
            NOT_FOUND = 2.
IF SY-SUBRC = 2.
    MESSAGE ID SY-MSGID TYPE 'S'      NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
    IF G_EXIT = SPACE.
      P_VARI = GX_VARIANT-VARIANT.
    ENDIF.
ENDIF.
ENDFORM.                               " F4_FOR_VARIANT
*&      Form BUILD_LAYOUT
STANDARD LAYOUT
     -->P_LAYOUT text                                               *
FORM BUILD_LAYOUT USING P_LAYOUT TYPE SLIS_LAYOUT_ALV.
P_LAYOUT-F2CODE       = F2CODE.
P_LAYOUT-ZEBRA        = 'X'.
p_layout-detail_popup = 'X'.
P_LAYOUT-TOTALS_TEXT = SPACE.
P_LAYOUT-SUBTOTALS_TEXT = SPACE.
ENDFORM.                               " BUILD_LAYOUT
      FORM BUILD_PRINT                                              *
STANDARD PRINT OPTIONS                                             *
--> P_PRINT                                                       *
FORM BUILD_PRINT USING P_PRINT TYPE SLIS_PRINT_ALV.
P_PRINT-NO_PRINT_LISTINFOS = 'X'.
P_PRINT-NO_PRINT_SELINFOS = ' '.
ENDFORM.                               " BUILD_PRINT
      FORM PF_STATUS_SET                                            *
NAME YOUR STATUS ALV. IF YOU NEED IT..                             *
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'ALV' EXCLUDING EXTAB.
ENDFORM.                               " PF_STATUS_SET
      FORM USER_COMMAND_SAMPLE                                      *
--> UCOMM                                                         *
--> SELFIELD                                                      *
FORM USER_COMMAND_SAMPLE USING UCOMM    LIKE SY-UCOMM
                           SELFIELD TYPE SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'MSXL'.                       " Export to Excel
     perform set_excel_export.
      CLEAR UCOMM.
    WHEN 'MM03'.
     set parameter id 'MAT' field selfield-value.
     call transaction 'MM03' and skip first screen.
      CLEAR UCOMM.
    WHEN 'BGR1'.
     perform fill_available.
     perform graph_available.
      CLEAR UCOMM.
    WHEN 'DOCU'.
     call function 'Z_HELP' exporting repname = repname.
ENDCASE.
ENDFORM.                               " USER_COMMAND
*&      Form WRITE_USING_ALV_SAMPLE
*THIS IS A SAMPLE AND MUST BE WRITTEN DIRECTLY IN THE MAIN PROGRAM
FORM WRITE_USING_ALV_SAMPLE.
YOU CAN MERGE WITH A DATA DICTIONARY TABLE USING THIS:
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
      exporting
           i_program_name     = repname
           i_internal_tabname = 'I'
           i_inclname         = repname
      changing
           ct_fieldcat        = fieldtab.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_FIELDCATALOG_MERGE'.
endif.
OR JUST DISPLAY IT USING THIS:
call function 'REUSE_ALV_LIST_DISPLAY'
      exporting
           i_callback_program       = repname
           i_callback_pf_status_set = 'PF_STATUS_SET'
           i_callback_user_command = 'USER_COMMAND'
           i_structure_name         = 'I'
           is_layout                = layout
           it_fieldcat              = fieldtab
           i_default                = 'A'
           i_save                   = g_save
           is_variant               = g_variant
           it_events                = events[]
           is_print                 = prints
      tables
           t_outtab                 = i.
if sy-subrc <> 0.
   write: 'SY-SUBRC: ', sy-subrc, 'REUSE_ALV_LIST_DISPLAY'.
endif.
ENDFORM.                               " WRITE_USING_ALV
thanks
mrutyun^

Can I catch the error instead of the DUMP GETWA_NOT_ASSIGNED ???

Hi:
I have the following code:
FIELD-SYMBOLS: . is executed i got a dump GETWA_NOT_ASSIGNED.
Can I catch the error instead of the dump ?
Thank you
Silvia

see the following example to avoid DUMP
PARAMETERS: p_file LIKE rlgrap-filename .
DATA: v_file TYPE string.
DATA: BEGIN OF itab OCCURS 0,
      name(23) TYPE c,
      END OF itab.
DATA: errormessage TYPE char50.
v_file = p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename            = v_file
    filetype            = 'ASC'
    has_field_separator = ' '
TABLES
    data_tab            = itab.
RECEIVE RESULTS FROM FUNCTION 'GUI_UPLOAD'
EXCEPTIONS
   file_open_error               = 1
   file_read_error               = 2
   no_batch                      = 3
   gui_refuse_filetransfer       = 4
   invalid_type                  = 5
   no_authority                  = 6
   unknown_error                 = 7
   bad_data_format               = 8
   header_not_allowed            = 9
   separator_not_allowed         = 10
   header_too_long               = 11
   unknown_dp_error              = 12
   access_denied                 = 13
   dp_out_of_memory              = 14
   disk_full                     = 15
   dp_timeout                    = 16
   OTHERS                        = 17 .
break developer.
CASE sy-subrc.
WHEN 0.
    errormessage     = 'Data Loaded'.
WHEN 1.
    errormessage     = 'FILE_OPEN_ERROR'.
WHEN 2.
    errormessage     = 'FILE_READ_ERROR'.
WHEN 3.
    errormessage     = 'NO_BATCH'.
WHEN 4.
    errormessage     = 'GUI_REFUSE_FILETRANSFER'.
WHEN 5.
    errormessage     = 'INVALID_TYPE'.
WHEN 6.
    errormessage     = 'NO_AUTHORITY'.
WHEN 7.
    errormessage     = 'UNKNOWN_ERROR'.
WHEN 8.
    errormessage     = 'BAD_DATA_FORMAT'.
WHEN 9.
    errormessage     = 'HEADER_NOT_ALLOWED'.
WHEN 10.
    errormessage     = 'SEPARATOR_NOT_ALLOWED'.
WHEN 11.
    errormessage     = 'HEADER_TOO_LONG'.
WHEN 12.
    errormessage     = 'UNKNOWN_DP_ERROR'.
WHEN 13.
    errormessage     = 'ACCESS_DENIED'.
WHEN 14.
    errormessage     = 'DP_OUT_OF_MEMORY'.
WHEN 15.
    errormessage     = 'DISK_FULL'.
WHEN 16.
    errormessage     = 'DP_TIMEOUT'.
WHEN 17.
    errormessage     = 'OTHERS'.
ENDCASE.
MESSAGE e000(00) WITH errormessage .

Can't catch the exception when transaction rollback ,BPEL/SOA 11G,updated!

Hi Guys ,
I have two insert/update invoke actions through dbadpter in my BPEL process .
When I set the GetActiveUnitOfWork property of those two db adapters to true ,it successfully makes the global transaction work . any of them failed will cause the other rollback.
But the CatchAll brunch can't catch the exception in that case,
I can only see exception message from the system output :
02/11/2009 11:36:46 AM oracle.toplink.transaction.AbstractSynchronizationListener beforeCompletion
WARNING:
Local Exception Stack:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.1.0) (Build 090527)): oracle.toplink.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (Table1_PK) violated
from BPEL console , you can't even see the error , the process finished with no exception.
When I set GetActiveUnitOfWork to false, CatchAll brunch is able to catch the exception , but global rollback is not working .
I try all the other method like set the transaction property of BPEL to required , using checkpoint() in java embedding . it looks like only way is set GetActiveUnitOfWork to true, but can't catch exception.
Here are some updated:
Here is my process
Main Sequence
Invoke (dbadapter update)
Invoke (dbadapter insert)
Global CatchAll
Invoke(jmsAdapter sendjms)
if I disable the CatchAll branch , when insert failed , the insert will rollback as well, even GetActiveUnitOfWork set to false.
enable CatchAll branch , even doing nothing in this branch , the update won't rollback when insert failed. it looks like when catch the exception , bpel seems not rollback , I try to add throw rollback in catchall branch, no any effect.
any clue ?
Kevin
Edited by: kyi on Nov 5, 2009 10:10 AM

Hi All,
We are also facing a similar kind of issue.
We have a simple BPEL which will makes use of JAva embedding to call an end point to check its availibility.
The Java code for cheking the enpoint connectivity is below
try{
boolean endpointAvailable = false;
long start = System.currentTimeMillis();
int endpointTestURL_port = 8445 ;
int endpointTestURL_timeout = 500;
String endpointTestURL_queryString = "" ;
String endpointTestURL_protocol = (String)getVariableData ("endpointProtocol");
addAuditTrailEntry("endpointTestURL_protocol: " + endpointTestURL_protocol);
String endpointTestURL_host = (String)getVariableData ("endpointHost");
addAuditTrailEntry("endpointTestURL_hostl: " + endpointTestURL_host);
URL endpoint = new URL(endpointTestURL_protocol, endpointTestURL_host, 8445, endpointTestURL_queryString);
addAuditTrailEntry("endpoint object is created" );
String endpointTestURL = endpoint.toExternalForm();
addAuditTrailEntry("Checking availability of endpoint at URL: " + endpointTestURL);
// Configure connection
HttpURLConnection connection = (HttpURLConnection)endpoint.openConnection();
connection.setRequestMethod("GET");
addAuditTrailEntry("The Method is Get");
connection.setConnectTimeout(5000);
addAuditTrailEntry("Timeout is 500 ms");
// Open connection
connection.connect();
addAuditTrailEntry("Open Connection");
String responseMessage = connection.getResponseMessage();
addAuditTrailEntry("Recieved availability response from endpoint as: " + responseMessage);
// Close connection
connection.disconnect();
endpointAvailable = true;
if (endpointAvailable)
setVariableData("crmIsAvailable", "true");
else
setVariableData("crmIsAvailable", "false");
catch(Exception e)
System.out.println ("Error in checking endpoint availability " + e) ;
addAuditTrailEntry("error message is : " +e);
When we run the above as a seperate java program it runs fine i.e goes to the catch block and catches the exception.
But when we run it within the java embedding in BPEL(11G) it gives us the follwoing error.
The reason was The execution of this instance "490001" for process "default/GMDSSalesLeadsBackMediationInterface!1.0*soa_e1a6362f-c148-417c-819c-9327017ebfa4" is supposed to be in an active jta transaction, the current transaction status is "ROLLEDBACK" .
Consult the system administrator regarding this error.
     at com.oracle.bpel.client.util.TransactionUtils.throwExceptionIfTxnNotActive(TransactionUtils.java:119)
     at com.collaxa.cube.engine.CubeEngine.store(CubeEngine.java:4055)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4372)
     at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:4281)
     at com.collaxa.cube.engine.CubeEngine._createAndInvoke(CubeEngine.java:713)
     at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:545)
     at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:654)
     at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:355)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at com.bea.core.repackaged.springframework.jee.intercept.MethodInvocationInvocationContext.proceed(MethodInvocationInvocationContext.java:104)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor$1.run(JpsAbsInterceptor.java:88)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:414)
     at oracle.security.jps.wls.JpsWeblogicEjbInterceptor.runJaasMode(JpsWeblogicEjbInterceptor.java:61)
     at oracle.security.jps.ee.ejb.JpsAbsInterceptor.intercept(JpsAbsInterceptor.java:106)
     at oracle.security.jps.ee.ejb.JpsInterceptor.intercept(JpsInterceptor.java:106)
     at sun.reflect.GeneratedMethodAccessor960.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
     at com.bea.core.repackaged.springframework.jee.intercept.JeeInterceptorInterceptor.invoke(JeeInterceptorInterceptor.java:69)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
     at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
     at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
     at weblogic.ejb.container.injection.EnvironmentInte
we also get
BEA1-108EA2A88DAF381957FF
weblogic.transaction.internal.TimedOutException: Transaction timed out after 301 seconds
BEA1-108EA2A88DAF381957FF
     at weblogic.transaction.internal.ServerTransactionImpl.wakeUp(ServerTransactionImpl.java:1733)
     at weblogic.transaction.internal.ServerTransactionManagerImpl.processTimedOutTransactions(ServerTransactionManagerImpl.java:1578)
     at weblogic.transaction.internal.TransactionManagerImpl.wakeUp(TransactionManagerImpl.java:1900)
     at weblogic.transaction.internal.ServerTransactionManagerImpl.wakeUp(ServerTransactionManagerImpl.java:1488)
     at weblogic.transaction.internal.WLSTimer.timerExpired(WLSTimer.java:35)
     at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
javax.ejb.EJBException: Transaction Rolledback.: weblogic.transaction.internal.TimedOutException: Transaction timed out after 301 seconds
BEA1-108EA2A88DAF381957FF
We tried the following
Increase the JTA timeout in the EM console to a larger value like 600 secs.
The BPEL instance is not getting created.
Any help would be appreciated
Thanks
Lalit

How can i catch the jsp checking event ?

As we know, there are three parameters which is about checking in the weblogic.xml, pageCheckSeconds,*servlet-reload-check-secs*,*resource-reload-check-secs*, but how can i catch the checking event when the webapp is active.
The fellowing is my simple test, i deployed a webapp on a weblogic server instance, and it was actived. I wrote a simple bash shell to try to catch the event, but fail. i througnt it may be dependent on the webapp's stage mode. but i change the mode, and try again, it was fail too.
[weblogic@tdy218 ~]$ ls
getLastAccessTime.sh webapps
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
The file's last access time is: 2011-05-22 11:10:21.000000000 +0800
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
The file's last access time is: 2011-05-22 11:11:37.000000000 +0800
[weblogic@tdy218 ~]$ stat
/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp
File: `/bea/wls924/user_projects/domains/base_domain/servers/AdminServer/stage/Test/Test/login.jsp'
Size: 634 Blocks: 8 IO Block: 4096 regular file
Device: 804h/2052d Inode: 583725 Links: 1
Access: (0644/-rw-r--r--) Uid: ( 502/weblogic) Gid: ( 500/ bea)
Access: 2011-05-22 11:11:37.000000000 +0800
Modify: 2010-05-24 14:49:08.000000000 +0800
Change: 2011-05-22 11:10:21.000000000 +0800
The jsp file's last access time didn't changed in the past.
[weblogic@tdy218 ~]$ more getLastAccessTime.sh
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 3
done
weblogic.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE weblogic-web-app PUBLIC "-//BEA Systems, Inc.//DTD Web Application 8.1//EN" "http://www.oracle.com/technology/weblogic/servers/wls810/dtd/weblogic810-web-jar.dtd">
<weblogic-web-app>
<jsp-descriptor>
<jsp-param>
<param-name>pageCheckSeconds</param-name>
<param-value>2</param-value>
</jsp-param>
</jsp-descriptor>
<container-descriptor>
<servlet-reload-check-secs>2</servlet-reload-check-secs>
<resource-reload-check-secs>2</resource-reload-check-secs>
</container-descriptor>
<context-root>/jdbc</context-root>
</weblogic-web-app>
env :
WebLogic 9.2 MP4、Redhat Linux AS 4 Update 8 x86.

I tested on WLS 11g ps2(10.3.3) which is running in Development Mode also, but it was the same as WLS 9.2 MP4.
During the weblogic server running, it don't check the application resources , but it will check the $Domain_Home/autodeploy directory every three seconds in Development Mode , the following is the result.
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh /bea/wls924/user_projects/domains/base_domain/autodeploy
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:43.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:46.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:49.000000000 +0800
The file's last access time is: 2011-05-22 12:01:52.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
The file's last access time is: 2011-05-22 17:26:25.000000000 +0800
Ctrl + ^
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/
insert.jsp login.jsp query.jsp tdy218.sql WEB-INF/
[weblogic@tdy218 ~]$ ./getLastAccessTime.sh ~/webapps/Test/login.jsp
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
The file's last access time is: 2011-05-22 11:44:31.000000000 +0800
Ctrl + ^
I set the frequency to every one seconds this time by using sleep method in my Bash Shell script.
#!/bin/bash
declare -i m=1
declare -i n=100
while [ $m -le $n ]; do
echo "The file's last access time is: $(stat -c %x $1)"
m=m+1
sleep 1
done

My solaris can't catch the internet

I have finished my installation of solaris 10, but I can't browse any web site. The msg said that "The XXX.com can't found, pls try again and check the name". But I am sure that the name of web site and the web site is exited since I can open it with another computer.
So that, I wonder that if the computer hadn't detected the NIC. Therefore, I had tried many method to find the package for the NIC. But I can't find any of it. So, I really don't know what can I do?
Can I do that in another way?
Or the problem that I wondered is not right?
Pls help!!!!

since we can't execute the package file from the floppy disk.......
and any procedure of setting
#ifconfig hme0 plumb(start up the NIC)
#ifconfig hme0 inet 192.168.49.51 netmask 255.255.255.0 (add IP and Subnetmask)
#vi /etc/defaultrouter (add router)
#echo ��myhost�� > /etc/nodename (add host name)
#echo ��domain domain.com�� > /etc/resolv.conf (set the domain name, this step can omit)
#echo ��nameserver 161.64.3.1�� >> /etc/resolv.conf (set the IP of DNS)
#vi /etc/nsswitch.conf (change the DNS enquire method, since the original one is hosts: file �� hosts:file dns)
all of above are what we have done, but we still can't catch the internet....
so what can we do to solve this problem?

How can I catch the exception type c = type i?

How can I catch the exception and display the error message when I assign the u2018ABC123u2019 value to an int data type.
Code is as follow.
REPORT zfsl_sum_functions.
DATA: cin(50),
      cout(50),
      iin TYPE i,
      iout TYPE i,
      etext TYPE string.
cin = '123ABC'.     " how can i catch this
iout = cin.
WRITE: iout.

The CATCH-ENDCATCH statement is obsolete as of release was620. You should use TRY. CATCH. ENDCATCH.
The exception that will be raise is CX_SY_CONVERSION_NO_NUMBER, so you have to catch that exception or a super class of this exception class.
REPORT zfsl_sum_functions.
DATA: cin(50),
cout(50),
iin TYPE i,
iout TYPE i,
etext TYPE string.
DATA: rf_cx_error TYPE REF TO CX_SY_CONVERSION_NO_NUMBER,
        errortxt TYPE string.
TRY.
    cin = '123ABC'. " how can i catch this
    iout = cin.
    WRITE: iout.
CATCH CX_SY_CONVERSION_NO_NUMBER INTO rf_cx_error.
    errortxt = rf_cx_error->get_text( ).
    WRITE errortxt.
ENDTRY.

Hi, when can i get the recently deleted rows

Hi,
Where can I get the recently deleted rows after commiting the transactions.
Thanks in advance.

To query your table e.g. one hour ago:
select * from your_table as of timestamp sysdate - 1/24change 1/24 to a number where you think your data were still in the table.

Is there anyway i can get all the stuff deleted off my phone

is there anyway i can get all the stuff deleted off my phone as its been stolen and will there be anyway ill be able to get all my stuff back if i get a new phone

If you activated "Find my iPhone", you could log into your iCloud account and wipe the phone remotely. If you have a backup of your device on your computer or iCloud, you can restore from that backup if you have your new device.
Apple - iCloud - Find your missing Apple device.

Where used of a table field in BI extraction program

Hi,
How can I find a particular table or table-field is used in any BI extraction program or not? Actually we are doing a modification and change in the structure of a big Z table and custom developments. So I want to analyse and list the programs related to BI extraction also... which are going to effected because of this change. So please let me know... how can I find this. Actually I am a R/3 Logistics functional consultant... no much idea in ABAP & BI...
Thanks in advance.
Regards,
CHS.

Hi,
this sounds like a question for the BW area.
regards
Ingo Hilgefort.

Where used list of a Z field in BI extraction programs

Hi,
How can I find a particular table or table-field is used in any BI extraction program or not? Actually we are doing a modification and change in the structure of a big Z table and custom developments. So I want to analyse and list the programs related to BI extraction also... which are going to effected because of this change. So please let me know... how can I find this. Actually I am a R/3 Logistics functional consultant... no much idea in BI...
Thanks in advance.
Regards,
CHS.

Hi,
this sounds like a question for the BW area.
regards
Ingo Hilgefort.

My LV program can't find the iak file when the program is loaded from a different PC.

Hello all,
My LV vi with Fieldpoint I/O and it's IAK file are stored on the company network.  If I load and run the LV vi from the PC it was developed on, everything is fine. If I load and run on a different PC (that has an identical install of LV), the LV vi can't find the IAK file (all of the I/O pointers to the file are grayed out.)
Also, if I make an EXE out of the vi on the machine that can find the IAK, it won't find it if it's run from the other machine.
It is not related to whether one machine has different "rights", as they are identical. It's not related to different installs of LV, as they are identical.
I have found that this is related to the network login name/password, and to the machine's network name.  If I login on the second machine and try to run the program, it won't find the IAK. If I point it to the IAK it will run. If I save it and log out, and then login as a different user with the same rights on the second machine, it won't find the IAK again, until I re-point it there when I re-run it. This is true for both the vi and the EXE.
This problem makes deploying the EXE difficult to different machines, as the first time it's run, the EXE has to be pointed to the IAK. Pointing the EXE to the IAK is difficult as these installations have no keyboard or mouse.
Does anyone have any ideas on how to fix this so the LV vi or it's EXE finds the IAK from no matter where it's loaded from?
Thanks,
Mike

Laura,
I figured I'd continue this thread because it's along he same line..
I have two Fieldpoint systems. They are identical, except for one thing...one has an AI-110 in position 7...the other has nothing. Both have the same IP address, etc and I swap the ethernet cable between them when I want to select which one I use. I use a dedicated ethernet card to the FP processor...and it's not the company net.
There are two IAK files...one for the system with the AI-110, one for the system without the AI-110. The two IAKs are in different paths.
Before I had the system and the IAK without the AI-110, I made an EXE of the code that woked with the AI-110, and it worked fine.
But now if I run the EXE after I've used MAX and opened the IAK without the AI-110, the EXE won't read the AI-110! I have to go back into MAX and open the IAK that has the AI-110 in it, close MAX and restart the EXE for the EXE to see the AI-110. (Max is NOT SET to "Download Items on Save")
I looks like the EXE is looking at MAX to get the IAK or a pointer to the IAK.
Did I build my EXE incorrectly? Shouldn't an EXE completely ignore MAX once it's made?
Thanks,
Mike

How can I Catch the program to prevent exit all?

Hi,
I am actually implementing a Ptolemy GUI for my subject. And I am now facing a very serious problem. I build an application to call the Ptolemy application to probe up a plotting graph program. Every time after I call the run Simulation() the program call the plotting from Ptolemy, but when I press close from the plotting, everything close including all applications that are not expected to close.
The problem I think is located here:
PtolemyApplication exec_model = new PtolemyApplication(argument);
So I would like to know how can I catch its exit to avoid closing everything.
Can anyone give me suggestion please?
below are the method I call:
public void runSimulation()
try{
File file = new File("default.xml");
DataOutputStream out =
new DataOutputStream(new FileOutputStream(file));
SimGraphWriter writer = new SimGraphWriter();
boolean checkAllConnected;
checkAllConnected = writer.write(graphpane.getGraphModel(),
graphpane.getGraphView(),currDirector, out);
if(checkAllConnected){
("//d/Ptolemyii/ptII0.4/ptII0.4beta/bin/ptolemy.bat ./default.xml");
               String argument[] = {"default.xml"};
               try {
                    PtolemyApplication exec_model =
new PtolemyApplication(argument);
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
                    this.dispose();
               catch(Exception ex) {
                    System.out.println(ex);
                    ex.printStackTrace();
catch(Exception ex){
          System.out.println(ex);
ex.printStackTrace();
}

Thread is an object that u create just like String /or whatever eg;-
Thread firstThread, secondThread, thirdThread;
once they're declared u can stop, start + run them individually with boolean values (true /false) and therefore control what u want to do when.
Play with the code examples + mess around with it - it's not absolute beginner stuff - but it isn't that tough either

ROCANCEL field in R3 extraction program can't catch the LOEKZ (deletion ind

Similar Messages

Maybe you are looking for