ROCANCEL field is missing in Transfer Rules.

Hi Bw Experts,
i have created the datasource and enabled the delta. I have replicated the datasource.I have created the Custom ODS.When i am creating the transfer rules, ROCANCEL field is not displaying.I couldnt able to map for RECORDMODE Info Object.
Can u pls help on this issue.
Thanks,
Jelina.

Hi,
making a field delta enabled will not make the ROCANCEL filed included in the data source.
Its provided by SAP for the standard extractor to track the cancelled records and changes and there is logic written in the SAP programs to populate it.
If you create a generic data source it will bring the changes based on the date which you have given.
If the record is cancelled or deleted then you should include the indicator from the underlying table which shows the records as deleted and make it part of the data source.
You can then map that too 0RECORMODE.
Thanks
Ajeet

Similar Messages

  • R/3 DataSource field missing in Transfer Rules

    Hello Everyone,
    I am working with R/3 Datasource 0ASSET_AFAB_ATTR. I enhanced the structure by adding a new field 'VYEAR'. After generating the Datasource in R/3, i replicated the datasources on the BW Application Component. But, i cannot see the appended field 'VYEAR'in the Transfer Rules. The field is not hidden and I can see the field getting populated in RSA3 for that datasource. Could someone help.
    Thanks

    Hi Sachin,
    In the InfoSource Maintenance screen expand the node for transfer structur/transfer rules and click on the tab datasource/transfer structure and scroll down to find your field.
    Cheers,
    Sree

  • How to refer field of DataSource in transfer rule for DSO object  in BI 7.0

    hello Gurus,
    I am new to BI 7.
    pls tellme how to refer field of DataSource in transfer rule for DSO object.
    I will assign points to proper answer.
    Praveen.

    hi praveen,
    when u create the transformation for the DSO, it asks for the source. in that you enter your datasource, then you get the datasource fields on one side and the rules in the middle and the DSO objects on the other side. whichever field of DataSource you want to refer in tranformation rule, just connect that field to the rule for the required object of the DSO.
    hope this will help you.
    regards
    vaibhav

  • NO PSA for InfoSource and source system 120 : Maintaing Transfer Rules

    Hello BI Experts ,
    I am working on Generic data source extraction.
    Earlier I mapped all fields infoobjects in Transfer Rules and then loaded data to ODS properly.
    But later on I made few changes in Generic data source view and exits in the R3 and replicated the data source to BI.
    Then Remapped the fields to infoobjects in Transfer Rules.
    Now I can see Transfer Rules Green and all fields are mapped properly.
    But when I activated Transfer Rules I am getting message that ,
    "There is no PSA for InfoSource ZPS_DATA_BB and source system 120 "
    Data source is active in R3.
    Communication Structure and Infosource are Active in BI.
    Regards ,
    Amol K.

    hello Surendra ,
    I did the same thing already.
    I was looking for some otherway.
    Thanks for reply.
    Regards ,
    Amol K.

  • Transfer rules not activated

    Hi Guys,
    This is Venkat, unable to activate Transfer rules.It doesnot Showing any errors while activating the Transfer rules and also in the DISPLAY LOGS.But while trying to transfer the field(0crm_guid)from assignInfoobjct-field by using propose transfer rules spindle to Communication str/Transfer rules it was not allow this field to transfer into the transfer rules.After activating it was showing the message Transferstuctute was activated.
    could u Pl help me .

    Hello Venkat,
    you made a detailed description. I just don't know, which transfer rules you mean. Which transaction code you are using?
    Regards,
    Christian

  • Where are transfer rules created in bi

    I am new to BI and does not know how to create transfer rules ...help me

    Hi,
    Basically the source system is connected to BW thru DataSource. The fields from this DataSource are mapped with the fields in BW thru Transfer Rules.
    The flow is like this..
    Source System (DataSource) --> Infosource (Transfer Structure - Transfer Rule - Communication structure) --> Update Rule --> Data Target
    Now when you create InfoSource in BW, you map a DataSource to it, then in Transfer Rules you create the mapping of fields.
    Hope you are getting the flow.
    Regards,
    Yogesh

  • Two formulas for a single field in Transfer Rules ?

    Hi friends ,
    I am learning BW  3.5 . I have got a problem could you please solve it ...
    My flatfile:           Empno     Empfirstname       Emplastname
                               1000         rajiv                     gandhi
    Expected Result: Empno     Empfirstname       Emplastname
                               1000         RAJIV                RAJIVGANDHI
    I need to concatenate and Convert it into capital letters for the same field (Emplastname)
    Points will be rewarded
    Thanking You

    Hi,
    then just create a routine in the transfer rules.
    routine for first name.
    result = tran_structure-empfirstname.
    translate result to upper case.
    routine for last name.
    concatenate tran_structure-empfirstname tran_structure-emplastname into result.
    translate result to upper case.
    kind regards
    Siggi

  • Missing Transfer Rules in Selection Window for Transport

    Hello,
    Can somebody tell me why certain transfer rules are missing in the object selection list of the transport connection window?  I am using BW 3.5.
    Problem details:
    I want to transport a transfer rule from a DEV box to a QA box.  In the transport connection window, I clicked on "select objects" from under transfer rules in the middle panel.  The object listing that followed showed only objects that start with numbers; no object we defined locally that starts with Z was included. 
    I also noticed that this appears to be a "funny" problem.  One other computer connected to BW shows the correct listing while still another shows a different listing.  Has this got to do with any setting? 
    Please help.
    Wernel

    Hi Wernel,
    Its better to activate ur transfer rules once again. Also this Z*  TRs would be displayed in last row of the Pop up window in the select Objects list.
    or select them by grouping as before dataflow by selecting InfoSoruce.
    Assign points if it helps...
    Regards,
    ARK

  • Transfer Rules missing in Business Content (704 lvl 1) for CMS

    Hi SDN,
    We are currently on BI 7.0, and using Business Content 704 level 1.  When collecting BIC InfoSources for Collateral Management Systems (CMS), we notice that the transfer rules are missing in business content.
    Has anyone encountered this issue?  I have  been referencing notes 1171293, and 1179880
    Thanks,
    Brendon

    hi,
    If there is missing in Business its problem with the business content patch levels.Check out with your basis team.
    Regards,
    Shiva.

  • Content for 0REFX_3 transfer rules missing.

    Hi folks
    We are trying to implement content for 0REFX_C03 cube. But the transfer rules from datasource to infosource 0REFX_3 is missing from business content.
    Inorder to get that we have implemented SAP note
    BW transfer rules missing in delivery
    SAP Note Number: 1246385 
    And we installed  BI_CONT 704 SAPK-70401INBICONT  New support pack for BI content.
    It leads to weird changes in the system like previously available objects in BI content are missing.
    Did any body encountered same problem.

    Hi,
    We are having the same problem - no transfer rules for  0REFX_C03.
    Currently on BI_CONT 735 Level 003.
    Did this problem get resolved?
    Any help greatly appreciated.

  • Technical Content BI Stat`s missing Transfer Rules for 0TCT_CA1

    Hi,
    I installed the new 7.0 technical content and had several glitches. Some are fixed with the new SP16, that we installed.
    We are at BI Cont 7.03, patch 8.
    There is no business content for the Frontend & OLAP Statistics (highly aggregated) 0TCT_CA1 transfer rules - although the cube and communication structure are there - as well as the virtual and multi cube with a lot of queries etc.
    Does anyone have a solution for this?
    Thanks!
    Kathleen

    Hi Kathleen Cooke ,
    I am having similar issue now, can you please let me know if you know the solution for the below problem..
    I am trying to activate the Business Content for BW Statistics, but the datasource and the  Transfer Rules are missing for the 0TCTPRCSVAR_TEXT and also a couple of BW Statistics objects...
    I am on
    BI_CONT 703, level 0005, Support Package SAPKIBIIP5
    SAP_BW 700, level 0012, Support Package SAPKW70012
    Thank You,
    Varun.

  • How to input more than one currency field into the transfer rules?

    hi experts,
    how to input more than one currency as well as unit fields in transfer rules, when i am giving two currency fields in flatfile the same structure could not able to get in transfer rules ( 0currency).
    pl give me the procedure to input more than one currency field.
    thanks & regards
    venkat

    Hi Venkat,
    For example - for amount kf - if you have 0currency as ref object and included in transfer rules and for other kf - create a Zcurr object and try to include...hope it works.
    Thanks,Ramoji.

  • 2LIS_02_SCL Transfer Rules are missing

    Good Morning everyone, I recently activated BI Content (7.05 SP4) in BW (7.02 SP8) for infocube 0PUR_C01, and I can not see the transfer rules for 2LIS_02_SCL, what can I do?

    Juan Orozco wrote:
    I did install BC for 2LIS_02_SCL Transfer Rule (ISMP) again with options "In data flow before and afterwards", I got the right flow of objects from 2LIS_02_SCL ECC datasource to 0PUR_C01 Infocube in BW installed, but the Transfer Rule 2LIS_02_SCL status is Modified(Saved), when I try to activate this Transfer Rule, the system send the message "There is no PSA for InfoSource 2LIS_02_SCL_DA and source system LOGSYS120", what can I do?
    Case A. RS_TRANSTRU_ACTIVATE_ALL
    Case B. Give the tech name of the CLNT120 & generate it. RSDS_DATASOURCE_ACTIVATE_ALL
    Case C. Replicate the datasource after adding/deleting fields in R/3. Right-click on this datasource and select 'replicate metadata' again. Activate using FM in Case A.
    Edited by: Arun Bala G on Feb 16, 2012 9:29 PM

  • RSAU_READ_MASTER_DATA in transfer rules missing results or dump

    Hi Guys,
    Anybody know about if the RSAU_READ_MASTER_DATA work in transfer rules??
    I have a routine for field attribute derivation  from a infobject; putting the trans-structure as I_CHAVL and returning the E_ATTRVAL in result. But don't work and is hiring a dump of CALL_FUNCTION_CONFLICT_TYPE.
    I tested with I_CHAVL equal to a string that is the key of a field in the infobject that I want to read; i haven´t the dump but don't work. The value is blank.
    The code is the next:
    CALL FUNCTION 'RSAU_READ_MASTER_DATA'
        EXPORTING
          I_IOBJNM   = 'KSTATSDSK'
          I_CHAVL    = TRAN_STRUCTURE-KSTATSDSK
      I_T_CHAVL                     =
      I_DATE                        =
      I_FLG_WHOLE_TABLE             =
          I_ATTRNM                    = 'KGRALSTA'
          IMPORTING
      E_STRUCTURE                   =
      E_TABLE                       =
          E_ATTRVAL                   = RESULT
    EXCEPTIONS
          READ_ERROR                    = 1
          NO_SUCH_ATTRIBUTE             = 2
          WRONG_IMPORT_PARAMETERS       = 3
          CHAVL_NOT_FOUND               = 4
          OTHERS                        = 5.
    Please, help me to see the error, if exist, or help me with other method for do this master data attribute read.
    Thank you.

    Hi Jeysi,
    What's ur purpose here ??
    If u're gonna read some data in master data, instead of using function, why don't u directly select to master data table ???
    Usually the table name is /BIC/PX
    X: Master data name.
    /BIC/ => Customized one.
    But if you want to get the information regarding what the table is, you can open directly respective master data info-object, and you go to master data tab.
    In over there, you'll see the box whose label is Master data tab.
    You can use SELECT command in ur corresponding transfer/update rules..
    SELECT *
      FROM ..
      INTO CORRESPONDING FIELD OF TABLE ..
      WHERE ..
    Hopefully it can help you a lot.
    Regards,
    Niel.

  • Transfer Rules (Field position changes)

    In the Transfer Rules how can i change the position of the fields? I want a certain field to be on top and so on.

    Hi,
    Add the fields to the communication structure and then make the transfer rules
    add as per ur convenience and then mapping will be done in the order given by you in the comm structure
    thanks
    puneet

Maybe you are looking for