Rocketfish HD-3035 Won't Connect After 10.7.5 Update

I saw the post about the Rocketfish HD-3035 enclosure not working with Mountain Lion. I just installed the OS 10.7.5 update and now my iMAC won't mount the hard disc in my Rocketfish HD-3035 enclosure.  The HDD is a Seagate.  Anyone else seeing this problem?  For ML I understand Apple pulled the driver from the OS, perhaps they removed the driver in the update to 10.7.5?

Don't know, but my WD external HD won't mount after updating to ML.  It also won't mount on my wifes macbook pro with 10.7.5.  It was working on snow leopard (don't know vesion number)...

Similar Messages

  • My iPhone 5s won't connect after 11.1.5 update?

    A few days ago before I updated my itunes to 11.1.5 my iPhone was able to connect and sync to itunes just fine, but after the update it will not connect? Any feedback will be greatly appreciated. Thanks!

    I have same issue with 5s and iTunes 11.1.5.  Took Windows 7 laptop (same issue with Windos 7 desktop) to Apple store.  Tech uninstalled all components of iTunes and reinstalled under Administrator.  Didn't work.  Fix: 1. Back up iphone to cloud and make sure it completed. 2. Connect iphone to itunes and when it states iTunes can't see contents of iPhone and must be reset to factory settings (again..make sure phone is backed up on cloud.. may have to delete any previous backups to make room for this backup)..select restore and follow directions.  I haven't done this because I think Apple's resolve is bogus...they should put out an update on 11.1.5 to fix the problem or update 7.1 phone version to fix...but Apple tech said even if they did, it probably wouldn't fix.  Problem is, back up is v7.1 and restore may make phone an earlier version...so...if the bug is in the v 7.1 software on phone and once restored to factory settings and request all updates..won't the backup buggy version 7.1 overide the possilble good version of 7.1 restored on phone before backup is loaded back?  And of course there is always the possiblity of ending up with a brick.  Apple...you need to fix on your end..not expect folkes to fix on their end! 

  • Mighty Mouse won't connect after 10.6.7 update

    I updated my Macbook to 10.6.7 this morning and almost straight away I started having intermittent connection problems. First I disconnected the mouse and attempted to re-connect but no dice. Then I deleted the Bluetooth pairing and tried to re-pair only to get the following message:
    "The pairing attempt was unsuccessful. This configuration of Mac OS X and Bluetooth software could be invalid or unsupported."
    The Macbook is less than a year old and the mouse probably only about 6 months. My wireless keyboard doesn't seem to have any issues. I can't believe I'm the only person having this problem!

    I noticed that after 10.6.7 you now have to click down on the mouse before it is recognized after sleep or restart. The mouse simply will not move until you click once, then after about 2 or 3 seconds it is captured by the OS and begins to function. You never had to do this before 10.6.7. I did reset SMC but that does not solve this "delay of getting recognized until you click" issue.

  • Native You Tube app won't connect after 5.0.1 update

    Since updating to 5.0.1, native You Tube app will not connect (error msg: "Cannot connect to You Tube"). Have re-synced, restored, cold rebooted, etc. - to no effect. No Restrictions set in Settings. 3G/WiFi connection make no difference. Can access youtube.com on Safari app. Any other ideas as to what happened to native YT app or what can be done to fix? Thx!

    I am having the same problem. Siri was pretty functional (but not amazing) from the date I first got my iPhone4s in October. But since the latest update she is completely worthless! She cannot do anything, even simple recognition of my Contacts that was previously a breeze. I'll even say "Call John Smith" (for example) and she'll say, "I'm sorry, I cannot find 'John Smith' in your Contacts, but I found these Contacts," and it will then display "John Smith." Are you kidding me?
    It's like having a conversation with my actual girlfriends now. Fail... I've called Apple tech support each of the last 5 nights but each time the wait is HUGE and I hang up after about 10-15 minutes. Seems like a lot of folks are keeping the lines busy - could be because of this issue.

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • HT4623 iPhone 4S won't start after iOS 6.01 update any ideas

    My iPhone 4S won't start after doing the latest update that came out today I believe it was iOS 6.01 or 6.1

    Have already tried that to no success. I have hooked it up to the computer and itunes came up saying phone was in recovery mode and needs to be restored.. So im i the middle of trying that. Thanks for the suggestion..!!

  • Help!  External drive won't connect after Yosemite 10.10.2 update

    I ran the Yosemite 10.10.2 update on my 2013 MacBook Air today, and now I cannot connect to my external Western Digital hard drive.  At times, the drive won't connect or show up at all, but at other times, I get a warning that the computer cannot read or repair it.  Help!  It worked this morning and all of my photos are on there.  I know other people have had similar issues, but I haven't found anything resembling a solution.  (And yes, I have restarted everything, tried different cords, etc.)  Does anyone have any suggestions?
    Thank you!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Ipod mini won't connect after software update

    I was using my ipod mini without problems on my mac powerboook until I downloaded and installed the latest ipod software updater yesterday. Since installing the application and clicking update in the software I can't get my computer to recognise the mini at all no matter what I do. Neither Itunes or the software updater sees my ipod and the ipod itself either says do not disconnect or shows a folder icon with an exclamation mark. Anybody know how to get out of this limbo state it seems to be in?

    One thing you can try (AT YOUR OWN RISK - though I have done this on my own iPod mini using my PB and it has fixed issues similar to those that you are reporting), connect the iPod to your mac and then launch the disk utility app. If you're on a windows machine, this obviously won't help you although there may be a similar procedure. When the disk utility app comes up, if your iPod shows up in the left panel after a moment, highlight it by clicking on the name. If you try to verify it, you'll probably get a report of errors - don't panic - go to the erase pane and erase the drive (I think you can select either format with journaled or unjournaled - they both seem to work for me). MAKE SURE YOU"VE SELECTED THE iPOD DISK BEFORE YOU ERASE THE DRIVE!!!
    After you erase the drive, you'll need to reapply the latest iPod update to restore the iPod OS (if you don't do this you may still be able to load music but it won't play and you'll still see the exclamation point display). After you reapply the update, you will hopefully back to normal. Re load your tunes and enjoy your iPod again!
    Hope this helps.

  • Windows Vista won't connect after security change

    I have an AirPort Extreme base station, to which we connect using an iMac, PowerBook G4 and a Windows Vista laptop. I used to have it set to WEP, but changed it to WPA for the increased security. After the change, my PowerBook and iMac are connecting just fine, but my wife's Vista machine has been nothing but headaches. It will sometimes connect, after a bit of fighting with it, but not reliably or quickly. At the moment, it says that it is connected with local and internet access, but I can't actually access anything on the internet, and diagnosing the problem in Vista reports that a wireless network cannot be found (despite the fact that it simultaneously reports that it is connected to one).
    I know squat about Windows -- I'm a Mac guy. Anybody know how to help me fix this?
    Thanks in advance!

    No answers, but the problem seems to have disappeared. Man, I'm starting to realize how fortunate I am to have been using Macs for the last 23 years. I think Vista is going to be a very good thing for Apple! There's nothing like actually using Vista to make one want to flee screaming and never look back...

  • Wi-fi won't connect after updating to iOS5

    wi-fi wont connect after updating to iOS5

    This is what worked for me:
    1. In wireless settings, select your router and then selet "forget this network."
    2. Turn wireless off.
    3. Hard restart the phone (press power switch and main button simultaneously, hold them until the phone turns off.
    4. Reboot your router, preferably unplug the power cord completely.
    5. After your router is up and running, turn wireless back on, select your network, then enter your password.
    For me, the fix was immediate.  I hope it works for you! 

  • XP computer won't connect after upgrade to 7.5.2

    We have multiple Apple devices which connect seamlessly with Airport Extreme. However, it seems like after the latest firmware update to 7.5.2, our older XP laptop (Toshiba) will not connect. It sees the SSID but will not connect. Our 2007 Dell XP desktop also had this issue, but when I changed the security on AEBS to WPA2 (from WPA/WPA2), the desktop ws able to connect.
    If I unsecure the network, the laptop can connect. It is much older (2003 or so). Funny thing is, it did connect fine using WPA/WPA2 until this past week.That's why I think it was the AEBS firmware update.
    I'm thinking about setting up a guest network for the laptop alone and leaving all other devices on main network. I would rather not have guest network unsecured. Is it possible to keep main network as "n" and use WPA2 and set guest network to "a/g" or wahtever would allow me to use Transitional WEP? I would want to keep the main network as "n". I do not want to downgrade it to "a", "b", or "g" for this one laptop that is used occasionally.
    If my only option is to leave guest network unsecured, will my main network (with banking info etc) still be secure?

    DaveF333, welcome to the discussion area!
    The available security choices for the Guest Network are:
    WPA2 Personal
    WPA/WPA2 Personal
    None
    Security on the Guest network is independent from the Main network, so you could have security set to None on the Guest network and it would not affect the security on the Main network
    If you are in a mood to do some exploring, check out the following:
    Open AirPort Utility - click Manual Setup
    Click the Wireless tab/label just below the Advanced icon
    Hold down the option key on your Mac while you click on the Radio Mode selection box and you will see an expanded list of choices.
    Choose 802.11n only (5 GHz) -- 802.11n/g/b
    Now hold down the option key again and click on the Security setting and you will see a choice to establish WEP Transitional Network. This setting allows WPA devices to connect using the higher security WPA and WEP devices to connect using WEP. You might want to give that a try.
    You can also experiment with a number of different Radio Mode and Security combination settings to find other WEP Transitional Network choices. Just remember to hold down the option key when you click on the selection boxes.
    Pretty neat, huh?

  • My apply tv won't play after it did a update

    My apply tv won't play after it did a update

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.
    (You may already have a micro USB cable if you have a camera or other digital device)

  • I tunes store won't load after 11.1.3 update

    I Tunes store won't load after i updated itunes . Its the 11.1.3 update

    Hello Papamax,
    And welcome to Apple Discussions!
    Have you ran an iTunes *Network Diagnostics Test* yet? If not, use the steps provided in this Apple support document to do so, and then paste your results here.
    http://support.apple.com/kb/HT3204
    Also, try temporarily disabling McAfee and see if that helps. And make sure you have allowed iTunes through its firewall, by using the instructions provided in this article.
    http://www.technipages.com/allow-program-access-through-mcafee-personal-firewall .html
    And lastly, see if any of the troubleshooting steps provided in this Apple support document can assist you.
    [iTunes for Windows: iTunes Store connection troubleshooting|http://support.apple.com/kb/ht1527]
    B-rock

  • My iTouch won't respond after the latest iOS update.

    After I restart and the Apple logo appears, it shows to plug into iTunes.  However, when I do that all I get is the dialog window stating Contacting the iPhone update server.  Then iTunes says it won't connect.  Any other suggestions?

    Thank you but that doesn't work.  The dialog box saying iPhone in recovery mode, keeps popping up.  I am stuck in a loop. Any other suggestions?  I also tried to get it to go to DFU mode holding power and home buttons but that didn't work either. 

  • Itunes not connecting after 6.1.2 update[iphone 5]

    i am not able to connect to itunes after 6.1.2 update for my iphone...i doesn't get connected over wifi sharing or lightning cable..i updated through OTA

    Had some time at lunch to work on this issue. On my Win 7 PC I noticed the Apple USB drive had an ! mark on it in the device manager. I right clicked on it and updated driver software. I picked the automatically search for new driver. Now it works.

Maybe you are looking for