Rocketfish RF-AP307 mini dispalyport to Vga Adapter

Hi. I just bought a rocketfish RF-AP307 mini dispalyport to Vga Adapter for my 11" MacBook Air. I plugged it in and all I can see is a flash of blue then the original galaxy desktop with out any of the things I have on it on my copmuter. When I open the internet or anything, all I see is gray and I cant hear anything.I can see when I switch from one page to another buts its still all gray. Can anybody help me?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

Similar Messages

Mini Displayport to vga adapter on MacBook pro 13" late 2011. No signal on external monitor

Hi
Connecting a Late 2011 MacBook Pro 13" to an external monitor, trough mini Dispalyport to vga adapter, i see "no signal" messagge on external monitor, even if i get it as secondary monitor on Preferences > Monitor of my MacBook it's visible (i can change resolution, position, clone screen, ecc.).
Any suggestion? somebody found the same problem?

Hi
i did what you said and tried with other resolution/refresh rate combinations, also with anoter external monitor (and vga cable) but its still the same: monitor is detected but there's no signal.
Now I will try to chek if the adapter works on other pc and monitor.
Thanks
(anyway it was the firs time i connect this mac to an external monitor)

No video signal using mini dvi to vga adapter.

I just bought a macmini,the last generation. Separately I bought on the apple store a mini dvi to vga adapter because when I bought the macmini I forgot to buy that....once the adapter arrived I tried to turno on the mini,everything seems to be normal,the mini works,the audio signal is normal and after the startup it asks me to choose the language,but the screen says there's no INPUT SIGNAL. I tried another mini dvi to vga adapter,the vga wire works with my pc so I didn't try another one,I tried the reset of the mini,nothing....do I have to try with "miniport to vga" adapter or is there something else I can try?

I got my Mac Mini yesterday and I am having the exact same problem as you are having.
I've tried on two different TV's but it is just not sending a signal. Is it faulty?

Apple Mini DisplayPort to VGA Adapter flickers

I have 2 Samsung SyncMaster 23 in, HD Displays connected to my Mac Mini. The Display connected via the Mini DP to VGA adapter flickers erratically. This started happening after installing the latest upgrade of OSX Mountain Lion. I called Apple support, they gave me a list of steps to try to fix the problem, which I followed to the letter, to no avail. The problem is annoying, to say the least. I tried to find out if there was a firmware update for the adapter, but I am running the latest firmware (1.03).
I would appreciate any help to solve this issue.

Thank you for your message.
1. Both monitors only have VGA input.
2. The other adapter, Mini-DVI to VGA has always worked properly.
3. The Mini DisplayPort to VGA adapter is an Apple original product I bought at an Apple store. I bought 2 adapters.
4. Actually I have 2 Mini DisplayPort to VGA adapters: The one I use with my Mac Mini, and another adapter I use to connect my Mac Book Pro to a Panasonic projector.
5. I have tried using both adapters, and the flickering problem is present using either adapter.
6. I believe the flickering problem is definitely something that needs to be addressed and solved by Apple. The adapter is its product, and should work as advertised, no matter what version of OSX I am running. Please remember that there was no flickering before I upgraded to the latest OSX Mountain Lion.
7. I do not believe buying an adapter from another manufacturer, as you suggest, would solve the problem.
Thank you for your help.

Apple Mini DVI to VGA Adapter

I purchased a Apple Mini DVI to VGA Adapter for my MacBook (early 2008).
When I plug the cable into my MacBook it works fine, I have to drag the browser from my macBook onto my LCD using the curser. But when I do this with iTunes and I want to watch a film or music video there is no sound. Does anyone have any ideas of how to solve this problem or if im using it right.
Please help.

Ah. Okay. Well you need to output the sound from your MacBook to your TV. You need another cable to carry the audio. You can use an 1/8 mini audio to TOSLINK (if your TV supports optical audio input) or 1/8" to RCA audio (those red/white cables).

Mini DVI to VGA Adapter Issues

Hey guys,
My first ever post to the forums. I just recently bought my very first apple computer. It is a 2.4 ghz Macbook 13" and bought a Mini DVI to VGA Adapter so that I can connect it to my 46" Sharp AQUOS TV. I connect my laptop with the dvi to vga adapter plus another vga cable of course and all I get on the screen is my wallpaper but I can't see any of the icons on my tv screen, nothing.
Can anyone help me on this? Does this sound like a familiar problem?
I would appreciate your help.
Thanks in advance,
Dogan

Hi DoDolom,
First, welcome to Macintosh!
Secondly, it sounds to me like what's happened is that OS X has extended your desktop onto a second monitor. Plug in an external mouse and keyboard and then close the MacBook's lid. It will go to sleep. Use the external mouse/keyboard to wake it up and you should be running on just the external display.

Mini dvi to vga adapter doesn't fit Mac Book port

I bought a "mini dvi to vga" adapter at the local Apple store at the mall and it does not fit the mini DVI connection on my Mac Book. What is the correct mini dvi configuration or part number for the Mac Book Mini dvi port?

It may be. I threw the bag out so I can't check. I was in a hurry and thought I picked up the right adapter but guess not.
Thanks for your help. Know anyone that needs a mini vga to vga adapter?

Mini- DVI to VGA adapter Or is that, DVI to DVI?

I am having difficulty figuring out which adapter to purchase if I want to use my MacBook to make a Keynote or PowerPoint Presentation with an LCD projector.
Do I need the Mini- DVI to VGA adapter, or is it DVI to Video adapter, or DVI to DVI adapter? Good grief! I've made fabulous-looking slides and just want to take my computer to the lecture hall, connect it to their projector, and give my talk. How does one decide which cable to get, if I don't know for certain what kind of projector they are using?
Aren't all LCD projectors standardized this way?
Thanks for the clarification.
~ john

As mentioned, VGA is much more common than DVI is on projectors, so the mini-DVI to VGA will certainly work more often than the mini-DVI to DVI will.
It costs $19USD, so I would get both and use the best option available to you when you get to the location and see what kind of projector they have.
You also may want to pack the VGA and a DVI cable just in case. You never know if the location will have one on hand, or if it gets misplaced just in time for your arrival.

Mini DVI to VGA Adapter M9320G/A on late09 mini

Can I use an Apple Mini DVI to VGA Adapter M9320G/A on a Mac Mini Late 2009 ?
Thanks everyone

Yes.

Mini DVI to VGA Adapter w/ extension cable

I would like to get a Mini DVI to VGA Adapter for my macbook. Does anyone know how it would would if I used it with a VGA extension cable. Any experience will be helpful

Depends on how long the cable is, and if it was of sufficient quality for computer use. The higher resolutions require better quality and shorter cables. You may get some signal loss for long cables. A standard monitor cable that comes with a computer monitor should be fine, but what kind of length extension cable are you talking about?

Apple Mini-DVI to VGA Adapter Problems in Boot Camp / Windows

I currently run Windows XP SP2 on my MacBook and recently purchased the Mini-DVI to VGA adapter so I could hook up the MacBook to an external projector, monitor, or TV to display what's on my Windows screen on the external device. However, when I connect it to any external device, it just goes nuts and sporadically continues to make the hardware connect and hardware disconnect sounds and doesn't allow for external output of the screen. Any suggestions...? Thanks!
Marc

I think I solved this problem.
It was in issue for me. My second monitor would only display the Windows XP screen when it was loading, then it would black out. I couldn't even move my mouse arrow to the other side. Then I fixed it, here's how (running Windows XP SP3):
1. Start > Control Panel > Appearance and Themes
2. Display
3. Go to tab "settings"
4. Double click the blue image with the "2" inside it. This is the second monitor, adjacent to your first, or primary, monitor. The blue box may be a desaturated, greyish blue, meaning that the monitor is disabled. Click it and it a box will pop up asking if you want to enable the monitor. Click OK, and then like magic, your monitor is resurected in it's Windows Glory! From there, adjust the resolution, and it should work perfectly.
This isn't a Boot Camp compatability issue, it's just a problem with the lack of familiarity that users of OS X have with using XP.
Have a nice day!
Message was edited by: BlakeTron
Message was edited by: BlakeTron

Apple Mini-DVI to VGA Adapter Resolution?

If I hook my macbook to my hdtv using the Apple Mini-DVI to VGA Adapter what's the highest resolution I'll achieve? Will it be the max resolution of the TV or the Macbook?

Hey,
These are the specs that Apple provides for the GMA 950.
"Extended desktop and video mirroring: Simultaneously supports full native resolution on the built-in display and up to 1920 by 1200 pixels on an external display, both at millions of colors."
Tom

HT1349 mini graphics to vga adapter for macbook how to install in windows 7.

mini graphics to vga adapter for macbook how to install in windows 7.
i have macbook with windows 7 operating system.

Can you be more specific?
What are you trying to do?

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

Cam I use Asus mini display to VGA adapter on mac with thunderbolt port

I don't have a apple mini display to vga adapter, but my friend have a Asus branded with similar design like apple, I have a presentation two days more, so I need answer quick!!!
My mac: 2012 mid 15 inch

I mean the Mini Display to VGA as in this website:
http://www.asus.com/support/FAQ/1002131/

Rocketfish RF-AP307 mini dispalyport to Vga Adapter

Similar Messages

Maybe you are looking for