Rogue AP - Not in sync with WCS and WLC

WCS - 7.0.164.0 and WLC - 7.0.98.0.
For some reason, I am seeing rogue ap alert on WLC and am not seeing on WCS.   How do I clean up database and sync with WCS and WLC.
I am seeing same thing with coverage holes.
- Allen -

Allen,
     On the WLC go to Management > SNMP > Trap Controls, make sure that you have the traps checked.
HTH,
Steve
*Please remember to rate helpful posts*

Similar Messages

  • License problem with WCS and WLC

    Hi All,
    I have planned to implement three WLCs and one WCS to manage them.
    AP count is as below :-
         WLC #1     -     10 AP
         WLC #2     -     10 AP
         WLC #3     -     20 AP
    When WLC #1 is down that connected 10 APs should failover to the WLC #3.
    So at normal scenarion, WLC #3 should need 30 AP license; to failover WLC#1 APs properly to the WLC #3
    My problem is, Can I load total AP license (40 license) to WCS without installing them to individual WLCs ?
    If it is possible i can cut off the additional 10 AP license, required to the HA and failover.
    or if I use a WCS may i need to buy additional 40 license to WCS seperately from 40 WLC license ?
    Thanks,
    Charith

    Yes, you required to have seperate licences for WLC & WCS.
    You cannot add WLC licence to WCS & vice versa.
    HTH
    Rasika

  • WCS and WLC WLAN Config not fully in sync

    Hi,
    We're facing the issue WCS and WLC WLAN Config is not fully in sync. WLC  showing server 1 is IP:10.160.22.151, Port:1812 but WCS server showing none even  after click on “Audit” button. Any idea how to resolve this issue? Is this causing any wireless problem? Attached is screen captured. Thanks for your help.

    You mentioned "audit". Have you done a WCS audit so the WLC and WCS are in SYNC?
    If you make a change on the WLC you will not see it in WCS UNLESS they are SYNC. You will see the term "mismatch".
    "Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
    ‎"I'm in a serious relationship with my Wi-Fi. You could say we have a connection."

  • I am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music in my phone?

    i am using windows 7 and itunes 11.7 my i phone 5s is not getting synced with my laptop it keeps showing backing up  please help i need to put music ?

    Hi,
    Have you managed to solve this problem? if yes, please highlight how you solved it...i'm facing same problem with my new Iphone 5S but udner Windows, thanks.

  • Have tried to install icloud 4.0 for windows and again it does not allow syncing with outlook 2013 calendar and contact using windows 8.1 and IOS 8.02 (unexpected error)? I thought itunes 12.0 and icloud 4.0 would solve issue but still same result.

    I have tried to install icloud 4.0 for windows and again is does not allow syncing with outlook 2013 calendar and contact, using windows 8.1 and IOS 8.02 (get - unexpected error)?

    Having same issues. had been syncing every few days with outlook 2007 contacts and calendar but since updated to 4.0.2 and latest itunes I get an error that it is unable to sync. I can't seem to find any solution.

  • TS3991 my iphone calendar is not syncing with icloud and my pc

    My Iphone 4 Calendar is not syncing with icloud and my PC - help

    If calendar events on your iPhone do not appear in your calendar on icloud.com, go to Settings>Mail,Contacts,Calendars>Default Calendar and make sure you have selected an iCloud calendar as your default, and not something else like On My iPhone, Gmail, Yahoo or and exchange account.

  • WCS and WLC AP values not fully in sync.

    I have recently added several new aps on my network,after they connect to the controller, I set a hostname, and change the ip address to a static. However, WCS still sees the aps by the old ip and host name despite going into each one, hitting audit, and then save, any way to fix this? Thanks.

    You may want to also consider the following:
    1) Both the WCS and the WLC need to be at the same major revs (i.e.: The if the WCS is at v4.2, then the WLC should also be at 4.2). Failure to do so results in some significantly bizarre behavior such as errors after an audit - at least that was my experience.
    2) You may have better success if you make the change from the WCS which pushes the change to the WLC and that way the WCS is already aware of the change. (Normally, this should work - I know of one instance where it does not: changing Master Controller Mode from the WCS).
    3) If you feel strongly about making the change in the WLC (and are running a newer version of code in the WCS/WLC - i.e.: 4.x), there is a setting that forces the WLC to send configuration changes to the WCS once APPLY and "Save Configuration" are clicked:
    From the *WCS*, click on Configure->Controllers and click on the controller you wish to change, and check the "Refresh on Save Config Trap" check box and click OK.
    This will cause the controller to push any configuration changes up to the WCS after an APPLY and "Save Configuration" are clicked.
    4) In terms of getting the WCS to actually synch up with the controller (assuming the WCS and WLC are at the same rev. levels), you may need to do what I did (this was subsequent to upgrading to v4.2 in both the WLC and WCS and having chronic "mismatch" status between the WCS and WLC):
    From the WCS:
    Configure->Controllers, check the controllers you wish to synch up. From the dropdown, select "refresh config from controller"
    Next, select the DELETE option (instead of the RETAIN option). I believe that there are bugs in the software that upgrades earlier revisions to 4.2. I know that it might seem undesirable to DELETE information in the WCS, however, if you choose "DELETE", it seems to get rid of the residual information from the previous revisions that did not upgrade properly and the WCS will now be in synch with the controllers. DELETING the other settings makes the audit errors go away.
    Subsequent audits may go better for you after performing the step shown above. However, you may need to repeat this process in item 4 above once or twice more until the database gets cleaned up, but after that my own experience has been that the WCS and WLC will eventually stay in synch.
    It is unfortunate that we are forced to come up with workarounds like these when the software should clearly be able to handle this on its own, but we do what we must to get the job done.
    Hope this helps,
    - John
    (Please rate helpful posts)

  • TS4118 Ever since I got the iphone 5  my phone/icloud calender and contacts will not remain synced with Outlook.  I am constantly having to sign in and sign out and  unlink and re link to Outlook.

    Ever since I got the iphone 5  my phone/icloud calender and contacts will not remain synced with Outlook.  I am constantly having to sign in and sign out and  unlink and re link to Outlook.  this creates multiple categories of contacts and calenders and I have no idea which is syncing with my phone, ipad, outlook.  Help.  thanks.

    Sounds like the Outlook plugin isn't working properly.  You could try a couple of things:
    Go to Start>Control Panel>Add/Remove Programs, uninstall iCloud, the download and install the iCloud contol panel for Windows again from here: http://support.apple.com/kb/DL1455.  Then sign back into your iCloud account and check your syncing settings again.
    Uninstall iTunes and all of its components as by following this guide exactly: Windows XP or Windows Vista/7, then reinstall iTunes.  You must follow this guide exactly or it will not be successful.  (Uninstalling iTunes will only remove the application; it will not touch your iTunes library or data.)  This will replace the Outlook plugin.
    Then try your calendar again and see if it will sync properly now.

  • I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart

    I have iphone 3gs ios 6.1.3 .. I have a problem I can not look contact profile and save it. I already sync with outlook and windows books also can not be seen. I tried to add a contact on the contact menu, but the result like restart ... (but not restart the device, not just stored). I am confused about this issue ... please help ..
    thank you in advance.

    Your suggestion worked perfectly.  I can't believe there is nothing in any of the instructions I have seen online at the Yahoo and Apple help sites about the making sure the right default account is checked.  I don't think I was even aware there was a "default account" setting.  Thank you so much.

  • I cannot sync my Notes between my ipad, my iphone and my mac, despite setting Notes to sync with iCloud

    I cannot sync my Notes between my ipad, my iphone and my mac, despite setting Notes to sync with iCloud. Any Suggestion?

    perfect. ok do the following:
    settings > mail, contacts, calendars > go into the exchange account. You should have an email in the account field...[email protected] or [email protected], etc.... I am assuming you don't remember the password to this exchange account so once you know the email, you can go to email providers site and click on forgot password and you will go through the steps to get a new password. Once you do this, you will need to go back into your "exchange account " and the field that has the exchange email > touch the > to open settings. Change the password to your new password you got from above. Once you do this, you can add the exchange account to your ipad and all of your contacts will sync to both devices.
    Please confirm.

  • HT1386 I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes? How can i fix it?

    I unplugged my iphone while it was syncing with itunes and now it will not sync new music that I have added to itunes?

    iPhone User Guide
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

  • Does anyone know about the privacy policies regarding Notes written on iphone? What about if they are synced with Gmail and get sent to All Mail folder?

    I recently found all of my notes (written on my iphone) in my All Mail folder (of my gmail). I think this is because I had selected that my Notes by synced with my Gmail (under Gmail account settings). So I experimented by unsyncing it, then wrote a few more notes, and they stopped appearing in my Gmail All Mail folder. Then, to check, I re-synced it, and wrote some more notes, and they still have not shown up in my All Mail folder. I am freaked out about the unreliability of the systems regarding my personal notes I wrote to myself--both about personal things and to do lists... The fact that it is SO iffy and unclear (Where the notes go and why, where else they may have ended up), is super frustrating to me. What are Apple's privacy policies? Icloud's privacy policies? Gmail's privacy policies? Ergh.
    -Frustrated by unreliability and lack of clarity pertaining to personal documents and where they go and where they are stored (even after deletion).

    If you go to settings , notes , you can switch we're you want them to go for default. But both your gmail and iCloud have password protection so unless you give someone your password I'm positive nobody can see them. You should also have if you don't already a password on your iPhone to unlock it. Good luck

  • Any recommendations on productivity for database and project management, Bento was good but no longer sync with ical and address book

    I've unfortunately updated to the new Bento on MakBook and iPad and synced my data and in the process it tells me that iCal and Address books will not sync any more.  I have several projects I am working on and looking for something that will syn with iCal, address book and Busy Cal to manage my  time efficiently and seamlessly. Help?

    I think you're in the wrong forum - this is for developers, who write programs for apple products.
    As for Bento, their problem is due to Apple's changes in the API.  The code that syncs with calendars and contacts is now deprecated, which means at some point in the future, it will no longer work.  This problem will affect all developers, so you probably won't find any replacement for Bento.

  • Business partner creation - Not in sync with customer numbers -

    Hi All
    I am trying to do the BP conversion in collections management.
    The customer number range for account group ZXXX  is (80000 to 89999) and the external number range flag is not selected.
    I have created created a number range Y2 through BUCF, with numbers from (80000 to 89999), I did not choose external flag, thinking it should be same as customer number range. I have created a BP group ZXXX and assigned this number range Y2.
    Later when I did the BP conversion through MDS_LOAD_COCKPIT, I observed that the BPs are not in sync with the customer numbers.
    So my question, should I have choosen external number range flag in BUCF, even though its not selected in the customer number range? Has this caused the issue?
    Please help me understand this and rectify this issue.
    thanks in advance.
    Krishna

    Hi Christobal,
    Thank you so much for you response. 
    As suggested, I have checked BP number range as external. Later when I ran MDS_LOAD_COCKPIT, I get the below messages
    Grouping ZXXX has external number assignment, enter a number
    Partner data processed with key PartnerGUID 4E1BD7375F080AE0E10080000A5B030E
    Grouping ZXXX has external number assignment, enter a number
    So is there any other setting which I might be missing?
    Please advise.
    Thanks
    Krishna

  • IPad syncing with iCloud and Exchange = problems ?

    Greetings,
    I am using Apple products since 2 years ago. Everything started with an iPod Touch 64 and things grew to an iPhone4, iPad and now, an iPad 2.
    I also have a Motorola Xoom (Honeycomb 3.2 based), a Samsung Galaxy S2 and a HTC Desire Z with Android 2.3.3.
    All devices are configured to sync mails, calendar, contacts, notes and tasks with an Exchange Server. Until iOS5 and iCloud, there were no problems whatsoever. Contacts created on any device used to replicate to the others without a problem, although the iDevices (iOS based) never understood “categories”, a resource commonly used in an outlook environment to help sorting things out.
    Last week, Ibought the iPad2. Updated it and configured it to use the same Exchange Server as the other devices. Also, I chose to use iCloud.
    After that, I noticed that on a daily basis, contacts would appear without categories, first day, a few, around 5. Second day, 10 more. Third day, more 20. After the second day, I also noticed that the “display as” field (also known as “FiledAs”) was starting to show names with Last, First order. Here in Brazil we sort names as First Last. Of course, outlook, all android devices and also the iPad were all configured correctly (First, Last).
    The problem was getting bigger every day. Yesterday, 900+ of my almost 2000 contact list were mixed up, missing their categories and also had their first and last names changed in the Filed As field.
    After deleting, editing, restoring backups etc. more than once, I have finally found that the iCloud is probably the culprit.
    Changed my iPad config to keep from syncing with iCloud and configured it to backup locally.
    Deleted all accounts in all devices, deleted all data from contacts. Configured the accounts and left the devices syncing. Restored a backup. All devices synced and received the contacts.
    Surprise: problem solved. So far, no missing categories, no inverted First, Last names. Maybe if anyone find himself in the same situation, it might help.

    I have the same problem. My MacPro isn't on Lion, as I have lots of software that isn't compatible yet. But I have 10.7.2. on my MacBookPro and iOS5 on my iPhone and iPad.
    I would like to go to iCloud for those devices that are capable to run it, but I do not want to loose sync services for my MacPro which is on 10.6.8. Will iCloud and MobileMe be in sync until 30.06.2012, so I can use them in parallel, or do I have to wait until all computers are updated to Lion?

Maybe you are looking for