ROI and color assigning

Hello all
I got a 'image editor' VI from forum that performs various color assignments (RGB) to the single image on different combinations.
 I want to modify it in such a way that I can  select a certain portion(ROI) and
assign a combination(eg;RG) on that part and select another ROI and assign a diffrent combination (RB) etc...
In final output image should contain an image with different RGB combinations on selected parts.
Thanks in advance
Attachments:
Jpeg Color Editor.vi ‏709 KB

Hi blue ,
I got some useful  information from a survey...
A study shows that SOA can be understood in two ways.
First, few companies understand SOA primarily as an IT-centric topic. Drivers to adopt SOA can be found in benefits that concern technology productivity and organizational improvements.
Second,The another group of companies considers SOA as a businessdriven paradigm and, therefore, adds strategic measures and business processes to the technical perspective of the first definition.
For the majority of the participating companies, investment decisions were based not only on ROI calculations. Strategic decisions were the main driver for SOA initiatives within the analyzed sample. Various approaches to quantify costs and benefits for the IT organization, business processes, and strategy could be defined. These measures are structured in the presented frameworks, which can
serve as blueprints for other companies to enhance the understanding of cost and benefit categories in SOA business case calculations.
The following nine critical success factors of SOA were identified:
■ Professional  management of project
■ Adequate communication and culture
■ Defined SOA governance
■ Transparent design process using enterprise architecture models
■ Highly qualified project members with business and IT backgrounds
■ Consideration of nonfunctional requirements
■ Top management support and explicit SOA strategy
■ Clear design guidelines for services
■ Choice of a suitable initial projectThese findings are also in accord with current literature on problems and critical
Regards
Raj

Similar Messages

  • Issue: color assigning, eyedropper, groups, type object and stuff

    Hi there!
    I have some wierd problems with my beloved illustrator. Eyedropper and swatches assigning seems to be wild... I will try to describe three situations: what is happening. Tell me please, what am I doing wrong...
    1. Group of shapes in one fill color, black for example.
    - I have group of black shapes, complex logo perhaps. They are literally grouped.
    - I want to change their fill color to white.
    - I select the grup with black arrow and choose white from swatches.
    - Nothing happens.
    - I have to ungroup shapes, then select them with black arrow and then I can change the color.
    2. Group of shapes in several fill colors: black, yellow and white for example.
    - I have several grouped shapes in different colors.
    - I want to change all of their fill colors to white.
    - I select the grup with black arrow.
    - Illustrator should show "?" in the Fill/Stroke part of the tools panel, becouse there are selected shapes with different colors. But instead I see completely different set of fill and stroke color. Probably ones I've used in some before action.
    - But OK, fine. I try to assign one color to all of my shapes anyway. But gues what?
    - Nothing happens.
    - I have to ungroup shapes, then select them with black arrow and then I see my "?" and then I can change the color.
    3. Text object, plain text, paragraph, grup of text layers - all the same.
    - I have some black text.
    - I want to change their fill color to white.
    - I select the text object with black arrow and choose white from swatches.
    - Nothing happens.
    - I have to use text tool to highlight my text and then I can change the color.
    In all those cases I use swatches or eyedropper to take color from another shape - result s the same. This is crazy... Don't know what to do. And the worst thing is I have same problems at work, where I use Mac, and at home, where I use Windows.
    Please help!

    I'm confused. Where do you see two copies of my text?
    http://drrop.it/files/5277fe05e9d8c.jpg
    Besides, I would say the easiest way would be to select object with black arrow (V), then use eyedropper (I) and click on my rectangle there. But I just can't. Maybe it's because in my file, you can see two layers of text and I see one...

  • Can I change Bookmark Folders labels colors and/or assign custom icons?

    I want to customize Bookmark Folders in Safari by changing label colors and/or assigning custom folder icon individually to each folder. Is it possible? How?

    Anyone...?

  • Need help understanding profiles and color management

    I made the big leap from inexpensive inkjets to:
    1 Epson 3800 Standard
    2 Spyder3Studio
    I have a Mac Pro Quad, Aperture, PS3, etc.
    I have a steep learning curve ahead, here's what I've done:
    1 Read a lot of books, watched tutorials, etc.
    2 Calibrated the monitor
    3 Calibrated the printer several times and created .icc profiles
    What I've found:
    1 The sample print produced by Spyder3Print, using the profile I created with color management turned off in the print dialog, looks very good.
    2 When I get into Aperture, and apply the .icc profile I created in the proofing profile with onscreen proofing, the onscreen image does not change appreciably compared with the no proof setting. It gets slightly darker
    3 When I select File>Print image, select the profile I created, turn off color management and look a the resulting preview image it looks much lighter and washed out than the onscreen image with onscreen proofing turned on.
    4 When I print the image, it looks the same as was shown in the print preview...light and washed out, which is much different than what is shown in edit mode.
    5 When I open PS3 with onscreen soft-proofing, the onscreen image is light and washed out...just like displayed in PS3 preview. If I re-edit the image to look OK onscreen, and print with the profile and color management turned off, the printed image looks OK.
    So, why am I confused?
    1 In the back of my simplistic and naive mind, I anticipated that in creating a custom printer profile I would only need to edit a photo once, so it looks good on the calibrated screen, and then a custom printer profile will handle the work to print a good looking photo. Different profiles do different translations for different printers/papers. However, judging by the PS work, it appears I need to re-edit a photo for each printer/paper I encounter...just doesn't seem right.
    2 In Aperture, I'm confused by the onscreen proofing does not present the same image as what I see in the print preview. I'm selecting the same .icc profile in both locations.
    I tried visiting with Spyder support, but am not able to explain myself well enough to help them understand what I'm doing wrong.
    Any help is greatly appreciated.

    Calibrated the printer several times and created .icc profiles
    You have understand that maintaining the colour is done by morphing the colourants, and you have understood that matching the digital graphic display (which is emissive) to the print from the digital graphic printer (which is reflective) presupposes a studio lighting situation that simulates the conditions presupposed in the mathematical illuminant model for media independent matching. Basically, for a display-to-print match you need to calibrate and characterise the display to something like 5000-55000 kelvin. There are all sorts of arguments surrounding this, and you will find your way through them in time, but you now have the gist of the thing.
    So far so good, but what of the problem posed by the digital graphic printer? If you are a professional photographer, you are dependent on your printer for contract proofing. Your prints you can pass to clients and to printers, but your display you cannot. So this is critical.
    The ICC Specification was published at DRUPA Druck und Papier in Düsseldorf in May 1995 and ColorSync 2 Golden Master is on the WWDC CD for May 1995. Between 1995 and 2000 die reine Lehre said to render your colour patch chart in the raw condition of the colour device.
    The problem with this is that in a separation the reflectance of the paper (which is how you get to see the colours of the colourants laid down on top of the paper) and the amount of colourant (solid and combinations of tints) gives you the gamut.
    By this argument, you would want to render the colour patch chart with the most colourant, but what if the most colourant produces artifacts? A safer solution is to have primary ink limiting as part of the calibration process prior to rendering of the colour patch chart.
    You can see the progression e.g. in the BEST RIP which since 2002 has been owned by EFI Electronics for Imaging. BEST started by allowing access to the raw colour device, with pooling problems and whatnot, but then introduced a primary ink limiting and linearisation.
    The next thing you need to know is what colour test chart to send to the colour device, depending on whether the colour device is considered an RGB device or a CMYK device. By convention, if the device is not driven by a PostScript RIP it is considered an RGB device.
    The colour patch chart is not tagged, meaning that it is deviceColor and neither CIEBased colour or ICCBased colour. You need to keep your colour patch chart deviceColor or you will have a colour characterisation of a colour managed conversion. Which is not what you want.
    If the operating system is colour managed through and through, how do you render a colour test chart without automatically assigning a source ICC profile for the colourant model (Generic RGB Profile for three component, Generic CMYK Profile for four component)?
    The convention is that no colour conversion occurs if the source ICC device profile and the destination ICC device profile are identical. So if you are targetting your inkjet in RGB mode, you open an RGB colourant patch chart, set the source ICC profile for the working space to the same as the destination ICC profile for the device, and render as deviceColor.
    You then leave the rendered colourant test chart to dry for one hour. If you measure a colourant test chart every ten minutes through the first hour, you may find that the soluble inkjet inks in drying change colour. If you wait, you avoid this cause of error in your characterisation.
    As you will mainly want to work with loose photographs, and not with photographs placed in pages, when you produce a contract proof using Absolute Colorimetric rendering from the ICC profile for the printing condition to the ICC profile for your studio printer, here's a tip.
    Your eyes, the eyes of your client, and the eyes of the prepress production manager will see the white white of the surrounding unprinted margins of the paper, and will judge the printed area of the paper relative to that.
    If, therefore, your untrimmed contract proof and the contract proof from Adobe InDesign or QuarkPress, or a EFI or other proofing RIP, are placed side by side in the viewing box your untrimmed contract proof will work as the visual reference for the media white.
    The measured reference for the media white is in the ICC profile for the printing condition, to be precise in the WTPT White Point tag that you can see by doubleclicking the ICC profile in the Apple ColorSync Utility. This is the lightness and tint laid down on proof prints.
    You, your client and your chosen printer will get on well if you remember to set up your studio lighting, and trim the blank borders of your proof prints. (Another tip: set your Finder to neutral gray and avoid a clutter of white windows, icons and so forth in the Finder when viewing.)
    So far, so good. This leaves the nittygritty of specific ICC profiling packages and specific ICC-enabled applications. As for Aperture, do not apply a gamma correction to your colourant patch chart, or to colour managed printing.
    As for Adobe applications, which you say you will be comparing with, you should probably be aware that Adobe InDesign CS3 has problems. When targetting an RGB printing device, the prints are not correctly colour managed, but basically bypass colour management.
    There's been a discussion on the Apple ColorSync Users List and on Adobe's fora, see the two threads below.
    Hope this helps,
    Henrik Holmegaard
    technical writer
    References:
    http://www.adobeforums.com/webx?14@@.59b52c9b/0
    http://lists.apple.com/archives/colorsync-users/2007/Nov/msg00143.html

  • Transparency and color blend space: fail!

    Hi there. I keep trying to export my pdf, to no avail.
    I get an error that pops up that says there is an error with my transparency and color blend space.
    HOWEVER, all my images are set to CMYK (it says so in the links panel) and my transparency blend space is also set to CMYK. I have no errors in my preflight panel. When I ignore the message and continue to export, the image looks completely different and not the way I want it to show up.
    Please let me know how I can fix this error! Thanks so much!

    Document CMYK is the assigned profile in Edit>Assign Profiles.... Working CMYK is Color Settings...>Working Spaces>CMYK. If there's no profile assigned, document and working are the same. So in this case Document CMYK is Coated FOGRA27 and Working CMYK is US Web Coated SWOP—the assigned FOGRA is color managing the document's native CMYK colors not the working US SWOP

  • Select multiple ROIs and set properties to each of them

    Hi all,
    I am now working on a project dealing with thermal camera images. What I need to do is to set several regions of interests and assign some specific properties like average temperature and emissivity to those ROIs.
    So I was wondering:
    1. is that possible to select several ROIs with an array keeping updating ROIs the user has chosen on the front panel? (Or each ROI could have a cluster on the front panel that contains its properties, that can be changed later.)
    2. is that possible to set specific properties like temperature to the specfic ROI, and those properties will be updated to the ROI?
    Thank you so much, and looking forward to some great ideas or advice.
    Cheers,
    Sunming
    Solved!
    Go to Solution.

    Hi All,
    The attachment is what I have currently made. However, instead of creating a .txt file to display information, it would be perfect to display the ROI's name and its properties in the front panel, like in the first column is ROI 1, ROI 2, ROI 3, etc., and the other columns will deal with some information about the specific ROI and its properties.. Since I could not find anything similar here, I really need your help.
    Thanks,
    Sunming
    Attachments:
    test.vi ‏57 KB

  • AE Organizer 13 Mac how do I change all the subcategory keyword tags and colors

    I have a long list of categories and subcategories. I need to assign different colors to the category and subcategory tags (matching subcategory colors to the respective category). I can change the category tag and color but not the subcategory?? What am I doing wrong?
    Elements Organizer 13 for Mac
    Thanks

    Try:
    Order product | Platform, language swap

  • How do I change font and colors back to default?

    I have changed the font and color of the text through the tools button and the options button and the content tab. I find nothing telling me how to change the font and colors back to default font and colors. Can you advise me? I'm using Windows 7 Home Premium OS. Thanks.

    Hi Brenda19605,
    You can use this article to set the fonts and colors: https://support.mozilla.org/en-US/kb/change-fonts-and-colors-websites-use?esab=a&s=font&r=0&as=s
    The default settings for the font are in this article:
    https://support.mozilla.org/en-US/kb/Some%20text%20shows%20up%20bold%20after%20upgrade
    Unfortunately for the default colors has no good reference. But for text it is black (most lower left) color, background is white (most upper left color). Unvisited links is blue (column 8, row 5) and visited link is purple (column 9, row 5).
    Let me know if you need anymore help!
    Lordfreak

  • Problem with adjusting both transparency and color of an object

    I am writing a program where when an object is picked, both it's transparency and color will be altered (the object will become opaque, and its color will turn to a predefined "selected" color), while the previously selected object will return to its original transparency and color. I am able to get this to work, except that objects that were picked two or more picks ago will remain in the selected color, albeit in their original transparency. This problem only seems to occur when transparency is factored in. The picking/color & transparency altering code is as follows.
    public class PickingListener extends MouseAdapter {
         private PickCanvas pickCanvas;
         private TextDisplay overlay;
         private Primitive p;
         private Primitive lastP;
         private ColoringAttributes origColor;
         private TransparencyAttributes origTransparency;
         public PickingListener(PickCanvas pickCanvasArg, TextDisplay overlayArg) {
              pickCanvas = pickCanvasArg;
              overlay = overlayArg;
         public void mouseClicked(MouseEvent e) {
              pickCanvas.setShapeLocation(e);
              PickResult result = pickCanvas.pickClosest();
              if (result == null) {
                   System.out.println("Nothing picked");
              } else {
                   p = (Primitive) result.getNode(PickResult.PRIMITIVE);
                   if (p != null) {
                        setSelectedColor();
                        overlay.setPickedBarInfo((BarInformation) p.getUserData());
                   else
                        System.out.println("null");
         private void setSelectedColor() {
              ColoringAttributes barCA = new ColoringAttributes();
              TransparencyAttributes barTransp = new TransparencyAttributes(TransparencyAttributes.NICEST, 0.0f);
              barCA.setColor(ColorConstants.SELECTED);
              if (lastP != null) {
                   lastP.getAppearance().setColoringAttributes(origColor);
                   lastP.getAppearance().setTransparencyAttributes(origTransparency);
              origColor = p.getAppearance().getColoringAttributes();
              origTransparency = p.getAppearance().getTransparencyAttributes();
              p.getAppearance().setColoringAttributes(barCA);
              p.getAppearance().setTransparencyAttributes(barTransp);
              lastP = p;
    }Capabilities to alter the primitive's color and transparency are all set.
         barAppearance.setCapability(Appearance.ALLOW_COLORING_ATTRIBUTES_READ);
              barAppearance.setCapability(Appearance.ALLOW_COLORING_ATTRIBUTES_WRITE);
              barAppearance.setCapability(Appearance.ALLOW_TRANSPARENCY_ATTRIBUTES_WRITE);          barAppearance.setCapability(Appearance.ALLOW_TRANSPARENCY_ATTRIBUTES_READ);
    ColoringAttributes barCA = new ColoringAttributes();
    barCA.setCapability(ColoringAttributes.ALLOW_COLOR_WRITE);
    barCA.setCapability(ColoringAttributes.ALLOW_COLOR_READ);)
    Any insight as to why this would occur would be greatly appreciated.
    -Adrian Benton

    A Behavior is the preferred way to make changes in a scenegraph. Here is an example from a previous post that changes the appearance of a shape when it collides with another shape.
    The javadoc for javax.media.j3d.Behavior appears to refer to the issue you have.
    Transparencies are confusing, different display adapters deal with them differently. Suggest you search the forum at
    http://forums.java.net/jive/forum.jspa?forumID=70
    for more detailed information.
    regards
    class CollisionDetector extends Behavior {
      private static final Color3f highlightColor = new Color3f(0.0f, 1.0f, 0.0f);
      private static final ColoringAttributes highlight = new ColoringAttributes(
          highlightColor, ColoringAttributes.SHADE_GOURAUD);
      private boolean inCollision = false;
      private Shape3D shape;
      private ColoringAttributes shapeColoring;
      private Appearance shapeAppearance;
      private WakeupOnCollisionEntry wEnter;
      private WakeupOnCollisionExit wExit;
      public CollisionDetector(Shape3D s) {
        shape = s;
        shapeAppearance = shape.getAppearance();
        shapeColoring = shapeAppearance.getColoringAttributes();
        inCollision = false;
      public void initialize() {
        wEnter = new WakeupOnCollisionEntry(shape);
        wExit = new WakeupOnCollisionExit(shape);
        wakeupOn(wEnter);
      public void processStimulus(Enumeration criteria) {
        inCollision = !inCollision;
        if (inCollision) {
          shapeAppearance.setColoringAttributes(highlight);
          wakeupOn(wExit);
        } else {
          shapeAppearance.setColoringAttributes(shapeColoring);
          wakeupOn(wEnter);
    }

  • I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    I want to connect my IMAC to TV with HDMI cable. I did it before going to Dispaly and Arrangments and then mirror. Now when I go to display I dont have to option of arrangements. Olny {Display and Color} pops up. Any ideas what happend to arrengements?

    For the "Arangements" option to appear, the external display must be turned on with the correct input selected and connected to the computer.  Then close system prefs, reopen, go to "Display" and "Arrangement" will be along the top. 

  • Background job fails for BDC profile creation and role assignment

    Hi Experts,
    I have created a BDC Function module for Tcode 'PFCG' for profile creation and role assignment, and called this FM in my zprogram. the problem is that when i run this program in foreground it executes succesfully, but if i schedule it in background it fails throwing error in job log 'Role 'Z...' does not contain any active authorizations'. But i have created one more program to create authorization objects which runs before this zprogram.I have also checked the authorization object in 'RSECADMIN', it reflects active. I dont understand whats happening exactly when it runs background.
    Below is the process of job
       1. ZMIS_AUTH_OBJECT_CREATE
           Variant : auth-create
       2. ZMIS_AUTH_ASSIGN_TO_ROLE
           Variant : auth-assign
    The problem is in second program, runs in foreground but fails in background.
    Code which i have written in my second program
    ***BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message.
    ***Generation of Profile created
    CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14  .
    Experts please help me out its very urgent. your help is appreciated and rewarded. Thanking you in advance.
    Regards,
    Chetan

    Hi Praveen,
    Yeah definately, my requirement is that I have to access of some BI reports to certain users, so contract data will be downlaoded from ECC on application server, need to read that file from application server and for the each contract i ahould create a authorization object, role creation and assigning of role to the user and profile generation and activation.
    To achieve this i have written two programs
    1) ZMIS_AUTH_OBJECT_CREATE- This program will create the Authorization Object using BDC and Role creation Using the BAPI
    "" Creation of Authorization Object
    CALL FUNCTION 'ZAUTHOBJ'
            EXPORTING
             ctu                    = 'X'
             mode                   = p_mode
             UPDATE                 = 'L'
    *   GROUP                  =
    *   USER                   =
    *   KEEP                   =
    *   HOLDDATE               =
             nodata                 = '/'
             g_authname_001         = 'ZDUMMY_MIS'
              g_targetauth_002       = wa_tab-auth
              g_authtxt_003          = wa_tab-short_desc
              g_authtxtmd_004        = wa_tab-med_desc
             marked_04_005          = 'X'
              g_authtxt_006          = wa_tab-short_desc
              g_authtxtmd_007        = wa_tab-med_desc
             tctiobjnm_04_008       = 'ZBUS_UNIT'
              g_authtxt_009          = wa_tab-short_desc
              g_authtxtmd_010        = wa_tab-med_desc
             marked_05_011          = ''
             opt_01_012             = 'EQ'
              low_01_013             = wa_tab-bu
              g_authtxt_014          = wa_tab-short_desc
              g_authtxtmd_015        = wa_tab-med_desc
             marked_04_016          = 'X'
              g_authtxt_017          = wa_tab-short_desc
              g_authtxtmd_018        = wa_tab-med_desc
             tctiobjnm_04_019       = 'ZCONTRCT'
              g_authtxt_020          = wa_tab-short_desc
              g_authtxtmd_021        = wa_tab-med_desc
             marked_05_022          = ''
             opt_01_023             = 'EQ'
              low_01_024             = lv_contract
              g_authtxt_025          = wa_tab-short_desc
              g_authtxtmd_026        = wa_tab-med_desc
              g_authtxt_027          = wa_tab-short_desc
              g_authtxtmd_028        = wa_tab-med_desc
              g_authname_029         = wa_tab-auth
    * IMPORTING
    *   SUBRC                  =
           TABLES
             messtab                = temp_message.
    "" Creation of role
    LOOP AT it_role INTO wa_role.
          CLEAR wa_text.
          wa_text-text = wa_role-desc.
          wa_text-langu = 'E'.
          APPEND wa_text TO it_text.
          wa_jobrole-agr_name = wa_role-role_name.
          wa_parentrole-agr_name = 'ZM_CT_DUMMY_MIS'.
          wa_method-usmethod = 'CHANGE'.
          CALL FUNCTION 'ZBAPI_JOBROLE_CLONE'
            EXPORTING
              jobrole          = wa_jobrole
             parent           = wa_parentrole
             method           = wa_method
           TABLES
    *   RETURN           =
             shorttext     = it_text
    *   LONGTEXT         =
    *   MENU_NODES       =
    *   MENU_TEXTS       =.
        ENDLOOP.
    2) ZMIS_AUTH_ASSIGN_TO_ROLE - This program will generate the profile created assign it to the role.
      ""*BDC for Profile creation and assignment to Roles
        CALL FUNCTION 'ZROLE'
          EXPORTING
           ctu                     = 'X'
           mode                    = p_mode
           UPDATE                  = 'L'
    *   GROUP                   =
    *   USER                    =
    *   KEEP                    =
    *   HOLDDATE                =
           nodata                  = '/'
            agr_name_neu_001        = wa_role-role_name
            text_002                = wa_role-desc
            text_003                = wa_role-desc
            text_004                = wa_role-desc
           value_01_005            = 'T-ML330881'
            h_fval_low_01_006       = wa_role-auth
            profn_007               = lv_profile
            ptext_008               = lv_text1
    * IMPORTING
    *   SUBRC                   =
         TABLES
           messtab                 = temp_message .
       COMMIT WORK AND WAIT.
    ""*Generation of Profile created
      LOOP AT it_role INTO wa_role.
        CALL FUNCTION 'PRGN_AUTO_GENERATE_PROFILE_NEW'
         EXPORTING
           activity_group                      = wa_role-role_name
    *     PROFILE_NAME                        =
    *     PROFILE_TEXT                        =
          no_dialog                           = ' '
          rebuild_auth_data                   = ''
          org_levels_with_star                = ' '
          fill_empty_fields_with_star         = 'X'
          template                            = ' '
          check_profgen_tables                = 'X'
          generate_profile                    = 'X'
          authority_check_pfcg                = 'X'
       EXCEPTIONS
         activity_group_does_not_exist       = 1
         activity_group_enqueued             = 2
         profile_name_exists                 = 3
         profile_not_in_namespace            = 4
         no_auth_for_prof_creation           = 5
         no_auth_for_role_change             = 6
         no_auth_for_auth_maint              = 7
         no_auth_for_gen                     = 8
         no_auths                            = 9
         open_auths                          = 10
         too_many_auths                      = 11
         profgen_tables_not_updated          = 12
         error_when_generating_profile       = 13
         OTHERS                              = 14
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDLOOP.
    For creating authorization objects, role & profile i have created one dummy auth, dummy role & dummy profile respectively.
    i have created dummy objects to copy the roles from dummy object and assign the same to new Auth obj, role & profile.
    Let me know what needs to be done. because these both the programs run perfectly in foreground, but fails in background.
    Regards,
    Chetan

  • How can I change the font and color of an email signature?

    How can i change the font and color of an email signature?

    Mail > Preferences > Signature
    Highlight the Signature.
    Click Format in the menu bar and select " Show Fonts".
    Select the Font.
    Highlight the Text.
    Click Format in the menu bar and select " Show Colors".
    Select the color.
    Mail > Preferences > Composing > Message Format:  Rich Text
    Best.

  • I would like to print links as regular text i.e. not underlined or in a different font and color.

    I have created a page with my resumé, using Dreamweaver CS4 on my iMac (running OS X 10.6.6).  You can see the page here: http://www.peterforkes.com/Resume.html
    It looks great when it is on the screen, but when I print it I would like the links to not be underlined and also to be displayed in the same font (and color) of the text surrounding it (a link is largely useless on a piece of paper, if it it not showing the URL).
    So, I created a stylesheet called "print.css" and have this in it:
    a:link {
    text-decoration: none;
    In my html document (Resume.html)  I have this code, at the top:
    <link href="_css/Resume.css" rel="stylesheet" type="text/css" media="screen" />
    <link href="_css/Print.css" rel="stylesheet" type="text/css" media="print" />
    Now, things such as the graphics in my document do not print out (this is how I want it) but links seesm to be doing unexpected things for me.  As I mentioned, when I print the page I would like them to:
    a) not print with an underline (which I would expect the code snippet shown above to do).
    b) I would like the link color to be the same as the surrounding text (I have links in several places, such as in <h2>, <h3> and <p>).
    c) I would like the link to have the same font and text size as the surrounding text.
    Any help is always appreciated.
    Peter A. Forkes

    You've solved it for a:link but you may print the page with the <a> tag in link or visited state so you need to cover both.
    In http://www.peterforkes.com/_css/Print.css
    change
    a:link {
    text-decoration: none;
    to
    a:link, a:visited {
    color: #333;
    text-decoration: none;

  • Is there a way to change the font size and color of text in the calendar app?

    Does anyone know a way of changing the font size and color of text in the calendar app that comes with the iPad 2?  It is very hard to see the small gray numbers on the calendar.  Thanks

    Looks like you didn't get a reply on your post, but it is still a problem.  Font size is supposedly changeable via "Accessibility" in Settings, but it doesn't work.  You can turn on "Zoom".

  • How to create Search help exit, and then assign it to a collective search

    hi gurus,
    i have an intersting question for you, well my scenario is like i have to create a search help exit using some function module cause i didt found table for my search help but i can find the value through FM, i know we can create a search help exit and then assign it to collective search help,
      my problem is what are the parameters i need to pass to this search help exit FM, and in the function module i want to use the value entered on the f4 selection screen to extract data through FM. i need to give a solution  asap.
    any reply will be highly appreciated
    n rewards points for sure.
    thanks mandy

    Hi mandy,
    Have a look at this code,
    FUNCTION SHLP_SHOW_LIST.
    ""Local interface:
    *"  IMPORTING
    *"     VALUE(PLANT) TYPE  WERKS_D OPTIONAL
    *"     VALUE(DISPLAY_ONLY) TYPE  FLAG OPTIONAL
    *"  EXPORTING
    *"     REFERENCE(ITEM_SELECTED) TYPE  CHAR20
    *"  EXCEPTIONS
    *"      POPUP_CANCELED
    TYPE-POOLS SHLP .
    CONSTANTS:
            co_shlpname            TYPE shlpname   VALUE 'SHLP_CONTAINER',
            co_shlpfield_itemalias TYPE ddshlpsfld VALUE 'CONTAINER'.
      DATA: l_shlp         TYPE shlp_descr_t,
            l_subrc        TYPE sysubrc,
            l_return_tab   TYPE STANDARD TABLE OF ddshretval,
            l_return_wa    TYPE ddshretval,
            l_interface_wa TYPE ddshiface.
    Get details for search help
      CLEAR l_shlp.
      l_shlp-shlpname  = co_shlpname.
      l_shlp-shlptype  = 'SH'.
      CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
           CHANGING
                shlp = l_shlp.
    Assign virtual screen field
      READ TABLE l_shlp-interface INTO l_interface_wa
      WITH KEY shlpfield = co_shlpfield_itemalias.
      l_interface_wa-value      = space.
      l_interface_wa-valtabname = 'X2'.    "virtuel screen field
      l_interface_wa-valfield   = 'Y2'.    "virtuel screen field
      MODIFY l_shlp-interface FROM l_interface_wa INDEX sy-tabix.
    Call F4 popup
      CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
           EXPORTING
                shlp          = l_shlp
                disponly      = display_only
           IMPORTING
                rc            = l_subrc
           TABLES
                return_values = l_return_tab
           EXCEPTIONS
                OTHERS        = 0.
      IF sy-subrc = 0 AND l_subrc = 0.
      Value selected
        READ TABLE l_return_tab INDEX 1 INTO l_return_wa.
        item_selected = l_return_wa-fieldval.
      ELSE.
      Popup canceled / no value selected
        RAISE popup_canceled.
      ENDIF.
    ENDFUNCTION.
    make sure to call these FMs and populate accordingly...
    Thanks
    Madhu

Maybe you are looking for