Roland Edirol, NEED TRACKING HELP!!!!! Weird Problem!

I need the help of one of you experts...
New to Logic but have used GarageBand for years. I am using a Roland Edirol UA-25EX interface. I am attempting to track a bass part in a project but have encountered a weird problem.
When I play the bass with the rest of the project (MIDI Drums and Piano) the input signal is at a constant state of peaking no matter how hard I play. I assumed that I was just sending to much signal into the computer from the interface so I soloed my bass track and all of a sudden it sounded fine (levels were good - no peaking). Then I un-soloed the track again and the crazy peaking was back.
After playing around with Logic and the Edirol for a few hours I couldn't trouble shoot the problem. I decided to hit record and see if Logic was recording the peaked out sound I heard (UNSOLOED) or the normal non-peaked bass tone I heard when it was soloed out. Sure enough when I listened back to the recording everything sounded fine!!
Thats good I guess... but I cannot track the bass part with the peaked out sound and when I turn it down to try and get rid of the clipping, I can't hear the bass enough.
Can someone help me with this please?!?!? Point me in a direction at least to try anything.....

I have an Edirol UA-25 that has drivers that stop working anytime there is an upgrade or sleep. You should write to Roland and complain, they were friendly and sent a zip of 10 copies of the driver and it's un-installer, so if,like today i let my iMac fall sleep the driver no longer works and I must unplug the USB Edirol,un-install the broken driver and install a new one before the Edirol will work again-I am on 10.5.8, hopefully the Snow Leopard drivers will be better. your "ex" model differs only in it's having a ground loop isolator, which I had to buy separately and it works fine but still not fair of Roland to sell such crap.

Similar Messages

  • Genius needs to help! problems with my video card and system

    Hey guys! I'm going to post my specs first so that you get a good idea of what I'm running on:
    MSI Neo2 LS 865PE.....MAT=Slow
    Pentium4 2.4C.....FSB=233=2.8C hyperthreading enabled ~>1.55V
    Corsair TwinX 1gig PC3700.....memory on "AUTO" in BIOS with timings at 3,4,4,8 ~> 2.7V
    Radeon 9700NP.....stock speeds ~>1.7V
    AlienX case with 2 fan400 watt power supply and 6 case fans
    Zalman Alum/Copper heatsink fan
    1:I've had this motherboard for a few months now. I upgraded my video card from a nVidia Ti4200(128meg) to a Radeon 9800 a month ago, but I couldn't get it working at 8X AGP, no matter what voltages I threw at it. I returned it for a Radeon 9700NP hoping that it would work, but it still won't.
    I'm using BIOS 1.9 and since there is no option to select your AGP speed, I could only try using ATI's drivers. Once booted into Windows, there is a slider you can move to select you AGP speed. On my machine It says that It has performed some tests and has concluded that AGP 4x is the best for my system....but my system supports AGP 8X!
    I've moved the slider over to 8x (which requires a reboot) at least 5 times with each card but the slider refuses to move past 4xAGP after the reboot.
    2: My second problem: I had an old stick of KingMax PC3200 and decided to buy 3 more sticks. Unfortunatly, the 3 I bought did not match the one I had, so I only put 2 of the new sticks I bought into my system. Immediatly, My system would crash, lock up, files were corrupt, and I got PLENTY of blue screens of death with a long message containing: 0x0000007  with all these other numbers and "0"s. I did a search online and found out I had a hardware incompatibility problem. I never got this with my old stick of ram.
    I returned the 3 sticks of Ram and replaced them with the Corsair. Put my new Radeon 9700 in, formatted my hard drive....and within 24 hours, my system locked up 3 times, rebooted itself 5 times, and gave me the same BSOD as mentioned above with the same long message.  
    I didn't change anything except for the memory and the video card. I've been wanting to overclock, (thats why i bought the faster memory   ) but I'm not sure what to do at this point.
         I have my FSB at 233 but I'm scared to go any higher because of previous system instability at stock speeds. My RAM was running on 400 and MAT=Turbo with the most relaxed timings at 3,4,4,8.
    I've given myself hours of sleepless nights formatting when my system wouldnt boot into windows; overclocking....etc. I NEED HELP. PLEASE. PLEASE. Anything could work at this point.  
         I'm trying to get more info on how to run my system at a 5:4 ratio, also.  
    If anyone has problems like me or knows what could be the problem with my system, please reply to this post, it would help me a lot. I've been trying to fix these problems for a few months now so anything is greatly appreciated.  

    Thanks a lot to you guys that responded. I brought my computer home this past holiday and I want to let you know where I stand as of now. I guess this thread is like my blog for my computer. I want to clear some things before my first post makes everyone confused.
    1- I have only 2 sticks of memory in my system: the Corsair PC3700 TwinX 512x2
    I returned the 3 KingMax I bought, and still keep my old stick just in case.
    2- I am using the 400 watt power supply that came with the case. I read some reviews of the case and I know the reviewer did not have problems with the power supply. In my BIOS, there are some voltages it is weak on. Lets say: it it should be 5.00+, my power supply will be feeding it 4.96v or something like that, but I dont know, or think, that is a major problem...
    3- My computer will refuse to boot if memory speeds are set at anything below 400. SO....if I want to use a 5:4 ratio and have to set my memory speeds to "333" in BIOS, my system refuses to boot.
    4- This morning, I did manage to overclock my FSB to 250. Specs are as follow:
    Memory Timing @3,4,4,8,4.....speed set at "AUTO".....MAT at "SLOW"
    MY 2.4C's FSB was raised to 250 = 3.0gig  
    AGP/PCI frequency: 67.xx/3x.xx (cant go any lower)
    CPU voltage: 1.5500
    Memory voltage: 2.75
    Video Card voltage: 1.7
         Everything was fine for the whole day until I heard something click in my computer around midnight, and then seconds later, my computer froze and made a continuous beeeeeeeeeeeeeeeeeep. (you can imagine)
         This "click" and system crash has been plaguing me for months now. I dont know whay it happens. I was just using AIM when I heard the click and my heart stopped.
    My memory speeds have been set to "AUTO" even at the FSB of 250. But I don't know if this still means my system is at a 1:1 ratio. I know the BIOS then adjusts the memory to work at 500 if my FSB is 250...so I assume it is?    I love 3gig, but somehow I feel that 2.8 is faster, since the FSB=233 running parallel to my memory, also at 233
    A FSB of 250 is good enough for me, that's what I've been waiting 6 months for. If anyone knows how to set other ratios to achieve a FSB of 250+, please let me know, but as I said, my memory won't boot if its set at "333"

  • Need some help - having problems with Dell Workstation BIOS not making all RAM usable

    Hi,
    I'm having problems upgrading the RAM in my T7400 workstation. I previously had 8 x 1 Gb modules and I'm now trying to use 8 x 2Gb (total 16 Gb). This fills up all 8 DIMM slots on the motherboard.
    The replacement RAM is of the correct type, PC2-5300F DDR2, CL5, EEC Fully Buffered (same type as I had before). Each stick is also the same manufacturer (HP Micron), size, rank, timings etc. The problem is the BIOS won't recognise more than 8Gb as usable (it does detect all 8 sticks as it lists out all of the modules).
    This is what I've tried so far:
    Tested each module independently in DIMM slot 1 and it's recognised fine. (And I know all of the slots work, since I previously had 8 x 1Gb working ok).
    I tried putting 8 Gb in DIMM slots 1-4, still only reporting 4 Gb usable (all modules detected).
    I ran memory tests, everything checked out fine.
    I reset the CMOS with the RTC jumper (suggested elsewhere on the forums).
    I could find no bios option to remap memory.
    Windows 7 Pro also shows 16Gb installed but only 8Gb usable (this is not an OS issue, since the BIOS is showing the same problem, before it even gets to loading Windows).
    I haven't tried flashing the BIOS but I doubt this is the issue. I've been through the changelog of each revision after mine and it doesn't mention anything about fixes to memory detection (Also similar reports of my issue said upgrading the BIOS made no difference). I'd rather not mess things up when everything else runs smoothly and I'm very much out of warranty.
    Of course, Dell won't help directly without trying to bill me for technical support.
    Can anyone please suggest anything else I can try?
    Thanks for reading.

    Dimms that show half of the ram are High Density 4 rank and not compatible. Any ole Joes crab shack ram doesn't work. Only Specific vendors ram works. Buying ram based on a cheap price almost guarantees that its high density.  High density modules have less ram chips on them and are therefore cheaper.
    DDR2 PC2-5300 • CL=5 • Fully Buffered • ECC • DDR2-667 • 1.8V • 1024Meg x 72 •
    HIGH Density Ram WILL NOT WORK.
    http://www.crucial.com/usa/en/precision-workstation-t7400/CT3531857

  • Need urgent help.....facing a weird and new problem in safari

    guys, i have leopard installed on my macbook and my safari browser wont open orkut.com or any other service involving access through google account. But all these websites that is orkut and other ones can be opened in firefox which i have on my hdd. Whenever i try to open orkut or gmail in safari it says "you are not connected to internet" but simultaneously firefox is opening them and they are running good... I use a proxy server to access the net.. but i know its not a problem with the net.. it is the problem of the browser setting.. when i bought this macbook in canada it used to open orkut in safari.. dont know what happened to it here in india..
    plz help me.. i need your help guys.. i tried everything i could.

    Sorry to disappoint you, but it seems there is no solution yet. This is something thousands of people are experiencing with the Safari/Leopard combinations (as you can see on these and other boards), and it appears to be an Apple bug. I am having the same issue as you with certain web sites (i.e., can not load fully in Safari, but can in Firefox), but I can open orkut.com with Safari, for instance.

  • Weird Problem with X6, help please!

    I have got this weird problem with my nokia X6, it's display shows lines and merged colors when turned on. It started happening after I got my Nokia X6 fixed for broken screen, 15 days later after getting it fixed it started showing such display. I figured out somehow to unlock my phone while in such display horror and figured that opening a heavy app like OVI store brings back mobiles display. I don't want to send same people my mobile again. Just want to know what can be done to fix this problem. PLease Help!

    Yeah, it was a nokia care center. Anyway I fixed the problem luckily. It just needed some updates. I never thought not updating can cause this problem.

  • Help needed with a layout problem

    I'm trying to build a JTabbedPane where each tab has a grid of buttons. The number of buttons is variable, and I'd like the buttons to flow sort of like with FlowLayout, with four columns. I need all the buttons to be the same size, even across tabs. I tried GridLayout, which doesn't work when I have too few buttons to fill a row. It fails in different ways, depending on how I set things up. If I try to set the layout to GridLayout(0, 4) (four columns), then if one tab has one row and another has two, the buttons on the one-row tab expand vertically to the height of the two-row tab. If I try GridLayout(2,4), then if a tab has only one button, it expands horizontally to the maximum width of any of the tabs. (It also has the further problem that if the maximum number of buttons on any tab is 6, they are placed in a 2x3 array; I'm trying to get them to be 4 buttons on the first row and 2 on the second.)
    I'm hoping there's a standard layout manager that can do the job, but I'm not too familiar with the Swing manager classes. Can I get what I want without writing my own layout manager?
    Thanks,
    Ted Hopp
    [email protected]

    I didn't think it was specifically a Swing question.Well, its either Swing or AWT, people who develop GUIs are the ones who are going to have experience using layout managers.
    but if someone can point the way to how to do this with GridBagLayout, nested containersSince you finished reading the tutorial, what have you tried? You've explained your problems using a single layout manager, so what problems are you having using nested layout managers?
    If you need further help then you need to create a [Short, Self Contained, Compilable and Executable, Example Program (SSCCE)|http://homepage1.nifty.com/algafield/sscce.html], that demonstrates the incorrect behaviour.
    Don't forget to use the Code Formatting Tags so the posted code retains its original formatting. That is done by selecting the code and then clicking on the "Code" button above the question input area.

  • Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

    hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks 

    Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

  • Weird problem involving my external hard drive - help please!

    I recently got a formac mini 120 gb firewire hard drive, which had been working fine with my g4 quicksliver.
    i then went to a friends (g5 machine) with my drive and he put some data on it - bought it back to mine and managed to re connect the drive and take the data - no problem - very happy.
    I recently gave my drive to another friend using a g5 and when it came back, nothing - i don't get the drive symbol appearing. turned the comp on and off many times and tried re-connecting etc still no drive appearing.
    Then i took the drive to my friend with a mac lap top power book. connected there - working fine. Baffling. was happy that my data can still be accessed.
    I know it's not the firewire cable because i can get power to the drive - i can see the red light at the fron on.
    Can anyone help with this weird problem?
    Thanks

    Thought you could use this info about getting FireWire to work!
    First, you should always Repair Permissions in Disk Utility before and after any update; I would do that now. If you installed your update with FireWire plugged in, your Mac may not recognize it anymore.
    Try resetting your FireWire ports by disconnecting all FW devices, shut down your Mac and unplug it from AC power (wall socket) for 30 minutes. plug it back in and try FW.
    If that did'nt work, download the combo update from this site (yours may be corrupt), not Software Update, disconnect all firewire + USB devices except keyboard + mouse, Repair Permissions, re-install update, Repair Permissions again + try. Yours might be the 10.4.10 Combo update. I have no idea since you did not fill out your specs. fully when you signed in to this site. Others reading, download the Combo that applies to your system. This link is for PPC Macs not Intel Macs.
    If that still did'nt get it Zap the PRAM. While restarting Mac hold down the following key combo Command-Option-P-R. Keep holding those keys down till you hear the second start-up chime, then release.
    For those of you with Macs that are not PowerBooks or iBooks, a bad internal battery can cause FireWire to not be recognized, so make sure it's good! Also, here is Apple doc.#88338 on getting FireWire to work.
    Good Luck!
    Cheers!
    DALE

  • TS4040 I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs re

    I assumed this would help my problem with not being able to open apps like Preview or TextEdit since I installed Mountain Lion. Instead, first I'm prompted to enter a password, then once I do that, I get an error box telling me the Library needs repairing. So I click on Repair, and once again I'm prompted for a password, which I enter, then the same error box opens, and so it goes. Can anyone help me with this problem? I'd greatly appreciate it.
    Thor

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -Rh $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Step 1 should give you usable permissions in your home folder. This step will restore special attributes set by OS X on some user folders to protect them from unintended deletion or renaming. You can skip this step if you don't consider that protection to be necessary, and if everything is working as expected after step 1.
    Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

  • My airport problem has returned big time --Need some Help!!

    Aloha once again:
    I though that this was fixed by simply changing channels on my airport router, but that fix only lasted for a few days, but now it's back and even worse. Let me give you some background on this problem. Here's my original message concerning the problem:
    I have my Airport Router connected to the Internet via DSLcable. I then tie my two computers into the internet via their airport cards. For about 6 months this system has been working just fine. Recently my desktop computer quit listening to the router and can no longer connect to the internet. It shows no signal strength and the name of the network on the Airport is not seen in the "connect to internet" panel. The same Airport works just fine on my LapTop and I am using it right now to get this message off to the internet.
    I have fixed permissions, removed the airport card and cleaned the connector, the antenna plug and removed the system configuration folder from library preferences all to no avail!
    This problem has been hounding me, intermittently, for over a year now What can I do to remedy this??? HELP!!!!
    Dan Page
    Maui, Hawaii
    The suggestion to change channels, that came from this original request, worked but just for a very short time. Now I have to shut down my computer overnight to get connected and then it only lasts for several hours and the connection quits.
    I thought maybe heat was a problem, but the last time it happened I opened the computer and played a large fan right on the card. This did not help. I shut it down for the night and it was fine the next morning for about 2 hours.
    One new data point; if I turn off just the airport on my laptop computer overnight, that will fix the problem for a short time also.
    Still need some help!!!
    Dan

    First, power off both the Time Capsule and AirPort Express.
    Wait a few minutes, then power up the Time Capsule first, and let it run for a few minutes.
    Temporarily, move the AirPort Express to the same room or close proximity to the AirPort Express and power it up.
    If the Express powers up correctly, power it off again and move it approximately half the distance between the Time Capsule and the general area that needs more wireless coverage. Try to minimize obstructions like walls, ceiling, heavy furniture, etc as much as possible. 
    Please report on your results.

  • Having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online

    having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online even if it wil be shipped within u.s. only?

    To buy in for delivery in Qatar, you should be starting from the Apple Qatar site:
    http://www.apple.com/qa/
    Do you have an Apple-ID? if you do, then you should not have to enter your Address again, and may be able to sidestep the US Zip Code issue.

  • I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected. Please help me out!!

    I am facing a weird problem with my iphone 4s Wi-Fi connectivity. As i connect my iphone to my office Wi-Fi, internet works in one building, but it doesnt work in the other building, although the phone shows Wi-Fi is connected in the other building. This problem was not there earlier but has occured recently. I would also like to mention that none of my other colleauges who uses iphone are not facing this issue. Please help me out!!

    Assuming you entered the correct WiFi password for your network, see these articles:
    iOS: Troubleshooting Wi-Fi networks and connections
    iOS and OS X: Recommended settings for Wi-Fi routers and access points

  • Really weird problem with Usage Tracking!

    Hi guys
    We are running OBIEE 11.1.1.6.5 on Exalytics and allmost all is fine and dandy. We have though one weird problem. When we first enabled usage tracking, we sudddenly got some errors on some of our dashboards, saying that we didn't have the privilegies to create temporary tables. Allright we got our user (which is a shared user) the privilegies to create temporary tables, and the reports with the problems started working again! Awesome! But low and behold - then Usage Tracking stopped working, not a single mentioning in the logfiles about it. Maybe an error or, the acknowledgement that Usage Tracking has started, which is the normal.
    So basically we are running without Usage Tracking because the reports that gives us the problems are deemed more important... which they might be, but thats different story...
    Any ideas to what is going on here? We have collected Usage Tracking data, while the reports were broke, so im quite confident that the setup is correct. But why would it stop, when giving "create table" privilege to our shared user?
    Best regards, Jacob

    What is the setting for UsageTrackingDirectInsert?
    Have you tried chaging the output to file instead of database?
    Please see:
    http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/usage_track.htm#i1017237
    Section 9.3, "Setting Up a Log File to Collect Information for Usage Tracking"
    Michael
    PS:
    Hi Christian! :)

  • Need Urgent Help in PM8M-V H problem - keyboard freeze

    Hi everyone,
    I'm a newbie in this forum and I really need urgent help with my motherboard.
    My PC specification:
    Intel Pentium 4 2.4GHz
    MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
    1GB(512MB x 2) Kingston PC3200 400MHz
    Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
    Power Color ATI Radeon 9550 256MB
    Lite-On DVDRW SHM-165P6S
    USB mouse, PS/2 Keyboard
    I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows.  Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
    However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?   
    I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
    Thanks.

    But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
    What version of BIOS should I use?? Any recommendation ??
    Thanks.

  • Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

    Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

    Please get your checkbook ready. (Only kidding.)
    Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
    In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
    That's a start.

Maybe you are looking for