ROLAP cube aggregation deployment failure
Hi All
My ROLAP cube aggregation deployment is failing with following error:
dbms_odm.createcubeleveltuple ORA-06533: Subscript beyond count
Has anyone got any idea about this failure please ?
Hi Bonniejp,
According to your description, it seems that it's a permission issue when deploy project to Analysis Services. By default, the default account for AS services has only public permission to few databases. If you haven't change the AS services
account, or haven't grant the permission for this account, then you cannot deploy the AS project to server.
So in your scenario, to avoid this issue, you can grant the SELECT permission for the default account for AS services to data source DB (Adventure Works DW2012). Or you can change the services account to this domain user who has the corresponding to the
data source DB.
If this is not what you want, pelase post the detail information about the error, so that we can make further analysis.
Regards,
Charlie Liao
TechNet Community Support
Similar Messages
-
Report to Show All Machines with ANY Deployment Failures
I need to generate a report, daily, that displays all machines that have
any kind of an deployment failure. This list will then be used to generate tickets for consultants in that area to check on them.
I know I can look at specific deployments and see which machines show up as failed, but I am not seeing a report that shows all machines that have
any kind of a failed deployment. Does one exist, or will I need to create it?you can try this report to list all failed deployments(only for applications but not packages).
select
all
SMS_AppDeploymentAssetDetails.AppName as 'App Name',
CASE WHEN SMS_AppDeploymentAssetDetails.AppStatusType = '1' Then 'Success'
when SMS_AppDeploymentAssetDetails.AppStatusType = '2' Then 'In Progress'
when SMS_AppDeploymentAssetDetails.AppStatusType = '3' Then 'Requirements Not Met'
when SMS_AppDeploymentAssetDetails.AppStatusType = '4' Then 'Unknown'
when SMS_AppDeploymentAssetDetails.AppStatusType = '5' Then 'Error'
else 'Unknown'
End as 'App Status Type',
CASE WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '1' Then 'Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '2' Then 'Non-Compliant'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '4' Then 'Error'
WHEN SMS_AppDeploymentAssetDetails.ComplianceState = '6' Then 'Partial Compliance'
else 'Unknown'
End as 'Compliance State',
CASE WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '1' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '2' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.DeploymentIntent = '3' Then 'Preflight'
else 'Unknown'
End as 'Deployment Intent',
SMS_AppDeploymentAssetDetails.DTName as 'Deplyoment Type Name',
CASE WHEN SMS_AppDeploymentAssetDetails.InstalledState = '1' Then 'Uninstall'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '2' Then 'Install'
WHEN SMS_AppDeploymentAssetDetails.InstalledState = '3' Then 'Unknown'
else 'Unknown'
End as 'Installed State',
CASE WHEN SMS_AppDeploymentAssetDetails.IsMachineAssignedToUser = '1' Then 'Yes'
Else 'No'
End as 'Device Assigned to User?',
SMS_AppDeploymentAssetDetails.MachineName as 'Device Name',
CASE WHEN CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)>0 THEN SUBSTRING
(SMS_AppDeploymentAssetDetails.UserName,CHARINDEX('\',SMS_AppDeploymentAssetDetails.UserName)+1,255)
ELSE SMS_AppDeploymentAssetDetails.UserName END 'User Name'
from fn_AppDeploymentAssetDetails(1033) AS SMS_AppDeploymentAssetDetails
where SMS_AppDeploymentAssetDetails.AppStatusType = '5'
ORDER BY 1
Original query posted on http://systemcenteradmin.com/?p=67
Eswar Koneti | Configmgr blog:
www.eskonr.com | Linkedin: Eswar Koneti
| Twitter: Eskonr -
How to create a ROLAP Cube that has two fact tables.
I want to know if it is possible to create a ROLAP Cube with two fact tables.
Suppose that I have these two star schemas:
The first star schema has only a measure and a time dimension. The time dimension has three levels (Year -> Month -> Day)
The second star schema has the same measure of the first schema and a time dimension. In this schema the time dimension has only two levels (Year -> Month). The values of the measure of this schema come from the first schema, this is, the value of the measure for a defined year and month results of the sum of all fact values of the first schema, that have the same year and month.
I want to know if is possible to create a ROLAP cube that can get the information of the two star schemas, according to the level that the user are consulting.
For example, if the user consults the cube with "OracleBI Spreadsheet Add-In", and if the user is consulting the first two levels (Year and Month), then the ROLAP cube would get the information of the second star schema.
But if the user does a drill down in a month to get information of the days, then the ROLAP cube would get the information of the first star schema.
Is it possible to do this?
Regards,
Rui TorresI'm not exactly sure what you want to do. Sorry if I get this wrong.
You have two fact tables, one with data values at the day, month and year levels and a second fact table with data values at just the month and year levels. If this is the case, in the CWM2 APIs or OWB Paris, you would create a view that joins the two tables together and then map this view to the ROLAP cube.
For CWM2 details, please refer to the Oracle OLAP Reference. -
Casual "more than 4,294,967,296 tuples" errors upon query to ROLAP cube
With SSAS 2008R2 SP2 CU12 I observe the behavior that looks weird to me and I'd be very thankful for explanation or help with this problem as long as this issue is experienced by our customer and it has critical status now. Fortunately, I was able to reproduce
this in lab environment, so I've pretty much details.
I have an independent process that constantly adds facts and members to relational tables that are used in ROLAP cube and dimensions.
I have MDX query like this:
SELECT
NON EMPTY
{[Measures].[MyPhysicalMeasure1]} ON COLUMNS
,NON EMPTY
[MyDim1].[MyDim1].[MyDim1].ALLMEMBERS*
[MyDim2].[MyDim2].[MyDim2].ALLMEMBERS*
[MyDim3].[MyDim3].[MyDim3].ALLMEMBERS*
[MyDim4].[MyDim4].[MyDim4].ALLMEMBERS*
[MyCalendarDim5].[MyCalendarDim5].[Minute].ALLMEMBERS*
[MyDim6].[MyDim6].[MyDim6].ALLMEMBERS*
[MyDim7].[MyDim7].[MyDim7].ALLMEMBERS*
[MyDim8].[MyDim8].[MyDim8].ALLMEMBERS*
[MyDim9].[MyDim9].[MyDim9].ALLMEMBERS*
[MyDim10].[MyDim10].[MyDim10].ALLMEMBERS*
[MyDim11].[MyDim11].[MyDim11].ALLMEMBERS
DIMENSION PROPERTIES
MEMBER_CAPTION
,MEMBER_UNIQUE_NAME
ON ROWS
FROM
SELECT
[MyCalendarDimNamedSet_12Months] ON COLUMNS
FROM
SELECT
StrToSet
("[MyDim12].[MyDim12].&[MyMember1].&[MyMember11]"
,CONSTRAINED
) ON COLUMNS
FROM [MyROLAPCube1]
CELL PROPERTIES
VALUE
,BACK_COLOR
,FORE_COLOR
,FORMATTED_VALUE
,FORMAT_STRING
,FONT_NAME
,FONT_SIZE
,FONT_FLAGS;
So, here is scenario:
1) If I run this query for a 1st time I'm getting the error:
"The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples."
2) If I keep the process that adds facts and members running I'm constantly getting the same error on attempt to execute MDX:
"The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples."
3) If I stop the process that adds facts and members and wait for few seconds, the query will be successfully executed!
4) If I keep the process that adds facts and members stopped, the query will be successfully executed at any time.
5) If I keep the process that adds facts and members stopped, reconnect client, the query will be successfully executed at any time.
6) If I keep the process that adds facts and members stopped, restart SSAS and reconnect client, the query will be successfully executed at any time.
7) If I resume the process that adds facts and members, wait for few seconds, the query will fail with the same error:
"The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples."
I have already tried replacing the NON EMPTY with NonEmpty function, as some articles suggest - no luck, results will be the same.
I'd be very thankful for explanation or any help with this problem!
Thanks!Hi Andrei,
The error “The expression contains a function that cannot operate on a set with more than 4,294,967,296 tuples” was described on the link
http://support.microsoft.com/kb/2430162
And it said that it was fixed in the Cumulative update package 2 for SQL Server 2008 Service Pack 2, however, you have applied CU 12 in your environment and still can reproduce this error. So I am afraid this issue can occurs on some particular condition.
So I recommend you submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is released in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
We appreciate your comprehension.
Regards,
Charlie Liao
TechNet Community Support -
Solaris Deployment Failure for cannot resolve symbol on PersistentContainer
Hello, I'm having trouble diagnosing the following deployment failure.
What are some common causes of this? My server was created using an
Express Integration domain with some custom JMS destinations added
afterwards via the console. I am deploying an application built with
Workshop (straight from workshop). I copied over an application from
Windows to Solaris, deleted the .workshop directory and .beabuild.txt
and rebuilt the application to deploy.
I get this error a few times.
####<Aug 21, 2003 10:48:19 AM EDT> <Info> <EJB> <rhino> <cgServer>
<ExecuteThread: '1' for queue: 'weblogic.kernel.System'> <<WLS Kernel>>
<> <BEA-012033> <Compiling generated EJB classes produced the following
Java compiler output:
/export/data/ident/bea/user_projects/domains/ident1Server.conf/./cgServer/.wlnotdelete/EJBCompilerCache/-7dxi2hv35mro/com/bea/wlwgen/PersistentContainer_3fq3ar_Impl.java:143:
cannot resolve symbol
symbol : class BMPContainerBean$DuplicateKeyRemoteException
location: package bean
perchance you meant 'BMPContainerBean.DuplicateKeyRemoteException'
throws
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
^
1 error
This then causes other errors repeating that the deployment failed (let
me know if you need more to diagnose this):
Exception:weblogic.management.ApplicationException: prepare failed for
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv
Module: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv Error:
Exception preparing module:
EJBModule(.workshop/myApp/EJB/myProc_1trtqtoxcz4uv,status=NEW)
Unable to deploy EJB: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv from
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv:
Compiler failed executable.execBut by default WLS8.1 comes with jdk141_02 ...correct ?
AND what i understand is that...the bug you posted is related to a bug in jdk1.4.2
....correct ??
correct me if i wrong.
-sangita
Steven Ostrowski <[email protected]> wrote:
It looks like this is a bug in the BEA-generated code that is then
compiled by WLS. The generated code was using the Class1$Class2 notation
to reference the class, but since $ is a valid character in the class
name, this does not behave as intended. This used to be a bug in
pre-1.4.2 but is now fixed in 1.4.2 (look at bug 4635044, and this is
also mentioned in the 1.4.2 release notes and the Java Developer forums).
The generated code should be:
com.bea.wlw.runtime.core.bean.BMPContainerBean.DuplicateKeyRemoteException
not
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
Thanks again for the good response. I'll send this in to BEA support.
Steven Ostrowski wrote:
One other thing to add, this was fixed by changing the JAVA_HOME
variable inside of the startWeblogic.sh script. Setting it in workshop
did not change anything.
Steven Ostrowski wrote:
Wow, you hit it right on target! I was using 1.4.2 then tried it on
1.4.1_03 and it deployed fine.
Is this a bug in BEA or in the JDK? In either case, where should I
report this bug?
Thanks again
Rob Woollen wrote:
What version of the JDK are you using? I believe they changed the
inner class naming conventions in 1.4.2, and it's breaking lots of
people.
-- Rob
Steven Ostrowski wrote:
Hello, I'm having trouble diagnosing the following deployment
failure. What are some common causes of this? My server was created
using an Express Integration domain with some custom JMS
destinations added afterwards via the console. I am deploying an
application built with Workshop (straight from workshop). I copied
over an application from Windows to Solaris, deleted the .workshop
directory and .beabuild.txt and rebuilt the application to deploy.
I get this error a few times.
####<Aug 21, 2003 10:48:19 AM EDT> <Info> <EJB> <rhino> <cgServer>
<ExecuteThread: '1' for queue: 'weblogic.kernel.System'> <<WLS
Kernel>> <> <BEA-012033> <Compiling generated EJB classes produced
the following Java compiler output:
/export/data/ident/bea/user_projects/domains/ident1Server.conf/./cgServer/.wlnotdelete/EJBCompilerCache/-7dxi2hv35mro/com/bea/wlwgen/PersistentContainer_3fq3ar_Impl.java:143:
cannot resolve symbol
symbol : class BMPContainerBean$DuplicateKeyRemoteException
location: package bean
perchance you meant 'BMPContainerBean.DuplicateKeyRemoteException'
throws
com.bea.wlw.runtime.core.bean.BMPContainerBean$DuplicateKeyRemoteException
^
1 error
This then causes other errors repeating that the deployment failed
(let me know if you need more to diagnose this):
Exception:weblogic.management.ApplicationException: prepare failed
for .workshop/myApp/EJB/myProc_1trtqtoxcz4uv
Module: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv Error:
Exception preparing module:
EJBModule(.workshop/myApp/EJB/myProc_1trtqtoxcz4uv,status=NEW)
Unable to deploy EJB: .workshop/myApp/EJB/myProc_1trtqtoxcz4uv from
.workshop/myApp/EJB/myProc_1trtqtoxcz4uv:
Compiler failed executable.exec -
Patch 2529822, bp 4 Tabular Cube Aggregation
Hi,
According to the bibeans installation doc,
I need these patches from metalink:
2632931 -- The Oracle9i 9.2.0.2 patch set. Choose the appropriate
platform, then download and install the patch set.
2529822 -- Best Practices for Tabular Cube Aggregation and Query
Operations. When you configure the database, you must follow these
configuration settings to ensure good performance of BI Beans.
But...
metalink tells me that 2529822 is not a valid patch.
And...
A general metalink search on 2529822 reveals this:
BI Beans Connection Problem:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=FOR&p_id=483349.995
BI Beans Connection Problem:
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=FOR&p_id=483350.995
But...
both of the above links are dead ends.
They say...
This is a forum thread. The owner of this thread has chosen not to publish the contents.
Should I try to track down: "Best Practices for Tabular Cube Aggregation and Query Operations" ?
Or is it a waste of time?
-atmFirst I would recommend upgrading to database version 9.2.0.4.1 and upgrading to the latest version of BI Beans. The database patch is a two stage patch:
Patch Description
- 3095277 : 9.2.0.4 PATCH SET FOR ORACLE DATABASE SERVER
- 3084634 : 9.2.0.4 ONE-OFF PATCH AND 9.2.0.4.1 SERVER PATCH
If you goto Metalink.oracle.com and type 'Best Practices for Tabular Cube Aggregation and Query Operations' you will see the document listed in the returned results. I would recommend right-mouse click and 'Save Target As' to download the pdf file as clicking on the link does not seem to work very well with my browser.
alternatively try following this link:
http://metalink.oracle.com/cgi-bin/cr/getfile.cgi?p_attid=155514.1:284497
Hope this helps
BI Beans Product Management Team
Oracle Corporation -
Standalone WLS server instance deployment failure - missing ADFLogger
I was hoping somebody could help me please with issues of installing ADF JDev 11g apps to separate WLS server instances (ie. not Admin Server) and the ADFLogger class.
I've successfully configured a separate standalone WLS, installed the ADF Runtime Libraries and deployed/run an ADF JDev 11g app to the server under the default AdminServer.
We encountered one issue with deployment regarding the ADFApplicationLifecycleListener class which is addessed in the following forum post with the documented workaround of removing ADFApplicationLifecycleListener from the weblogic-application.xml file: Standalone WLS deployment failure - incorrect weblogic-application.xml
Next we want to deploy to a separate server instance/machine on the standalone WLS (we have the eventual requirement of deploying our apps to a WLS cluster, so we're experimenting with configuring separate WLS server instances+machines).
I've created via the Admin Server a new separate server instance (say ADFServer) on a separate WLS machine (say ADFMachine) within my standalone WLS. I've configured the separate WLS server instance to run on a different port from the default Admin Server port. In addition for the 3 deployed libraries jsf, jstl and oracle.adf.domain, via selecting them in the Admin Console under Deployments, then the Target tab, I've also "targetted" (read: deployed) these 3 libraries to the new server instance so they reside both on the Admin Server and ADFServer.
However when I redeploy my original application via JDeveloper's Application Menu -> Deploy option, on deployment to the ADFServer directly I receive the exception at the bottom of this post. The relevant error message:
java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger
This class is included in numerous ADF Runtime Libraries, and I would expect that once I targetted the oracle.adf.domain library for both Admin Server and ADFServer, the relevant ADFLogger class should be available (and given the fact I've run the application successfully on the standalone WLS under the Admin Server, it proves the library is available).
The missing ADFLogger library seems to be a reoccuring theme for application server deployments, in particular OC4J. This is the first time I've seen it broached for WLS when using the ADF Runtime Libraries and haven't found much assistance via the OTN forums, Google searches etc.
Does anybody know what I've configured incorrectly on my standalone WLS such that the ADFLogger is not configured for the separate WLS server instance? (I suspect I'll have to try the WLS forum too, but lets start here).
Any help appreciated.
Thanks & regards,
CM.
(Complete stack trace)
Failure occurred in the execution of deployment request with ID '1229647798124' for task '2'. Error is: 'java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger' java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger at java.lang.Class.getDeclaredFields0(Native Method) at java.lang.Class.privateGetDeclaredFields(Class.java:2291) at java.lang.Class.getDeclaredFields(Class.java:1743) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:965) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:958) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.processJ2eeAnnotations(BaseJ2eeAnnotationProcessor.java:97) at weblogic.j2ee.dd.xml.J2eeAnnotationProcessor.processJ2eeAnnotations(J2eeAnnotationProcessor.java:37) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processFilters(WebAnnotationProcessorImpl.java:241) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:212) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:388) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:44) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:616) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:725) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173) java.lang.NoClassDefFoundError: oracle/adf/share/logging/ADFLogger at java.lang.Class.getDeclaredFields0(Native Method) at java.lang.Class.privateGetDeclaredFields(Class.java:2291) at java.lang.Class.getDeclaredFields(Class.java:1743) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:965) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.getFields(BaseJ2eeAnnotationProcessor.java:958) at weblogic.j2ee.dd.xml.BaseJ2eeAnnotationProcessor.processJ2eeAnnotations(BaseJ2eeAnnotationProcessor.java:97) at weblogic.j2ee.dd.xml.J2eeAnnotationProcessor.processJ2eeAnnotations(J2eeAnnotationProcessor.java:37) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processFilters(WebAnnotationProcessorImpl.java:241) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processJ2eeAnnotations(WebAnnotationProcessorImpl.java:212) at weblogic.servlet.internal.WebAnnotationProcessorImpl.processAnnotations(WebAnnotationProcessorImpl.java:107) at weblogic.servlet.internal.WebAppServletContext.processAnnotations(WebAppServletContext.java:1287) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:412) at weblogic.servlet.internal.WebAppServletContext.<init>(WebAppServletContext.java:456) at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:414) at weblogic.servlet.internal.WebAppModule.registerWebApp(WebAppModule.java:910) at weblogic.servlet.internal.WebAppModule.prepare(WebAppModule.java:364) at weblogic.application.internal.flow.ScopedModuleDriver.prepare(ScopedModuleDriver.java:180) at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93) at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:388) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:58) at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:44) at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:616) at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37) at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191) at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:16) at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:155) at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:198) at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:89) at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217) at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:725) at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1190) at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:248) at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:157) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:12) at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46) at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:516) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)I do start it by commandline since I only have the AdminServer, and no other nodes. Below is my startWeblogic.sh and setDomainEnv.sh scripts under medrec/bin directory. I don't see any modifications to them for ADF. Also, after extending the domain, the oracle.adf.domain library shows up in my deployments page and is pointing to "/ u01/ app/ oracle/ product/ wls/ jdeveloper/ modules/ oracle. adf. model_11. 1. 1/ adf. oracle. domain. ear". It seems like the extending step is missing a step to give access to all the libraries?
STARTWEBLOGIC.SH:
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
stopAll()
# We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services
if [ "X${ALREADY_STOPPED}" != "X" ] ; then
exit
fi
# STOP POINTBASE (only if we started it)
if [ "${POINTBASE_FLAG}" = "true" ] ; then
echo "Stopping PointBase server..."
${WL_HOME}/common/bin/stopPointBase.sh -port=${POINTBASE_PORT} -name=${POINTBASE_DBNAME} >"${DOMAIN_HOME}/pointbaseShutdown.log" 2>&1
echo "PointBase server stopped."
fi
ALREADY_STOPPED="true"
# Restore IP configuration the node manager starts IP Migration
if [ "${SERVER_IP}" != "" ] ; then
${WL_HOME}/common/bin/wlsifconfig.sh -removeif "${IFNAME}" "${SERVER_IP}"
fi
# --- End Functions ---
# This script is used to start WebLogic Server for this domain.
# To create your own start script for your domain, you can initialize the
# environment by calling @USERDOMAINHOME/setDomainEnv.
# setDomainEnv initializes or calls commEnv to initialize the following variables:
# BEA_HOME - The BEA home directory of your WebLogic installation.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server.
# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)
# PATH - JDK and WebLogic directories are added to system path.
# WEBLOGIC_CLASSPATH
# - Classpath needed to start WebLogic Server.
# PATCH_CLASSPATH - Classpath used for patches
# PATCH_LIBPATH - Library path used for patches
# PATCH_PATH - Path used for patches
# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch
# JAVA_VM - The java arg specifying the VM to run. (i.e.
# - server, -hotspot, etc.)
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# POINTBASE_HOME - Point Base home directory.
# POINTBASE_CLASSPATH
# - Classpath needed to start PointBase.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
# Call setDomainEnv here.
DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
. ${DOMAIN_HOME}/bin/setDomainEnv.sh $*
SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"
SAVE_CLASSPATH="${CLASSPATH}"
# Start PointBase
PB_DEBUG_LEVEL="3"
if [ "${POINTBASE_FLAG}" = "true" ] ; then
${WL_HOME}/common/bin/startPointBase.sh -port=${POINTBASE_PORT} -debug=${PB_DEBUG_LEVEL} -console=false -background=true -ini=${DOMAIN_HOME}/pointbase.ini >"${DOMAIN_HOME}/pointbase.log" 2>&1
fi
JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"
SAVE_JAVA_OPTIONS=""
CLASSPATH="${SAVE_CLASSPATH}"
SAVE_CLASSPATH=""
trap 'stopAll' 1 2 3 15
if [ "${PRODUCTION_MODE}" = "true" ] ; then
WLS_DISPLAY_MODE="Production"
else
WLS_DISPLAY_MODE="Development"
fi
if [ "${WLS_USER}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"
fi
if [ "${WLS_PW}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"
fi
CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"
echo "."
echo "."
echo "JAVA Memory arguments: ${MEM_ARGS}"
echo "."
echo "WLS Start Mode=${WLS_DISPLAY_MODE}"
echo "."
echo "CLASSPATH=${CLASSPATH}"
echo "."
echo "PATH=${PATH}"
echo "."
echo "***************************************************"
echo "* To start WebLogic Server, use a username and *"
echo "* password assigned to an admin-level user. For *"
echo "* server administration, use the WebLogic Server *"
echo "* console at http://hostname:port/console *"
echo "***************************************************"
# Set up IP Migration related variables.
# Set interface name.
if [ "${Interface}" != "" ] ; then
IFNAME="${Interface}"
else
IFNAME=""
fi
# Set IP Mask.
if [ "${NetMask}" != "" ] ; then
IPMASK="${NetMask}"
else
IPMASK=""
fi
# Perform IP Migration if SERVER_IP is set by node manager.
if [ "${SERVER_IP}" != "" ] ; then
${WL_HOME}/common/bin/wlsifconfig.sh -addif "${IFNAME}" "${SERVER_IP}" "${IPMASK}"
fi
# START WEBLOGIC
echo "starting weblogic with Java version:"
${JAVA_HOME}/bin/java ${JAVA_VM} -version
if [ "${WLS_REDIRECT_LOG}" = "" ] ; then
echo "Starting WLS with line:"
echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}
else
echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"
${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1
fi
stopAll
popd
# Exit this script only if we have been told to exit.
if [ "${doExitFlag}" = "true" ] ; then
exit
fi
SETDOMAINENV.SH:
#!/bin/sh
# WARNING: This file is created by the Configuration Wizard.
# Any changes to this script may be lost when adding extensions to this configuration.
# --- Start Functions ---
BP=100
SP=$BP
pushd()
if [ -z "$1" ]
then
return
fi
SP=`expr $SP - 1`
eval _stack$SP=`pwd`
cd $1
return
popd()
if [ $SP -eq $BP ]
then
return
fi
eval cd \${_stack$SP}
SP=`expr $SP + 1`
return
# --- End Functions ---
# This script is used to setup the needed environment to be able to start Weblogic Server in this domain.
# This script initializes the following variables before calling commEnv to set other variables:
# WL_HOME - The BEA home directory of your WebLogic installation.
# JAVA_VM - The desired Java VM to use. You can set this environment variable before calling
# this script to switch between Sun or BEA or just have the default be set.
# JAVA_HOME - Location of the version of Java used to start WebLogic
# Server. Depends directly on which JAVA_VM value is set by default or by the environment.
# USER_MEM_ARGS - The variable to override the standard memory arguments
# passed to java.
# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.
# DOMAIN_PRODUCTION_MODE
# - The variable that determines whether the workshop related settings like the debugger,
# testconsole or iterativedev should be enabled. ONLY settable using the
# command-line parameter named production
# NOTE: Specifying the production command-line param will force
# the server to start in production mode.
# Other variables used in this script include:
# SERVER_NAME - Name of the weblogic server.
# JAVA_OPTIONS - Java command-line options for running the server. (These
# will be tagged on to the end of the JAVA_VM and
# MEM_ARGS)
# For additional information, refer to the WebLogic Server Administration
# Console Online Help(http://e-docs.bea.com/wls/docs103/ConsoleHelp/startstop.html).
ORACLE_HOME="/u01/app/oracle/product/wls/jdeveloper"
export ORACLE_HOME
WL_HOME="/u01/app/oracle/product/wls/wlserver_10.3"
export WL_HOME
BEA_JAVA_HOME="/u01/app/oracle/product/wls/jrockit_160_05"
export BEA_JAVA_HOME
SUN_JAVA_HOME="/u01/app/oracle/product/wls/jdk160_05"
export SUN_JAVA_HOME
if [ "${JAVA_VENDOR}" = "BEA" ] ; then
JAVA_HOME="${BEA_JAVA_HOME}"
export JAVA_HOME
else
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
JAVA_HOME="${SUN_JAVA_HOME}"
export JAVA_HOME
else
JAVA_VENDOR="BEA"
export JAVA_VENDOR
JAVA_HOME="/u01/app/oracle/product/wls/jrockit_160_05"
export JAVA_HOME
fi
fi
# We need to reset the value of JAVA_HOME to get it shortened AND
# we can not shorten it above because immediate variable expansion will blank it
JAVA_HOME="${JAVA_HOME}"
export JAVA_HOME
SAMPLES_HOME="${WL_HOME}/samples"
export SAMPLES_HOME
DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
export DOMAIN_HOME
LONG_DOMAIN_HOME="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec"
export LONG_DOMAIN_HOME
if [ "${DEBUG_PORT}" = "" ] ; then
DEBUG_PORT="8453"
export DEBUG_PORT
fi
if [ "${SERVER_NAME}" = "" ] ; then
SERVER_NAME="MedRecServer"
export SERVER_NAME
fi
POINTBASE_FLAG="true"
export POINTBASE_FLAG
POINTBASE_PORT="9082"
export POINTBASE_PORT
POINTBASE_DBNAME="medrec"
export POINTBASE_DBNAME
enableHotswapFlag=""
export enableHotswapFlag
PRODUCTION_MODE=""
export PRODUCTION_MODE
doExitFlag="false"
export doExitFlag
verboseLoggingFlag="false"
export verboseLoggingFlag
while [ $# -gt 0 ]
do
case $1 in
nodebug)
debugFlag="false"
export debugFlag
production)
DOMAIN_PRODUCTION_MODE="true"
export DOMAIN_PRODUCTION_MODE
notestconsole)
testConsoleFlag="false"
export testConsoleFlag
noiterativedev)
iterativeDevFlag="false"
export iterativeDevFlag
noLogErrorsToConsole)
logErrorsToConsoleFlag="false"
export logErrorsToConsoleFlag
nopointbase)
POINTBASE_FLAG="false"
export POINTBASE_FLAG
doExit)
doExitFlag="true"
export doExitFlag
noExit)
doExitFlag="false"
export doExitFlag
verbose)
verboseLoggingFlag="true"
export verboseLoggingFlag
enableHotswap)
enableHotswapFlag="-javaagent:${WL_HOME}/server/lib/diagnostics-agent.jar"
export enableHotswapFlag
PROXY_SETTINGS="${PROXY_SETTINGS} $1"
export PROXY_SETTINGS
esac
shift
done
MEM_DEV_ARGS=""
export MEM_DEV_ARGS
if [ "${DOMAIN_PRODUCTION_MODE}" = "true" ] ; then
PRODUCTION_MODE="${DOMAIN_PRODUCTION_MODE}"
export PRODUCTION_MODE
fi
if [ "${PRODUCTION_MODE}" = "true" ] ; then
debugFlag="false"
export debugFlag
testConsoleFlag="false"
export testConsoleFlag
iterativeDevFlag="false"
export iterativeDevFlag
fi
# If you want to override the default Patch Classpath, Library Path and Path for this domain,
# Please uncomment the following lines and add a valid value for the environment variables
# set PATCH_CLASSPATH=[myPatchClasspath] (windows)
# set PATCH_LIBPATH=[myPatchLibpath] (windows)
# set PATCH_PATH=[myPatchPath] (windows)
# PATCH_CLASSPATH=[myPatchClasspath] (unix)
# PATCH_LIBPATH=[myPatchLibpath] (unix)
# PATCH_PATH=[myPatchPath] (unix)
. ${WL_HOME}/common/bin/commEnv.sh
WLS_HOME="${WL_HOME}/server"
export WLS_HOME
MEM_ARGS="-Xms256m -Xmx512m"
export MEM_ARGS
MEM_PERM_SIZE="-XX:PermSize=48m"
export MEM_PERM_SIZE
MEM_MAX_PERM_SIZE="-XX:MaxPermSize=128m"
export MEM_MAX_PERM_SIZE
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
if [ "${PRODUCTION_MODE}" = "" ] ; then
MEM_DEV_ARGS="-XX:CompileThreshold=8000 ${MEM_PERM_SIZE} "
export MEM_DEV_ARGS
fi
fi
# Had to have a separate test here BECAUSE of immediate variable expansion on windows
if [ "${JAVA_VENDOR}" = "Sun" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_DEV_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
if [ "${JAVA_VENDOR}" = "HP" ] ; then
MEM_ARGS="${MEM_ARGS} ${MEM_MAX_PERM_SIZE}"
export MEM_ARGS
fi
# IF USER_MEM_ARGS the environment variable is set, use it to override ALL MEM_ARGS values
if [ "${USER_MEM_ARGS}" != "" ] ; then
MEM_ARGS="${USER_MEM_ARGS}"
export MEM_ARGS
fi
JAVA_PROPERTIES="-Dplatform.home=${WL_HOME} -Dwls.home=${WLS_HOME} -Dweblogic.home=${WLS_HOME} "
export JAVA_PROPERTIES
# To use Java Authorization Contract for Containers (JACC) in this domain,
# please uncomment the following section. If there are multiple machines in
# your domain, be sure to edit the setDomainEnv in the associated domain on
# each machine.
# -Djava.security.manager
# -Djava.security.policy=location of weblogic.policy
# -Djavax.security.jacc.policy.provider=weblogic.security.jacc.simpleprovider.SimpleJACCPolicy
# -Djavax.security.jacc.PolicyConfigurationFactory.provider=weblogic.security.jacc.simpleprovider.PolicyConfigurationFactoryImpl
# -Dweblogic.security.jacc.RoleMapperFactory.provider=weblogic.security.jacc.simpleprovider.RoleMapperFactoryImpl
EXTRA_JAVA_PROPERTIES="-Ddomain.home=${DOMAIN_HOME} -Doracle.home=${ORACLE_HOME} -Doracle.security.jps.config=${DOMAIN_HOME}/config/oracle/jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol ${EXTRA_JAVA_PROPERTIES}"
export EXTRA_JAVA_PROPERTIES
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${EXTRA_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
ARDIR="${WL_HOME}/server/lib"
export ARDIR
pushd ${LONG_DOMAIN_HOME}
# Clustering support (edit for your cluster!)
if [ "${ADMIN_URL}" = "" ] ; then
# The then part of this block is telling us we are either starting an admin server OR we are non-clustered
CLUSTER_PROPERTIES="-Dweblogic.management.discover=true"
export CLUSTER_PROPERTIES
else
CLUSTER_PROPERTIES="-Dweblogic.management.discover=false -Dweblogic.management.server=${ADMIN_URL}"
export CLUSTER_PROPERTIES
fi
LOG4J_CONFIG_FILE="/u01/app/oracle/product/wls/wlserver_10.3/samples/domains/medrec/log4j.properties"
export LOG4J_CONFIG_FILE
if [ "${LOG4J_CONFIG_FILE}" != "" ] ; then
JAVA_PROPERTIES="${JAVA_PROPERTIES} -Dlog4j.configuration=file:${LOG4J_CONFIG_FILE}"
export JAVA_PROPERTIES
fi
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${CLUSTER_PROPERTIES}"
export JAVA_PROPERTIES
# Clear the pre_classpath here in case an application template wants to set it before the larger pre_classpath is invoked below
PRE_CLASSPATH=""
export PRE_CLASSPATH
PRE_CLASSPATH=""
export PRE_CLASSPATH
JAVA_DEBUG=""
export JAVA_DEBUG
if [ "${debugFlag}" = "true" ] ; then
JAVA_DEBUG="-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=${DEBUG_PORT},server=y,suspend=n -Djava.compiler=NONE"
export JAVA_DEBUG
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole..."
export JAVA_OPTIONS
else
JAVA_OPTIONS="${JAVA_OPTIONS} ${enableHotswapFlag} -da"
export JAVA_OPTIONS
fi
if [ ! -d ${JAVA_HOME}/lib ] ; then
echo "The JRE was not found in directory ${JAVA_HOME}. (JAVA_HOME)"
echo "Please edit your environment and set the JAVA_HOME"
echo "variable to point to the root directory of your Java installation."
popd
read _val
exit
fi
if [ "${POINTBASE_FLAG}" = "true" ] ; then
DATABASE_CLASSPATH="${POINTBASE_CLASSPATH}"
export DATABASE_CLASSPATH
else
DATABASE_CLASSPATH="${POINTBASE_CLIENT_CLASSPATH}"
export DATABASE_CLASSPATH
fi
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${ORACLE_HOME}/modules/features/adf.share_11.1.1.jar${CLASSPATHSEP}${POST_CLASSPATH}"
export POST_CLASSPATH
POST_CLASSPATH=""
export POST_CLASSPATH
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${DATABASE_CLASSPATH}${CLASSPATHSEP}${ARDIR}/xqrl.jar"
export POST_CLASSPATH
# PROFILING SUPPORT
JAVA_PROFILE=""
export JAVA_PROFILE
SERVER_CLASS="weblogic.Server"
export SERVER_CLASS
JAVA_PROPERTIES="${JAVA_PROPERTIES} ${WLP_JAVA_PROPERTIES}"
export JAVA_PROPERTIES
JAVA_OPTIONS="${JAVA_OPTIONS} ${JAVA_PROPERTIES} -Dwlw.iterativeDev=${iterativeDevFlag} -Dwlw.testConsole=${testConsoleFlag} -Dwlw.logErrorsToConsole=${logErrorsToConsoleFlag}"
export JAVA_OPTIONS
# -- Setup properties so that we can save stdout and stderr to files
if [ "${WLS_STDOUT_LOG}" != "" ] ; then
echo "Logging WLS stdout to ${WLS_STDOUT_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stdout=${WLS_STDOUT_LOG}"
export JAVA_OPTIONS
fi
if [ "${WLS_STDERR_LOG}" != "" ] ; then
echo "Logging WLS stderr to ${WLS_STDERR_LOG}"
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.Stderr=${WLS_STDERR_LOG}"
export JAVA_OPTIONS
fi
# ADD EXTENSIONS TO CLASSPATHS
if [ "${EXT_PRE_CLASSPATH}" != "" ] ; then
PRE_CLASSPATH="${EXT_PRE_CLASSPATH}${CLASSPATHSEP}${PRE_CLASSPATH}"
export PRE_CLASSPATH
fi
if [ "${EXT_POST_CLASSPATH}" != "" ] ; then
POST_CLASSPATH="${POST_CLASSPATH}${CLASSPATHSEP}${EXT_POST_CLASSPATH}"
export POST_CLASSPATH
fi
if [ "${WEBLOGIC_EXTENSION_DIRS}" != "" ] ; then
JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.ext.dirs=${WEBLOGIC_EXTENSION_DIRS}"
export JAVA_OPTIONS
fi
JAVA_OPTIONS="${JAVA_OPTIONS}"
export JAVA_OPTIONS
# SET THE CLASSPATH
CLASSPATH="${PRE_CLASSPATH}${CLASSPATHSEP}${WEBLOGIC_CLASSPATH}${CLASSPATHSEP}${POST_CLASSPATH}${CLASSPATHSEP}${WLP_POST_CLASSPATH}"
export CLASSPATH
JAVA_VM="${JAVA_VM} ${JAVA_DEBUG} ${JAVA_PROFILE}"
export JAVA_VM -
OSD deployment failure - smstslog attached
I'm pretty new to SCCM and having issues with a OSD deployment. Current image works fine but have been asked to import some drivers so we can deploy to another model. Model is HP Z200. I have uploaded the drivers into sccm (previously tested
them on the system manually to make sure they work), created a new driver package, setup a wmi query that looks for the model name in the task sequence and then deploys drivers. However the OSD deployment is failing, see log below can anyone help please?
smstslog:
Executing task sequence
OSDSetupHook 09/03/2015 09:21:57
904 (0x0388)
Loading the Task Sequencing Environment from "C:\_SMSTaskSequence\TSEnv.dat".
OSDSetupHook 09/03/2015 09:21:57
904 (0x0388)
Environment scope successfully created: Global\{51A016B6-F0DE-4752-B97C-54E6F386A912}
OSDSetupHook
09/03/2015 09:21:57
904 (0x0388)
Environment scope successfully created: Global\{BA3A3900-CA6D-4ac1-8C28-5073AFC22B03}
OSDSetupHook
09/03/2015 09:21:57
904 (0x0388)
Debug shell is enabled OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Successfully enabled debug command shell support.
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Configuring local administrator account OSDSetupHook
09/03/2015 09:22:03 904 (0x0388)
Re-assign all drive letters...
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
The drive information which has no drive letter can not be found. No need to re-assign driver letters.
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Installing SMS client OSDSetupHook
09/03/2015 09:22:03
904 (0x0388)
Client already installed. OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Moving logs to SMS client directory
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Successfully moved logs to SMS client log directory: C:\WINDOWS\CCM\Logs\SMSTSLog
OSDSetupHook
09/03/2015 09:22:03
904 (0x0388)
Executing task sequence manager bootstrap
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
Executing command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:2
OSDSetupHook 09/03/2015 09:22:03
904 (0x0388)
==============================[ TSMBootStrap.exe ]==============================
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Command line: "C:\WINDOWS\CCM\TSMBootstrap.exe" /env:Gina /configpath:C:\_SMSTaskSequence /bootcount:2
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Current OS version is 6.1.7601.1 TSMBootstrap
09/03/2015 09:22:04 1012 (0x03F4)
Logging successfully initialized. TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
Resuming Task Sequence in Full OS
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
We are going in GINA and potentially need to set the authenticator
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
setting the authenticator
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Executing command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
==========[ TsProgressUI started in process 1260 ]==========
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Command line: "C:\WINDOWS\CCM\TsProgressUI.exe" /Register:WinPE
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Registering COM classes
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
sbModulePath = C:\WINDOWS\CCM\TsProgressUI.exe
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Unregistering class objects
TsProgressUI 09/03/2015 09:22:04
1452 (0x05AC)
Shutdown complete. TsProgressUI
09/03/2015 09:22:04
1452 (0x05AC)
Process completed with exit code 0
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Successfully registered TS Progress UI. TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
No valid network adapter found.
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Starting Task Sequence Manager.
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
executing TS Manager not in full media TSMBootstrap
09/03/2015 09:22:04
1012 (0x03F4)
executing TS Manager in c:\windows\ccm
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Executing command line: "TsManager.exe"
TSMBootstrap 09/03/2015 09:22:04
1012 (0x03F4)
Successfully intialized Logging for TS Manager. TSManager
09/03/2015 09:22:04
1580 (0x062C)
Commandline: "TsManager.exe"
TSManager 09/03/2015 09:22:04
1580 (0x062C)
/service parameter found at index: -1 TSManager
09/03/2015 09:22:04
1580 (0x062C)
/standalone parameter found at index: -1
TSManager 09/03/2015 09:22:04
1580 (0x062C)
/noclient parameter found at index: -1 TSManager
09/03/2015 09:22:04
1580 (0x062C)
Successfully registered Task Sequencing COM Interface.
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Executing as a standalone exe TSManager
09/03/2015 09:22:04
1580 (0x062C)
Initializing TS Environment
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Opening Task Sequencing Environment TSManager
09/03/2015 09:22:04
1580 (0x062C)
Deleting volume ID file C:\_SMSTSVolumeID.7159644d-f741-45d5-ab29-0ad8aa4771ca ...
TSManager
09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
pwszPath && *pwszPath, HRESULT=80070057 (e:\nts_sccm_release\sms\framework\tscore\resolvesource.cpp,228)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Path variable OSDisk converted from 9D26CD310000401F00000000: to C:
TSManager 09/03/2015 09:22:04
1580 (0x062C)
NOT executing in WinPE
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Compiling Config policy TSManager
09/03/2015 09:22:04
1580 (0x062C)
Compiling config policies...
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Compiling SysHealthConfig policy...
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSysHealthClientConfig' TSManager
09/03/2015 09:22:04
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Decompression (zlib) succeeded: original size 683, uncompressed size 4652.
TSManager 09/03/2015 09:22:04
1580 (0x062C)
Instance path = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling SoftUpdConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSWUpdateClientConfig'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1921, uncompressed size 19242.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling SoftDistClientConfig policy... TSManager
09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSSoftDistClientConfig'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1329, uncompressed size 13740.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling NAAConfig policy... TSManager
09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSNAAConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 1403, uncompressed size 8996.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_NetworkAccessAccount.SiteSettingsKey="2"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling RebootSettingsConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSRebootSettingsConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 432, uncompressed size 1560.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_RebootSettings.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Compiling AppManClientConfig policy...
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Retrieving value from TSEnv for '_SMSTSAppManClientConfigPolicy'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
::DecompressBuffer(65536)
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Decompression (zlib) succeeded: original size 983, uncompressed size 6358.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Instance path = 'CCM_ApplicationManagementClientConfig.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Start to compile TS policy
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Failed to find property 'AutoApplyDeployment' in 'CCM_ApplicationManagementClientConfig' class defintion. Error 0x80041002. Default value will be used for this property
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy complied successfully in WMI 'root\ccm\policy\defaultmachine\requestedconfig' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
End TS policy compilation
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Get Install Directory for SMS Client
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Updating settings in \\.\root\ccm\policy\machine\actualconfig TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 424
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D}") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source SMS:Client:Default:{8864FB91-94EE-4F16-A144-0D82A232049D} successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 0 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmPortal") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager
09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmPortal successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 0 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager 09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 9 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source Local successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
RequestedConfig policy instance(s) : 13 TSManager
09/03/2015 09:22:05
1580 (0x062C)
Locked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Namespace: \\.\ROOT\ccm\policy\machine\RequestedConfig, Query: SELECT PolicyID FROM CCM_Policy_Policy5 WHERE (PolicySource = "CcmTaskSequence") AND (PolicyState = "Active") AND (PolicyType = "Machine")
TSManager 09/03/2015 09:22:05
1580 (0x062C)
There is no ccm_policy_policy instance, skipping addition to realinst map
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Unlocked \\.\ROOT\ccm\policy\machine\RequestedConfig for source CcmTaskSequence successfully
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Total RequestedConfig policy instance(s) : 446 TSManager
09/03/2015 09:22:05
1580 (0x062C)
New/Changed ActualConfig policy instance(s) : 2
TSManager 09/03/2015 09:22:05
1580 (0x062C)
[1] Added/updated setting 'ccm_networkaccessaccount:sitesettingskey=1'.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
[2] Added/updated setting 'ccm_networkaccessaccount:sitesettingskey=2'.
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Policy evaluation initiated
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Waiting for policy to be compiled in 'root\ccm\policy\machine' namespace
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' TSManager
09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_SystemHealthClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"'
TSManager
09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_SoftwareUpdatesClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"'
TSManager
09/03/2015 09:22:05 1580 (0x062C)
Verified policy for instance path 'CCM_SoftwareDistributionClientConfig.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccm\policy\machine' namespace
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Query = 'CCM_NetworkAccessAccount.SiteSettingsKey="1"'
TSManager 09/03/2015 09:22:05
1580 (0x062C)
Verified policy for instance path 'CCM_NetworkAccessAccount.SiteSettingsKey="1"' compiled in 'root\ccDuplicate, see https://social.technet.microsoft.com/Forums/en-US/ab1fb705-bba9-45ef-a2aa-511a0a98ed28/osd-deployment-failure-smstslog-attached-pl?forum=configmanagerosd.
Torsten Meringer | http://www.mssccmfaq.de -
Application deployment failure
Hi All,
I am facing an application deployment failure issue for Autocad application. It is mandatory that application downloaded to the client machine should have folder name as AdminImage; however the content is copied under cache folder and hence while installation
it is getting failed.
It is getting installed through script and while installation it automatically created adminimage folder but eventually gets failed.
The source location were the content is like
Complete package-->Autocad-->AdminImage
The content location path given is till
....\Autocad\
Program for uninstall and install
AdminImage\install.vbs and AdminImage\uninstall.vbs
Please suggesthow do you reference to the path adminimage in your script, using pushd?
the datasource for the application is \autocad\ ? -
Email notification on Cube load completion/failure
Hi all,
I'm trying to create a trigger that will send an email on the success/failure of a data load. It seems that I can only use cube members in the where and when clauses for triggers however. Is there an easy way to get email notification from the cube builds? Currently we are using AIS to schedule and build the cubes and it doesn't provide an obvious way to do this. Any advice would be appreciated.
Thanks in advance!The TechRef has good examples for "almost" every command or statement.
What you need to do is to write MaxL script file to load your data and execute Calculation/Aggregation and if it fails anywhere you can log that to an error file, then call that script from a batch file that sends an email at the end, you can use a command line email applications such as Clemail. You also can put a condition in your batch file to send an email only in case of failure file exists.
here are few steps you may follow:
-select your application and database
-unlock all objects
-disable connections and log out users
-build your dimension, if you do build your outline before you load your data**not necessary**
-load your data
-execute Calculation/Aggregation
- enable DB connection
- define your label at the end of MaxL Script
in your batch file:
- define your parameters that you are going to pass to your MaxL script
- call your MaxL script: essmsh "fileName"
- call your email application
if you are not familiar with batch scripting, Google for some examples.
hope this helps. -
ORABPEL START-UP ERROR!!!!!!!! - Connection Pool Deployment failure
I have installed BPEL Process Manager with Weblogic 8.1SP4.
I am using Oracle Database 9.2.0.5.0 for Oracle BPEL Process
Manager installation.
Also i have made following changes for JDBC thin driver accordingly.
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.OracleDriver"
MaxCapacity="15" LoginDelaySeconds="1"
Name="BPELServerPool"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true" SupportsLocalTransaction="true"
Targets="orabpelServer"
URL="jdbc:oracle:thin:orabpel/orabpel_password@hostname:port:database_servoce_
name"/>
I m getting following error while starting the server :-
Connection Pool "BPELServerPool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: invalid arguments in call.
Also I m getting following error during startup
ORABPEL-04076
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "BPELServerDataSourceWorkflow".
Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the connection pool properties as defined in the application server startup properties are valid.
at com.collaxa.cube.engine.data.ConnectionFactory$ConnectionFactoryImpl.init(ConnectionFactory.java:268)
at com.collaxa.cube.engine.data.ConnectionFactory.update(ConnectionFactory.java:54)
at com.collaxa.cube.engine.data.ConnectionFactory.init(ConnectionFactory.java:42)
at com.collaxa.cube.admin.data.ServerConnectionFactory.init(ServerConnectionFactory.java:34)
at com.collaxa.cube.admin.adaptors.ServerAdaptorManager.init(ServerAdaptorManager.java:66)
at com.collaxa.cube.admin.ServerManager.__init(ServerManager.java:211)
at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:99)
at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:200)
at com.collaxa.cube.ejb.impl.ServerBean_g9inc6_EOImpl.init(ServerBean_g9inc6_EOImpl.java:856)
at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:62)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServletStubImpl.java:1028)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:904)
at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:883)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:822)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3333)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3278)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3259)
at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:5949)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:862)
at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2127)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2168)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2115)
at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3082)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1751)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:359)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
<Error> <HTTP> <BEA-101216> <Servlet: "cxloader" failed to preload on startup in Web application: "startup".
javax.servlet.ServletException:
ORABPEL START-UP ERROR!!!!!!!!
Can Anyone kindly suggest what is the problem ?I have installed BPEL Process Manager with Weblogic 8.1SP4.
I am using Oracle Database 9.2.0.5.0 for Oracle BPEL Process
Manager installation.
Also i have made following changes for JDBC thin driver accordingly.
<JDBCConnectionPool CapacityIncrement="2"
DriverName="oracle.jdbc.OracleDriver"
MaxCapacity="15" LoginDelaySeconds="1"
Name="BPELServerPool"
ShrinkPeriodMinutes="15"
ShrinkingEnabled="true" SupportsLocalTransaction="true"
Targets="orabpelServer"
URL="jdbc:oracle:thin:orabpel/orabpel_password@hostname:port:database_servoce_
name"/>
I m getting following error while starting the server :-
Connection Pool "BPELServerPool" deployment failed with the following error: 0:Could not create pool connection. The DBMS driver exception was: invalid arguments in call.
Also I m getting following error during startup
ORABPEL-04076
Cannot lookup jdbc datasource.
The process domain was unable to lookup the TX datasource "BPELServerDataSourceWorkflow".
Please check that the machine hosting the datasource is physically connected to the network. Additionally check that the connection pool properties as defined in the application server startup properties are valid.
at com.collaxa.cube.engine.data.ConnectionFactory$ConnectionFactoryImpl.init(ConnectionFactory.java:268)
at com.collaxa.cube.engine.data.ConnectionFactory.update(ConnectionFactory.java:54)
at com.collaxa.cube.engine.data.ConnectionFactory.init(ConnectionFactory.java:42)
at com.collaxa.cube.admin.data.ServerConnectionFactory.init(ServerConnectionFactory.java:34)
at com.collaxa.cube.admin.adaptors.ServerAdaptorManager.init(ServerAdaptorManager.java:66)
at com.collaxa.cube.admin.ServerManager.__init(ServerManager.java:211)
at com.collaxa.cube.admin.ServerManager.init(ServerManager.java:99)
at com.collaxa.cube.ejb.impl.ServerBean.init(ServerBean.java:200)
at com.collaxa.cube.ejb.impl.ServerBean_g9inc6_EOImpl.init(ServerBean_g9inc6_EOImpl.java:856)
at com.collaxa.cube.admin.CXLoaderServlet.init(CXLoaderServlet.java:62)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl$ServletInitAction.run(ServletStubImpl.java:1028)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:904)
at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:883)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:822)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:3333)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:3278)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:3259)
at weblogic.servlet.internal.WebAppServletContext.setStarted(WebAppServletContext.java:5949)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:862)
at weblogic.j2ee.J2EEApplicationContainer.start(J2EEApplicationContainer.java:2127)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2168)
at weblogic.j2ee.J2EEApplicationContainer.activate(J2EEApplicationContainer.java:2115)
at weblogic.management.deploy.slave.SlaveDeployer$Application.setActivation(SlaveDeployer.java:3082)
at weblogic.management.deploy.slave.SlaveDeployer.setActivationStateForAllApplications(SlaveDeployer.java:1751)
at weblogic.management.deploy.slave.SlaveDeployer.resume(SlaveDeployer.java:359)
at weblogic.management.deploy.DeploymentManagerServerLifeCycleImpl.resume(DeploymentManagerServerLifeCycleImpl.java:229)
at weblogic.t3.srvr.SubsystemManager.resume(SubsystemManager.java:131)
at weblogic.t3.srvr.T3Srvr.resume(T3Srvr.java:966)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:361)
at weblogic.Server.main(Server.java:32)
<Error> <HTTP> <BEA-101216> <Servlet: "cxloader" failed to preload on startup in Web application: "startup".
javax.servlet.ServletException:
ORABPEL START-UP ERROR!!!!!!!!
Can Anyone kindly suggest what is the problem ? -
Hello everyone,
Give you a little background on the hardware/software which we are running to do a Windows 8.1 Deployment, we have an VM of Windows Server 2008 R2 with Windows Deployment Services installed and configured correctly. For the boot image it's a Windows 8.1
WIM and as for the Install Image we have a base image of Win 8.1 with all drivers installed for an HP EliteBook 8540w , we Syspreped and then capture the image using the W2K capture on PXE to capture and upload the image to the server. This is where we first
ran into the problem of connecting to the server and had to inject the lan drivers to have network connectivity. After the image was uploaded to the server, we thought to try and run a deployment of that image on an identical laptop. PXE boot into that Image,
it asks for domain credentials which are accepted it begins the installation process and fails at "Windows installation cannot continue because a required driver could not be installed"?
We just set up client logging on the server and it is useless it just says that the driver is missing, but what driver is missing? There are thousands, which one?
Another forum has this issue: http://social.technet.microsoft.com/Forums/windows/en-US/4cf0b378-09d0-4e0b-bc6e-3d898b668f98/during-deployment-windows-installation-cannot-continue-because-a-required-driver-could-not-be?forum=w8itproinstallHi,
Please first check the solution here:
Error: Windows installation cannot continue because a required driver could not be installed
http://support.brainwaregroup.com/kb/article/AA-00702/0/Error%3A-Windows-installation-cannot-continue-because-a-required-driver-could-not-be-installed.html
Also, please try to find out Setup logs from the client computer, and we can see the details in the Setup log:
If the failure occurs in Windows PE before the disk configuration page of the WDS client is completed, you can find the logs at the
X:\Windows\Panther folder. Use Shift+F10 to open a command prompt, and then change the directory to the location.
If the failure occurs in Windows PE after the disk configuration page of the WDS client is completed, you can find the logs on the local disk volume at the
$Windows.~BT\Sources\Panther folder. The local disk volume is usually the drive
C. Use Shift+F10 to open a command prompt, and then change the directory to the location.
Kate Li
TechNet Community Support -
Hi All,
We have an ASO cubes with millions of records having 10 dimensions (1 Account dimension).Few facts values are getting changed after aggregation where without aggregation, we are getting correct values.
We are loading data from source system (Teradata) where we have rounded off values till 7 places of decimal. But when we see data at report level (WA) it displays non zero values after 7 places of decimal for few facts.
For us it is making a huge difference as we are calculating var% value on report. The denominator value for this var% which is 0 for certain line items but due to aggregation its showing some value (0.0000000198547587458) which result very large values for var%.
Is it the tool behavior or there is some problem with aggregation?
Any input will be really appreciable.
Thanks,What doesn't make sense to me is you don't need aggregations on level zero members as that is where the data is stored. I'm guessing oyu mean level sero members of one dimension and higher level members of other dimensions. Are those other dimensions dynamic or stored? Do you have a lot of calculations going on that are being retrieved? Have you materalized aggregations on the cube?
-
Deploy failure due to jta-data-source in persistence.xml
Hey All,
This is driving me insane. Every example, including the Sun tutorials (which don't work on my instance of Glassfish), list persistence.xml files like:
"<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="1.0">
<persistence-unit name="persistence_sample">
<provider>oracle.toplink.essentials.ejb.cmp3.EntityManagerFactoryProvider</provider>
<jta-data-source>jdbc/SamplesDB</jta-data-source>
<non-jta-data-source>jdbc/SamplesDB__nontx</non-jta-data-source>
</persistence-unit>
</persistence>"
I've tried every combination of <persistence...> tags, with namespace definitions, posted in examples on the internet, but my problem is, any time I deploy my ear with a "<jta-data-source>" tag specified, I receive the following failure from the App Server:
"Error loading deployment descriptors for module [pi-0] Line 26 Column 24 -- Deployment descriptor file META-INF/persistence.xml in archive [pi-ejb.jar]. cvc-complex-type.2.4.a: Invalid content was found starting with element 'jta-data-source'. One of '{"http://java.sun.com/xml/ns/persistence":class, "http://java.sun.com/xml/ns/persistence":exclude-unlisted-classes, "http://java.sun.com/xml/ns/persistence":properties}' is expected.
at com.sun.enterprise.deployment.backend.Deployer.loadDescriptors(Deployer.java:352)
at com.sun.enterprise.deployment.backend.AppDeployerBase.loadDescriptors(AppDeployerBase.java:327)
at com.sun.enterprise.deployment.backend.AppDeployer.explodeArchive(AppDeployer.java:332)
at com.sun.enterprise.deployment.backend.AppDeployer.deploy(AppDeployer.java:182)
at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:129)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:169)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:95)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:871)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:266)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:739)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:174)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:210)
Caused by: org.xml.sax.SAXParseException: cvc-complex-type.2.4.a: Invalid content was found starting with element 'jta-data-source'. One of '{"http://java.sun.com/xml/ns/persistence":class, "http://java.sun.com/xml/ns/persistence":exclude-unlisted-classes, "http://java.sun.com/xml/ns/persistence":properties}' is expected.
at com.sun.enterprise.deployment.io.DeploymentDescriptorFile.read(DeploymentDescriptorFile.java:285)
at com.sun.enterprise.deployment.archivist.Archivist.readPersistenceDeploymentDescriptor(Archivist.java:1718)
at com.sun.enterprise.deployment.archivist.EjbArchivist.readPersistenceDeploymentDescriptors(EjbArchivist.java:239)
at com.sun.enterprise.deployment.archivist.Archivist.readDeploymentDescriptors(Archivist.java:301)
at com.sun.enterprise.deployment.archivist.Archivist.open(Archivist.java:200)
at com.sun.enterprise.deployment.archivist.ApplicationArchivist.readModulesDescriptors(ApplicationArchivist.java:308)
at com.sun.enterprise.deployment.backend.Deployer.loadDescriptors(Deployer.java:316)
... 11 more"
Note that this only happens when I have a <jta-data-source> element in the persistence.xml file. When I comment out the jta-data-source, it deploys without problems (though it doesn't do much). Here's my persistence-unit code:
<persistence-unit name="prodcontext" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<class>OneOfMyClasses</class>
<jta-data-source>jdbc/SamplesDB</jta-data-source>
</persistence-unit>
Please help.
Thank you,
ToddOkay okay, my mistake (staring at this thing too long).
The solution is, I confess I overlooked it, the jta-data-source node in the xml has to follow the exact order specified in the xsd. I was putting it below the class nodes, which is a no-no. -
J2EE-EJB-Deploying an Enterprise JavaBean-deployment failure
I am unable to deploy a simple EJB application . I am using j2skee1.3.1 and J2SDK1.4.0
The related files and error messages are reproduced.
The java files and ear files are in d:\myjava\ejb
class path is .;d:\j2sdkee1.3.1\lib\j2ee.jar;D:\forte_jdk\j2sdk1.4.0\lib;d:\myjava
j2ee_home= d:\j2sdkee1.3.1
java_home=D:\forte_jdk\j2sdk1.4.0
path=%SYSTEMROOT%;%SYSTEMROOT%\command;c:;d:\j2sdkee1.3.1\bin;%SYSTEMROOT%\system32;%SYSTEMROOT%\system32\WBEM;C:\Program Files\Common Files\Adaptec Shared\System;D:\forte_jdk\j2sdk1.4.0\bin;d\j2sdkee1.3.1\javaservlets;d:\MSSQL7\BINN;D:\forte_jdk\j2sdk1.4.0\bdk1_1\beans\beanbox
Can any one suggest a solution.
************calculatorHome**********
import java.io.Serializable;
import java.rmi.RemoteException;
import javax.ejb.CreateException;
import javax.ejb.EJBHome;
public interface calculatorHome extends EJBHome
calculator create() throws RemoteException, CreateException;
************calculator***************
import javax.ejb.EJBObject;
import java.rmi.RemoteException;
public interface calculator extends EJBObject
public double dollorToRs (double dollars) throws RemoteException;
**********calculatorEJB***********************
import java.rmi.RemoteException;
import javax.ejb.SessionBean;
import javax.ejb.SessionContext;
public class calculatorEJB implements SessionBean
public double dollarToRs (double dollars)
return dollars * 48.15;
public calculatorEJB() {}
public void ejbCreate() {}
public void ejbRemove() {}
public void ejbActivate() {}
public void ejbPassivate() {}
public void setSessionContext (SessionContext sc) {}
***********************************descriptor*************
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<display-name>newcalculatorjar</display-name>
<enterprise-beans>
<session>
<display-name>calculatorEJB</display-name>
<ejb-name>calculatorEJB</ejb-name>
<home>calculatorHome</home>
<remote>calculator</remote>
<ejb-class>calculatorEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Bean</transaction-type>
<security-identity>
<description></description>
<use-caller-identity></use-caller-identity>
</security-identity>
</session>
</enterprise-beans>
</ejb-jar>
***************************error message*****
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN' 'http://java.sun.com/dtd/ejb-jar_2_0.dtd'>
<ejb-jar>
<display-name>newcalculatorjar</display-name>
<enterprise-beans>
<session>
<display-name>calculatorEJB</display-name>
<ejb-name>calculatorEJB</ejb-name>
<home>calculatorHome</home>
<remote>calculator</remote>
<ejb-class>calculatorEJB</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Bean</transaction-type>
<security-identity>
<description></description>
<use-caller-identity></use-caller-identity>
</security-identity>
</session>
</enterprise-beans>
</ejb-jar>
STATIC VERIFICATION RESULTS
NUMBER OF FAILURES/WARNINGS/ERRORS
# of Failures : 3
# of Warnings : 0
# of Errors : 0
RESULTS FOR EJB-RELATED TESTS
FAILED TESTS :
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodArgs
Test Assertion : Remote interface business methods have matching method arguments test
Test Description : For [ calculatorEJB ]
For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching arguments was found for method [ dollorToRs ].
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodException
Test Assertion : Remote interface business methods have matching method exceptions test
Test Description : For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching exceptions was found for method [ dollorToRs ].
Test Name : tests.ejb.intf.remoteintf.RemoteInterfaceMatchMethodReturn
Test Assertion : Remote interface business methods have matching method return type test
Test Description : For [ calculatorEJB ]
For Remote Interface [ calculator ] method [ dollorToRs ]
Error: No corresponding business method with matching return type was found for method [ dollorToRs ].
Thanks in advance.
NagarajanIn EJB home you have -
public double dollorToRs (double dollars) throwsIn EJB you have -
public double dollarToRs (double dollars)There is a spelling difference in the function name
Maybe you are looking for
-
Is there a way to go and look at the purchases that I paid for on my ipad with itunes?
Is there a way for me to look at the purchases that I paid for on my ipad with itunes?
-
Bluetooth drivers for a pavilion g7 2323dx laptop
I've searched the HP network and cant find a bluetooth driver for my computer can anyone provide some information?
-
I need to be able to navigate between tabs on a canvas using just keyboard access keys, similar to access keys on buttons. Can anyone advise on if this is possible and if so how?? Many Thanks, Jayesh Kavia
-
Hello, anyone know if there is a fix/workaround for the <canvas> problem with Firefox 3 (picture frames and shadows not shown) like the one for the photo album? Thanks.
-
In trying to edit my pics only the slide show pics is editing - not the main pic. Trying to crop the pic and the whole main screen goes grey