Role and User level Risk Analysis is not displaying any output or report.

Hello,
I have a problem when I run risk analysis, both in foreground and background. The issue is that no report is displayed and I have followed all the instructions carefully.
I have done the following:
Maintained Access Risk table to contain functions and assigned it to a rule set.
The functions contains actions and permissions that are explicitly assigned to my ERP connector in the system field in both action and permission tabs.
I have run the sync job to update the roles in the GRC server from the ERP backend. I am surprise that no report is displayed as I have a test role that I am sure has conflict as per my function definition.
Please advice me if there is something I am missing.
Thank you.

Hello John,
Good Morning !!
Sorry for the late reply , but to my surprise , i do not see any tab containing "Actions & Permission".
This are the tabs that i have in NWBC
My Home
Master Data
Access Management
Rule Setup
Reports & Analytics
Assessments
Setup
I am currently on SAPK-V1005INGRCFNDA support package for GRCFND_A .
Is there something wrong that's hapenning?? or i am looking at wrong place !!
Under Setups , i have an option "Access Rule Maintenance" which has
Rule Sets
Functions
Access Risks
When i click Accesas rule sets , i see Risk IDS : e.g. B001, B002 etc and when i click "generate rule" in foregroubd/background",
it does not generate any rules ,when i click
View Action Rules
View Permission Rules
It shows "Table does not contain any data".
Please guide.
Thanks
Regards,
Victor

Similar Messages

Monitor is not displaying any output

Hi all,
I have sun ultra 25 workstation with solaris 10 OS with SUN XVR-300 graphics card. my problem is that monitor is not displaying any output however monitor is fine with another workstation.
when I powered on workstation, front panel shows green light.but monitor is not showing any output. however VGA cable and monitor is OK.
I am in trouble PLZ help me ASAP.
T&R
gaurav

I have also display problem, i use ibm desktop, more quite days the colour of monitor goes red. then i put some piece of paper between display jack & cpu body, then colour is ok, but when when i inserted new VGA card in mother board, when machine reboot it shows good colour of windows logos and ten the monitor display blank, i remove the VGA card, ram, cell, processor, all the cables & then restart but again no display, when i remove vga card, the monitor display no cable also blink light of monitor goes green but when i insert the wire the blink light goes yellow & one more there is no light in keyboard, when i inserted the keyboard slightly light blinks then it goes off, whereas the cpu starts smoothly.

Inconsistency Data between Role Level & User Level Risk Analysis

Hi,
When we run Role Level Risk Analysis for a role (Ex: XYZ), there is no SOD conflicts. But when we try to run the user level analysis, this role shows SOD conflicts. I mean, XYZ is assigned with other roles. Combination of other roles access may bring SOD conflict, thats fine, but here the challenge is role XYZ itself has SOD conflicts. The same does not appear when we run Role Level Risk Analysis!!
How could this happen??
Thanks,
Karthik

Hi Karthik,
The role might be mitigated at role level.
In RAR Anayze tool, click -More options to expand the selection options
Chose "Exclude Mitigated Risks: No"

IMac G5 will not boot and if it does, it does not display any logo

Hi everyone, any assistance with this issue would be greatly appreciated. This is my godmothers iMac G5 that my family gave her a few years ago, it is the 2.0GHz model with no iSight camera but has the built in WiFi and Bluetooth.
I went to start it today, after it being off for a week and a half and it will not boot. I start it up and it displays the solid white LED light on the front and revs its fans until I stop it. I got it to get past this once by resetting the SMU but all it did was make the Apple hardware test sound noise and get a blank white screen. No Apple logo or anything. Entire time it rev'd its fans.
Thank you! If it is broken I will most likely sell it for parts and either buy her an older unibody MacBook or wait for the next-gen iPad with FaceTime and a buy a keyboard dock.

HI and welcome to Apple Discussions...
If you have the install disc that came with this G5, try checking the startup disk for errors.
Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu and launch Disk Utility.
(In Mac OS X 10.4 or later, you must select your language first from the installer menu)
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
Select your start up disk and click Restart
While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 10% to 15% free disk space
If it won't boot from an install disc, try booting in Safe Mode Launch Disk Utility (Applications/Utilities). It's possible to do a live verification in Safe Mode to check the startup disk for errors, but not repair disk but at least you might get some insight as to the problem.
Carolyn

The system could not create any outputs for mv type 561

Hi,
I tried to print out a goods receipt others in MIGO and i received "The system could not create any outputs" when i tick on output control. I tried to follow the steps in How to print the material document in MB1C movement 561 I stuck at step 4 where i cannot find MvT 561. Please help
Chk your setting as below to get GR print out.
. Maintain the Printer Name in MM->Inv Mgmt and Phy Inv->Print Control-> Gen Settings-> Printer Setting Enter the local printer where you want to print your Goods posting document
2. Ensure that in MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In MM->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In MM->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
Here for Particular mvt type 101,201,121,311,313,501,521,561 etcu2026 Maintain the Print item as 1--Material document printout
5. In MM->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
Select the particular Output type then goto Details
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
b. Print Parameter is 7
6. In MM->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc , Maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

issue is resolved

Table that stores the business role and user id mapping

Hi,
i want to know the table that stores the Business role and the business role and user id mapping in CRM system.
Thanks in Advance.
Regards,
Pricy

Hi Mary,
There is no direct table but there is a way to find it.
HRP1263 is the table where business roles are stored when maintained at org level. These are stored against the Position.
For getting user ID and position linkage refer table HRP1001.
In HRP1001 table use below criteria to get the User and Position.
OTYPE = CP
SCLAS = US
SOBID = User ID
ENDDA = 31.12.9999
Get the OBJID
Query the HRP1001 table again with following
OTYPE = CP
OBJID = OBJID from above Query
ENDDA = 31.12.9999
SCLAS = S
SOBID = Thats Position.
Pass the position to HRP1263 as below.
OTYPE = S
OBJID = POSITION
PROFILE - Thats business role assigned for the given position and user.
Hope this is helpful.
Regards,
Naresh

Configuring roles and users (adf security) application context wise.

Dear All,
I referred this tutorial (http://biemond.blogspot.com/2008/12/using-database-tables-as-authentication.html) which shows how to hook up adf security with database schema but at domain level which will be common to all applications in that domain. I want to make it different to each application. (i.e each application will use differene database schema for storing user credientials i.e enterprise roles,application roles and users.)
Can any one please point me to proper way..
Regards,
Santosh
jdev 11.1.1.2.0

Dear Frank,
<i>
Instead you have a single identity management system and have the application policies being different for the applications.Using ADF Security, users and groups can have different privileges in different applications
</i>
suppose i have 3 applications that use adf security, the users will be common to all applications. right..?Roles and group can be different for applications.
application polices means roles and group..?
So how it(application polices) can be made different for applications? is it inbuilt or some configurations needed ?. Can you point me to some blogs or tutorials for more reference.
Bet: Incase i hook up adf security with database schema.
Regards,
Santosh.

Is it possible to export and import the roles and users tables?

Hi,
is there any possibility to export and import the role and user definitions?
We have a SAP MDM repository with a lot of roles and users and also with a lot of changes.
And now I'm searching for a fast and efficient way of managing the roles and users.
Thanks and Regards, Melanie

Hi Melanie,
There is no export/import functionality for roles and users. The only way to manage these in an automated way would be to write a program that uses the Java or ABAP APIs. Both APIs expose functionality to create, update and delete roles and users.
Hope this helps,
Richard

Identify system defained roles and user defained roles

Hi,
I have an issue.
Oracle Version : 9.2.0.1.0
Operating system: Windows 2000 server
How can we identify system defained roles and user defained roles?
Please help me to solve this.
Regards,
Mat.

Check yourself these views
DBA_ROLES
DBA_ROLE_PRIVS
USER_ROLE_PRIVS
ROLE_ROLE_PRIVS
ROLE_SYS_PRIVS
ROLE_TAB_PRIVS
SESSION_ROLES
For default predefined roles in the database, take a look at the below url.
http://youngcow.net/doc/oracle10g/network.102/b14266/admusers.htm#i1008784
Regards,
Sabdar Syed.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error.

My Mac Pro is not displaying any images for videos or games, it is showing sound and working but nothing else. DVD player is also coming up with an error. I'm not sure why neither is working, it just suddenly happened. I have done nothing different.

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

HT1296 when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

when connecting my Ipad on mac mini and launching Itunes, the "INFO" is not displayed and my calendar and contacts are not synchronized

Thanks for your advice. However my private informations have nothing to do on a wandering cloud that floats on high over US vales and hills ( and credit to William WORDSWORTH for his poetry)

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

When i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas?

when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

when i go to attach a photo to email or load it to facebook it will not display any photos from my iphoto library and only allows me load ones that are in photo booth or saved on the desktop. Any ideas what is wrong?

Role and User level Risk Analysis is not displaying any output or report.

Similar Messages

Maybe you are looking for