Role are not effected to user

Hi to all ,
created user "test", by login to portal useing this "test" user, default Home role is dispalyed..
Now i created my Custom role .. i assigned this Role to user "test" in user administration.
i checked is assigned roles my customrole is assigned but it is not displayed in portal while user login.
is there any controls while assigning Roles.. to user ?

Hi Eswar,
Check the role permission.
Set the group Everyone for Read permission, and set the flags End User and Role Assigner.
Good Luck
Eduardo

Similar Messages

Portal Roles are not visible

Hi,
We have upgraged Portal (Nw 2004s) SP17 to SP18 ,But after upgradation portal roles are not visible for users and Portal adminstors (J2EE_ADMIN ) also.
Standard roles like System ,user and Content Admin roles also not visible.It shows only blank screen after login to portal.
It is critial issue .Please suggest how to solve this issue.
Thanks
Srikanth M

Make sure there are no errors in the browser in the bottom left hand corner. Also, are you using a fully wualified name to access the portal? When you were on SP17 were you using standard roles or did you make your own copy of the roles and assign your users to the copied roles?
If you navigate to the portal content studio directly, can you see the role contents?
After launching /useradmin and authenticating, paste http://host:50000/irj/servlet/prt/portal/prtmode/preview/prtroot/pcd!3aportal_content!2fadministrator!2fcontent_admin!2fcontent_admin_role!2fcom.sap.portal.content_admin_ws!2fcom.sap.portal.portal_content?sap-config-mode=true into your browser and you are in the content studio.

Users are created but Roles are not Provisioned in the Target System

Hi,
It would be great if somebody would provided solution to my problem. The problem is when I try to create the Users in Identity Managment UI then the Users are created in the Target systems but the Roles are not provisioned to the Users.
In the provisioning job SetABAPRole&ProfileForUser,
It is says In the Error putNextEntry failed storing
Exception from Modify operation:com.sap.idm.ic.ToPassException: User does not exist
MSKEY 58437
Please note the When we create the User, the user is created however the Roles is not provisioned to the user.
Regards,
Hakim

Hello Nits,
since this thread is from 2010 and the OP was logged on last in 2012 (as you can see in the profile), I don't think you'll get an answer here.
Please create a new thread to explain your problem (with version and SP numbers, logs etc). You can add a link to this thread to show, that the problem is similar.
Regards,
Steffi.

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

BW Roles are not updated in BOBJ system

Hi All,
We have created additional roles in BW system. But these roles are not updated in BOBJ system(BI 4.0). I am not able to see these roles in SAP Authentication when we update the user option too. Any solution for this?
Regards,
Krishna.K

Thanks for the reply victor,
Users are not yet assigned to these roles. But, it should display in the left hand side while importing?
So, Is this because of no users in these roles?
Regards,
Krishna.K

SRM Portal roles are not getting accessible

Hello SDN contributors,
I have a strange burning issue. Please help me out.
Issue:
When I assign any SRM Portal roles to users,roles are not getting accessible until I assign a custom ESS(HCM) role in the backend ECC system which is mapped with a portal ESS role.
After doing this only from Portal front-end perspective ,SRM users are getting access on SRM roles.
But I do not able to find out the possible reason behind this.
Please suggest me to get out of this issue.
Regards,
Sriram

Hello Bala,
First of all thank you for your response.
Yes , I'm sure that the back-end role is mapped to only ess role not to SRM roles.
Unable to find out the origin for this issue. Please throw some valuable suggestions on this.
Regards,
Sri ram.

Roles are not found after client refresh

Dear Friends,
Yesterday night i had refreshed our 210 client by 220 client in same system by using SCCL Transaction code by logging into target system. I got message as client copy completed successfully. For that i choose profile SAP_CUST.(Because requirement is they need all customization data only).
But after this activity i observe that all user present in system, but some roles are not fount which was present before.
So users face authorization issue.
So please help.
What are post activity after client copy?
Thanks,
Regards,
Sachin

when you mean "the contact is still in the Address Book" you mean you can see in the list on the left hand side column? but you just cannot see it if you search for it via the search field. is that correct?
i have had issues with syncing contacts added to my iphone, in these instances the contact or the info added to the existing contact would not flow through to the mac's AB. I solved this by doing a reset of the iphone in itunes and then syncing again, and from then on things started to work.
also there is an option in itunes in the info pane that let's you select which group a contact is added to on the iphone, if indeed you have and use groups in AB, and of course which groups you would liked synced if you decide not to sync all contacts. you may want to check that these settings are correct and do not somehow screw up a contact added top iphone during the sync... just an idea.
hop this helps

No portal roles are assigned for this user.If this problem persists, contac

I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
iam using abap+java enginee how config in abap enginne ,iwant which role to assign j2ee_admin user
i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO but it show same problem
please help me..
Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

Balu,
Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
Check this thread in [here|J2EE Failed to start , after changing UME datasource;.
Good Luck!
Sandeep Tudumu

Roles are not updating in the GRC 10.0 System.

Hi
We had created Z role in ECC system and Ran the Sync Jobs in the GRC 10.0 System .
But the role created in backend System(ECC) was not updating in the roles of the GRC system.
Can any one provide right solution.
Thanks

Hi Wipro Basis Team
On running the sync job what are you expecting to occur when you say the roles are not updating in GRC System? I wonder if you are expecting a different outcome to the purpose of the sync jobs.
Regards
Colleen

Customizing Message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer spezific text or to redirekt to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check these threads.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Cusomize message "No portal roles are assigned for this user"?

Hello,
we would like to give the user some hint on who to speek with in case he has no portal roles assigned.
So we would like to customize the messaage "No portal roles are assigned for this user" to some customer specific text or to redirect to a customer specific iView.
I would appreciate any kind of hints.
Best regards,
Lutz Rottmann

Hi,
Check this thread.
Customizing message "No portal roles are assigned for this user"
No portal roles are assigned for this user
Regards,
Harini S

Sequences are not visible to user/schema

Hi
I have copied a schema(abcd1)(schema level refresh) from prod to dev(abcd2),i verified that all objects(tables,views,synonyms and sequences etc..) got created in the dev schema(abcd2) ,but now the client complains that the sequences are not visible to user/schema(abcd2) in dev,he says it was visible before and that they are visible to another schema(abcd3) in dev.... can anyone please advise? Thanks!

877410 wrote:
Elapsed: 00:00:00.09
SQL> SELECT * FROM all_tab_privs WHERE table_name = 'ABC_WXYZ_PW_SEQ';
no rows selectedThat means the sequence either doesn't exist, or the user that ran the query doesn't have access to the sequence. If you have an account with DBA access I'd try running the query against the DBA_TAB_PRIVS view.
You may also want to query the _SEQUENCES (ALL, USER, DBA) view to see if the sequence exists.

Privileges granted to roles sometimes are not effective(not functioning)?

Hello,
I have experienced where roles where granted and privileges granted to the roles. The roles are they granted to certain users. But when these users try to perform dml/ddl, they get insufficient priviledges even though these users were granted the roles which do contain the correct priviledges. Why are some priviledges not functioning when they are granted to the roles? To resolve, direct grants were granted to the users. But why aren't they working through the roles? Thank you.

Hi watson2000 ,
can you send the scripts...what you have performed.
Since, I did not faced any problem with granting privliges and roles.
If you provide some information on that (little more) whjat you have done so that we can help you out..
Thanks
Pavan Kumar N

Authorization : Changes in role are not directly taken effect.

Authorization
After creating a role and assigning this to a BP the changes are not directly taken effect. Before logged into the system I runned the program: PFCG_TIME_DEPENDENCY.
Does any body know what the problem is? Does I need o run a program?
Any help is welcome.
Regards Hicham

see if it helps.
http://help.sap.com/saphelp_crm50/helpdata/en/5b/e4f53911cac83ce10000000a114084/frameset.htm

Changes to a Role are not Reflected

I have created a role with one BSP iView and assigned the role to a user. When the user logs in he can see that iView. Then I have added three more BSP iViews to the role. But these new BSP iViews are not visible to the user. The user had logged off and logged on again. I have deleted the role assignment to the user and then reassigned. Nothing is working. Can someone tell me what could be the problem? I will assign points to helpful posts.

probablly you may not clear the cache, just clear the cache and check it out.
to clear cache go to system administration -> navigation -> navigation cache.

Role are not effected to user

Similar Messages

Maybe you are looking for