Role created in ERM is not appearing in CUP request for assignment-GRC 10.0

Hi,
We are on GRC 10.0 - SP5
We have created a role in ERM and it was succesfully created in backend system. However when we tried to assign the same role using CUP request - the role is not appearing.
1) Do we need to upload roles for CUP in GRC 10.0 (similar to 5.3) to populate. Will the role doesnot automatically appears in GRC database for CUP as it is created through ERM?
2) If the roles are imported in ERM with role owner information, does the same reflects for CUP also for role owner approver assignments?
Thanks and Best Regards,
Srihari.K

Hi Sri,
Is the role status set to "production" ??
Cheers,
Diego.

Similar Messages

One CUP request for assigning role to multiple users

Hi,
We assign roles to users in production only through CUP requests.. We use GRC 5.3
Here we have a case where we need to assign one role to 60 users in production(each user may have different roles assigned in the back end) . I can raise one CUP request for all users using " multi-user" option in Copy request . But when we want to make a risk analysis , it will not show risks at user level as each user had different roles and may get different risks by adding new role.
Instead it will give risks if any for only that new role which want to assign. Our manager is not accepting as this is not giving complete picture of risks for each user when we add new role.
Please suggest me if there is any other way where I can make a risk analysis for each user when I created a CUP request for multiple users.
Or the only solution is to create 60 CUP requests ?? this would be too manual
Regards ,
jaags

Raghu,
thanks for the reply, you are right as per the audit .But suppose if it is for 200 users ,creating 200 CUP requests will be impractical right.
there should be some solution for this , because there will be many situations practically where we have to assign roles to N number of users.
Is this possible in GRC 10 ? any idea ?
Regards,
Jaags

Iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

iphone 5 I do not go out or do not appear in upgrede AirPlay for ios 7.0.4 safari browser is not smooth and too long kept out the phrase "safari can not search for too many repetitions search"

AphexTwin wrote:
- no Apple input?
Of course not. Didn't you bother to read the TOU of this forum? This is a USER TO USER technical support forum. Apple doesn't post here.

New Role does not appear in home page after assigned to a user

Hi there!
I'm new at SAP Portals.
I've created a role and assigned it to an user, but the corresponding tab does not appear in home page.
I've already changed permitions to a group that is assigned to the user.
I've seen in some posts that the role's property "Entry point" should have value "Yes", but mine is set to "No". Meanwhile, I can't change it. When I open the role and press button "Properties" nothing happens. The only way I can check role's properties is through "Delta Link tracer", but there I can't change them.
Can you help me, make the new tab (corresponding to role) happear in home page menu?
Thanks and best regards,
Vasco Brandã

Hi,
to track down you problem, you click on "properties", but you can't see the properties? They won't get loaded and therefor, you can't edit the property?
What's your portal version + SPS, which browser are you using + version (IE, FF) and how do you access the portal? IP, FQDN? Are you getting any error message in the browser?
What profile is assigned to your user? What kind of roles are you trying to modify? A new one, or a SAP pre-delivered portal role?
br,
Tobias

Event created on iPhone does not appear in iCal

When I create an event on my phone and sync, it does not appear in iCal. Events created on my laptop sync without issue. Contacts sync both ways, but calendar events do not go from the phone to the computer. I am not using MobileMe to sync, simply using the USB cable.
I have tried the following to resolve my issues:
* Make sure iTunes and iPhone are up to date
* Make sure all calendars are set to sync with iTunes
* Try different USB ports on the laptop
* Restart phone and computer
* Reset sync history in iSync and re-sync
* Follow directions in this support article: http://support.apple.com/kb/TS1627 to do a full reset of sync history and re-sync
Yet after trying all of those solutions, I still cannot sync events created on my phone to my laptop. Does anyone out there know of anything else I can try that might work?
Thank you,
Cameron

After a trip to the genius bar, I found how to solve this problem, at least for me:
0) Plug in iPhone
1) Start iCal
2) Export all calendars (File -> Export)
3) Quit iCal
4) Delete all calendars from ~/Library/Calendars
5) Start iCal
6) Import all exported calendars
7) Start iTunes, configure syncing to overwrite calendars on phone
8) Sync iPhone

PDF created in ArcView does not appear the same for all users

PDF documents created from ArcView 9.2 with the "warm front 2" symbol in it do not appear properly on some users computer displays when opened. I have a handful of users who when they view these specific PDF's the symbol appears as a series of 4's. We are using Acrobat Pro 7.0.9 and all systems are running Windows XP Pro. In the handful of users experiencing this problem we have both laptops and desktops.

Probably did not embed the fonts in the PDF. Change the settings file to print (or press) and try again.

Roles created in CUA are not distributing?

Hi,
I have configured CUA in my system between 3 clients.when am creating a user it is reflecting in the child systems but where as roles created are not reflecting in the child systems.
Even i have check in SCUM roles are maintained GLOBALLY.what may be reason....and how o check the IDOC in WE05?
Thanks in Adavance

Hello:
A CUA is a 'central user administration'.
A CUA does not cover a central role administration. Therefore you need to maintain your roles as usual, means locally in each child system of your CUA.
role assignements ot users can of course been maintained centrally in the central system.
b.rgds, Bernhard

Programmatically created calendar view does not appear on view selector menu

Hi!
I'm using the following code to create a calendar view for a list:
using (var site = new SPSite("http://localhost"))
var viewFields = new System.Collections.Specialized.StringCollection { dateStartFieldName, dateEndFieldName, titleFieldName };
var query = string.Format("<Where><DateRangesOverlap><FieldRef Name='{0}' /><FieldRef Name='{1}' /><Value Type='DateTime'><Month /></Value></DateRangesOverlap></Where>", dateStartFieldName, dateEndFieldName);
var viewData = string.Format("<FieldRef Name='{0}' Type='CalendarMonthTitle' /><FieldRef Name='{0}' Type='CalendarWeekTitle' /><FieldRef Name='' Type='CalendarWeekLocation' /><FieldRef Name='{0}' Type='CalendarDayTitle' /><FieldRef Name='' Type='CalendarDayLocation' />", titleFieldName);
var list = site.RootWeb.Lists["ESM Leaves"];
var newView = list.Views.Add("Calendar11", viewFields, query, 0, true, false, SPViewCollection.SPViewType.Calendar, false);
newView.ViewData = viewData;
newView.MobileView = true;
newView.Update();
list.Update();
My problem is that even though the view is created, it does not appear in the View links just above my list. It only appears in the drop down menu of views in the ribbon. On the contrary, if I create the view using the browser user interface (not programmatically),
the view appears in both places.
Do you have any idea why this might be happening?
Dimitris Papadimitriou, Software Development Professional

Hi papadi,
I can reproduce the issue that creating calendar view using programming method, the view isn’t shown in view selector menu, and this only happens to calendar view, html view or other views are shown in the menu.
After editing the web part, disable the selector menu, then re-enable the selector menu again, I can see the calendar view shown in the view selector menu, create a new calendar view using programming, the calendar view shows as expected.
This seems indicate there is some issue in the view selector menu display, I would suggest you to first disable the view selector menu through edit the web part properties, then create the calendar view.
Thanks,
Qiao
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Qiao Wei
TechNet Community Support

Create Item column is not appearing in the "Personalize Page"

Hi All,
I am working in R12 upgrade project.
I have to create item(Link) in a table region as per the requirement.
But that "Create Item" button rather the column is not appearing in that "Personalize Page" when I click on the Personalize Page link of the concerned page.
Can anyone please suggest Do I have to do any setup or any profile option needs to be enabled.
Thanks,
Raja Dutta

Hi,
Enable profile 'FND: Personalization Seeding Mode', clear the cache and check if this solves your problem.
--Sushant

Vendor open items not appearing in F-44 for clearing

Four line items appearing a past due in the vendor account is not appearing during clearing in F-44. The other line items are appearing. Another finding is that these four line items pertain to previous fiscal year. Is there any setting/config that is disabling these previous yearu2019s line items to appear during clearing.
Thanks for your help
Regards
Prasanna

Hi,
Yes, I do agree with Ravi's comments.
Go to F110, choose the payment run by pressing F4.
There you might see some proposal with status as Proposal created. This means proposal has been created but no postings were made against that proposal.
So choose that proposal
Now go to menu item -Edit->Proposal-Delete...
After deleting the proposal, now try F-44.
This info might help you.
Thanks,
Srinu

Acrobat X Pro Drop-down Fields Do Not Appear on Adobe Reader for iPad. Help!

Hello,
I am having a problem getting drop-down fields to appear on Adobe Reader for iPad. Basically, I need to create a form that includes drop-down fields, with the end result being a form that can be viewed and completed on an iPad, using the Adobe Reader app. Above all else, the end result needs to be viewable on an iPad.
I created a form using Acrobat X Pro within which drop-down fields work flawlessly. However, when I try to open this form on an iPad, the drop-down fields do not even appear. I have done some investigating on the Web (including these forums) and come to understand that this has to do with javascript limitations on Apple products, but have yet to discover a solution to my problem.
To summarize: does anyone know how to make drop-down fields appear in Abobe Reader for iPad app? Or, does anyone know a workaround in which I could have a drop-down menu (or something similar) in my form and have it work on Adobe Reader for iPad?
Thanks in advance for the help. I took on this project from my boss' boss, so I'd really like to get this done for him.

Hello GKaiseril,
Thanks for the reply. I experienced the issue running the most recent version of the Adobe Mobile Reader app. I'm not sure I can convince the client to use anything else, but its worth a shot.
All I need is a simple drop-down list (multiple fields in the document) with 4 options that the user can select and submit as a form. Is this something EZ Pdf reader can do? Also, is EZ Pdf Reader free? (the reason I ask is I am an Android user and do not readily have access to a iPad).
Thanks again.

New field not appearing in component configuration for standard web dypro

I'm trying to add a new column to a table in an sap web dynpro component. I've enhanced the view to add in the new column but also noticed that it's using component configuration. When I go into the approriate configuration, however, all of the existing columns are there but my new column does not appear. Is there something else I need to do to pull the new field into the configuration?
thanks,
Malcolm.

Hi Olivier
Standard object 0020 gives fields only available in standard tables MARA , MARC , MBEW, MAKT . I too faced this problem for ML based fields in accounting & costing views ( as these fields are not in MBEW they are in CKMLHD). The said Z field if it does not exist in MARC it cannot be seen through std object. U need to do a saperate recording to upload this field. I dont see any other option to my knowledge.U can up load remaing fields through the std object 0020 & create a saperate recorded LSMW only for this Z field.
regards
prasad
reward if useful

All open items are not appearing in f-44 for vendor

Hi friends,
I am unable to find all open items in f-44 to clear vendor open items.
I checked in BSIK, it has 3 line items and in FBL1N also having 3 line items.
2 line items are debit and 1 line item is cr.
Dr line items are appearing in f-44 where are Cr (Vendor cr (31) is not appearing in f-44,
Please help me.
Regards,
suresh

Halo,
one of the document might be stuck in APP run.I mean proposal run.
Regards,
Praveen R Marati

Lead time values are not appearing in the report for current year.

Hi friends,
Iam checking a report in production. where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
how can i get values in the report.
Thanks ,
VRV.

Hi,
Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
Eg: 5 Minutes + 5 Kilograms = 10
You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
Assign if helps...
Regards,
Suman

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Role created in ERM is not appearing in CUP request for assignment-GRC 10.0

Similar Messages

Maybe you are looking for