Role is not showing up in SUIM transaction

All
Z_PT_TRANS_ALL role was created for all
Display access.
When I go to SUIM
Roles -> By Transaction Assignment.
and search for roles this role is not showing up.
However, role does have the transaction in S_TCODE.
Please advise.
From,
PT.

Roles by transaction searches for roles in the menu, not roles in S_TCODE.
Use Roles by authorization values, enter S_TCODE object and the tcode in the field if you want to search for tcodes in S_TCODE.

Similar Messages

  • Creating a custom role does not show up whe creating a user

    On portal 10.1.4 I have followed the directions in 10.1.4 Oracle Server Portal Configuration Guide.section 6.1.6.9.1 Example: Defining a User Administrator Role.
    However, the newly created role does not show up when I create a new user.
    Any suggestions?

    This is a bug in 10.1.2.0.2. It works if you create the group from the directory page OID

  • Payment from the customer is not showing in the lockbox transaction.

    Hi all,
    When i execute transaction code FLB1, I could not able to find lockbox and  customer did the payment  but it was not reflected in sap.
    Payment from the customer is not showing in the lockbox transaction.
    Please suggest and gide me with solution what could be the reason  i am not awear of lockbox process.
    Regards,
    JC
    Edited by: jcnaidu on Sep 17, 2010 6:41 AM

    The messages are getting to the recipient...
    I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
    I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
    --prd54usa

  • CRM 2007 Business Role IC_AGENT not showing the whole screen

    Hi,
    I set up CRM 2007 successful for a couple of standard roles like TPM_PRO, SALESPRO and SERVICEPRO. The system is working fine. Assigning the business role IC_AGENT is showing me an uncomplete screen. The area for navigation bar, the account info, the alerts and the communication information is blank. Has somebody an idea what is wrong?
    Thanks and best wishes,
    Andreas

    Hi Prasoon,
    unfortunatly I cannot help you. It is still not working. Luckly was that CRM 2007 we were just preparing for demonstration. So at the end we showed something different.
    But next step what I would do is open an OSS message due to the fact that it is a standard role and it has to work.
    Best regards,
    Andreas

  • SAP IdM 7.2 SP6- Future dated role assignments not showing in the UI

    Hi All
    After assigning a role to an identity with a valid from date in the future it is not visible in the UI.
    I've tried to configure this in the MX_ASSIGNMENT attribute and also in task level (same attribute) but still no good.
    It only shows the current assignments. The Advanced option does not do anything.
    Is this due to SP6. Do we have to move to SP8 for this to work?
    Please advise.
    Ranjit

    Hi Steffi
    I've had success with this. I retested with the same settings (that I provided earlier) for the "change identity" task and it works fine. Then I tried the same with the "Display identity" task and it worked as well. However what I noticed with the "Display identity" task is that I actually had to choose the task rather than just look for the pending values in the initial screen - hope I'm making sense here . See below screenshots
    When I choose the task "Display identity" I get the below which is what I wanted to see in the above screen as well.
    Any ideas why I'm not able to see the pending values in the first screen (above). I have the same display task defined in MX_PERSON.
    Your thoughts please.

  • STO's are not showing up in VL10I Transaction.

    Hi Gurus,
    I have a scenario wherein the delivery has been created for the 1st line item of the STO. when we try creating the delivery for the rest of the line items in the same STO, they dont show up in the VL10I screen. Could you please help me out in sorting this.
    Note: The stock is available.
             Purchase Order is an Intercompany STO.
    Regards,
    Trishul

    Trishul,
    First review the log for the messages.  What does it say?
    Generically, anything you place in the VL10* selection screens are RESTRICTIONS, which means that these parameters will limit the number of proposals that will be displayed.  Review all screens, and eliminate any entry that does not match up with the order you seek to deliver.
    Also, check the shipping section for the customer assigned to the destination plant.  You can check this in the customer master (XD03; enter cust and Sales Ord/Dist channel, display Sales org data, select 'Shipping' tab).  See if the customer is disallowed for partial deliveries.
    Rgds,
    DB49

  • EWA reporting: Not showing User Activity and Transaction Activity

    Hello everyone!
    Got 3 systems in EWA reporting, 2 systems works fine i can see User and Transaction Activity with diagrams etc.
    But 1 of them showing User activity = 0 and no Transaction activity also.
    Any ideias to solve it?

    Hi Daniyar,
    I am also facing the same problem, can you let me know what sort of patches need to be applied to overcome this issue??
    Regards,
    BASIS.

  • Eu_role not showing up for all users in EP7

    Hi SDN,
    I have newly deployed EP7, I want all users to have EU_Role but but its not showing up even though i have added eu_role to everyone group.
    i do see eveyone group attched to all users but it does not show up eu_role to it.
    Am i missing anything in  EP7 Configuration.
    Thanks
    DK

    Hi,
    Go to everyone group and click the tab 'assign role'
    Search for the eu_role recursively(check the box recursive before search). otherwise all roles will not show up.
    Hope that helps you
    Raghu

  • Adapter Engine Not Showing up in SXI_CACHE

    Hi,
    The adapter Engine is not showing up in the Transaction SXI_CACHE and also when i create a RFC comm channel it is not showing up in the Adapter Engine Dropdown.Can anyone let me know whether these both are linked and is there any way to rectify the same ?
    Regards,
    Kittu.

    Hi Kittu,
    try restarting the J2EE Engine. This should register the AE with the SLD.
    If that does not work then check there are not SLD inconsistencies,
    i.e.,
    <b>#764176</b>  Error in XI due to inconsistent SLD contents
    If that does not help try calling the <b>FM - SAI_AE_DETAILS_GET</b>
    <i>e.g.</i>
    TCODE
      <b>SE37</b>
    SAI_AE_DETAILS_GET
    <b> Import parameters                  Value</b>
    AE_NAME                             AF.<SID>.<IS Hostname>
    BYPASSING_CACHE              X
    The result should be something like
    <b>Export parameters               Value</b>
    AE_MSG_URL                      http://<IS Hostname>:<J2EE port>/MessagingSystem/receive/AFW/XI
    IS_SERVICE_USER_NAME            XIISUSER
    IS_SERVICE_USER_PASSWORD       
    WAS_CACHED
    and the <b>AE</b> should be listed in
    TCODE
       <b>SXI_CACHE
        -> GoTo AE Cache</b>

  • ARA does not show Violations in a role though conflicting transaction codes are assigned???

    Hi,
    I have noticed that a role having conflicting transaction codes assigned in the back end system is not propelry analyzed and in ARA application. When this role is analyzed, "No Violations" message is shown though there are conflicing transaction codes assigned.
    As far risk definitaion is concerned, conflicting actions are properly defined in respective conflicting actions and thse actions are grouped in a risk, which is applicable to a logical group (which in turn has the connector included causing this problem) and they are active.
    Rule are properly generated for the all the risks and functions. However, at the time of running risk analysis for this role, ARA is not showing as risk.
    May any one please advise on this?
    Regards,
    Rehan

    Neeraj,
    Now I have defined SAP_R3_LG logical group as "SAP" connector type and regenerated all the rules. Still it is showing no violations!
    Below are the screens for your reference:
    Can you please advise?
    Regards,
    Rhn

  • Transactional Iviews are not showing ( with out super admin role assigned )

    Please any solutions for the fallowing.
    First Problem
    I am not able to create the user from portal directly. Its showing the fallowing error.
    An error occurred in the persistence; contact your system administrator.
    so i had created the users in WAS by SU01.
    Second
    We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
    If u dont mine Please provide with me the steps to fallow
    Third
    i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
    Its showing the error
    Could not able to look up the system.
    And the problem with user mapping also .
    For aministrator its working fine .and for a general end user ( created on WAS )
    i am not able to provide user mapping. Its showing
    There are no systems available for user mapping for the selected principal
    wat could be the problem ?
    Your solutions will be appreciated .please urgent

    Hi Pratap,
    Second Problem
    If the Portal user name and R/3 user are the same then no problem other wise you have to do user mapping
    Third Problem
    Check the permissions. Right click the system object and give permissions for all
    Create an alias for the system object for doing user mapping
    First Problem
    Try creating user from http://<portalserver>:50000/useradmin
    Regards
    Arun

  • Pop-up screen not showing while accessing transactions in SAP CRM WEB-UI

    When we are logging on SAP CRM WEB UI, for transactions like Lead, Complaints and Activities-
    Sometimes Pop up screen is showing for selecting transaction types, but sometimes it is not showing.
    We have tried it on different work stations with same user id and standard business roles , but we are not able to trace the problem. Also with same id sometimes error shows, "No business roles attached, not allowed to logon,
    after that when we tried on other workstation with same id we were able to access all transactions.
    Please suggest what would be the problem. 
    Rishikesh

    This is sporadically occurring issue hence I cannot pin point one single reason. Since sometimes you are able to logon and some time not certainly it could not be a Role authorization issue.
    Just check if your business role is properly configured. Thats all i can say.
    Regards
    Kavindra

  • Transferred Roles not showing up  in WP3R

    Hi All,
              I have a BI 7.0 System which is connected with EP 7.0.
    I uploaded few roles from the BI System in the portal and made some changes to the uploaded role.
    Then i transferred these roles back to BI System from the portal using role transfer utility of EP.
    The report i get in the portal is showing that the roles are perfectly transferred with all the services.
    Now when i go to BI System to generate the authorization role and corresponding profile using TCode WP3R,
    i get the message 'No Matching Data Found' when i execute first option 'Maintain Roles ........'.
    All the system object and rfc destination are maintained properly and there is no problem with the connectivity between BI and EP.
    Is there anything else i need to do for wp3r to read the transferred roles from the portal??
    Regards,
    Azalina

    Hi Thaker,
    did you generated the role
    you have added any transactions or added manuall objects
    try in SUIM Role>>by role name>>give the role name and execute then click on transaction assignment
    hope this helps
    thanks
    kishore

  • Some Software Component Versions do not show up in transaction sproxy

    I have a landscape with a CRM system, a PI system (with the SLD on it) and some other systems.
    In transaction sproxy in the CRM system the Software Component Version SAP CRM ABAP 7.0 shows up, but others that should be there like SAP ABA 7.01 are not there.
    So I went on the SLD and edited the technical system for the CRM system, I added the product SAP CRM 7.00 and set the checkmark for installed for the relevant SWCVs like SAP ABA 7.01.
    I then went to the business system for the relevant CRM client and there also checked those SWCVs.
    But still they do not show up in transaction sproxy in the CRM system.
    What am I missing?

    Hi Monika,
    There's several suggestions that you could look at to help resolve your problem in this thread:
    [Can't find  ESA ECC-SE 603 SWCV;
    Regards, Trevor

  • Transaction MD04 does not show all open sales/orders deliverys

    Hi,
    Transaction MD04 does not show all open deliverys and sales orders for plant 0705 and certain materials.
    Can anyone tell me the reason for this?
    Regards,
    Brijesh

    Hi
    Run SDRQCR21 report in Transaction SE38 for that material it will  resolve your issue.
    Please confirm
    Amit

Maybe you are looking for

  • How to delete multiple contacts in iphone 5s

    Is there an easy way to delet multiple contacts on iphone 5s annd 5c. I can delete them one at a time, but wondered if theres a way to do some of them but not all.

  • Daughter's iPod touch 4th gen is stuck in recovery mode, won't turn on after I restore it, please help...

    My daughters iPod touch 4th gen is STUCK. Somehow it was disabled because of too many password attempts (my younger daughter was pushing numbers). I connected it to iTunes, did the press and hold power button + home button, then let go of sleep butto

  • Logical database PNPCE

    Hi   I have created a custom OM infotype 9910 which will data with Object ID either 'O' (Org Unit) or S (Position) . I am using Logical database PNPCE in my report. I have declared the infotype at the declaration part with infotypes 9910 statement Wh

  • BI : Diagnostic and support desk tool

    Hello I'm currently using BI7.0 SP9 and the support desk tool version 0.370. I have a current red light that i'm not able to solve : URLs Prefixes Customized on Both J2EE and ABAP Side and the  long text is : The URL for ABAP customizing table RSPOR_

  • Basic question on multiple views

    Just getting started in the world of cocoa, objective-c, etc. and have basically started by building a very basic app and slowly adding things to that app (however arbitrary and seemingly useless) to teach myself new things. I initially started with