Role iView doesnt show up

Hi!
I have a peculiar problem...I created an iView, a page for the iView and a workset for the page. Then I created a role, assigned the workset to the role and finally assigned the role to a user.
However when I log in as the user, I dont see the page/iView. In fact I see nothing at all. Giving the user "eu_role" brings up the normal "Home" workset but assigning him to my role shows absolutely nothing. I see the portal desktop and stuff (everything default). The only role I want to assign to him is my role but the page/iView doesnt show up.
Any ideas?
Sameer

Hi,
strange thing, in my desparation I restarted the whole server and now everything is working right. The user can see the role and the page...
Bye
Sameer

Similar Messages

Management report doesnt show violations at user level.

Dear all,
I have a problem that the management report in 5.3 SP04 doesnt show violations at user level. At role level it works fine.
I've tried full sync and generated a new management report. The problem remains.
No. of Users Analyzed 859
Users with no Violations 859 100%
Users with Violations 0 0%
Number of Roles Analyzed 2,986
Roles with no Violations 2,510 84%
Roles with Violations 476 16%

Hi Vit,
Follow both the notes mentioned by Sahad. Check the data in virsa_cc_prmvl table. Run the following script and see if you can see any data:
select * from virsa_cc_prmvl where genobjtp=1
If you don't have any data then there was some issue with user analysis so you will have to run the analysis again. If there is data then run the management report again and you should see the data.
Regards,
Alpesh

Query assigned to role. Doesnt execute when try to execute from under role

Hi Experts,
We have some queries assigned to a role in PFCG.
Now the anomaly is as follows:
some of the queries that are assigned, do not show any technical names in the Bex role window. When we click on these queries under this role, nothing happens. no execution, nothing.
The same queries if executed from under the Infoareas->infoprovider->query path, execute correctly.
This would point to incorrect assignments in PFCG, BUT thats not the case.
<bsp_protcl>://<bsp_server>/sap/bw/BEx?sap-language=<language>&bsplanguage=EN&cmd=ldoc&INFOCUBE=Z1&QUERY=ZQ1
<bsp_protcl>://<bsp_server>/sap/bw/BEx?sap-language=<language>&bsplanguage=EN&cmd=ldoc&INFOCUBE=Z2&QUERY=ZQ2
The details of the query assignments to the role are as above.
Query ZQ1 shows in Bex role with a technical name and executes properly.
Query ZQ2 doesn't show a technical name under that role in Bex and doesnt execute.
Also if I execute ZQ2 from the PFCG, it executes correctly.
What are we missing here?
All help appreciated!

The query name is correct. The assignment seems to be correct too.
But for this particular assignment, the bex role doesnt show a technical name for the query. neither does the query execute.
Why don't the assignment via PFCG work?
Edited by: CC on May 22, 2008 6:04 PM

Create navigation iviews to show differents documents from the same folder

Does any body knows how can i create navigations iviews that show differents documents from the same folder? This is my situation i have a folder that include documents for diferents countries, i want create a navigation iview that show only the documents for Canada from this folder.

The only other option is to give user access using taxonomy. But it seems like a lot of extra work to keep documents in the same directory. anyway, here is the overview of steps:
1. create index (SA > System Configuration > Knowledge Mgmnt > Index Administration)
2. create categories within the taxonomy.
3. define Query on each category. (Content Management > Classification > Taxonomy Query Builder)
4. create property: property namespace, property group. (SA > System Configuration > Knowledge Mgmnt > Content Mgmnt > Global Services > Property Metadata)
5. <b>assign props to the docs.</b>
6. Schedule the crawler to create classification index.
7. classify docs so that docs actually go recide in the categories
<b>8. Create role, page and KM Navigation iViews for end user to browse the taxonomy instead of going directly to the repository.</b>
9. restrict permissions on the taxonomy for different user groups.
Kumar

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help

Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario

I have purchased music on my ipod touch but it doesnt show in my itunes library on my computer.... please help

I have purchased music on my ipod touch but it doesnt show in my itunes library on my computer.... please help

azmama3 wrote:
I have purchased music on my ipod touch but it doesnt show in my itunes library on my computer.... please help
With your iPod connected to your computer and iTunes running, select your iPod form the left pane, click the File menu in top bar, from there select "transfer purchases from iPod"
Stedman

I tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer

Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W.

Ordered my iphone 6 plus from atnt on september 29 when will it be ship to my house but it doesnt show anything on atnt order information! what should i do? please answer my question!

ordered my iphone 6 plus from atnt on september 29 when will it be ship to my house but it doesnt show anything on atnt order information! what should i do?
the truth is that i order my iphone 6 plus on september 26 from atnt store and on site but my credit card was declined
so i tried it the next day but it works but from atnt site doesnt show anything(it only show my order on iphone 6 plus just like the last time)
when will it say your order has been shipped?
when will it be ship to my house?
and also im going to use atnt next on iphone 6 plus
please answer my question!

This is a user to user technical support forum. We can't possibly answer your question.

HELP !! My iPod keeps freezing i can go on it for about 10 secs then it freezes, i have to keep restarting it and it doesnt show up on itunes when i try to restart it please HELP

I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL

- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!

If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes

Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly

Just disconnecting it without ejecting should not cause permanent damage. It may cause data corruption, if iTunes was in the process of syncing at the time. But iTunes should still see the shuffle and (maybe) tell you to Restore it.
Is it possible that the "accident" damaged the USB cable?
Make sure you have done this on the shuffle since the problem occurred
http://support.apple.com/kb/HT1655
And you should also shut down (power off) the computer, if you have not already.
Have you tried more than one USB port on the computer (not a hub if you use one)? You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
If those things do not help, what version of Windows do you use?

HT5925 when I connect my Ipod touch it doesnt show on my itunes screen

my ipod doesnt show on my itunes screen when I plug it

Hello alexglvn,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Best of luck,
Mario

My iphone wont turn on, the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes

my iphone wont turn on. the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes. what do i do?

http://support.apple.com/kb/ht1808

IPod shows up under my computer, but doesnt show up in iTunes

When i plug in the iPod, a window pops up showing the folders contained on the iPod, but the iPod doesnt show up in iTunes.

here is a place to start
iTunes Does Not Recognize Your iPod

Role iView doesnt show up

Similar Messages

Maybe you are looking for