Role not appearing in TLN for a particular user in portal

Hello All,
We are working on Federated Portal Network. We are facing problem where a user is not able to view a particular role assigned to him in Top Level Navigation in consumer portal. There are many users assigned to the same role and for them its visible. This problem is arising for this particular user only.
Steps we took to resolve the issue are:
1)Unassigned and then again reassigned the role to the user.
2)Cleared the consumer cache.
3)User tried to login from another machine but still found the same issue, so local machine settings are ruled out.
Suggest some solution.
Regards,
Priyanka Singh

Hi,
Give the enduser permissions to that user for that role and check.
Regards
Basha

Similar Messages

How to disable Transactional Iview for a particular user in portal

Hi Experts,
I have a scenario
i have created a user group for all the employees and assigned all the transactional roles to it, now the issue is they wanted to disable the Transactional Iview to particular user for a certain period and enable it later on, how is it possible?
As per my knowledge we have to assign that particular Role individually to all the user, instead of user group and make the iview invisible when required.
Instead of this is there any other Easy Method that i can approach the issue easily?
Thanks Inadvance
Siva

Hi Siva,
You can have two types of groups: one Group with users having access to transactional iview and another devoid of this access.
You can assign users to group with transactional role and vice versa. By the way of user groups, we will have more control over the transaction role access.
Regards,
Ganesh N

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

Resp Person Tab is not coming in CJ20N for a particular project type

Hi All,
I am unaware of the standard SAP screen in CJ20N but we have a screen in CJ20n wherein we can assign a person / link a person this particular tab is not coming at all for a particular project type (Resp Person) rather a different tab (cust enhancement) is coming but our problem is we have a mass program which works on BDC and hence if the required screens are not there it fails.
Can someone please tell me if there is come config i can check/ maintain for this resp person tab so that it starts coming for all project types.
Regards
Anmol Pareek

Hey Sarang,
Thanks a lot, it was helpful, one more thing though, In Resp Persons tab there is something called Link Employees and my problem is that i have a mass linking program (using BDC) which cannot work if i dont see that screen in my BDC (without changing BDC). The way you have told is in OPUK/ OPUJ check for proj type and see if person responsible is hidden or not. I dont think that is what i am asking because no matter what this person responsible is hidden, but for certain project types Resp Person tab itself is not coming and that is the problem.
Regards
anmol

HT201240 This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I

This process does not appear to work for me. I'm running 10.8.3. I created a new user for a guest staying with me. They have gone now and I am attempting to either change the password or delete the user. It won't allow me to choose the user I created. I am logged in as myself and it states that I am an "Admin". The user I'm attempting to change is listed as a "standard" user and there is a white checkmark inside an orange circular background on the user pic in the list of users.
Can someone help me? I am having a hard time believing that OSx will allow me to create users and allow them use of my computer and it's drives, yet it will not allow me to change the password so I can monitor what they might have been doing while logged on? What if this were my child? This guest left under sketchy circumstances, and I'd really like to be able to ensure they were not using my computer to do illegal things or to have illegal communications.
Any help would be appreciated. (It's odd that it was so simple to "create" a user and set a password for them.......but it's complicated or a little known process to reverse.
Thanks.

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

Monitoring info not appearing in console for one of the managed server

Monitoring info not appearing in console for one of the managed server though server is running fine. It happens some times. I tried to get these info from executruntimeMBean, but that is also not returning any info for that server. The entry for that server get erased from running-managed-server.xml after some time. Any idea why?

hi Arun,
Please find the below diagnostic module config fom the condig.xml
<server-diagnostic-config>
<data-retirement-enabled>true</data-retirement-enabled>
<wldf-data-retirement-by-age>
<name>DomainHealth_WLDFRetirePolicy_m2ap5</name>
<enabled>true</enabled>
<archive-name>HarvestedDataArchive</archive-name>
<retirement-time>2</retirement-time>
<retirement-period>6</retirement-period>
<retirement-age>1</retirement-age>
</wldf-data-retirement-by-age>
</server-diagnostic-config>
This configuration was present earlier also, but it looks like the logs statrted accumulating recently due to some other changes made to console. There is nothing coming under the WLDF console extension in server admin console.
Other than changing the start script, will it be fine to go the file location ./server/data/store/diagnostics/WLSDIAGNOSTIC**.DAT and delete the older file while the server is running now?
Incase not posisible , an example on the change in startscript and the config.xml will b helpful
thanks
JZWL

TS3716 iPod classic does not appear in iTunes for Mac since updating to 11.0.

iPod classic does not appear in iTunes for Mac since updating to 11.0. It appears on the desktop and iTunes starts up when the iPod is connected, but it does not appear in a form so that I can manage its contents.

Mike:
Just had the very same problem. iPod Classic shows up on my desktop but not in iTunes (11.0.1). I tried restarting iPod while connected as suggested elsewhere. Didn't work. What did seem to work however was, while the iPod is connected (and on the desktop) restart iTunes. Once it restarted it was there and synching. I also, before restart, made sure that auto-synching was set up in iTunes preferences (under devices).
Try this. May work for you as well.

Ship-To Address not getting picked for one particular user

Hi SRM Gurus,
I am working on SRM5.0 system with ECC6.0 as backend.
For one particular SRM user, the Ship-To address number which has been maintained in his attributes through transaction PPOMA_BBP, as default delivery address, is not populated when he creates a SC.
This default ship-to address is not seen while creating the cart even though the address can be found via the F4 search help in the same SC.
Can anyone tell me why this is happening for one particular user?
Please note that this problem is occuring even when the user is shopping for self and creating a new SC (no copying from template). So SAP note 1055203 is not valid in my case.
I have checked the ADRC table, and this address number exists. Infact, when I assign this address number to some other user's Ship-To attribute, this default delivery address is picked in the SC.
So, I understand that the problem is not with the address, but with the linking of this address number to this user. I even tried deleting and re-assigning the address number in the attribute to this user. But, it doesnot work still.
Can anyone help me out?
Thanks n Regards,
Ancy

Ship to address not being picked from attributes for any user it was being picked from Org address data , and I had reset the value
now , when I am trying to create a SC and I have tried to add delivery address bby 2 types .
1. By adding through the portal
2> i have tried to add the same throgh ppomabbp in user attributes "Delivery address"
I have also made it default however when I raise the SC it again shows me as blank :
I am not too sure how do I populate the value that I need . Please see below still the delivery address is blank !!

Unable to see a column of a table in portal for a particular User

Hi,
A particular user is unable to see a particular column of a table in the portal . The application is developed in Webdynpro ABAP. The table contains two columns. Both the columns contain text type fields. What appears to the user is that the left column has disappeared and the right hand column has shifted to the left.
This is occuring for a particular user only. We have checked in our development and quality systems but we are unable to replicate the issue. Please help.
Thanks and regards,
Satya.

Hi Vikas.
You can use BAPI in LSMW to craete Material or You can use direct input method. Both methods as follows below:
Using BAPI in LSMW:
First maintain IDOC Inbound Processing steps by giving PORT and Partner Type and Partner Numberby clicking 'settings' icon in menu path in LSMW Screen.
Adn then execute LSMW and maintain the values as below in the first step.
BusinessObject Method(BAPI)
Business Object       BUS1001006                      Standard material
Method                     SAVEDATA                        Create and change materia
Message Type         MATMAS_BAPI                   Create and change materia
Basic Type               MATMAS_BAPI03               Create and Change Materia.
For the selecting of views, you can maintain fields for all views(From Basic view to costing view) in your excel and populate with 'X' in respective fields for activating views.
In the 6th step (Maintain field mapping and conversion rules). you can map those fields for views which you want to activate since we have all views are in the standard structure.
Using Direct Input Method:
Standard Batch/Direct Input
Object                      0020                                             Material master
Method                     0000
Program Name          RMDATIND
Program Type           D                                                  Direct Input
For the selecting of views, you can maintain fields for all views(From Basic view to costing view) in your excel and populate with 'X' in respective fields for activating views.
In the 6th step (Maintain field mapping and conversion rules). you can map those fields for views which you want to activate since we have all views are in the standard structure.

How do I set a particular view in STUDIO record browser for a particular user?

How do I set a particular view in the Studio record browser for a particular user?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

RE: Acls for a particular users

Hi,
I want to get a list of Acls for a particular users. Can anyone tell me how
to achieve this. I am using the RDBMS Realm Implementation.
After user logs in, I want to present the user with a list of applications
that the user is authorized. To do this, I need to get a list of Acls for
this user. I tried to implement a method in the DefaultRealmExtender which
gets all the Acls and then checks for permission "execute". This works fine
when the jsp is displayed, but if I leave the browser for a while and then
refresh the page, the entire weblogic shuts down. After debugging, I found
out that it blows up when it tries to check the permission. Any help will be
appreciated.
Thanks,
Gajendra Sanil

Hi VB,
Thanks for your response. But the applicant is still active for some of the Vacancies. I can't delete that person.
We can do this from the applicant from. NAv: Vacancies--> Applicants--> select the rejected applicants--> In the application tab there is one field called " Reconsider Applicant" If you select the reason you will be able to consider that applicant for that same vacancy but in the applicant tab i am not finding the reason field only for this applicant. I think this applicant perform some different step while he is with drewn the applicantion.
Joshna.

Changing language for a particular user

Hi
How to change language for a particular user in backend system ?
Actually i have to get logon language en but automatically it is coming "DE". That is the reason even single sign-on is not wrking from portal for particular user all other users are getting "EN" by default.
Please give the solution for this issue.
it is very urgent.
Thanks and Regards,
Phanikumar.

You can set the logon language in System>user priofile>own data

Table decimal value display is incorrect for a particular user

Hi,
In my VC table value display is showing like .00. Before decimal point values are not coming. I have put disply as 2 decimal. It is hapanning for a particular user. Other users are getting right value. Even we logged on different machine also. please suggest me.
Regards
Rama

Hi,
what is the user's language in his profile and what is the formate of the your field chcek it in the properties of it.
Regards,
Govindu

Query to return all SQL statements ran for a particular user.

Good Morning,
Is it possible to find all the SQL statements run for a particular user using the v$ views? I can do it it 10g however I am currently using 9i and the query below does not work.
select a.username,a.logon_time,b.sql_fulltext
from v$session a,v$sqlarea b
where a.sql_id=b.sql_id
and a.username='USER'
order by a.logon_time descI assume some columns in these views do not exist in 9i. The release of 9 I am using is 9.2.0.1.0.
You help is much appreciated.
Thanks,
Mark.

Dear Mark!
I suggest you to use auditing instead of v$sqlarea. Oracle Onlinedocumentation says the following about v$sqlarea:
>
V$SQLAREA lists statistics on shared SQL area and contains one row per SQL string. It provides statistics on SQL statements that are in memory, parsed, and ready for execution.
>
That means that you'll get only those SQL-Statements that are currently in memory. Older statements which are already deleted from memory are not visible for your query.
By the way if you simply want to know what is wrong with your query then please post your errormessage.
Yours sincerely
Florian W.
Edited by: Florian W. on 29.07.2009 12:03

Role not appearing in TLN for a particular user in portal

Similar Messages

Maybe you are looking for