Role of business system in SLD

I am doing PI post configuration with Central SLD on solution manager.What should be the Role of the business system for solution manager?In sxmb_adm should I give this as application system? And what should be the corresponding integration server?

Hi,
it should be application and should be connected to PI as any other R3 application system. If you connect it ti PI, then enter the PI destination as explained in the PI configuration guide, section connection to other business systems.
If you are not using PI, then it is not relevant - you should leave both fields empty
regards,
jaime

Similar Messages

Business System in SLD

Do I have to create each system as businass system into SLD?
Is it possible to work with business system (in Integration Directory) that not exist into SLD?

You have to use 2 services (Business system in SLD for application system).
Business System for role as Integration server has to be there.
Not to confuse you more you will have 3 business system in SLD.
2 for the target and source system as a role of application syetem and one for XI integration server.
Hope it helps,
Cheers,
Satish

Role for business system defined in SXMS_CONF_ITEMS'

hi
in RWB integration engine status is red in detail it is showing.
'No role for business system defined in SXMS_CONF_ITEMS'.
how can i fix this.
regards,
krushi

HI
Runtime Workbench - Integration Engine
Are the Roles in SXMS_CONF_ITEMS and the SLD Consistent?
//***The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
extract taken from this thread
http://help.sap.com/saphelp_nw04s/helpdata/en/a5/1b5342d8a7be30e10000000a155106/frameset.htm
Message was edited by:
Anusha Ramsiva

No role for business system defined in SXMS_CONF_ITEMS

Hi Experts.
I have the following problem. We were set up the XI in our company and now we are trying to configure and run it propertly. We had some problems so far and now there is the next one: I configured the simple scenario FILE-XI-FILE but it doesn't work :(. Every step from the scenario was completed successfully (after some problems) but when I have started runtime Workbench (RWB) in order to monitor the functionality of XI and I choosed Component Monitoring | Components | Integration Server | Integration Engine GPI I see that I have an error in Self-Test Status | Are roles in SXML_CONF_ITEMS and SLD consistent? In detail it's No role for business system defined in SXMS_CONF_ITEMS. My business and technical systems look to be well configured but now I'm hopeless because I can't find nothing more specific about SXMS_CONF_ITEMS table. I tried some notes and threads from the forum but nothing helped me after all. So please help if someone has an experience with something similar. Any help will be appreciated. Thanks
Ondrej

Hi,
The role of a business system is defined centrally in the SLD. However, you can overwrite this setting locally in the table SXMS_CONF_ITEMS.
This test checks whether the role descriptions are consistent. If not, the locally defined role is used at runtime.
Check in transaction SXMB_ADM -> integration engine configuration a parameter (Corresponding Integ. Server) if all parameters are correct n not lost.
refer : http://help.sap.com/saphelp_nw04/helpdata/en/a5/1b5342d8a7be30e10000000a155106/content.htm
Runtime Workbench - Integration Engine
http://help.sap.com/saphelp_nw04s/helpdata/en/70/58b43be7492354e10000000a114084/frameset.htm
Regards
Aashish Sinha
PS : reward points if helpful

Problem with business systems in SLD

Hey guys
i m doing a IDOC to file scenario and m creating two business systems in SLD
the first one uses the logical system name of the R/3 server and has been configured as WAS ABAP.
when i try to create the second one as a third party using the logical system name i defined in BD54(on R/3 server),i get the error sayin that a business system already exist with the logical system name.
i do have one businees system which is using the same logical system but that has been configured as WAS ABAP.
cant i assign two different business names to same logical systems?
thanx
ahmad
Message was edited by:
Ahmad

Hey
thanx ,now when i try to use the same business system name for the R/3 server in the second scenaario,i dont see the business system in ID,i did cache refresh,
also just want to make sure
i have configured my SLD as under for the first scenario
created two business system,first one is using the logical system name of the R/3 server configured as WAS ABAP and the second one is configured as third paarty and using the logical system name created in BD54.
do these setting looks good to u?
now can i use both these business system in my second IDOC to File scenariio?
thanx
ahmad

Error while deleting the business system in SLD

HI
I am trying to delete the business system in SLD and encountering the following error .
if some one has any idea as to why is this error occuring
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:361) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:128) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:330) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:341) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:297) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:706) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:660) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:228) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:152) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Thanks
Nikhil

hi Nikhil,
Null pointer errors are difficult to correct as is
If you have imported the BS from some other system make sure the BS has been imported correctly without errors & any Tech systems attached to it exist.
sachin.

Logical Sys Name for Business system in SLD for Third Party

Hi !!
I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
thanks
Gowri

Hi Gowri,
sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
Regards,
Udo

Renaming Business System in SLD?

Hello All,
I'm wondering if there exists an Option to rename a Business System inside SLD. It should be renamed in Receiver Determination, etc. on the Integration Builder as well.
In SLD I could rename a BS with "Administration/Content Maintenance". But what happens to the Directory if I would do so?
Does anybody have any experiences with that?
Regards,
Marc

Hi Sarvesh,
using the configurator in the Integration Directory will save some time. After reimporting the Business System you let the configurator reconfigure receiver determinates, interface determinations and so on.
Regards
Thomas

Need to include the R/3 Business system in SLD.

Now i need to include the R/3 Business system in SLD.
To do that i have to establish an RFC connection, could anyone guid me what type of RFC connection i need to use like HTTP connection or else other..... Get me the details.

The distribution, participation in distributing or otherwise sending of this material is against the law. The material you are requesting is copyrighted material and available ONLY to customers of SAP. If you need such documents from the SAP Service Marketplace then you must have "S" user ID and login yourself to retrieve this material. If you do not have a "S" user ID then you should contact your own internal company groups responsible and request one or request them to retrieve the document for you.
By participating and sending such documents you are at risk for legal action and a removal of your account here on SDN and BPX.
DO NOT send material via email such as this! Further actions will result in officials within your company and your SAP Sales Account being notified and could result in legal action against you as an individual.

How to Configure Business System in SLD (SAP-XI).

Hi all,
I am new to XI. I want to know the detail scenario of configuring Business system in SLD(System Landscape Directory) in SAP-XI.
Can , anyone help me on this...

hi suresh,
gothrogh this below liks ..........
http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/7b/d4653fd1d3b81ae10000000a114084/content.htm
http://wiki.sdn.sap.com/wiki/display/XI/WorkingwithSystemLandscapeDirectory+(SLD)
regards,
kesava

How to Remove Business System From SLD

Hi Experts,
I Created Business System For Web As ABAP.
While Removing Business System From SLD Means I am Getting the Following Error.
java.lang.NullPointerException at com.sap.sld.wd.businesssystem.BusinessSystem.removeXIIntegrationServer(BusinessSystem.java:497) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystem.removeXIIntegrationServer(InternalBusinessSystem.java:474) at com.sap.sld.wd.businesssystem.BusinessSystemMainView.RemoveOk(BusinessSystemMainView.java:450) at com.sap.sld.wd.businesssystem.wdp.InternalBusinessSystemMainView.wdInvokeEventHandler(InternalBusinessSystemMainView.java:477) at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87) at com.sap.tc.webdynpro.clientserver.event.CustomEventProcessor.handleServerEvent(CustomEventProcessor.java:45) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleServiceEvent(WindowPhaseModel.java:362) at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:129) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344) at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processPhaseLoop(WebDynproWindow.java:355) at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:152) at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659) at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227) at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56) at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47) at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Please Let me know How to Remove it from SLD.
Regards
Khanna

HI Khanna
Delete the Business System in your IR and ID, if any interfaces are developed under this BS.
See if any items in locked state...and also after deleting it...activate it and refresh the cache. this shud help
If you deleted from everywhere then it should not give that message.
Try after refresh cache using SXI_CACHE.
Finally Delete the BS from SLD
In general , that to be you are facing this type of problem only inthis situation , then you have to refresh SLD cache.
See the below link
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
Cheers..
Vasu
** Reward Points if found useful **

Configure Role of Business System " as Central Integration Server , PI

Hi Experts,
I am running transaction code IDX5 in my xi system it is showing as "system is not a central integration server unable to start the program ".In SXMB_ADM role of business system need to configured .If we need to configure how to do this .
Regards
Praveen

Hi Praveen,
For configuration of integration server please go to SXMB_ADM>In configuration choose Integration engine configuration->And add one runtime parameter IS_URL...and specify the role of business system as Integration server and specify the corresponding Integration server i.e dest://httpdestination. This destination is RFC destination that should be created in PI sytem of type 'H 'which contains the target host as host name of PI system and path prefix as '/sap/xi/engine?type=entry'.
Thanks & Regards,
Priyanka Anagani

The Business-System from SLD canu00B4t read

Hello,
during export from an configuration object folloging exception occure:
"The Business-System from SLD can´t read"
It seams all OK ...
Thanks in advance,
Frank

Did you change the name of the Business System in the past? Then you need to keep the old Business System name in the SLD, as during exporting and importing of configuration objects the history of the objects is checked as well.
Regards
Stefan

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

How to create Business System in SLD with Role "Integration Server"

Hi,
We were trying to create a Business system of role "Integration Server" in SLD. However, we are getting an error saying "There is already an Integration Server defined foer the selected Technical System. Select as Application System."
We could not find any relevant BS with the role "Integration Server" for that Technical System.
Please advice.
Warm Regards,
Bhaswar

hmm
I have same situation on a fresh installation.
Also error "There is already an integration server defined for the selected technical system; select the Application System role".
But, there is no Business system at all visible and also the Business system tab of the technical system is completely empty.
What to do?
BR Patrik

Role of business system in SLD

Similar Messages

Maybe you are looking for