Role of old released transport after configuring charm

I want to configure charm 7.1 in solution manager 7.1 SP10 .how can i include released(old ) transports after charm configuration? please share your ideas about this.Thanks in advance

Hi
Only hostname/ipaddress and SID name will be changed for solution manager. So for solution manager back RFC in ECC and EP systems you need to change hostname/ipaddress and instance number.
From SMSY try to update/read ECC and EP systems data. Check it is working fine or not.
Suman

Similar Messages

Unable to release Transport request in CHARM

Hi all,
After Setting up CHARM,created a Transport request,while releasing it thru CHARM gives error:"Release of system Q11 Could not be determined"
rgds,
rajesh
Message was edited by: rajesh
Rajesh M

Dear Rajesh,
1.Did you released the Task of the request in satellite system?
2.What error you get when you check inside the task list of that correction.
Please give inputs,which will help us in solving the issue faster.
Thanks and Regards,
Avinash.

Releasing transport requests with job roles take forever after upgrading to Netweaver 7

Dear experts,
Some time ago we've out SAP ECC 5 system to ECC 6. Since then, it takes a very long time to release transport requests containing job roles.
For example, a request containing 154 job roles (1 template and 153 derived roles) took 4 hours to release in our DEV system. Before the upgrade this only took a couple of minutes.
Afterwards, the import in our QAS and PRD system don't take longer than normal.
Apparently this time is taken by the Export phase:
Checks at Operating System Level
17.04.2014 09:50:03
(0) Successfully Completed
Pre-Export Methods
17.04.2014 09:50:37
(0) Successfully Completed
Export
17.04.2014 13:51:02
(0) Successfully Completed
Does anyone know what causes this and how to solve?
Kind regards,
Nicolas

Hello Nicolas,
What I understood from your description is that ,it takes very long time to release the job. Once it is released, execution does not take much time.
To me it seems to be background job/work process issue. Maybe all the background work process are busy to execute current jobs and no free work process available for the jobs which are in the queue. In that case, if possible try to increase number of bg work processes.
Check for any performance issues during that period. Check if there is any locking issue and jobs are stuck because of that.
Hope this helps to investigate the issue
Regards,
Archana

ChaRM: Error while releasing transport

Hi Team,
I have configured ChaRM in Sol Man (Sol Man 7.0 EHP1, SP24). When i try to release transport thro ChaRM, i am getting below error.
No valid TM target found. Message number:/RTC/TMM00154
Your valuable inputs required
Thanks
Kumar

Hello,
Perhaps you would like to review this [guide|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000089860&_SCENARIO=01100035870000000112&_OBJECT=011000358700000657692007E]
Regards,
Paul

CHaRM-Handling old transport request before CHARM was activated.

Hi All,
Recently i just activated CHARM in solman-SM1 for new a project implementation. This CHARM was setup in in such a way that it tie to one of the local IMG project EPROJ in developmemnt-DEV. Now i have one concern and that is those transport requests where created before i activated CHARM.
These old transport requests were crerated directly in DEV without project assigned. Therefore, we tried to assign IMG project EPROJ (the same IMG project setup in CHARM) into those old transport request manually.
Problem : When i tried to perform released step in CHARM tasklist it says that "No transport request found"
Question : How do i make CHARM to pickup those old transport requests?
Really appreciate your feedback as there are a lots of old transport request which needed.
Thank you.

Hi,
If you use Change Request Management, you should always use Change Request Management means to create transport requests; that is, create transport requests in a change transaction or in the task list.
Manually registered transport requests can be assigned to a task list only, not to a change transaction. If you use change transactions ,,,,the system does not take into account transport requests that you added manually.
This note is what you want
Note 1150426 - Registering transport requests in ChaRM
Hope it solve ur problem completely.
Regards
Prakhar

ChaRM: Release transport Error

Hi Team,
I have configured ChaRM in my Sol Man system (EHP1, SP24). When i try to release the transport request in Sol Man, i ma getting below error:
Error RFC destination SM_GDDCLNT300_TMW: Screen output without connection to user.
In SM59, both connection test & Authorization test is OK.
Your valuable input will be very much appreciated....
Thanks
Kumar

Hi All,
If i execute this RFC in SM59 (Connection Test & Authorization Test) in Sol Man system, it is OK. But when i try to release the transport request thro Sol MAn using the action "Release Transport Request", i am seeing this error in task list.
How this RFC can fail during transport request release, even it is working SM59?
Need your advise...
Thanks
Kumar

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

How to install and configure ms exchange server 2007 both role hub and edge transport role in one network

Hi,
Edge role is design for perimeter networks, to keep security risks minimum. So it’s not recommended to have edge role in internal network. Must have separate network or subnet for edge services.
If you are playing around it in labs, then you can put edge role within same subnet as other exchange roles and no specific requirements in that case.
Thanks.
MachPanel - Premium Cloud Automation Solution

PROBLEM IN RELEASING TRANSPORT REQUEST THROUGH SE10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

hi
vicky just went through your Query regarding release
of requests..first of all U be sure of TMS configuration
see whether it is consistent or not.then after Refresh
the system and then come to release of requests.
its true that we can transport through scc1 but first
check about STMS configuration and the way you set
that.
Regards
manjula.

Releasing Transport task from either schedule manager or change request

Hi Gurus,
I had a doubt regarding releasing of tasks of a transport request.
Is there any way where I can release a task along with the transport request in the Correction transaction itself?
Or is it a standard behavior of SAP Solman process where in I have to login to the Satellite system , do the configuration and then release the task from se10 t-code and then finally release the transports.
Require ur expertise on this point.
Regards,
Anubhav

Hi Anubhav.
Manually releasing the task in the satellite system (using SE10)
prior to releasing the transport request in CHARM is a SAP standard process for CHARM in SOLMAN.
I think SAP made it this way as a precaution in case there are several task included in the transport request
(assigned to different developers). Manually releasing your task means that your confirming that
you have completely applied your modifications and ready for import into the test system.
If this process is included as an automated process along with the releasing of transport request in CHARM,
you may mistakenly release another person's task which may not be ready for import yet.
I hope this helps.
Regards,
Tess

Urgent Correction: Release transport request (transport is red)

Hello!
Has some one experience to solve the problem bellow:
By an urgent correction it is not possible to release transport. In the field "Task" I can see a red point that not allow to proceed.
If I release the transport manually in the satelite syytem, without CharM, my import runs with error:
AGR_1016 table class is 'C'. Entries are only imported to client '000'.
AGR_1016B table class is 'C'. Entries are only imported to client '000'.
AGR_PROF table class is 'C'. Entries are only imported to client '000'.
AGR_USERT table class is 'C'. Entries are only imported to client '000'.
AGR_TIMEB table class is 'C'. Entries are only imported to client '000'.
Main import
End date and time : 20071115141115
Ended with return code: ===> 8 <===
The question is:
I would like to copy some existing role to cutomer's namespace Z... save the rolle and transport the role via CharM.
Is it usual to get the error I get?
Thank you very much!
regards
Thom

Hi Liza:
You cannot delete released transport requests.
Don't import them into QAS or PROD.
If you already imported them, then your only option is to delete the Objects manually in DEV, capture the deletes in a new request and transport th enew one.
As you know if you released a request, you can ignore it without moving it anywhere.
Ram Chamarty
Message was edited by: Ram Chamarty

Need help in configuring CHARM with R/3 System landscape with seven systems

Hi All,
we are planning to configure CHARM for our R/3 landscape.our current STMS includes seven systems.in the current STMS the transports flow as below.
D20->C20->C21->C22->C23->T20->P20
we require the transports to move in the same way as stated above even after CHARM is configured
1.please let me know if we can configure CHARM with seven systems.
2.if yes, how would the import happen( ie Action for import appears for all systems?).
Regards,
Anand Reddy

HI andy,
the transports will move in the following order.
D20(DEV)->C20(Consolidation)->C21(integ)->C22(reg)->C23(unit)->T20(final test)->P20(production)
transport will start in D20,then imported C20 followed by C21,C22,C23,T20 imports and finally reach P20
the systems are not in parallel they are one behind the other
Anand Reddy

PO Release strategy workflow configuration

Hi All,
I am doing PO release strategy workflow configuration in PFTC, Please tell me in this which all configurations come in workbench transport request and which all come in automatic transport request.
Please guide me
Thanks in advance
Pavan

The PR WS00000038 standard Workflow is very simple, you don't have to create a new one, it works, the think is that you need to make some configs in the SPRO
spro
Material Management/Purchaising/Purchase Requisition/ Release Procedure / Procedure With Clasification / Set up procedure with classification/ Workflow
In this config you need to add the: Release Group / release code / object type( US for user id's) / and the User. You have to add one line for each release code that you configured in your release strategies.
After that you have to review the linkage table Tcode: SWETYPV, find the object type BUS2105 and activate the linkage for the event releaseStepCreated, in this you will see the WS00000038.
Now you can start to testing the notifications in the inbox(SBWP) for the configured users using the me51 tcode.

Anybody use Transport Copies using CHaRM

Hi
Did anybody use transport copies options in CHaRM? When I use it's displaying only the transport created using CHaRM. But I need the transport created outside CHaRM?
By the time configured CHaRM, developer already working on the development system and created quite bit of Transport requests. Now wants to include all those transport request into CHaRM created transport request.
Looking for 2 options.
1) Register Transport Requests
2) Transport Copies
Tried both are not working. If any otherway please suggest.
Thanks
Ava

Hi,
The option 'Register Transport Requests' will only link the outside transports to the maintenance cycle. You can't work on these transports through a Correction Document (such as Normal Correction ).
In case you have already created transports outside of chaRM and these transports are not yet released you can do the following:
1. Create a Change Request and Correction Document
2. Create a transport request from this correction document
3. In the development system to go to se09 and use the option 'Merge Requests' (and not include objects). This will delete the previous request and move all your objects to the request created through chaRM (and you will not run into any lock issues).
4. For the transports which are released you can use the 'Include Objects' option.
The transport of Copies functionality when used from within ChaRM will create a copy of your original transport and move it to the QAS system. It will not load the production buffer. In case you find any issues while testing in QAS, you can still go back in DEV and add changes to te original transport request. This way all your work gets added to the same TR and you can keep doing transport of copies for testing in QAS. Once your are ready you can release your original TR.
Thanks,
Kriti Bhalla.

Not able to login after configuring SSH.Please reply

i have configured AAA on Cisco aeronet 1400 series wireless bridge (AIR-BR1410A-A-K9).After configuring i am not able to login to the device via telnet and via putty.Soon after enabling SSH i am not able to login even through SSH.The below are the commands i have configured on the device.I used to configure the same commands on my Cisco Switches also.
Layer -2
ip domain-name NETS
crypto key generate rsa general-keys modulus 1024
ip ssh version 2
aaa new-model
aaa authentication login Login-LAN group tacacs+ line
aaa authentication enable default group tacacs+ enable
aaa accounting exec EXEC-LAN-L2 start-stop group tacacs+
aaa accounting commands 1 Level-1-LAN-L2 start-stop group tacacs+
aaa accounting commands 15 Level-15-LAN-L2 start-stop group tacacs+
tacacs-server host 10.254.0.140 key !n01#zh3r3@|2
line vty 0 4
accounting commands 1 Level-1-LAN-L2
accounting commands 15 Level-15-LAN-L2
accounting exec EXEC-LAN-L2
login authentication Login-LAN
transport input ssh

Hi,
Check out the connectivity between cisco aeronet and TACAS server and what is the failed logs says in tacas server.
If possible try to change the configuration to aaa authentication login Login-LAN(default) group tacacs+ line and then try what exactly happens.
Hope that helps
Regards
Ganesh.H

Unable to release transport request because of control program tp

I have create a customized transaction type as a copy of urgent correction SDHF. I am not able to release the transport requests using the action in the toolbox 'Release Transport Request' and I obtain the following error in the log:
could not start transport control program tp
But if I directly execute the task 'Release Transport Request' in the task list, it works.
Another strange thing is that at the beginning both ways worked, but after some days I started to have this problem.
Thanks
Antonello

I did not find any note about this error.
Someone can help me?
Thanks.
Antonello

Role of old released transport after configuring charm

Similar Messages

Maybe you are looking for