Role, Page and Application names

Hi,
I have a role name SMS_Sales, pgSales and WD Application SMS_Main. XXX_Sales contains pgSales and pgSales contains SMS_Main. On assigning the role to the user he sees,
1. SMS_Sales
2. pgSales
3. pgSales (again)
4. SMS_Main
I would like the user instead to see the following:
1. Sales
2. nothing (but the tab should be visible)
3. Should vanish
4. Main
In short no prefixes (SMS_)....only when displaying any idea how that can be achieved. Prefix are actually needed for the project mainitainece. Hereby the screenshot:[Layout|http://img392.imageshack.us/img392/3379/titlewa5.jpg]
Many thanks,
Dharmi
Edited by: Dharmi Tanna on Apr 2, 2008 11:09 AM

Hello,
Can somebody please respond?
Regards,
Dharmi

Similar Messages

Change "Services and applications" names in failover cluster manager

Hi. Id like to change "Services and applications" names in failover cluster manager for Windows Server 2008 R2.
I right click on one and press rename, but when i change the name and press enter i get the message "To rename this service or application please rename the Client Access Point via its property page"
It's important that we don't change the network name for the service

Hi,
Checkout this blog post
PowerShell for Failover Clustering: Let’s Rename a Few Things
But keep in mind if you rename the resources and you are using them in a script or backup you need to check this also with the new name.
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

How to transport roles, pages and iViews in the PCD from DEV to QA

Hi
Please would someone telll me how I can transport/move roles, pages and iViews we have created in our own area of the Portal Content Directory from our Development to our QA portal environment.
Kind Regards
Claire

Hi,
Please check help.sap.com.
http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm
Your Basis/NetWeaver consultants can help you.
Regards,
Masa

SSIS - pass variables to Data Manager for Appset and Application name

Hi folks,
I'm building an SSIS package, and I can't work out how to set the Appset and Application names in the Convert Task item - I have created the item, and the variables, but I can't work out how to reference the two.
Any tips or help greatly appreciated - this is one of the worst-documented pieces of software I've ever seen!
Thanks,
Jason

Hi,
Please refer to the other SSIS packages already created. We need not set these parameters while creating the SSIS package. When we link the SSIS to DM package, we can dynamically send the appset name and the application names.
Hope this helps.

This.name and application.name different?

Hello,
how come that, within the application.cfc file, this.name and application.name are different?
Shouldn't this.name be inherited by the application? Isn't that confusing?
Thanks for clarification

If I recall correctly, you use this.name to set your application name in Application.cfc, and Application.applicationName to read it in other files. Application.name is just a variable you've created in the Application scope.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

How to change table name after creating page and application

Hi HTMLDB Team,
i have created a application with page where the region use master detail form with table name emp.Now after developing the page and the application i want to change the table from emp to emp2 where emp2 is the table with same structure of existing emp and same field properties.How can i edit the table as emp2 ?
Thanks in advance,
Cheers,
koushik

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

CR for VS, MSSQL, ConnectionInfo and "Application Name" in connection string

I'm using Crystal Reports for Visual Studio 2013, latest version. I'm using the web CrystalReportViewer component. I'm setting the connection information, something like this:
var tables = rpt.Database.Tables;
foreach (Table table in tables)
    var tableLogonInfo = table.LogOnInfo;
    tableLogonInfo.ConnectionInfo = connectionInfo;
    table.ApplyLogOnInfo(tableLogonInfo);
When the connection to the database is opened, the "Application Name" (which you can see with sp_who2 in MS SQL Server) is "Internet Information Services". I'd like it to be something else, like the name of my website or something similar. If I could specify the exact connection string, I could do this by including "Application Name=MyWebSite" in the connection string, but of course that isn't possible (right?).
Does anyone know of a way to set the CrystalReportViewer's connection's Application Name?
Thanks.
Dan

The name of the physical executable that created the connection is (generally) automatically used to populate the PROGRAM column of the V$SESSION table.
If you want a more human-readable application name or if you have multiple applications in the same application server, you can use the DBMS_APPLICATION_INFO package to set the CLIENT_INFO, MODULE, and ACTION columns of V$SESSION for this particular session once you've created your connection.
Justin

Is it possible to export and import jsf page and application module?

Hi,
I want to export a application module and then import it to another application,so deos jsf pages.If I can do this ,then my team could do the diffent work at the same time.one group response for data model then commit as application module,one group for page create and edit and so on .Who has any good idea?
Thanks advance
lixinzhu
2007/09/19

hi,frank
thank you.
You know a page include a .jspx file,a page definition file and depend faces-config.xml,faces-config.oxd_faces and other I don't know information,so if i only put the first two file into cvs,but how can i get other information in the last two file?When I get the first two file and needed information in the other file,how can i merge these into new project and let jdeveloper "reconize it"?Applicaion is more complex,it not only depend its self java class,xml and many entity object and view object,how to handle the "export" and "import" process?Just like oracle form,only a fmb is enough,database object only need to "put into database","export" and "import" are very simple,so i need jdeveloper to supply these "import" and "export" function.I'm not familar with cvs,does it can know object dependency like application module?if it can,how to let jdev "reconize" imported in object?
lixinzhu
2007/09/19

Contact page and Version name question

When making a contact sheet, is it possible to just have the image number under each photo and NOT the words "Version Name"?
Thanks.

I'm trying to find out whether this is possible as well. It's annoying having "Version Name" print out on something I'd like to show a client!

Split PDF, name odd pages and name even pages in sequence

I need help creating a script to ask the user for a PDF file then do the following:
-Extract even pages and rename name with "_Front#" ending where "#" is a number sequence starting with 1.
→ ex: the PDF I choose when prompted is "anatomyBook". The extracted even pages would be:
     - anatomyBook_Front1, anatomyBook_Front2, anatomyBook_Front3,...
-Extract odd pages and name them similarly except replace "Front" with "Back"
Thanks for the help!

Ok, I have solved some issues I found with the previous script and Automator configuration.
The Filter Finder Items action apparently uses kMDItemKind to determine the file type, and if you choose a PDF file without an extension, this action will not pass the file to the Bash script. Result: 0.
The mdls command, for the same reason will always fail to get a page count when it encounters a extensionless PDF file.
Remove the entire mdls/egrep command sequence from the script.
Wrote a shell function that runs Python, imports the CoreGraphics module, and returns the page count for PDF files with/out extensions. The function takes as its argument, the input PDF filename, which it passes into Python as a command-line argument ($1). It returns a page count.
Replace entire Bash script in Automator with the following code.
New Bash Script
#!/bin/bash
# Requirement: Install Skim PDF reader
# Location: http://skim-app.sourceforge.net
# Usage: progname.sh sample.pdf
# Author: VikingOSX, August 2014, Apple Support Community
function PDFpagecnt () {
/usr/bin/python -c \
"import sys
from CoreGraphics import *
pdfdoc = sys.argv[1]
provider = CGDataProviderCreateWithFilename(pdfdoc)
pdf = CGPDFDocumentCreateWithProvider(provider)
print('{}'.format(pdf.getNumberOfPages()))" "${1}"
function ASDialog () {
`osascript <<-AppleScript
    set pdfFile to "${1}"
    set evens to "${2}"
    set odds to "${3}"
    set msg to ""
    set msg to msg & "PDF Processed: " & pdfFile & return
    set msg to msg & "Front Pages: " & tab & evens & return
    set msg to msg & "Back Pages: " & tab & odds
    tell application "System Events"
        display dialog msg with title "Processing Complete" giving up after 20
    end tell
    return quit
AppleScript`
skimPDF="/Applications/Skim.app/Contents/SharedSupport/skimpdf"
pdfFile="$@"
basename="${pdfFile%.*}"
even=1
odd=1
pagecnt=$(PDFpagecnt "${pdfFile}")
for mypdf in "$@"
do
    for page in $(seq 1 $pagecnt)
    do
        if [[ $((page % 2)) == 0 ]]; then
            #even extractions
            `${skimPDF} extract "${pdfFile}" "${basename}""_Front"$((even)) -page ${page}`
            ((++even))
        else
            #odd extractions
            `${skimPDF} extract "${pdfFile}" "${basename}""_Back"$((odd)) -page ${page}`
            ((++odd))
        fi
    done
done
ASDialog "${pdfFile}" $((--even)) $((--odd))
exit 0

Getting application Name

Hi Experts,
I have PCD path of portal page. Can I get application path(the full path with project path and application name) of the application that portal page is holding?
Regards,
Gopal

Hi Gopal,
Check this [thread|how do i retrieve the url for external window;
It may be useful to you.
regards,
Siva

Obnoxious file and path names (help!)

How can I construct a regular site, that doesn't involve having my file names being danscool_website.html and having the url name in each file. I hate it.

It would be better to tell people what it is you do want, perhaps with an example.
If you want your file names to be different than the page and site names you yourself set in the Inspector, then you would need to edit the html by hand each time after publishing. If this is really important to you, it may be best to use another web creation app which gives you that option.
I'm not sure what you mean by "having the url name in each file". I've seen some people inflict ugly path names on themselves by naming their site inside the iWeb app the same as their personal domain name. The fix for that is to name the site something short and simple like "1" instead.
If you can provide your url or be more specific, more ideas may be fortcoming.

How to get the Application name/fullpath in a servlet deployed in WebLogic

Hi ,
Just like we can get the domain root directory from weblogic.management.DomainDir
String root = DomainDir.getRootDir() ;and domain name from weblogic.management.configuration.DomainMBean
DomainMBean domainMBean = MBeanUtils.getDomainMBean();
String domainName = domainMBean.getName() ;How can i get , the application name in which the servlet is deployed from inside the same servlet ? Which API from weblogic provides that information ?
for eg : application path = Middleware/user_projects/domains/Domain_1/servers/AdminServer/upload/webapp1.war
and application name = webapp1.war
Edited by: Tom on Mar 31, 2011 9:32 PM

Not sure about Weblogic Specific API however you can use Java API.
public void init(ServletConfig config) throws ServletException {
          // TODO Auto-generated method stub
          System.out.println(config.getServletContext().getRealPath(""));
          System.out.println(config.getServletContext().getContextPath());
output:
C:\Documents and Settings\user\KEDB\KEDBRISKIT\WebContent --- Application Path
/KEDBRISKIT --- Application Name
-Akshay

OIM11g R2 - If two roles (ACF2 and AD) are selected together for a user req

Hi ,
We are facing a problem In the Catalog, if two roles (ACF2 and AD) are selected together for a user and checking it out.The request goes to approval process.We have not created any approval process flow.
Plz let me know how to recover from it and provide an option to provision two roles simulaneously to a user without going into approval process.
Steps to Reproduce:
1. Create a user in OIM .
2. Search that user.Administration->Users->Search User
3. Click on 'Roles' tab and select 'Request Role' under that tab.
4.'Catalog' tab opens .Click on Search icon and Add AD and ACF2 Role to the cart.
5. Click on 'Check out'
6. Click on Submit button
7. Request Summary tab opens with Request status shown as 'Obtaining Request Approval' and Request Type as 'Assign Roles'.
Note: If we assign AD and ACF2 individually to user and running Evaluate User Policies we are able to see account in Provisioned state under Accounts tab of User and request is not going to approval process
Thanks in advance

Hi,
As mentioned I created two auto approval policies
1. Request Type= Assign Roles
Level= Request Level
Auto Approval checked
Approval Rule=Requester.UserLogin Equals XELSYSADM
(Created this rule as i am logeed in as XELSYSADM)
2. Request Type= Assign Roles
Level= Operation Level
Auto Approval checked
All Scope Checked
Approval Rule=Request.RequestType Equals Assign Roles
After that i opened the user request role page and requested 2 roles (AD and ACF2).
But now also request went to approval work flow
Please point which step i have missed or any other step need to be performed.
Regards,
Edited by: Puneet Lobana on Jan 7, 2013 12:54 AM

How to display name and display name of the role during request

Hi,
Is it possibe to display Role Name and Role Display Name on the "Select Roles" page during ROle Request for Others? In the "Roles Available" I can only see "Role Display Name". I was trying to look at "AssignRolesDataSet.xml" but was unable set what I need (for exmaple lookup-query...). How to achieve desired funcionality?
Best
mp

Hi,
I should implement your same funcionality, but looking for a solution I didn't find any useful suggestion.
Did you find the solution?
Thanks in advice
Daniele

Role, Page and Application names

Similar Messages

Maybe you are looking for