Role Type in Partner role
Hi,
I'm creating a partner role for Plant & S.Loc.
I selected a role type
For the role type when I select transport system (F4) getting msg "no values".
I have a transport system created.
Pls help me in solving this.
Hi
Please enter correct transport system you created by copy pest from O4TV transaction ...
Similar Messages
-
Partner Role not coming when creating the Vendor Master
Hi all
There is a standrd role AZ.
There is a standrd Partner Determination procedure L1.
The role AZ is assigned to the Partner Determination procedure L1.
When creating the vendor master in MK01 the role is not coming in the list of partner function.
For Document types there is a standard shema 0002.
The role AZ has also been assigned to doc type.
What can be the reason.
Is the assignment against doc type at all required.
Please suggest.
RegardsThe procedure for setting partner functions:
Step 1
Vendor Account Group
IMG->LOGISTICS GENERAL->BUSINESS PARTNER->VENDOR->CONTROL ->DEFINE
ACCOUNT GROUPS AND FIELD SELECTION
Step 2
Defining Partner Schemas
IMG->MATERIALS MANAGEMENT->PURCHASING->PARTNER -> DETERMINATION -
>PARNER SETTINGS IN VENDOR MASTER RECORD
->DEFINE PARTNER SCHEMAS
Step 3
Assign Partner Schema
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION->PARTNER
SETTINGS IN VENDOR MASTER RECORD->DEFINE PARTNER SCHEMA
« THEN ASSIGN PARTNER SCHEMA
Step 4
Define Permissible Partner Role Per Account Group
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION -
>PARTNER ROLES ->DEFINE PERMISSION PARTNER ROLES
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION -
>PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION
PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Once you have this configuration then you change your vendor in easy access menu (XK02-select partner function) define the partner roles. -
Confusing definition of My and Partner Role in PartnerLinks
Assume I create two BPEL processes: One producer and one consumer
Each of them needs a JMS adapter as partner services.
When I click in the producer BPEL process on the JMS adapter definition
then I have to specify:
Partner Link Type=Produce_Message_plt
Partner Role=Produce_Message_role
My role=not specified
When I click in the consumer BPEL process on the JMS adapter definition
then I have to specify:
Partner Link Type=Consume_Message_plt
Partner Role=not specified
My role=Consume_Message_role
The relationship between "My role" and "Partner role" is somehow asymetric and confusing.
at a first glance I would have said before: The view is always from the BPEL process side.
But why do I have to specify NO "My role" in the producer ?
When I try to specify "My role" as "Produce_Message_role" and leave
"Partner role" as not specified then I get errors.
Can somehow explain me what the logic behind should be ?
PeterYou need to look at it from a message type perspective. Is the message you are calling async, or sync
If the process is sync you need to specify both, this is calling a sync partner link.
PartnerRole=Invoke
MyRole=Receive
Async can be tricky. When you call a async Partner Link, e.g. JMS Adpater you typically only one operation exists.
PartnerRole=Invoke
You are telling the partner to use the Invoke operation.
Async can be fire and forget or you may want to wait for a response so you have to implement a Receive activity. In this case you are the consumer and there is no Partner Role operation
MyRole=Receive
So to keep it simple
Sync Invoke activity = Both
Async Invoke activity = PartnerRole
Async Receive activity = MyRole
cheers
James -
i have created a vendor .now how can we define partner roles to this vendor
Procedure for Setting Partner Functions
The procedure for setting partner functions:
Step 1
Vendor Account Group
IMG->LOGISTICS GENERAL->BUSINESS PARTNER->VENDOR->CONTROL ->DEFINE
ACCOUNT GROUPS AND FIELD SELECTION
Step 2
Defining Partner Schemas
IMG->MATERIALS MANAGEMENT->PURCHASING->PARTNER -> DETERMINATION -
>PARNER SETTINGS IN VENDOR MASTER RECORD
->DEFINE PARTNER SCHEMAS
Step 3
Assign Partner Schema
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION->PARTNER
SETTINGS IN VENDOR MASTER RECORD->DEFINE PARTNER SCHEMA
u201E« THEN ASSIGN PARTNER SCHEMA
Step 4
Define Permissible Partner Role Per Account Group
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER DETERMINATION -
>PARTNER ROLES ->DEFINE PERMISSION PARTNER ROLES
If you want a partner schema for your own document type then define your partner schema and assign to document type using the below mentioned path.
IMG->MATERIAL MANAGEMENT->PURCHASING->PARTNER ->DETERMINATION -
>PARTNER SETTINGS IN PURCHASING DOCUMENTS ->DEFINE PERMISSION
PARTNER SCHEMAS
And then
ASSIGN PARTNER SCHEMAS TO DOCUMENT TYPE
Once you have this configuration then you change your vendor in easy access menu (XK02-select partner function) define the partner roles.
Regards,
Indranil -
Hi all,
When i creating out line agreement, contract with respect to vendor and when i try to save the contract I am getting the following message, wat needs to be done to avoid this.
Following mandatory roles missing in partner maintenance: PI
Message no. ME366
Diagnosis
In partner schema (partner determination procedure) 0001, which is assigned to the purchasing document type, certain partner roles (partner functions) are marked as mandatory. However, the following roles have not been maintained in the current document: PI.
Procedure
Maintain the missing mandatory roles on the partner screen.
Note
You can also maintain the missing mandatory roles in the vendor master record in order not to receive this message again in the future.
Thanks
Vijay
Edited by: Vijay on Dec 3, 2010 3:40 PMHi Sridhar,
I can see the customizing that "Define Partner Schemas" - 0002 = PI marked check box for Mandatory & Higher Levels. The other check box are as not checked.
Please feedback.
Thanks
Ram -
Hi Gurus
We have two Business Roles and one Business Partner Role
This Business Partner Role we assigned to Two Business Roles so In one business Role Business Partner Role all tabs will work but in other business Role same Business Partner Role some tabs he donu2019t open because he donu2019t have permutation to open those tab
Ex: we have ABC Sold-to-party and we have xyz Business Role and also 123 Business Role
If I use xyz Business Role all tabs will open in ABC Sold-to-party
But if I open 123 Business Role some tabs ware not opening in ABC Sold-to-party In Web Client
So for this what Configurations we have do
Please Guide me how to Configure
Thanks in Advance
ShettyThank you for your Quick Response
My Quotation is
we created one ABC Sold-to-Party
so i have TWO Business Roles
Mahesh is one Business Role
Ramesh is one Business Role
if i am log in through Mahesh Business Role in my Accounts ABC Sold-to-Party in this Business Partner Role Category i will see all Tabs
But when i am log in throughRamesh Business Role in my Accounts ABC Sold-to-Party in this Business Partner Role Category i will see Some Tabs only
so for this scenario what are the configurantion we have do
Please Guide me
Thanks in Advance
Shetty -
Difference between partner role & partner function
hi all
what is the differnce between partner role & partner function ?
Please elaborate with examples.
KiranHi,
Partner function
Partner functions are terms that describe the people and organizations with whom you do business, and who are therefore involved in transactions. For example, when you create an activity, based on Customizing settings, it automatically includes the partner functions Activity Partner, Contact Person, and Person Responsible.
BP Roles
A business partner role is used to classify a business partner in business terms. The roles you assign to a business partner reflect the functions it has and the business transactions in which it is likely to be involved.
Regards
Srinu -
Partner role and document type.
Hi,
how can I link partner role to document type?
The problem is that for some documents type in POs creation
is not possible see in partner view (header) any partner.
The same happens in printing, I've to select the partner manually.
The inforecord exists.
How can I solve the above problem?
Best regardsGo to SPRO-MM-Purchaisng-Partner determination-Partner Settings in Purchasing Documents
here u can do all the settings -
Hi Guys
This one is from Traders' and Schedulers' Workbench from IS Oil and Gas Downstream.
I need to know whether we can create new partner role types (e.g. TSW011, TSW011, etc). The partner role types are maintained in table OIJRRT but I could not find a transaction to maintain this table.
Do I need to create the entries in the table directly? Will the system allow me? Has anybody tried this earlier?
Also, can anybody tell me what is the significance of Role differentiator type and how can we use it?
Many thanks in advance for all your time on this.
KartikTS W as a standard has some partner roles, which can be assined to the TSW location or Transport system.
e.g. Carrier
Shipper
Supplier
Supplier in pipe
Receiver
Receiver in pipe
Consignee
Tanker
Inspector
Breakout S/L locational
Your partner role can be either of the following SAP entities : Vendor, Customer, Plant , Plant + SLoc
At a physical location, you can have multiple suppliers. In SAP, they are created as Vendors, and assigned to the TSW location as the 'Supplier' partner role. Another vendor may be assigned the 'Carrier' partner role at the location. Similary, a Plant can be assigned as a 'Supplier' partner role.
The same applies to Customers or Plant which can act as a 'Receiver' partner role at a diferent TSW location.
Once you have set-up the partners for the location, this data is used as a validating and defaluting source in the TSW documents. -
Where can I create Partner Role type (TSW003-supplier) for TSW
HI IS OIL Expertise,
Where can I create Partner Role type (TSW003-supplier) for TSW?
Because while creating partner role @T Code: O4TQ @ Role Assignment” TSW003-supplier” not available on drop-down list.
please do needful on this.
Thanks
ChandraHello Chandrasekhar
As you know that Partner Role is -
"The master data record of a partner role is used to define a business partner. The partner role includes information about the activities that the business partner can carry out and where the business partner carries out these activities. Stock-holding objects, such as plants and storage locations can also be defined as partner roles."
According to your screen shot and question, you want to define the TSW003 which only shown when you enter Vendor code in initial screen i.e. O4TQ.
Thanks
Yogesh -
Meaning of Partner Link Type, Partner Role, My Role
hi,
I am unable to get clearity about below terms, please explain me what does it means, I have also read developers guide.
Most of the time these values automatically gets selected but if I try to change it, I get confused
1.) Partner Link Type : Refers to the external service with which the BPEL process is to interface
2.) Partner Role : Refers to the role of the external source
3.) My Role : Refers to role of the BPEL process in this interaction
please explain with some example.
thanks
YatanProper outbound plug configuration solves the issue. Object to be used should be BP_ACCOUNT
-
hello friends
In which table i can get business partner roles .
I know about BUT100
i want Business Partner Roles like (sold_to_party,ship_to_party,bill_to_party)Hi,
Though the requirement is not crystal clear, hope following solution meet your requirement ,
you can use following table
1) Enter your transaction number in object_id in table CRMD_ORDERADM_H
2) get guid from above table and pass it into CRMD_LINK
3) Get the set guid from CRMD_LINK and pass it into table CRMD_PARTNER
So you will get all the partners in transaction,
regards,
PD
Reward points if it helps...... -
Business Partner Role Specific Field View in WebClient
Hello to everyone,
I have a question that really needs a answer. We are upgrading from SAP CRM v4 to SAP CRM v7.0 and as such we have a number of custom Business Partner Roles within the Person BP Type. Against these custom roles we have developed custom field and tabs in order to separate the content within the BP Role further.
After rolling off an implementation of SAP CRM v6.0 [2007], the following seems apparent:
- Assignment of Roles is done via an assignment block in the Customer Maintenance view.
- You can create Business Partners in different roles initially.
- You cannot maintain Business Partner details in specific roles
However, you cannot display the role specific fields as you can in the WinClient. As an example, a Citizen Role BP will have different fields to that of a Teacher, but these roles could be assigned to one Business Partner.
There does not seem to be any guidance as to how this is managed in the WebClient and as it seems a fundamental part fo the SAP CRM offering, you would have thought that this questions has been asked, but I have found no answers.
I really hope anyone can help and appreciate any time and effort put into solving my question.
Many Thanks,
MatFlat.Hi MatFlat,
Yes, your observation is right - in the Web UI, fiel grouping is not implemented for roles. This is because the role concept is quite different between SAP Gui and Web UI.
In SAP gui, (CRM 4.0) roles had a functional meaning as well as a UI control. However, the concept was changed with Web UI. Now, roles have only a functional meaning, and no effect on the UI at all.
If you want to implement role based field grouping in Web UI, you need to define your own methods in the implementation class.
E.g : you can write code to influence the field properties based on the roles. I guess you can redefine the DO_PREPARE_OUTPUT methods of the impl class.
In order to get info about which roles the BP is maintained , you can use FM BUPA_ROLES_GET_2.
Hope this helps you.
Cheers,
Rishu. -
Problem in Creating a Business Partner Role
Hi Frns,
I am trying to create a BP Role from CAC->SAP Business Partner->Business Partner->Business partner Roles->Define BP Roles.
I copied BUP003 and given my BP Role name as ZEmp.
When i try to save it, it is giving an error message saying
"NO STANDARD ASSIGNMENT DEFINED FOR BP ROLE CATEGORY BBP003".
I have checked in BBP003 Category in the same.
What could be the problem?
Thanks in Advance
RohanHi Roshan,
You have Created a BP Role,
You must also have assgned the Same to a BP Role Category Check the Settings for BP Role Category Assignment and when Appropriate you shall Assign Std Assignment of BP Role Category to your BP Role by Selecting the Check Box
Referal Notes:
BP Role Category
Attribute of a BP role.
Use
The role category makes it possible for SAP and customer programs to program on the BP role.
Dependencies
The role category depends on a differentiation type.
Any number of BP roles can be assigned to a role category, with one role always acting as the standard role per role category.
It is possible to control the update of a role by assigning a role category to a role.
Hope it Anwers your Queries..
Thanks and Regards,
RK. -
Creation of partner roles for customer master
Hello,
when I try to create one or more partner roles while creating a customer with IDOC DEBMAS basic type DEBMAS06 I get the error message:
No customer ID found for partner .
The required fields PARVW and KUNN2 are filled with valid values.
Can anybody help ?
Regards
AlexHi Alex,
Could you specify what error message you are getting?
Thanks!
Rudra
Maybe you are looking for
-
FOP - PDF open in same window, not as a pop-up
Hello, all, I have a report that is transformed into a pdf in a new window when I click the 'output to pdf' link (all created by following the PDF tutorial). I also found a way to make that PDF appear in the new window when the report page loads, thr
-
I-Tunes freezes every time I open it
I just bought the update for 2.0 for my iPod touch. It works great initially until I plug it into my laptop (which has been running 7.7 for a week or so fine). Itunes opened and then immediatly freezed and was not responding. I tried to install 7.7 o
-
How can I delete all duplicate frames in a clip?
I'm working with footage captured from a game engine on a Mac. When the graphics processing get's intense the graphics card struggles to keep up. What ends up happening is that the card continues to output every frame (e.g., it does not skip frames
-
Connecting to a database through the Proxy using JDBC
Hi, I am working on core java. I want to established connection to remote database(I am working on local network behind the proxy) how can i do this using core java thanks in advance regards Man479
-
Anyone can explain this program to me?
import java.util.List; import java.util.LinkedList; import java.util.Iterator; public class Lab_02 public static List getLinesOfText(int m) { List lines = new LinkedList(); StringBuffer line = new StringBuffer(); fo