Role Upload - Could not perform action

Gurus,
I am attempting to upload a sampling of R/3 ECC 6.0 roles into the portal (EP6). I have the system connection defined and testing successfully. I unfortunately can not execute the upload function. After defining the selections that I wish to upload, in this case a role, I receive the red exclamation mark followed by "Could not perform action. Check the role migration log for additional information"
I also have not been able to locate this migration log. I have searched here and sap's help portal for the location of this log but to no avail. Any assistance will be greatly appreciated.

Hi Mike,
usually you are able do drill down this information further more.
If you do not know which file to check look in the defaultTrace.<no>.log for more information. There will be a hint to dive in much deeper.
On the page where you get this message there is a tab "Log Viewer" please have a look at this to get more information.
Best regards,
Michael

Similar Messages

  • Win 8.1 sfc /scannow returns Windows Resource Protection could not perform the requested operation.

    I am running Windows 8.1 Pro.
    I have been experiencing problems that lead me to believe the my component store is corrupted.
    When I run sfc /scannow sfc immediately comes back with "Windows Resource Protection could not perform the required operation.
    Here are the entries in the CBS file
     TI: --- Initializing Trusted Installer ---
    2014-01-21 10:45:59, Info                  CBS    TI: Last boot time: 2014-01-21 10:28:05.492
    2014-01-21 10:45:59, Info                  CBS    Starting TrustedInstaller initialization.
    2014-01-21 10:45:59, Info                  CBS    Ending TrustedInstaller initialization.
    2014-01-21 10:45:59, Info                  CBS    Starting the TrustedInstaller main loop.
    2014-01-21 10:45:59, Info                  CBS    TrustedInstaller service starts successfully.
    2014-01-21 10:45:59, Info                  CBS    No startup processing required, TrustedInstaller service was not set as autostart
    2014-01-21 10:45:59, Info                  CBS    Startup processing thread terminated normally
    2014-01-21 10:45:59, Info                  CBS    Starting TiWorker initialization.
    2014-01-21 10:45:59, Info                  CBS    Ending TiWorker initialization.
    2014-01-21 10:45:59, Info                  CBS    Starting the TiWorker main loop.
    2014-01-21 10:45:59, Info                  CBS    TiWorker starts successfully.
    2014-01-21 10:45:59, Info                  CBS    TiWorker: Client requests SFP repair object.
    2014-01-21 10:45:59, Info                  CBS    Universal Time is: 2014-01-21 16:45:59.014
    2014-01-21 10:45:59, Info                  CBS    Open of SC_BOOT_SERVICING_DONE event failed 2
    2014-01-21 10:45:59, Info                  CBS    Loaded Servicing Stack v6.3.9600.16470 with Core: C:\WINDOWS\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.3.9600.16470_none_fa2491fd9b3cfcb2\cbscore.dll
    2014-01-21 10:45:59, Info                  CSI   
    00000001@2014/1/21:16:45:59.016 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa55266bda @0x7ffa55269a06 @0x7ff74300d25f @0x7ff74300dc17 @0x7ffa800d2385)
    2014-01-21 10:45:59, Info                  CBS    SQM: Initializing online with Windows opt-in: False
    2014-01-21 10:45:59, Info                  CBS    SQM: Cleaning up report files older than 10 days.
    2014-01-21 10:45:59, Info                  CBS    SQM: Requesting upload of all unsent reports.
    2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start upload with file pattern: C:\WINDOWS\servicing\sqm\*_std.sqm, flags: 0x2 [HRESULT = 0x80004005
    - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    SQM: Failed to start standard sample upload. [HRESULT = 0x80004005 - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    SQM: Queued 0 file(s) for upload with pattern: C:\WINDOWS\servicing\sqm\*_all.sqm, flags: 0x6
    2014-01-21 10:45:59, Info                  CBS    SQM: Warning: Failed to upload all unsent reports. [HRESULT = 0x80004005 - E_FAIL]
    2014-01-21 10:45:59, Info                  CBS    NonStart: Set pending store consistency check.
    2014-01-21 10:45:59, Info                  CSI   
    00000002@2014/1/21:16:45:59.020 WcpInitialize (wcp.dll version 0.0.0.6) called (stack @0x7ffa54fd5929 @0x7ffa652e7fc0 @0x7ffa652e80f2 @0x7ff74300c9a5 @0x7ff74300dc2e @0x7ffa800d2385)
    2014-01-21 10:45:59, Info                  CSI    00000003 No store version format found; DLL store format 0.0.0.6
    2014-01-21 10:45:59, Error                 CSI   
    00000004@2014/1/21:16:45:59.027 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
    (null)
    [gle=0x80004005]
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Failed to get CSI system store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CBS    CSI store consistency check fails. [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CBS    Failed to load component store [HRESULT = 0x80073712 - ERROR_SXS_COMPONENT_STORE_CORRUPT]
    2014-01-21 10:45:59, Info                  CSI    00000005 No store version format found; DLL store format 0.0.0.6
    2014-01-21 10:45:59, Error                 CSI   
    00000006@2014/1/21:16:45:59.051 (F) base\wcp\componentstore\storelayout.cpp(3854): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey expression:
    (null)
    [gle=0x80004005]
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CBS.log to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140121102547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140114224141.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20140104132548.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131220204514.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Added C:\WINDOWS\Logs\CBS\CbsPersist_20131215075547.cab to WER report.
    2014-01-21 10:45:59, Info                  CBS    Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:45:59, Info                  CBS    Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
    2014-01-21 10:47:59, Info                  CBS    Trusted Installer is shutting down because: SHUTDOWN_REASON_AUTOSTOP
    2014-01-21 10:47:59, Info                  CBS    TiWorker signaled for shutdown, going to exit.
    2014-01-21 10:47:59, Info                  CBS    Ending the TiWorker main loop.
    2014-01-21 10:47:59, Info                  CBS    Ending the TrustedInstaller main loop.
    2014-01-21 10:47:59, Info                  CBS    Starting TiWorker finalization.
    2014-01-21 10:47:59, Info                  CBS    Starting TrustedInstaller finalization.
    2014-01-21 10:47:59, Info                  CBS    Ending TrustedInstaller finalization.
    2014-01-21 10:47:59, Info                  CBS    Ending TiWorker finalization.
    Is there a way to rebuild the component store?
    Thanks,
    Glen

    Hey Glen,
    This log shows the exact same error that is mentioned in the comments of
    this blog post, and the response is:
    joscon [Microsoft]
    joscon [Microsoft]
    Thanks.  Unfortunately, this isn't good news.  The CanonicalData key is missing.
    2013-08-05 11:08:32, Error                 CSI    00000004@2013/8/5:09:08:32.471 (F) base\wcp\componentstore\storelayout.cpp(3617): Error STATUS_SXS_COMPONENT_STORE_CORRUPT originated in function ComponentStore::CRawStoreLayout::OpenCanonicalDataKey
    expression: (null)
    [gle=0x80004005]
    Unfortunately, its a small, but unrecreatable subset of data.  If this is missing, servicing is broken on the machine and the system will need to be restored from backup or PBR.
    So you will need to try a refresh or a re-install of Windows, unfortunately.
    Hope this helps,
    David
    Windows Outreach Team - IT Pro
    The Springboard Series on TechNet

  • Windows Resource Protection could not perform the requested operation.

    A close friend's machine was blue screening on boot so he had me take a look at it.  The error in the BSOD indicated Windows was having trouble reading from the drive.  Although the drive wasn't clicking, based on what I was seeing, it seemed pretty
    clear the drive was on its way out.  I ran chkdsk, several times, and it found plenty of bad sectors but wasn't able to really fix anything.  Fortunately I was able to
    clone the drive using gparted
    run chkdsk
    fix the master boot record, boot sector and boot configuration data store
    run chkdsk again
    Now all is well
    Upon booting I noticed the system was dreadfully out of date: Firefox, Java, Reader, Flash - the works - so I updated all that.  I also noticed it was missing something like 50-70  Windows updates so I had to straight that right away.  It
    managed to install 15-20 before failing with 80070057.  This to me isn't too uncommon so I rebooted thinking it wouldn't choke next time. Much to my chagrin, any subsequent attempts fail with error 80070057.  I even tried installing just a few updates
    at a time, even just 1, and the error persists.  My assumption is that one or more files are maybe damaged and need to be fixed.
    I ran sfc /scannow and it gets to about 27%, then fails with "Windows Resource Protection could not perform the requested operation."  I did the following:
    backed up the existing CBS log
    ran sfc /scannow again
    watched the log in powershell via Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
    It started out strong
    PS C:\Windows\Logs\CBS> Get-Content C:\Windows\Logs\CBS\CBS.log -Wait
    2014-03-06 18:48:33, Info CBS Loaded Servicing Stack v6.0.6002.18005 with Core: C:\Windows\winsxs\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6
    002.18005_none_676975d87cc9b6e6\cbscore.dll
    2014-03-06 18:48:33, Info CSI 00000001@2014/3/6:23:48:33.027 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff3f53ae @0x7feff3c3ed1
    @0xffa949a8 @0xffa930c9 @0xffa93578)
    2014-03-06 18:48:33, Info CSI 00000002@2014/3/6:23:48:33.045 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff4386cf @0x7feff4125d9
    @0x7feff3c3feb @0xffa949a8 @0xffa930c9)
    2014-03-06 18:48:33, Info CSI 00000003@2014/3/6:23:48:33.048 WcpInitialize (wcp.dll version 0.0.0.5) called (stack @0x7fef0cf8c85 @0x7feff21838d @0x7feff2184ba
    @0xffa94207 @0xffa93125 @0xffa93578)
    2014-03-06 18:48:33, Info CBS NonStart: Checking to ensure startup processing was not required.
    2014-03-06 18:48:33, Info CSI 00000004 IAdvancedInstallerAwareStore_ResolvePendingTransactions (call 1) (flags = 00000004, progress = NULL, phase = 0, pdwDispo
    sition = @0xb8fad0
    2014-03-06 18:48:33, Info CBS NonStart: Success, startup processing not required as expected.
    2014-03-06 18:48:33, Info CSI 00000005 CSI Store 4751600 (0x00000000004880f0) initialized
    2014-03-06 18:48:38, Info CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:38, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:39, Info CSI 00000008 Repair results created:
    POQ 0 starts:
    POQ 0 ends.
    2014-03-06 18:48:39, Info CSI 00000009 [SR] Verify complete
    2014-03-06 18:48:39, Info CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:39, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:40, Info CSI 0000000c Repair results created:
    POQ 1 starts:
    POQ 1 ends.
    2014-03-06 18:48:40, Info CSI 0000000d [SR] Verify complete
    2014-03-06 18:48:40, Info CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:40, Info CSI 0000000f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:41, Info CSI 00000010 Repair results created:
    POQ 2 starts:
    POQ 2 ends.
    2014-03-06 18:48:41, Info CSI 00000011 [SR] Verify complete
    2014-03-06 18:48:41, Info CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:41, Info CSI 00000013 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:41, Info CSI 00000014 Repair results created:
    POQ 3 starts:..... and so on
    Until it hit a problem
    POQ 34 ends.
    2014-03-06 18:49:08, Info CSI 00000091 [SR] Verify complete
    2014-03-06 18:49:08, Info CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:08, Info CSI 00000093 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:09, Info CSI 00000094 Repair results created:
    POQ 35 starts:
    POQ 35 ends.
    2014-03-06 18:49:09, Info CSI 00000095 [SR] Verify complete
    2014-03-06 18:49:09, Info CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:09, Info CSI 00000097 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:10, Info CSI 00000098 Repair results created:
    POQ 36 starts:
    POQ 36 ends.
    2014-03-06 18:49:10, Info CSI 00000099 [SR] Verify complete
    2014-03-06 18:49:11, Info CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:11, Info CSI 0000009b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:12, Error CSI 0000009c@2014/3/6:23:49:12.802 (F) d:\longhorn\base\wcp\primitiveinstallers\filehierarchy.cpp(1939): Error STATUS_INVALID_PARAMETER originated in fun
    ction FileInstaller::CFileInstallerHierarchy::PortFileInformationBetweenCdfs expression: TmpBlob.Length == sizeof(LUACDF_FILE_ENTRY)
    [gle=0x80004005]
    2014-03-06 18:49:16, Error CSI 0000009d (F) STATUS_INVALID_PARAMETER #2119209# from CFileInstaller::CommitChanges(...)[gle=0xd000000d]
    2014-03-06 18:49:16, Error CSI 0000009e (F) STATUS_INVALID_PARAMETER #2119208# from PrimitiveInstaller::CCoordinator::FinalizeChanges(...)[gle=0xd000000d]
    2014-03-06 18:58:33, Info CBS Scavenge: Package store indicates there is no component to scavenge, skipping.
    I searched for "[SR]" but I didn't see anything of great interest
    C:\Windows\system32>findstr /c:"[SR]" %windir%\logs\cbs\cbs.log
    2014-03-06 18:48:38, Info CSI 00000006 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:38, Info CSI 00000007 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:39, Info CSI 00000009 [SR] Verify complete
    2014-03-06 18:48:39, Info CSI 0000000a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:39, Info CSI 0000000b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:40, Info CSI 0000000d [SR] Verify complete
    2014-03-06 18:48:40, Info CSI 0000000e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:40, Info CSI 0000000f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:41, Info CSI 00000011 [SR] Verify complete
    2014-03-06 18:48:41, Info CSI 00000012 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:41, Info CSI 00000013 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:41, Info CSI 00000015 [SR] Verify complete
    2014-03-06 18:48:42, Info CSI 00000016 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:42, Info CSI 00000017 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:42, Info CSI 00000019 [SR] Verify complete
    2014-03-06 18:48:42, Info CSI 0000001a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:42, Info CSI 0000001b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:44, Info CSI 0000001d [SR] Verify complete
    2014-03-06 18:48:44, Info CSI 0000001e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:44, Info CSI 0000001f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:45, Info CSI 00000021 [SR] Verify complete
    2014-03-06 18:48:45, Info CSI 00000022 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:45, Info CSI 00000023 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:45, Info CSI 00000025 [SR] Verify complete
    2014-03-06 18:48:46, Info CSI 00000026 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:46, Info CSI 00000027 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:46, Info CSI 00000029 [SR] Verify complete
    2014-03-06 18:48:47, Info CSI 0000002a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:47, Info CSI 0000002b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:47, Info CSI 0000002d [SR] Verify complete
    2014-03-06 18:48:48, Info CSI 0000002e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:48, Info CSI 0000002f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:48, Info CSI 00000031 [SR] Verify complete
    2014-03-06 18:48:48, Info CSI 00000032 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:48, Info CSI 00000033 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:49, Info CSI 00000035 [SR] Verify complete
    2014-03-06 18:48:49, Info CSI 00000036 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:49, Info CSI 00000037 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:50, Info CSI 00000039 [SR] Verify complete
    2014-03-06 18:48:50, Info CSI 0000003a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:50, Info CSI 0000003b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:50, Info CSI 0000003d [SR] Verify complete
    2014-03-06 18:48:51, Info CSI 0000003e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:51, Info CSI 0000003f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:51, Info CSI 00000041 [SR] Verify complete
    2014-03-06 18:48:51, Info CSI 00000042 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:51, Info CSI 00000043 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:52, Info CSI 00000045 [SR] Verify complete
    2014-03-06 18:48:52, Info CSI 00000046 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:52, Info CSI 00000047 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:52, Info CSI 00000049 [SR] Verify complete
    2014-03-06 18:48:53, Info CSI 0000004a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:53, Info CSI 0000004b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:53, Info CSI 0000004d [SR] Verify complete
    2014-03-06 18:48:54, Info CSI 0000004e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:54, Info CSI 0000004f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:54, Info CSI 00000051 [SR] Verify complete
    2014-03-06 18:48:54, Info CSI 00000052 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:54, Info CSI 00000053 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:55, Info CSI 00000055 [SR] Verify complete
    2014-03-06 18:48:55, Info CSI 00000056 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:55, Info CSI 00000057 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:55, Info CSI 00000059 [SR] Verify complete
    2014-03-06 18:48:56, Info CSI 0000005a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:56, Info CSI 0000005b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:56, Info CSI 0000005d [SR] Verify complete
    2014-03-06 18:48:56, Info CSI 0000005e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:56, Info CSI 0000005f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:57, Info CSI 00000061 [SR] Verify complete
    2014-03-06 18:48:57, Info CSI 00000062 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:57, Info CSI 00000063 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:48:58, Info CSI 00000065 [SR] Verify complete
    2014-03-06 18:48:58, Info CSI 00000066 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:48:58, Info CSI 00000067 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:00, Info CSI 00000069 [SR] Verify complete
    2014-03-06 18:49:00, Info CSI 0000006a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:00, Info CSI 0000006b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:00, Info CSI 0000006d [SR] Verify complete
    2014-03-06 18:49:01, Info CSI 0000006e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:01, Info CSI 0000006f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:01, Info CSI 00000071 [SR] Verify complete
    2014-03-06 18:49:02, Info CSI 00000072 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:02, Info CSI 00000073 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:02, Info CSI 00000075 [SR] Verify complete
    2014-03-06 18:49:02, Info CSI 00000076 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:02, Info CSI 00000077 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:03, Info CSI 00000079 [SR] Verify complete
    2014-03-06 18:49:03, Info CSI 0000007a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:03, Info CSI 0000007b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:04, Info CSI 0000007d [SR] Verify complete
    2014-03-06 18:49:04, Info CSI 0000007e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:04, Info CSI 0000007f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:05, Info CSI 00000081 [SR] Verify complete
    2014-03-06 18:49:05, Info CSI 00000082 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:05, Info CSI 00000083 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:06, Info CSI 00000085 [SR] Verify complete
    2014-03-06 18:49:06, Info CSI 00000086 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:06, Info CSI 00000087 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:06, Info CSI 00000089 [SR] Verify complete
    2014-03-06 18:49:07, Info CSI 0000008a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:07, Info CSI 0000008b [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:07, Info CSI 0000008d [SR] Verify complete
    2014-03-06 18:49:08, Info CSI 0000008e [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:08, Info CSI 0000008f [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:08, Info CSI 00000091 [SR] Verify complete
    2014-03-06 18:49:08, Info CSI 00000092 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:08, Info CSI 00000093 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:09, Info CSI 00000095 [SR] Verify complete
    2014-03-06 18:49:09, Info CSI 00000096 [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:09, Info CSI 00000097 [SR] Beginning Verify and Repair transaction
    2014-03-06 18:49:10, Info CSI 00000099 [SR] Verify complete
    2014-03-06 18:49:11, Info CSI 0000009a [SR] Verifying 100 (0x0000000000000064) components
    2014-03-06 18:49:11, Info CSI 0000009b [SR] Beginning Verify and Repair transaction
    C:\Windows\system32>
    I've run into sfc issues in the past, and in one instance, booting the OS install DVD, and running sfc /scannow /offbootdir=c:\ /offwindir=c:\windows did fix the issue.  But I have to ask
    Is there no way to do that while in Windows?  Can't I mount some WIM and do it that way instead of booting the DVD?
    Is that the right course of action, or is/are there some other options I should explore?
    Thanks for your time & guidance.

    Hi,
    In my opinion, if you want  SFC to use a sourcepath to repair your system, you can just use in-place upgrade to do this:
    How to Perform an In-Place Upgrade on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
    http://support.microsoft.com/kb/2255099
    If you have any feedback on our support, please click
    here
    Alex Zhao
    TechNet Community Support
    Thanks for taking the time to reply and for this suggestion.
    The in-place upgrade is a wonderful potential solution, but the process requires the source media.  Most systems these days don't include the OS or recovery CD's because the manufacturers want you to pay for them.  And most consumers aren't spending
    the $50-$70 dollars to get the media, which complicates things in situations like this.  So while they've purchased a machine and have a valid Microsoft COA sticker on the box, they can't do anything.
    Also, to make matters worse, I posted this in the wrong forum as this is a Vista Home Premium PC.  [My sincere apologies for that. Mods please feel free to move/reclassify]  I do have a Vista Home Premium DVD, but its the 32-bit version, not 64-bit,
    which is what this system is.  So unless I can locate a Visa Home Premium 64-bit DVD, or they upgrade to Windows 7 or 8 (which they probably should do anyway), we're sunk.

  • Role upload does not change the delta links

    Hi,
    We are using the Role upload functionality in the portal to upload BW roles by selecting the "Convert roles to worksets" and "Overwrite existing content" options.
    The newly created workset (corresponding to the uploaded role) is then copied and pasted as a delta link in another folder.
    We upload the BW role again whenever some changes are made to the original BW role (such as addition/deletion of reports).
    However, these changes are not getting reflected in the delta link (although the delta link dependency still exists).
    Does delta link work only for manual deletion/addition of portal content and the changes do not filter through using a role upload with overwrite?
    It is definitely not working for us using the role upload functionality and It seems that overwriting content using role upload does not impact the associated delta links.
    Any solution/workaround to this issue would be greatly appreciated.
    Regards,
    Vibhu

    Hi Vibhu,
    > Good to hear from you after such a long time
    Yeah, I didn't had that much time the last months, but at the moment, I'm trying to be back a bit
    > We investigated the problem further and found that it is only the deletions to a
    > BW role in the backend that do not get reflected in the delta link.
    >
    > The additions work fine.
    > It is defintely a bug.
    So it's up to SAP to fix it - and you could mark the thread as closed?!
    Best regards
    Detlev

  • Lsitener Issue -- TNS-01114: LSNRCTL  could not perform local OS

    Hi All,
    When I am trying to check status of listener with lsnrctl command, its getting errored out:
    bash-3.00$ lsnrctl status clonenew
    LSNRCTL for Solaris: Version 11.1.0.7.0 - Production on 19-JUN-2010 14:21:04
    Copyright (c) 1991, 2008, Oracle. All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROCtest))
    TNS-01114: LSNRCTL could not perform local OS authentication with the listener
    TNS-01115: OS error 28 creating shared memory segment of 129 bytes with key 510551698
    bash-3.00$
    I am not even able to stop this listener. All database connection are working fine.
    As per the tech note: *TNS-01114 and TNS-01115: Unable To Stop/Status An Oracle10g TNS Listener On Sun Solaris [ID 337056.1]* i verified all kernel parameters already set to a proper value.
    project.max-shm-ids
    privileged 256 - deny -
    system 16.8M max deny -
    RDBMS Version   -  11.1.0.7
    Platform            -  Sun Solaris sparc 5.10
    Any inputs in this issue is appreciated.
    Thanks in advance.

    01115, 00000, "OS error %s creating shared memory segment of %s bytes with key %s"
    // *Cause:  The shared memory segment could not be created as requested. For
    // example, a segment with the provided key may already exist, or the size may
    // be outside of system allowed range.
    // *Action: Use the error code to determine the exact cause of the problem. In
    // certain cases the problem may be resolved by adjusting the system-imposed
    // limits such as the maximum number of allowed shared memory segments, or
    // their maximum and minimum sizes. In other cases, resources need to be freed
    // up first for the operation to succeed.
    Problem is OS lack of available resource.
    Does more than 1 Oracle instance reside on this system?

  • Weblogic upgrade 9.2 - 10.2: Could not perform unpadding: invalid pad byte

    While upgrading a domain from 9.2 to 10.2, I get the following error on running upgrade.sh:
    -bash-3.00$ ./upgrade.sh
    Warning: Cannot convert string "-monotype-arial-regular-r-normal--*-140-*-*-p-*-iso8859-1" to type FontStruct
    Calling Wizard framework for upgrade: args2: [-mode=gui, -file=wcf/plugin_gui_wizard.xml, -log=/app/bea/bea_10.2/user_projects/upgrade_logs/domain_04292008_152323_1, -p:plugin:plugin.executionPlan.file=resources/portal-upgrade.xml, -p:plugin:I18N_PLUGIN=weblogic/upgrade/i18n_upgrade, -p:plugin:TARGET_VERSION=10.0.1.0]
    weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.validatePlatformDomain: Property set to skip platform domain validation. Skipping...
    <apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to:9.0>
    <apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <If not present, set the source WebLogic Configuration to:9.0>
    <apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /app/bea_domains/portal>
    <apr 29, 2008 3:23:56 PM CEST> <INFO> <Upgrade> <BEA-800000> <Domain directory selected: /app/bea_domains/portal>
    <apr 29, 2008 3:24:16 PM CEST> <FATAL> <Upgrade> <BEA-800000> <Execute Exception ... weblogic.descriptor.DescriptorException: Unmarshaller failed>
    com.bea.plateng.plugin.PlugInException: Execute Exception ... weblogic.descriptor.DescriptorException: Unmarshaller failed
    at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.execute(DomainDirectorySelectionPlugIn.java:261)
    at com.bea.plateng.wizard.plugin.silent.tasks.ExecutePlugInTask.execute(ExecutePlugInTask.java:76)
    at com.bea.plateng.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
    at java.lang.Thread.run(Thread.java:595)
    Caused by: weblogic.descriptor.DescriptorException: Unmarshaller failed
    at weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:152)
    at weblogic.descriptor.BasicDescriptorManager.createDescriptor(BasicDescriptorManager.java:292)
    at weblogic.management.provider.internal.DescriptorManagerHelper.loadDescriptor(DescriptorManagerHelper.java:58)
    at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.parseNewStyleConfig(DomainDirectorySelectionPlugIn.java:416)
    at weblogic.upgrade.domain.directoryselection.DomainDirectorySelectionPlugIn.execute(DomainDirectorySelectionPlugIn.java:226)
    ... 3 more
    Caused by: com.bea.xml.XmlException: weblogic.management.ManagementRuntimeException: weblogic.descriptor.DescriptorException: Unmarshaller failed: com.bea.xml.XmlException: java.lang.AssertionError: java.lang.reflect.InvocationTargetException
    at com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)
    at com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindingType.java:483)
    Caused by: weblogic.security.internal.encryption.EncryptionServiceException: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:78)
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:94)
    at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:87)
    ... 55 more
    Caused by: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
    at com.rsa.jsafe.JA_PKCS5Padding.a(Unknown Source)
    at com.rsa.jsafe.JG_BlockCipher.decryptFinal(Unknown Source)
    at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:68)
    ... 57 more
    Before running upgrade.sh, all applications were undeployed from the domain and I've verified that config.xml is valid with no refs to previously installed apps.
    I've also removed refs to custom security providers in config.xml, but stil the same.
    Can anyone please help?
    Edited by mirzaei at 04/29/2008 7:18 AM

    Fixed.
    The xml-file for one of the jdbc-resources defined in config.xml was missing from DOMAIN_HOME/conf/jdbc. Adding the file fixed the problem.
    Edited by mirzaei at 04/29/2008 11:07 AM

  • ERROR com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.

              Hi,
              I am trying to setup cluster environment with weblogic7.0. I have two managed
              servers in my cluster. The first one I am able start without any problem(The first
              server and admin is on the same UNIX m/c). When I am trying to start the second
              server from different m/c(this is another UNIX m/c) it is giving the following
              error. I am not using default security realm.
              If anybody come across this error before,please reply me.
              Thanks
              Venkat
              com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad
              byte.
              at com.rsa.jsafe.JA_PKCS5Padding.performUnpadding(JA_PKCS5Padding.java:111)
              at com.rsa.jsafe.JG_BlockCipher.decryptFinal(JG_BlockCipher.java:1092)
              at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
              at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
              at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:53)
              at weblogic.management.commo.CommoModelMBean.getAttribute(CommoModelMBean.java:319)
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              at $Proxy42.getCredential(Unknown Source)
              at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              --------------- nested within: ------------------
              weblogic.security.internal.encryption.EncryptionServiceException - with nested
              exception:
              [com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad
              byte.]
              at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
              at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
              at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:53)
              at weblogic.management.commo.CommoModelMBean.getAttribute(CommoModelMBean.java:319)
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              at $Proxy42.getCredential(Unknown Source)
              at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              --------------- nested within: ------------------
              javax.management.RuntimeOperationsException: RuntimeException thrown by the getAttribute
              method of the DynamicMBean for the attribute Credential
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1185)
              at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              at $Proxy42.getCredential(Unknown Source)
              at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              <Dec 7, 2002 8:57:33 PM EST> <Critical> <WebLogicServer> <000364> <Server failed
              during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
              Problem instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              attribute Credential
              weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              >
              <Dec 7, 2002 8:57:33 PM EST> <Emergency> <WebLogicServer> <000342> <Unable to
              initialize the server: Fatal initialization exception
              Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
              instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              attribute Credential
              weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              >
              The WebLogic Server did not start up properly.
              Exception raised:
              weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              Reason: Fatal initialization exception
              Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
              instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              attribute Credential
              weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              at weblogic.Server.main(Server.java:32)
              

    Venkat,
              I assume you are using symmetric ciphers. If soo make sure you
              generate the key for the admin server and copy that to all the managed
              servers in the cluster before you start each of the managed servers. I
              think you are generating keys for each server seperately (which might
              be the reason for the errors you got).
              Hope this helps.
              -Kiran
              "Venkat" <[email protected]> wrote in message news:<[email protected]>...
              > Hi,
              >
              > I am trying to setup cluster environment with weblogic7.0. I have two managed
              > servers in my cluster. The first one I am able start without any problem(The first
              > server and admin is on the same UNIX m/c). When I am trying to start the second
              > server from different m/c(this is another UNIX m/c) it is giving the following
              > error. I am not using default security realm.
              > If anybody come across this error before,please reply me.
              >
              > Thanks
              > Venkat
              >
              > com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad
              > byte.
              > at com.rsa.jsafe.JA_PKCS5Padding.performUnpadding(JA_PKCS5Padding.java:111)
              > at com.rsa.jsafe.JG_BlockCipher.decryptFinal(JG_BlockCipher.java:1092)
              > at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:67)
              > at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
              > at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:53)
              > at weblogic.management.commo.CommoModelMBean.getAttribute(CommoModelMBean.java:319)
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              > at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              > at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              > at $Proxy42.getCredential(Unknown Source)
              > at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              > at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              > at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > --------------- nested within: ------------------
              > weblogic.security.internal.encryption.EncryptionServiceException - with nested
              > exception:
              > [com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad
              > byte.]
              > at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:77)
              > at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:93)
              > at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:53)
              > at weblogic.management.commo.CommoModelMBean.getAttribute(CommoModelMBean.java:319)
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1183)
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              > at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              > at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              > at $Proxy42.getCredential(Unknown Source)
              > at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              > at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              > at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > --------------- nested within: ------------------
              > javax.management.RuntimeOperationsException: RuntimeException thrown by the getAttribute
              > method of the DynamicMBean for the attribute Credential
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1185)
              > at com.sun.management.jmx.MBeanServerImpl.getAttribute(MBeanServerImpl.java:1153)
              > at weblogic.management.internal.RemoteMBeanServerImpl.getAttribute(RemoteMBeanServerImpl.java:844)
              > at weblogic.management.commo.CommoProxy.invoke(CommoProxy.java:330)
              > at $Proxy42.getCredential(Unknown Source)
              > at weblogic.security.providers.authentication.LDAPAtnDelegate.<init>(LDAPAtnDelegate.java:452)
              > at weblogic.security.providers.authentication.LDAPAuthenticationProviderImpl.initialize(LDAPAuthenticationProviderImpl.java:67)
              > at weblogic.security.service.SecurityServiceManager.createSecurityProvider(SecurityServiceManager.java:1820)
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:151)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > <Dec 7, 2002 8:57:33 PM EST> <Critical> <WebLogicServer> <000364> <Server failed
              > during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
              > Problem instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              > RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              > attribute Credential
              > weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              > Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              > thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > >
              > <Dec 7, 2002 8:57:33 PM EST> <Emergency> <WebLogicServer> <000342> <Unable to
              > initialize the server: Fatal initialization exception
              > Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
              > instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              > RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              > attribute Credential
              > weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              > Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              > thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > >
              > ***************************************************************************
              > The WebLogic Server did not start up properly.
              > Exception raised:
              > weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              > Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              > thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              > Reason: Fatal initialization exception
              > Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
              > instantiating Authentication Providerjavax.management.RuntimeOperationsException:
              > RuntimeException thrown by the getAttribute method of the DynamicMBean for the
              > attribute Credential
              > weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
              > Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
              > thrown by the getAttribute method of the DynamicMBean for the attribute Credential
              > at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:198)
              > at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:248)
              > at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1574)
              > at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1376)
              > at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1315)
              > at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1432)
              > at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1157)
              > at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:697)
              > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:589)
              > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:277)
              > at weblogic.Server.main(Server.java:32)
              

  • I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

    I can´t initialise photoshop because of this Could not load actions because an unexpected end-of-file was encontered. "Could not initialise Photoshop because the preferences file was invalid (it has been deleted)" how can i fix it?

    I have a MacBook Pro.
    App - Adobe Creative suite 5.5
    The only app that does´t initialize is the photoshop
    Problem solve
    FAQ: How do I reset my preferences?
    Thank you Jeffrey Tranberry

  • DM Package error-Could not perform write (Not_Transactional)

    Hi!
    Has anyone received the error message "Could not perform write (Not_Transactional), when trying to load a basic import transaction data manager package? I have checked the Infocube status and it's set to u201CReal-Time Data Target Can BE Loaded With Data; Planning Not Allowedu201D. Any help would be appreciated. Thanks.

    Hi Dzmitry,
    Thanks for your suggestion. I tried to change the status and I received the following error message which would not allow me to change the status. Any other thoughts?
    "Request APO_RD6ZZQMEQGBIUB8QFGSS0YZ4KP(000000002: is yellow or red in Infocube /CPMB/H61H5TU; cannot switch to planning"
    Thanks for your help.
    Nakisha

  • Item Could not commit action because it is currently in focus error.

    Hi experts,
    we developed addons for our client in 2007 B version.
    Recently we upgraded our client server from SAP 2007B to 8.8.
    The addons worked fine in 2007B.when we upgraded to 8.8 the error is occuring like
    "Item-could not commit action because item is currently in focus [66000-23]"
    when i disable a textbox(already it is focus) in my form the above  error is occuring.
    But this error was not happened with  2007B.
    Please tell me is there any solution with out changing the code(i am unable to change the code).
    Thanks in advance.
    Edited by: vivek.Y on Jun 11, 2011 5:15 PM

    Hi Jonathan,
    Besides setting the focus and trying to disable the control, it was still throwing exception. So I tried a following:
    Work around for this issue.
                                        Try
                                            oForm.Items.Item("ControlWithFocus").Enabled = False
                                        Catch ex As Exception
                                            Dim oItem As Item = oForm.Items.Item("AnyOtherItem")
                                            oItem.Click(BoCellClickType.ct_Regular)
                                            oForm.Items.Item("ControlWithFocus").Enabled = False
                                        End Try
    This is a trick where you can set focus to another control and set enable to false.
    Hope this helps.
    Regards,
    Kashif Ali
    Edited by: Kashif Ali on Sep 21, 2011 11:43 AM

  • Could not commint action because item is currently in focus

    Hi,
    I have 2 scenarios  new and existing in exiting i will show grid and in new edit box.
    I f user is in edit box and select existing radio button then i am getting bellow error.
    "could not commit action because item is currently in focus". kindly help me how to disable item when there is a focus.

    Hello,
    You can use the click sub to set the focus.
    So put a EditText into you screen, and when you would like to disable your item, move the cursor to the EditText
    oform.items.item("DUMMYEDITTEXT").Click ()
    'Now you can disable to the item you wanted.
    Best Regards,
    János

  • Com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid

    Hi all,
    While running(deploying to default server) ADF application in defalt server I am getting error.
    com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
         at com.rsa.jsafe.c.a(Unknown Source)
         at com.rsa.jsafe.JSAFE_SymmetricCipher.decryptFinal(Unknown Source)
         at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:124)
         at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:184)
         at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
         Truncated. see log file for complete stacktrace
    Caused By: com.rsa.jsafe.JSAFE_PaddingException: Could not perform unpadding: invalid pad byte.
         at com.rsa.jsafe.c.a(Unknown Source)
         at com.rsa.jsafe.JSAFE_SymmetricCipher.decryptFinal(Unknown Source)
         at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptBytes(JSafeEncryptionServiceImpl.java:124)
         at weblogic.security.internal.encryption.JSafeEncryptionServiceImpl.decryptString(JSafeEncryptionServiceImpl.java:184)
         at weblogic.security.internal.encryption.ClearOrEncryptedService.decrypt(ClearOrEncryptedService.java:96)
    could anyone pls suggest me the solution.?
    thanks
    santosh

    Santhosh,
    did you try Google for com.rsa.jsafe.jsafe_paddingexception weblogic ? Why not? I typed it in and found a bunch of hits, including this one
    http://weblogic-wonders.com/weblogic/2010/11/04/com-rsa-jsafe-jsafe_paddingexception-could-not-perform-unpadding-invalid-pad-byte/
    Frank

  • Could not perform unpadding: invalid pad byte.

    Hello All
    In my config file I have 2 references to connection pool files.. In the files I have the following tag.
    <password-encrypted>{3DES}I8OqBHafh35fn6iVd6YXxw==</password-encrypted>
    When I try to run my connection pools are not getting initalized and the following error is displayed
    Could not perform unpadding: invalid pad byte.
    From my limitied knowledge I would just liek to change this to clear text or reencrypt the password. Can anyone help or send a link to an article that would help?
    I am running weblogic 9.2
    Thanks

    You can use the encrypt utility to reencrypt the password.
    http://edocs.bea.com/wls/docs90/admin_ref/utils.html#1209592
    D Walt wrote:
    Hello All
    In my config file I have 2 references to connection pool files.. In the files I have the following tag.
    <password-encrypted>{3DES}I8OqBHafh35fn6iVd6YXxw==</password-encrypted>
    When I try to run my connection pools are not getting initalized and the following error is displayed
    Could not perform unpadding: invalid pad byte.
    From my limitied knowledge I would just liek to change this to clear text or reencrypt the password. Can anyone help or send a link to an article that would help?
    I am running weblogic 9.2
    Thanks

  • I have this message today: Could not load actions because an unexpected end-of-file was encountered.

    i have this message today and I don’t know what to do, I have PS CC : Could not load actions because an unexpected end of file was encountered

    See whether a reset of Preferences solves the problem
    A logical next step would be to reset your Preferences.
    To reset Preferences:
    If Photoshop is already open on your screen, close it (Quit). Then hold down Shift+Ctrl+Alt (Win) / Shift+Command+Option (Mac) on your keyboard and start Photoshop.
    A dialog box will pop up asking if you want to delete the existing Preferences file (the "Settings"). Click Yes in the dialog box. The existing Preferences file will be scrapped and a new one will be created.

  • Could not load actions because an unexpected end of file was encountered, resetting preferences doesn't work, whats next?  PC windows 8 PS CC

    I tried the ctrl alt shift and click yes to delete preferences and it didn't work.   Where are my actions?   I have no issues with disc space etc (over 500 free) Any help is greatly appreciated as I have many edits to get to customers

    Have you taken a look at this thread? Could not load actions because an unexpected end-of-file was encountered.
    Benjamin

Maybe you are looking for

  • This Newbie Has Questions

    Hi there. I am a newbie to Apple. I purchased the iBook last month and of course, when the MacBook (which had the features I wanted) came out, I rushed out and got one and I'm very pleased with my purchase - but I have a few "newbie" questions: 1) Pr

  • HT1351 iTunes won't sync a tv show to my iPod Classic

    I just bought a new tv show from iTunes the other day. When I connect my ipod classic to iTunes, it automtically adds all new media that I've download to iTunes. But now I get this alert message telling me that the tv show I just bought, on iTunes, c

  • Hide Repeating Frames based on data value

    Hello, Wonderful forum. Hope someone out there can give us input on this one. We have a report where we would like to show a different layout depending on the data value from the master query. One layout occupies a full 8X11 page and the second layou

  • Having the '\' character in a string

    I get errors when I try to construct a string, say like this: String blahblah = new String("IBM\ROOT\IMAGE"); Basically it seems like I can't store that '\' character in a string at all. Is this true? Thanks in advance.

  • Why is my final swf so slow/stuttering?

    Need help cause Im going out of my mind. I have created a webpage with some frame by frame animations and I've tried it in Flash at different simulated download speeds and it works perfect. But when uploaded to internet it runs like slowmotion in bot